tornos deco 2000 used for sale

bar material dia.: 32/36 mm spindle passage: 42 mm turning length: 220/100 mm turning speeds: 8000 U/min gripping station: 32/36 mm turning speeds: 8000 U/min number of tools: 38 number of milling stations: 27 control: Fanuc 31i-B5 Number of axles: 9+2x C-Achse St. chip conveyor: Knoll Number of working hours: 22981 h high-pressure pump: 340 bar total power requirement: 10 kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: 3 x 1,65 x 2,44 + Irco m spindle hours: 10575 h bar loader: Breuning Irco 3,2m Stange fire distinguisher: ja/yes KRAFT & bAUER parts conveyor: ja/yes tool breakage detector: ja/yes CNC sliding headstock lathe Tornos SwissDECO 36 G, year 2018, installation december 2018, with multi-channel loading magazine Breuning-Irco Tornos SwissDECO 36G can work with guide bush 32mm (sliding headstock lathe) or without guide bush 36mm (short lathe). Machine ON/OFF: ...

Z1 axis travel (mm) 230 Bar passage (mm) 20 (25.4) Maximum main spindle speed (RPM) 10,000 Main spindle power (Kw) 3.7 / 5.5 Number of tools for machining on headstock 14 Number of radial driven tool holders 4 Number of axial driven tool holders 4 Maximum speed of driven tool holders 10000 Operations on counter spindle Bar passage (mm) 20 (25.4) Maximum main spindle speed (RPM) 10,000 Main spindle power (Kw) 3.7 / 5.5 Number of tools for machining on headstock 8 Number of radial driven tool holders 4 Number of axial driven tool holders 4 Maximum speed of driven tool holders 10000 General characteristics Number of linear axes 6 Rapid movements (m / min) 30 Weight (Kg) 3000 Installed power (Kva) 14 Fanuc 31 control i TORNOS ROBOBAR SBF – 532 bar loader

Tornos Multiswiss 8x26, Year of construction 2018, Control Tornos, 1 x counter spindle, 4 x reverse machining, Parts tape, 2 x 80 bar high-pressure pumps, fire extinguishing system, Bkhjrdnfq8o hinged belt conveyors, Bar feeders, paper tape filters,

Machine description - (Partial excerpt, further details on request):, - 6 motor spindles 5.5 kW max. speed 8,000 rpm., - Spindle capacity 16mm, Z 50mm stroke;, - 6 carriages X 40mm stroke, - 1 slide for counter operation, 75mm stroke., - Counter spindle with integrated motor 6 kW, - Max. speed 8,000 rpm, 150mm stroke,, - Rotating ejector with HP flushing, - Fanuc 30i numerical control, - Parts disposal and pneumatic, - Slide plastic coated, - Outer distribution belt greater capacity, - Active bar advance device, - Collets type F16 for active, - Bar preferential device, - Various Tension and reduction tubes, - Turning tool holder base (16x16), - Cross drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Front drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Electrical control cabinet, - Oil container 1,100 liters, - Coolant pump 100 l/min., 4 bar, - Paper filter system 5 ...

This TORNOS MultiSwiss 8x26 Lathe was manufactured in the year 2018. It is equipped with a Kraft & Bauer fire extinguishing system and a hinged belt conveyor. It is included all existing machining units and accessories. The machine is under power and immediately available.

This TORNOS Swiss DT 13 Swiss Type Turning was manufactured in the year 2016 and has 15476 production hours. It is equipped with a Fanuc 31i-B control unit. Disposes of a Kraeft & Bauer fire extinguishing system in all fully CNC axes. It is included with all existing machining units and accessories. The machine is under power and immediately available.

Tornos EvoDECO 16/10 CNC sliding head lathe CNC control Fanuc 31i-B5 Number of axles 10 Diameter of the spindle bore 16 mm Standard workpiece length with rotatable guide bushing 180 mm Spindle speed 0 - 12,000 rpm Spindle motor 12 / 9.8 kW Spindle speed counter Spindle 0- 12,000 rpm Minimum indexing C-axis main spindle 0.001° Minimum indexing C-axis counter spindle 0.001° Number of tools on the guide bush 10 | 2x 5 Positions of the tools on the guide bush 6 | 2x 3 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 0.55 / 1.1 kW Number of tools on the end device 4 Positions for rotating tools on end attachment 3 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 0.55 / 1.1 kW Number of tools in secondary operation 6 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 1.5 / 2.2 kW Positions for Rotating Tools i ...

