We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,139 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Rotary vane vacuum pump manufacturer: Pfeiffer Type: BA251 Status: Generalueberholt Gewaehrl: 12 months Zubehoer: User manual equipment: mineral oil or by arrangement suction power: 250 m3/h end pressure with gasb.: approx.: <5x10e-1 hPa (mbar) delivery time: approx. 1-3 weeks and more Delivery: ex works; ready for use
used
used
new
NEW column boring machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via central knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting power (depending on the slope): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Extension (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack - Spindle speeds infinitely variable (1/min): 20 - 2000 - Dimensions (mm): 430 x 715 x 1800 3-year warranty for single-shift operation Further TECHNICAL DATA can be found in the product sheet! DELIVERY: free house incl. packaging NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR AN OFFER! FLOTT STUE ...
used
Qty 1 x Carter MK3+ Banbury internal mixer, chamber volume 90L, batch weight approx 85kg, 2 wing tangential rotors, drilled sides, roller bearings, hydraulic drop door with linear actuator and spade latch. F type dust seals. With 325kw, 1070rpm, 715A, DC variable speed motor and controls. Pneumatic hopper. Complete with hydraulic unit, lubrication unit etc and in good condition (previously used for mixing coloured compounds).
used
TECHNICAL DATA: for Aluminum Cutting width max mm: 4000 Tilting: 45° Saw blade diameter mm: 500 Machine control: CNC EC 4000
used
Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Pfeiffer Type: BA251 Status: Rebuilt Warranty: 12 months Accessories: owner's manual Resources: Mineral oil or by appointment Suction power: 250 m ³/h Enddruckmit GASB.: approx. < 5x10e-1 hPa (mbar) Delivery time: approx. 1-3 weeks u.ue.V. Delivery: Ex works; ready for operation
new
Built in 2019 immediately available Special price limited in time! No return of the used battery required! Price is valid without returning the used battery! Manufacturer Hawker (formerly VHB and Varta) Country of manufacture: Germany Place of production: Hagen Voltage 80 volts Ampere hours 930AH Connection cable Rema 320A Description: Forklift battery, traction battery for forklift 80 volts 930 ampere e.g. Still R60-40, Still R60-45 and others like Linde, Clark, Jungheinrich, Kalmar, Dosan, Omespo, BT, Wagner and many more Type N 80V 6PZS930 Trough mass LxWxH 1.025mmx996mmx767mm Weight 2.196kg New, unused and OVP, ready to ship! Special price
new
OBRIEN ALUMINIUM - COLD SAWS TYPE BETA PLUS -Zaagblad 300 mm -Verstek Dubbel -Zaagkop kantelbare -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
EinspannmaÃ?e: 1600 mm x b: 2900 mm frame: 1600 mm x b: 2600 mm â?¢ Pression-Druck by 1T, self-locking, 140 mm â?¢ Versatility - many applications (frame, body, surface gluing) â?¢ Workload - ergonomic posture â?¢ Save time with user-friendly operation â?¢ Frame are bolted and therefore can be disassembled â?¢ Pressing units galvanized G & FE-RPW-3000PL
used
Machining center vertical S - plus 10 Manufacturer: Hartford BJ: 2016 Control Heidenhain ... TNC 640 Clamping table area ... 1150x520mm Axis X ... 1020mm Axis Y ... 520mm Axis Z ... 550mm Spindle speed ... 12000-_/min. controlled axes... 3 cooling ... 20bar ISO 40 Magazine places... 24 chip Conveyor Workpiece probe The machine is in good condition, possible to test under power.
