tin plate used for sale

Casting and finishing plate made of cast iron FISCHER, AschaffenburgYear of construction 1979Dates:Plate size: 1500 x 750 mmPlate thickness solid: 50 mmTotal thickness (ribbed): 200 mmWith- Feet- Direct horizontal parting device SCHMID-KORTAxa0xa0xa0 Type A 7/2 A Fabr.-No. 11/79used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Clamping plate with several clamping holesSize 2750 x 1400 mmHeight 400 mmwith several clamping holes Drm. 40 and 50 mmused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Directional plate made of cast ironDimensions: 1250 x 1000 x 210/55 mmWith- 4 adjustable feetused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot worktable made of cast iron (formerly press table)Length: 1520 mmWidth: 850 mmHeight: 980 mmWith- 6 T-slotsxa0xa0 Transverse Lg. 850 mmxa0xa0 Groove size 38/22 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot clamping plate made of cast ironDimensions:Length: 1600 mmWidth: 1200 mmHeight: 200 mmWeight approx: 1400kgWith- 7 transverse T-slots 26/48xa0xa0 Distance 100/200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Directional plate made of cast ironLength: 3000 mmWidth: 2000 mmHeight: 120/45 mmused, in goodConditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot mounting plateTechnical specifications:Length: 4000 mmWidth: 2500 mmHeight: 300 mmWeight approx: 8.0 tWith- 14 x T-slot in the longitudinal directionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rectangular T-groove clamping plate made of cast iron (hollow body)Technical specifications:Outside dimensions approx: 700 x 1050 x 350 mmNumber of T-slots horizontal: 6Size of the T-slots: 20/34 mmWall thickness: 60 mmVertical elevation each: 3 clamping slotsDistance of T-slots: 150 mmWith- 2 suspension lugsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cast T-slot platenTechnical specifications:Dimensions approx. L x W x H: 2010 x 1080 x 220 mmThickness: 35 mmRibbing: 185 mmNumber of T-slots: 3Dimensions of the T-slots: 60/36 mmGroove distance: 275 mmNumber of mounting holes: 8Size of the mounting holes: 155 mmWeight approx: 1140 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot mounting bracket made of cast ironTechnical specifications:Clamping area: 700 x 550 mmFootprint: 500 x 550 mmMaterial thickness: 60 mmWith- 6 horiz. T-slotslittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot clamping plate, ribbedTechnical specifications:Length: 3000 mmWidth: 1000 mmHeight: 190 mm:T-slots lengthways: 4 piecesWeight approx: 2 tWith- ribbed- Ring eyelets for transportused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Measuring plate with T-slot for screwing on a measuring columnon baseTechnical specifications:Length: 770 mmWidth: 760 mmPlate height: 40 mmPlate height with ribs: 200 mmon baseWith- 1 T-slot:usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Granite measuring plateTechnical specifications:Dimensions approx: 500 x 500 x 60 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Curved rotary indexing table make EXPERT type E 19/0030/4Masch. -No: 4806 with 4 stations, advantage: The 4 stations will beapproached precisely and softly. The schedule can not be changedbecome. You can run the table all around, but it stopsalways briefly at the 4 stations,Turntable diameter: 1350 mmTable height: 820 mmInner bore: 90 mmMax. Load: 1 tOuter diameter: 1500 mmWith- ball bearing slewing ring- Index drive- without motorvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot clamping plate, ribbedTechnical specifications:Dimensions L x W x H approx.: 3000 x 1435 x 200 mmWeight approx.: 2500 kg:with- 4 adjustable feet- 4 T-slots- mounting holesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Stationary P 3 multi-center for emulsion processingand VE water production make HENKEL Bj. 1987- Immobiler MC + VE - Plant- Mobile MC- Suction truck for old emulsion, pure emulsion(inserted 3 cars 500, 800, 800 l)- Storage tank for P 3 Mutansecond handPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC stop make de man type AST-1/0 / MSR 3Year 1995Support length: 3000 mmPad width: 200 mmWorking height: 800 - 1000 mmFeed rate: 22 m / minDrive power: 120 WWith- PC control MSR 3 with max. 1000 sentencesvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Semi-automatic screen printing machine manufactured by Borghoff & WILK type Mini Printer Mod II, year 1988Max. Print format: 400 x 600 mmMax. Die cast thickness: 20 mmPrinting plate dimension: 550 x 700 mmVacuum area: 430 x 630 mmMax. Frame dimensions: 640 x 820 mmminute Internal frame dimension: 400 x 200 mmmax.clock: 12000 p / hDrive power: 0.75 hpVacuum motor: 0.75 hpPower connection: 380 V 50 HzExternal dimensions: 1040 x 1260 x 1330 mmWeight: 300 kgWith- Drying cart- Cast vacuum base plate with fine adjustment- aut. Sincroprint device for printing speed- adjustable squeegee angle- single and continuous cycleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

