We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,913 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
MAX DIAMETER 550 MAX MODULE 6
used
MAX DIAM 550 MAX MODULE 6
used
Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...
used
CNC controller: FANUC 15i-M Axes; X-axis travel mm: 9.000 Y-axis travel mm: 3.900 Z-axis travel mm: 900 W-axis travel mm: 1.600 (distance between columns 3.100 mm) Distance spindle nose - table surface mm: 2.440 Feed rates m/min: 6 (X,Y,Z) 3 (W) Rapid traverse m/min: 20/9 (X,Y) 10(Z) 6(W) Worktable; Number of pallets: 2 (table automatic changer) Table dimensions mm: 2.700x8.000 Max. workpiece weight kg: 20.000 Spindle; Spindle speed rpm: 5-3.000 (2 ranges) Spindle drive power kW: 30(50% ED)/22 Spindle torque Nm: 2.170 Tool system; Tool holder: MAS BT50 Tool magazine slots: 180 Equipment; Chip conveyor Signal lamp High pressure pump Tool breakage probe Preapared for RENISHAW sonde RENISHAW Measuring probe Rated power kVA: 150 AAC (Automatic Attachement Changer): Capacity = 5 Attachements and their cases: 1) Snout 190 2) Small Angle head 5 Faces Cutter Head ...
used
Spindle diameter: 120 mm Cross X: 3500 mm Vertical Y: 2500 mm Table length: 2200 mm Table width: 1800 mm Positions ATC: 60 Number of pallets: 1 CNC Brand: Heidenhain X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 3000Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate ...
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg
used
grinding diameter: 500 mm grinding length: 2900 mm centre height: 250 mm Control: Siemens Sinumerik 840D centre distance: 3000 mm stroke of the table: max. 3200 mm table feed: 0,001 - 4000 mm/min rapid traverse of table: 9 m/min table swivelling +/-: +4/-2 Grad grinding wheel size: 500x100x203 mm peripheral speed: 18 - 36 m/sec spindle speeds: 6 - 900 U/min grinding head swivelling: 90 Grad tailstock quill taper MT: 5 tailstock quill stroke: 80 mm grinding spindle drive: 9,5 kW working spindle drive: 0,1 - 3,1 kW hydraulic motor: 2,2 kW max. workpiece weight between centers: 500 kg workpiece weight in steadies max.: 840 kg total power requirement: 58 kVA weight of the machine ca.: 14,1 t dimensions of the machine ca.: 8,9 x 3,42 x 1,94 m CNC control SIEMENS SINUMERIK 840D with operating panel OP 10 and color flat screen TFT 10,4 with machine control panel MPC 19 remote control panel ...
used
turning diameter over bed: 500 mm turning diameter over slide rest: 320 mm turning length: 1000 mm centre height: 250 mm centre distance: 1000 mm spindle bore: 56 mm spindle turning speed range: 14 - 2240 U/min spindle nose: DIN 55027 Gr. 6 feeds - longitudinal: 0,023 - 4,8 mm/U feeds - cross: 0,011 - 2,4 mm/U face slide travel: 300 mm upper slide travel: 140 mm thread - mm pitch: 0,25 - 60 mm thread - inch: 120 - 1/2 Gg/ thread - module: 0,125 - 15 mm tailstock quill diameter: 80 mm tailstock quill stroke: 180 mm tailstock taper MT: 5 total power requirement: 7,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 2,42 x 1,23 x 1,93 mm Accessories: 3-jaw chuck 250 mmø, MULTIFIX-toolpost with various inserts, drill chuck, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
MAX DIAM 500, MAX MODUL 8 , PLC , DRO
used
Including chipconveyor Swing over bed: 630 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 500 mm Max cross travel X-axis: 320 mm Dia of spindle bore: 92 mm Power on the spindle: 17 kW Number of speeds: 2 > 3000 rpm Command: Siemens Sinumerik 810D Total power needed: 52 kVa Length: 5500 mm Width: 2200 mm Height: 2100 mm Weight: 6,6 ton Toolchanger: yes Number of tools: 12 positions
used
Key data: 1600 mm, 460 mm, 16
3 x heads , change gears
used
Manufacturer: Toshiba, Type: EX 40-4MCRD2, Modell: Programmmable Controller, Seriennummer: 94N-2025,
used
Manufacturer: Toshiba, Type: Programmable Controller, Modell: EX20-1MCRB5, Seriennummer: 5602167,
used
Carousel lathe - Single column SKIQ 12 CNC Manufacturer: TOSHulin Year: 1989/ GC: 2010 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 1500mm Table diameter... 1250mm Max. table load ... 12000kg Max. workpiece height ... 1570mm Axis Z... 1000mm Average of the grinding piece ... 800mm Number of positions in the tool changer ... 15 Face plate diameter ... 1250mm Max. ram stroke ... 1000mm Max. workpiece weight ... 8000kg Rapid traverse ... 8000m/min Total Power Requirement ... 63kVA Main engine power ... 40kW Machine weight... 22000kg The machine is in good condition, possible to test under electricity.