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

-Tischabmessung 800 x 380 mm -Formattisch 2000 x 270 mm -Besäumlänge 2000 mm -Max. Sägeblattdurchmesser 315 x 30 mm -Max. Schnitthöhe 90C / 45C 100 / 80 mm -Schnittbreite am Parallelanschlag 1250 mm -Tischhöhe 850 mm -Tischverlängerung 500 x 310 mm -Tischverbreiterung 800 x 880 mm -Auslegertisch mit Rolle 750 x 580 mm -Drehzahl Hauptsägeblatt 4500 U/min -Drehzahl Vorritzsägeblatt 8500 U/min -Vorritzsägeblatt 2-100 x 20 mm -Absaugstutzendurchmesser 100 mm -Motor-Abgabeleistung S1 100% 3,8 kW -Spannung 400 V -Maschinenabmessung (L x B x H) 2000 x 2800 x 1100 mm -Gewicht 310 kg komplett mit: -Aluminium-Formatschiebeschlitten mit gehärteten Führungsleisten -Stabiler Auslegertisch zum Bearbeiten von großen und schweren Platten -serienmäßig mit Tischverbreiterung und -verlängerung ausgestattet -Gehrungsanschlag und Niederhalter über die gesamte Schlittenlänge verschiebbar -S ...

Säge: -Tischabmessung 860 x 450 mm -Tischhöhe 850 mm -Tischverlängerung 500 x 310 mm -Tischverbreiterung 800 x 880 mm -Auslegertisch mit Rolle 750 x 580 mm -Formattisch 2000 x 270 m -Besäumlänge 2000 mm -Max. Sägeblattdurchmesser 315 x 30 mm -Max. Schnitthöhe 90C/45C 100 / 80 mm -Schnittbreite am Parallelanschlag 1270 mm -Drehzahl Hauptsägeblatt 4500 U/min -Drehzahl Vorritzersägeblatt 8500 U/min -Durchmesser Vorritzersägeblatt 2-100 x 20 mm -Absaugstutzendurchmesser 100 mm -Motor-Leistung S1 100% 3,8 kW Fräse: -Spindeldurchmesser 30 mm -Höhenverstellung 100 mm -Tischöffnungen diam. 80 / 100 / 140 / 190 mm -Aufspannlänge der Spindel 100 mm -Max. Werkzeugdurchmesser -beim Profilieren 180 mm -beim Zapfenschneiden 200 mm -Spindeldrehzahl 1800 / 3000 / 6000 / 9000 U/min -Motor-Leistung S1 100% 2,8 kW -Spannung 400 V -Abmessung (B x T x H) 2000 x 3010 x 1250 mm -Gesamtgewicht 400 ...

Fig.1 screen master 2000 Regulating, control and recording device was used in a dairy to control and record the milk heater.

Säge-Fräse-Abricht-Dickte-Langloch Technische Daten: Abichthobel: -Arbeitsbreite max. 320 mm -Gesamttischlänge 1500 mm -max. Spanabnahme 5 mm -Abmessung Abrichtanschlag 1100 x 155 mm -Abrichtanschlag 90C-45C schwenkbar -Sicherheitsmesserwelle mit Wendehobelmesser FI 100 mm, Z 3 -Drehzahl 4600 U/min. -Motor Abrichte und Dickte 2,2 kW / 230 V Dickenhobel: -Arbeitsbreite max. 316 mm -Länge des Dickentisch 600 mm -max. Spanabnahme 4 mm -min. / max. Durchlasshöhe 4 / 230 mm -Vorschubgeschwindigkeit 7 m/min. -Absaugstutzen FI 120 mm Kreissäge: -max. Schnittlänge 2000 mm -max. Schnittbreite 630 mm -max. Schnitthöhe 90C 102 mm -max. Schnitthöhe 45C 72 mm -min. / max. Sägeblattdurchmesser FI 250 / FI 315 mm -Drehzahl 4000 U/min. -Länge Parallelanschlag 1100 mm mit Feineinstellung -Sägeblatt schwenkbar 90C - 45C -Motor 2,2 kW / 230 V -Absaugstutzen FI 120 mm -Vorritzaggregat 0,75 kW, D ...

Säge-Fräse-Abricht-Dickte-Langloch Technische Daten: Abichthobel: -Arbeitsbreite max. 320 mm -Gesamttischlänge 1500 mm -max. Spanabnahme 5 mm -Abmessung Abrichtanschlag 1100 x 155 mm -Abrichtanschlag 90C-45C schwenkbar -Sicherheitsmesserwelle mit Wendehobelmesser FI 100 mm, Z 3 -Drehzahl 4600 U/min. -Motor Abrichte und Dickte 3,0 kW / 400 V Dickenhobel: -Arbeitsbreite max. 316 mm -Länge des Dickentisch 600 mm -max. Spanabnahme 4 mm -min. / max. Durchlasshöhe 4 / 230 mm -Vorschubgeschwindigkeit 7 m/min. -Absaugstutzen FI 120 mm Kreissäge: -max. Schnittlänge 2000 mm -max. Schnittbreite 630 mm -max. Schnitthöhe 90C 102 mm -max. Schnitthöhe 45C 72 mm -min. / max. Sägeblattdurchmesser FI 250 / FI 315 mm -Drehzahl 4000 U/min. -Länge Parallelanschlag 1100 mm mit Feineinstellung -Sägeblatt schwenkbar 90C - 45C -Motor 3,0 kW / 400 V -Absaugstutzen FI 120 mm -Vorritzaggregat 0,75 kW, D ...