Water treatment plant make WALTHER-TROWAL type RT 10 SFabr. -No: FG02 / PP06 / DSFL84770 Year 1992The flocculation removes the solids in the wastewater and most pollutants (metals, oils and fats) from the water. In this way, the purified water - according to the legal requirements - easily fed into the sewer.The price was not fixed at the time of the offer.Please call our Mr. Waldeck on 0049 (0) 171 8510154Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Engine with flexible shaft make SUHNER type Rotofero DKM4Mash. -No: 2409677 speeds: 850 - 12000 rpm.Drive power: 0.73 kWPower connection: 380 V / 50 HzWith- fixed base- flexible shaft 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pre-assembly device make VOSS type P 70Best. -No: 991070 Machine -No: 170 Year Nov. 1989for pre-assembly of cutting rings on pipes from AD 6 - 42 mmand for mechanical pre-assembly of the flared cone and collar ringsPipe size to be machined: 6 - 42 mmMax. Pressure capacity up to: 250 barDrive power: 0.3 kWPower connection: 220 V, 50 HzDimensions L x W x H: 500 x 550 x 210 mmWeight approx: 65 kgWith- Underframe- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Old sewing machine make KAYSERMachine -No: 1167996for the price of: EUR 250,--Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Furnace pipe pulling machine make SCHNEIDERYear of construction 1994Working range: 60 - 220 mmWorking stroke: 120 mmElectricity requirement: 0.75 kWDisplacement of the tube counterholder: 750 mmPower connection: 380 V / 50 HzOutside dimensions approx: 2000 x 750 x 1570 mmWith- 14 pulling tools: 60; 70; 80; 90; 95; 100; 120xa0xa0 130; 140; 150; 170; 180; 200; 220 mm- Manual operation- Automatic mode- Two-hand releaseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand-held mot. Sweeper make HAKO type HAMSTER 800 VMachine -No: 6210018123 Year 1990Sweeping width: 800 mmWeight approx.: 180 kgOutside dimensions approx. 1200 x 1700 x 1200 mmWith- Travel drive- 4 stroke Kawasaki engine- side brushused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric Hand Drill Fabr SIEMENSMachine -No: 60442435, built in 1942Connected load: 220VWith- Drill chucknot functionalPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Paint shop Fabr. WAGNERYear of construction 1998consisting of:A) Paint / suction wall with filter system size 5000 x 2000 mmB) electronic 2K mixing and dosing system WAGNER TWIN CONTROLC) gun flushing deviceD) AivCoat spray gunusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Personal time attendance make Z + M type Argus J 30 PlusFabr. -No: 8383Clock: digital (time, date, day of the week)Accuracy: 15 sec./monthPushbutton: Inkjet blackBackup: 3 months in case of power failureWeight approx: 4.5 kgOutside dimensions approx: 160 x 205 x 128 mmWith- Scannerused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic test case make DUNLOP BTR hydraulicExternal dimensions approx: 325 x 280 x 80 mmWith- 4 pressure displays 25, 100, 250 and 400 bar- 4 connections- Hose connectionsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Demagnetizer type 35136-25B1Machine -No: 1-82942 Year 1982Table surface: 250 x 250 mmElectricity: 5.2 AmpFrequency: 50 HzElectricity: 220 VHeight: 140 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal storage box Fabr. SCHÄFEROutside dimensions approx: 810 x 680/500 x 620 mmWith- Intervention recess- Color greenusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motor with 2 flexible shafts make BIAX type MBPMash. -No: 8/1113/39Engine speed: 900/2200 /: 4600/9000 rpm.Drive power: 0.55 kWWith- 2 flexible waves- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