used
Drilling capacity: 30 mm Throat: 30 mm Spindle taper: 30 CNC Brand: Heidenhain CNC Model: HeidenHain TNC 430 5 Axis CNC Horizontal borer Spindle Hours 18.300 Optional HU 50 Universal milling head ( rotation 1 direction C-Axis) Hydraulic tool clamping External coolant system X - Travel: 1250mm Y - Travel: 900mm Z - Travel: 630mm W - Travel: 1000mm Table Length: 1120mm Table Width: 1000mm Table load: 3000 Speeds / ranges: 2500Rpm Power: 30kW Spind ...
used
core boring: 70-560 mm bore depth: 20000 mm drilling diameter: 70-500 mm core boring capacity in St 60 - reboring: special: 560-1000 mm workpiece diameter: 3200 mm workpiece weight: 200 t faceplate diameter: 2900 mm speed of boring spindle:: 100 - 500 U/min feed range: 3 - 2000 mm/min boring spindle drive: 55 kW spindle head drive: 150 kW workpiece turning speeds: 230 U/min control: Fanuc total power requirement: - kW weight of the machine ca.: - t 2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm spindle taper ISO: 40 spindle turning speed range: 50 - 2500 U/min table-size: 600 x 250 mm table load: 75 kg power capacity: 1,5 kW quill stroke: 80 mm voltage: 400 V feed: 8 - 400 mm/min total power requirement: 4 kW weight of the machine ca.: 950 kg dimensions of the machine ca.: 1,70x1,30x1,20 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Adjustment: SK50 -Tip height: 145 mm -Part head: swiveling, rotatable -Dimensions: 220/220/H285 mm -Weight: 17 kg
used
Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: mm -Passage: Ø 32 mm -Part head: swiveling -Dimensions: 430/430/H280 mm -Weight: 83 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 200 mm -Plating: brass -Tip height: 230 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 530/200/H740 mm -Weight: 100 kg
used
Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: 100 mm -Part head: swiveling -Dimensions: 320/320/H230 mm -Weight: 37 kg
used
Horizontal boring mill WHO11NC
used
MAX DIAM 500, MAX MODUL 8 , MAX STROCE 125 , SINUMERIC 840 D
used
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1250 mm w-axis: 800 mm b-axis: 360 ° output: 85 KVA table-size: 1800x1800 mm table load: 12 t spindle taper ISO: 50 table rotation: 360x0,0001 ° spindle motor: 37 kW spindle turning speed range: 1500 U/min feed range: 4-8000 mm/min electrics - voltage/frequency: 400 / 50 V/Hz weight of the machine ca.: 35 t dimensions of the machine ca.: 7x7x6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
I offer those interested a used rotary table from the HP100 horizontal boring machine. The size of the table is 2200x2200 mm, weight 14,000 kg, rotation on a ruler + optically adjustable by 90°, linear measurement in the direction of table movement. Load capacity over 4,000 kg. Motor/manually controlled feed and rotation. Sliding guide in condition according to the photo. Fully functional. We are replacing it with a table with a rotary sensor. Available immediately. (it will be connected until 12/10/2022 and can be demonstrated)
used
Grinding diameter: 630 mm Grinding length: 2000 mm Peak height: 320 mm Table speed - without steps: 0.005-5 m / min Longitudinal table movement min./max.: 5/3350 mm Table speed: 8 m / min Grinding headstock-cross movement: 420 mm Workpiece headstock motor: 3,0 kW Grinding headstock-motor power: 22 kW Motor of the internal grinding device: 3 kW Lubricating pump motor: 0,11 kW Machine weight approx.: 15700 kg Space requirement approx.: H1970 / B3100 / L12650 mm
used