Fireplace kits DOVRE 2000S The Dovre 2000S fireplace insert is made entirely of highly resistant cast iron. This fireplace is adapted for heating with hardwood or wood briquettes. The nominal heating power 2000S is 9 kW, maximum power 11 kW. Dimensions : L. 75 x W. 65 x H. 100 cm Request a quote on iNTER-WiBA Sp.J. WLL Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl ABC.inter-wiba.com.pl

Control cabinet EMS 2000 by Jenbacher J312 from 1997. If you are interested, we also have many spare parts for Jenbacher 312

- Producer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of construction 2007 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Max. part height 70 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp max. 120 W/cm - Electic capacity lamp infinitely variable - Length cross bar conveyor - Cross-bar pitch ~ 115 mm - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 86 A / 36,4 kW - Voltage fluctuation max. +/- 5 %

Press brake, bench brake, folding machine, swivel bending machine, die bending machine -Manufacturer: zts, folding machine type XONM.2000/2A-4 -Drive: hydraulic -Max. Working width: 2000 mm -Max. Sheet thickness: 2 mm - Connected load: 2.2 kW -Dimensions: bench 2850/1100/H1400 mm / aggregate 720/540/H760 mm -Total weight: 2160 kg

Platform trucks, transport trucks, heavy-duty trucks, table trucks, assembly trucks, industrial trailers, container dollies, roll-/cargo trailers -Manufacturer: Bartels, heavy-duty transport wagon industrial trailer type RP -Platform: 2000/1000/H340 mm -Load capacity: about 2000 kg -Tires: solid rubber -Own weight: 70 kg

Grinding diameter: 630 mm Grinding length: 2000 mm Peak height: 320 mm Table speed - without steps: 0.005-5 m / min Longitudinal table movement min./max.: 5/3350 mm Table speed: 8 m / min Grinding headstock-cross movement: 420 mm Workpiece headstock motor: 3,0 kW Grinding headstock-motor power: 22 kW Motor of the internal grinding device: 3 kW Lubricating pump motor: 0,11 kW Machine weight approx.: 15700 kg Space requirement approx.: H1970 / B3100 / L12650 mm

The Envirolyte ELA-2000 has been designed for production of Neutral Anolyte and Catholyte. Some automation and easy operating procedures give the added benefits to rapid elivery of safe and fast acting disinfectan - Neutral Anolyte. The strenght of Neutral Anolyte in terms of active chlorine concentration can be adjusted by current setting in de plc and valves.

Vegetable and fruit puree line, with a production of 2000kg/day (6h). Composed of: Slicer URBASA brand model Q908.010 built in stainless steel AISI 304, with stainless steel blades. 1,5kW MARRODAN model PR32318 B/T elevator with scalder feed. With PVC/Polyurethane belt 3C 500 with cleats. total length: 3000mm useful width: 500mm power: 0,37kW MARRODAN linear mesh scalder model PR32217, for vegetable products. The regulation of the scalding/hydration system is made by a temperature controller connected to a PT100 probe. The feed speed is regulated by a frequency inverter. Basic construction in Stainless Steel AISI 304 Polypropylene mesh type A-1061mm Total installed power: 4,7kW Group of 2 pulpers/pulpers and 250 lts heated tanks for mixing and cooking. INOXPA centrifugal pump model HYGINOX SE made entirely of stainless steel, driving the product to the exchanger ...

Machine weight: 10000 kg Total machine input:: 11 kW Max. metal sheet thickness: 8/12 mm Min. inner diameter of the circular oven: 330 mm Upper cylinder diameter: 300 mm Bottom cylinder diameter: 300 mm Circle speed: 8000 mm/min

Description: Scissor lift table with - Contact strip - Emergency stop switch - Remote control Table length 1300 mm Table width 800 mm Lifting height 1010 mm Load capacity in kg 2000 kg Height min. 190 mm Connection voltage 400 V Total power requirement 0.75 kW Lifting speed - upward empty 40 sec. Lifting speed - downwards empty 30 sec. Machine weight approx. 0.28 t Dimensions approx 1,3 x 0,8 x 0,4 m Approx. Onsite Dimension. (l x w x h): 1,300 x 800 x 400 mm, weight approx.: 280 kg

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

Cat. No. 06-1101-8 new with lid-round standing on feet from V2A – 2,000 litres top quality for the favorable price, the best high-grade steel to German Institute for Standardization welds minimally, stable feet standard equipment: material V2A, 1.4301 according to. German Institute for Standardization 17440, inside 3IIId=2B – outside marbles completely pickled, passiviert and neutralises rest outlet DN 50 level indicator with strip and scale swimming lid completely with accessories air-bleed valve and bleed valve air pump transport hooks for lid on / from state feet volume: 2,000 litres Diameter: 1,310 mm Cyl. Height: 1,500 mm Total Height: 2,165 mm feet: 3 surcharges upon request For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, exc ...

Cat.-Nr. 11-3325 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-2525 in a very good condition Total height: 2550 mm Diameter: 1800 mm Outlet diameter: 80 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...