used
Rewinder MAYA BXA 434 Plus Built in 2014
used
Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg
used
Manufacturer: Neolt Model: Electro Power Trim PLUS 250 Year: 2003 Furnishing: - electric rotary cutter with rotating circular knife - Cutting thickness up to 1.6 mm - Triggering of the cutting process by hand contact strip or foot pedal - Transparent pressure rail with which the material to be cut is placed during the cutting process is automatically pressed: - Illuminated cutting edge - Collection bag for clippings Ideal for cutting paper, pop-up and other displays, laminated Printing, banners, tarpaulins and self-adhesive foils. The device works flawless and was unfortunately used very little. Availability: In stock Defects: none Location: germany Price: on request
used
Used electric punching and binding system for plastic binding. For the fast and practical creation of brochures and documents in small to large runs. Binds up to 480 sheets Diameter adjustment guarantees easy opening and closing of the binding element, for perfect presentations Rotary knob to adjust the edge spacing Specially hardened punches for sustainable use Offset punching punches for a better punching result Highest format flexibility thanks to QSA technology, e.B. between DIN A4 and A5 Adjustable side stop for ideal punch adjustment Easy-to-empty waste drawer Built-in dimension scale for document or binding element size Robust construction and compact design
new
TO WHOM IT MAY CONCERN; WE VE 1 PCS NEW & UNUSED WOODWARD 723 PLUS DIGITAL SPEED CONTROL AT OUR STOCK. WE VE ALSO 9 PCS USED 723 PLUS AT OUR STOCK . WE DISMANTLED THOSE CARDS FROM RUNNING SYSTEM. PLS FIND DETAIL NEW PART NO 8280 -488 REV D CTRL ASSY 9906-619. REV G USED PART NO 8280 - 5010 PAAE034117 REVISION NEW 2PCS ( WARTSILA W9L 20 ) PART NO 9906 - 619 REVISION NEW 6PCS PART NO 8280 - 336 1PCS ALL PANELS LOCATED IZMIR TURKEY . READY TO SHIPMENT. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
used
Manually adjustable profile iron bending machine make MD Durst type UP 25 plusTechnical specifications:Bending roller carrier shaft speed: 10 rpm.driven bending roller carrier shafts: 2 pcs.adjustable bending roller support shafts: 1 pc.Bending roller trunnion dimensions: 25 x 70 mmStandard bending roller diameter: 84 mmAngle steel: 25 x 25 x 3.0 mmT-steel: 25 x 25 x 3.5 mmU-iron: 30 x 15 x 4.0 mmFlat Bar: 304.0mmFlat bar upright: 50 x 8.0 mmSquare bar: 16 x 16 mmTubes:1/2 / 1/8Drive power: 1.1 kWWeight approx.: 350 kgExternal dimensions approx.: 635 x 300 mmWith- 1 complete set of bending rollers- 1 set of flat bar bending rollersused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for ...
used
Key data: 350 , 50 , 30
Manufacturer: Battenfeld Type: Plus 350/75 Built: 2004 Control: Unilog B2 Closing force: 350 kN Closing type: Hydraulic Tie bar ratio: 270 mm Plate size: 470 mm x 285 mm Tool installation height: min. 150 mm max 250 mm Opening distance: 200 mm Plate spacing max.: 450 mm Screw: 22 mm Lifting volume: 38 cc Spray weight PS: 34.5 gram HP Spray pressure: 1627 bar General Engine: 7.5 kW Heating: 2.7 kW Dimensions: 2.3 m x 0.9 m x 1.3 m Weight: 1100 kg Screen text: German / English Additional equipment Robot interface
new
Single-chamber vacuum packaging machine - model PlusVac 21 Main characteristics: – Completely stainless; – Automatic lid opening; – Floor model; – Equipped with a highly efficient Bush vacuum pump with a capacity of 21m³/h; – External dimensions: W 480 x L 655 x H 975 mm. (1550mm. with open lid); – El. connection: 1.1kW, 3Ph, 400V, 50Hz; – Weight 65 kg; – Camera size: W 430 x L 505 x H 175 mm; – Maximum dimensions of a bag: 400 x 500 mm; – Sealing length: 1 x 405 mm. in front; – Double sealing seam; – Control Comfort; Options /not included in the price/: – Gas injection; – Additional sealing at the back; – Sealing with cutting; – Additional sealing at the back, with gas – Vacuum pump 40m³/h – Vacuum pump 60m³/h. 1 year warranty Categories: Packaging in envelopes , Packaging technolog ...
used
used
used
Manual continuous scale Rhewa; good condition; cleaned and tested; Max. Load capacity 150kg, min.1kg; Division 50g; with forward roller conveyor 1.90m; Width 510mm. Flow scale Rhewa; good condition; cleaned and checked; max.weight 150kg, min1kg; division 50g; with infeed roll conveyor 1.90m; width 510mm.
used
cutting diameter: 220 mm band length: 425 mm cutting lenght max.: 2500 mm total power requirement: 0,95 kW weight of the machine ca.: 219 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 48x3,5 mm : 48x2,5 mm : 32 mm : 64x2 mm bending speed: 2 U/min : R10-R300 total power requirement: 1,5 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 60x3 mm : 60x2,5 mm : 35 mm : 64x4 mm : R10-R300 bending speed: 2 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num: 5422 Type: ML3015eX PLUS Producer: Mitsubishi Generated: 2017 Parameters: Control system: MITSUBISHI M 700 Engine hours: 21480 h Spindle hours: 1480 h Laser power: 4.5 kW Maximum table load (even): 930 kg Feed length X-axis: 3100 mm Feed length Y-axis: 1565 mm Feed length Z-axis: 150 mm Machine length: 10210 mm Machine width: 3130 mm Machine Weight: 10700 kg
new
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 140 mm cutting capacity - round: 240 bei 45° mm work height max.: 945 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 200 bei 45° mm total power requirement: 3,0 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2650 x 2040 x 2050 mm Very robust machine framework composes of castings from grey cast iron andensures vibration absorption. In order to achieve maximum stiffness of the whole system and cutting accuracy, the band saw arm is attached to a sturdy turntable on both sides in massive housing fitted with pre-stressing tapered roller bearings. Modern concept of the band saw arm allows for large cutting ranges in both upright and angular cutting. Massive arm turning syst ...