power supply 380 V weight 1520 kg power of the grinding wheel spindle 2.2 kW workpiece spindle power 0.37 kW grinding spindle speed 2100-2800 rpm. Rotation of the grinding wheel headstock 60 ° Table rotation 10 ° Rotation of the headstock of the workpiece 90 ° Maximum diameter of the ground object 160 mm Maximum center distance 320 mm
used
- With 6 filling valves Dimensions: - Length: 1000 mm - Width: 500 mm - Height: 1000 mm - Weight: approx. 80 kg
used
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1250 mm work spindle diameter: ISO50 mm spindle turning speed range: 10-2500 U/min Control: TNC 430 Heidenhain total power requirement: kW weight of the machine ca.: ca. 38 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Control Heidenhain TNC 407 Year 1996 Workpiece weight 2200 kg X=1250mm Y=1125mm Z=950mm Machine can be checked under power
used
Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg
used
Key data: 130 , 3500 , 2000
CNC SIEMENS 840D X-axis (longitudinal) 3500 mm Y-axis (transverse) 2000 mm Z-axis (vertical) 1250 mm Table length 1800 mm Table width 1800 mm Maximum workpiece weight 12000 kg Spindle diameter 130 mm Maximum spindle speed 800 rpm Magazzino utensili 52 posti Spindle motor 37 kW Year of revision 2005 ------------------- Length x width x height 7200 × 7800 × 4900mm Weight 32000 kg
used
Toshiba B-EX4D2 Direct Thermal Label Printer -Printing technology: Direct thermal -Resolution: 203 dpi -Max. print speed: 305mm/sec -Max. print width: 104mm -Max. print length: 1,498mm -
used
Offer 24001 Specifications: - Working width 3050 mm - Printing capacity 220 t - Passage between uprights 2550 mm - Table width 405 mm - Projection 350 mm - Installation height approx. 240 mm - Plunger stroke 270 mm - Working height approx. 920 mm - Engine power approx. 15 kW - Oil filling approx. 300 l - Space requirement approx. W 4200 x H 2980 x D 2300 mm - Weight approx. 12500 kg - With: - Swivel arm – control panel with CYBELEC control - for 4 axes Y1 + Y 2 , X , Z -Mot. Back gauge with mot. Controlled height adjustment - Crowning - Safety – light barrier - 4-fold universal die + divided. Sharpening tool 3000 mm - Deer foot tools, V – dies 2900 mm - Other tool sections - E.- Footswitch, - Support arms
used
CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...
used
Key data: 180 mm, 360 mm, 14 U/min
Center height 180 mm Center width 750 mm Circulation diameter over bed 360 mm Spindle bore 41 mm Spindle speed range, stepped 14 – 2,800 rpm Machine weight 1.9 t Connected load 6.5 kW
used
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table-size: 800x400 mm quill stroke: ca. 100 mm turning speed - milling spindle: 40-2000 U/min feed range: X, Y: 8-400 mm/min feed range: Z: 4-200 mm/min rapid travel - x-direction: 2000 mm/min rapid travel in y-direction: 2000 mm/min rapid traverse cross: 1000 mm/min vertical head swivelling: +/- 90 Grad weight of the machine ca.: 2 t dimensions of the machine ca.: 2,1x1,7x1,7 m Universal milling machine with DRO for 3 axis, sviweable vertical milling head and horizontal milling spindle. -incl. knee and milling 3 arbors for milling discs -incl. 9 tool holder ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 quill stroke: 100 mm spindle turning speed range: 40 - 2000 U/min voltage: 380 V Table dimensions: 800 x 400 mm weight: 1,9 t total power requirement: 3,0 kW dimensions of the machine ca.: 1,90 x 1,80 x 1,90 m digital readout, 3-axis: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine status: brand new, in working condition. Year: 2021 Reason for sale: the machine doesnt perform the functions needed for our production cycle (not included in the scope and impossible to add). Ownership: Spetztekhosnastka Ltd., Ukraine Detailed machine specifications will be provided on request.
used
Description: Tool holder: SK 40 Spindle speed: 315 - 2000 rpm Table dimensions: 700 x 300 mm With 6 grooves and an attached machine vice Jaw width: 125 mm Travel distances: X: approx. 400 mm Y: approx. 300 mm Z: approx. 300 mm The machine is equipped with a three-axis digital display weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 2,000 mm
used
cutting width 350 mm cutting height 120 mm engine power 30 kW max. blade diameter 400 mm feed continuously adjustable up to 60 m / min spindle diameter 60 mm sleeve diameter 80 mm table top dimensions 960 x 2100 mm max. workpiece width 550 mm min. workpiece length 800 mm three rows of pawls two top rollers stub diameter 2 x 150 mm dimensions of the machine (length / width / height) 250/245/220 cm weight ~ 1800 kg
used
track width 440 mm cutting height 55 mm - 200 mm disc diameter 320 mm 2 x 75 kW main engines 3 kW feed motor feed speed adjustable on the inverter up to 60 m / min the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 5120 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs are installed. Depend ...
used
Toshiba IS 450 GSW injection molding machine Year of production - 2007 Parameters: Closing force: 4,410 kN Screw diameter: 70 mm Injection volume: 1480 cm³ Shot weight: 1360 g Min.height of the fastening plate: 1230 mm Min.width of the fastening plate: 1230 mm The distance between the columns - 870X870 mm Ejector force: 243 kN Ejector stroke length: 1050 mm Maximum injection pressure: 178 MPa Oil tank capacity - 1500 liters Machine length: 7600 mm Machine width: 2200 mm Machine height: 2100 mm Injection weight: 22,000 kg Machine with a robot and a cage
used
Manufacturer / type Toshiba IS650GTW i59 Closing force [tons] 650 Year of production 2007 Screw diameter [mm] 95 Number of aggregates 1 type of screw Type: 95DBG-AT, Part # F049997, Stellite12 The minimum height of the mold [mm] 450.0 weight [kg] 32100 installed power kW 101.2 thermal insulation on the aggregate - blanket on the aggregate upper / lower YES nominal power of heaters for units KW 43.95 length mm 7940 width mm 2670 height mm 2300 occupied area of 21.2 m² occupied area with a cage 32.0 m² hydraulic pump 1 SQP43-50 hydraulic pump 2 SQP43-50 MC09 robot (W 733-0610)
used
Description: The machine is in good technical condition. Working spindle diameter: 110mm Table clamping surface: 1250 x 1250mm Machine dimensions lxwxh, 5290x4063 mm. Machine weight, 27000 kg By prior arrangement, the possibility of a tour in progress.
used
Location: Czech Republic Description: Working spindle diameter 100 mm X-axis travel 1250 mm Travel of the Y axis 1100 mm Spindle speed 10 - 1200 /min. Central cooling does not Spindle extension (W) 630 mm Z axis travel 970 mm The toolbox does not Spindle clamping cone ISO 50. Power of the main electric motor 22 kW Table clamping surface 1000 x 1120 mm Max. workpiece weight 3000 kg Dimensions L x W x H 4746 x 3000 x 3340 mm Machine weight 13700 kg
used
Working spindle diameter: 75mm Table clamping surface: 950x950mm Digital measuring X-axis travel 1,250 mm Y-axis travel 900 mm Z-axis travel 1,060 mm Spindle speed 18 - 1800 /min. Spindle extension (W) 560 mm Power of the main electric motor 11 kW Max. table load 3,000 kg Dimensions LxWxH 4500 x 3400 x2800 mm Machine weight 10t Inspection possible upon agreement. Accessories: support column
used
Machine weight: 38000 kg Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 1800 rpm Table clamping surface: 1800 x 1600 mm Transverse table movement - x axis: 3500 mm Longitudinal table movement - z axis: 2000 mm Vertical table movement - y axis: 2500 mm
used
The machine is in good technical condition. Table working area: 950 x 950 mm Maximum table load: 3000 kg Maximum tool speed: 1800 rpm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Spindle extension W: 560 mm Po by prior arrangement, the possibility of a tour in progress.