new
cutting diameter: 260 mm saw band length: 2880 x 27 x 0,9 mm cutting width: 300 mm band speed: 35 / 70 m/min : 260 mm : 185 mm : 300 x 185 mm : 240 mm : 185 mm : 185 x 110 mm capacity 60 degrees: round: mm capacity 60 degrees: flat: 105 mm capacity 60 degrees: square: 105 mm work height max.: 900 mm total power requirement: 1/1,4 kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1840 x 1680 x 1990 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 260 mm saw band length: 2880 x 27 x 0,9 mm cutting width: 300 mm band speed: 35/70 m/min : 300 x 200 mm cutting capacity - round: 260 bei 90° mm : 190 x 100 mm cutting capacity - round: 175 bei 45° mm work height max.: 910 mm total power requirement: 1/1,4 kW weight of the machine ca.: 475 kg dimensions of the machine ca.: 1860 x 1680 x 1980 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 220 t chamfer lenght: 3150 mm distance between columns: 2600 mm Control: CYBELEC VisiTouch 19 2D dayligth: 525 mm stroke: 275 mm feed down: 150 mm/sec feed bending: 0-10 mm/sec feed up: 120 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 15.600 kg dimensions of the machine ca.: 4250x2000x3150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bread slicer Schickart TS / 30 plus stainless steel? Product? Manufacturer: Schickart? Type: TS / 30 plus? Condition: used, functional, baker's condition? Material: stainless steel? On wheels, drivable? Power supply: 400 volts / 0.75 kWDedetails see pictures
used
ATLAS COPCO 2908850800 ORIGINAL ROTO-H/PLUS 2 barrels of 209L each. approx. 10 years old
new
ATLAS COPCO 2908850800 ORIGINAL ROTO-H/PLUS 2 canisters á 20 L. approx. 10 years old
used
used
used
used
used
Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...
used
Heidelberger Druckmaschine GTO52-2-P with twist - Plus version - Perfector - Twist - Year of construction: 1991 - Print number: 34.5 million print - 2 - Colours - Printing unit - Format: 36 x 52 cm - Dampening plant: Varn -Kompac III - Direct film dampening unit - Electrical - double arc turreting - Powder device - with 420 mm clamping rails - available from 02/2022
new
Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation
used
Cutting angle from/to: 90° - 40° Opening width vice: 260 mm Belt speed: 2-stage Band saw blade: 400 x 32 mm Motor power: 0.48 / 0.65 kW Dimensions: 1200 x 420 x 800 mm Weight approx.: 130 kg Equipment: Coolant device without pump
new
Electric elbow making machine EEM-200 plus Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipe from all four sides while bending and provides better quality of elbow. Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. You can use our machine for working with round pipes as with rectangular pipes. There are four types of Elbow making machines we produce: 1. Elbow making machine EEM-150 for the pipes from 80mm to 150mm diameter. 2. Elbow making machine EEM-200 for the pipes from 80mm to 200mm diameter. 3. Elbow making machine EEM-250 for the pipes from 80mm to 250mm diameter. 4. Elbow making machine EEM-200plus for pipes 80-200mm. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. ...
new
Standard equipment - Thread cutting device - Control panel with OLED display - robust, high-quality drill head hood - LED lighting - quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with CEE plug - mechanical feed of the Z-axis - incl. electromagnetic coupling for 3 feed speeds - Drill cross with push button - in thread cutting mode: right-left SPECIFICATIONS Continuous/normal drilling performance (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Projection: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display digit ...
used
Offset GTO 46 Plus , good condition
used
Dressing machine Mono Omega 580 Plus - Mono dressing machine - Model: Omega 580 Plus - with 3 moulding nozzles - Year of construction 2010 - 2.5 kW - 13 A
new
Cold water high-pressure cleaner and hydraulic oil demand unit. Working pressure: Infinitely variable up to 320 bar. Required quantity: up to 21l /min (1,260 l/h) Pump: 3-plunger, all-ceramic Engine: 2 cylinders 4 stroke petrol engine Motor power: 16.4 kW Speed motor/pump: 3,250/1,450 rpm Pump drive: Gearbox Fuel consumption:approx. 5.5l/h Volume fuel tank: 20l Pressure outlet (water) M221,5 AG Heating capacity Olbrenner Empty Weight: 110kg Dimensions(LWH) 757999cm Article no.: 1 486 089
used
Motorized hacksaw make KLÄGER type Plus 400Machine -No: 95301 built in 1971Technical specifications:Saw blade size: 400 x 32 x 1.5 mmCutting range around 90 °: 190 mm: flat 90 °: 190 x 190 mm: around 45 °: 140 mm: flat 45 °: 190 x 140 mmStroke length :: 120 - 195 mmNumber of strokes per minute: 52/105Drive power: 380 V / 50 HzWeight approx .: 132 kgExternal dimensions approx .: 1100 x 400 x 700 mmWith- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
GE mobile X-ray machine VMX • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany and can be picked up immediately. • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!
used
FU AllenBradley expanded from functioning plant