coordinate tableTable size: 625 x 315 mmTable longitudinal path: 450 mmCross table travel: 350 mmTable height: 180 mmOutside dimensions approx: 930 x 800 x 180 mmWith- Delivery spindlesNominal power for X + Y- T-slots- very accurate executionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Torque wrench make STAHWILLE type manoscope 721 NF / 80Fabr -No: 202318024Scale range: 160 - 800 NmScale range: 120 - 600 ft. LbScale division: 20 NmScale: 20 ft. LbSocket Square: 3/4 B 46.5 mmB 76 mmTotal length: 1040 mmWith- triggering- comfortable setting- double stop signal- Double scale Nm / ft. lb- Left suit by removable square- Protection of all sensitive parts by the robust steel tube in aluminum U profilevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Directional plate made of cast ironDimensions: 1500 x 1000 x 210/40 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

tiltable electromagnet clamping plateClamping area: 900 x 200 mmHeight: 65/105 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Directional plate made of cast ironDimensions 4000 x 1200 x 300/40 mmWithout feedusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot platen made of cast ironTechnical specifications:Length: 1200 mmWidth: 1000 mmSolid thickness: 60 mmRibbed thickness: 150 mmWith- 6 longitudinal T-slots 26/16 mm- baseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cast iron plateTechnical specifications:Length: 1200 mmWidth: 800 mmSolid plate thickness: 50 mmRibbed panel thickness: 150 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Older four-roll round bending machine make unknownTechnical specifications:Working length: 1000 mmRoll diameter: 100 mmmax.sheet thickness: 3-4 mmExternal dimensions L x W x H: 2550 x 1250 x 1250 mmWith:- Swiveling top rollerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Four-roller bending machine make FACCIN type 4 HCI/V2100X6/4Ser-No: 87100480-0526Technical specifications:max. bending length: 2100 mmBending sheet thickness: 6.0 mmRoller diameter: 185mmDrive power: 5.5 kWWeight approx.: 6000 kgDimensions approx.: 1500 x 1500 x 4000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Bending Machine Fabr. FASTI Type 104-20-1Machine -No: 9314008 Year 1993Effective length: 2040 mmSheet thickness: 1.0 mmRoll diameter: 80 mmMotor power: 1,1 kWWeight approx: 660 kgWith- CNC Control- 4 different cambered rollersxa0xa0 for extremely precise tube productionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

3-roll bending machine make SCHÄFER type SRMVS 1500/13Masch. -No: 3522 1500/15 / 8,5 / 7 built in 1971Bending length: 1540 mmMax. Sheet thickness: 13 mmBending capacity ST / VA: 8.5 / 7.0 mmRoll diameter: 200 mmExternal dimensions approx. 4000 x 1300 x 1900 mmWeight approx. 5,0 tWith- 3 rollers driven- all 3 rollers mot. adjustable- Mot. obliquely adjustable bottom rollers- suitable for conical bending- Folding bearing mounting by hand- sep. mobile control panelused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Heavy, older motorized three-roll bending machine Fab. UNKNOWNTechnical specifications:Working length: 1500 mmMax. Bending strength: 5.0 mmRoller diameter: 145/130/165 mmlower roller with grooves spaced: 50 mm apartDrive power: 5.0 kWWeight approx: 1.0 tExternal dimensions approx .: 2600 x 1250 x 1400 mmWith- swiveling top roller- Emergency stop switch- R + L run- Conical roundsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Three-roll bending machine make MG type MG 108 AMachine -No: 01226 built in 2002Technical specifications:max. bending length: 1050 mmSheet thickness max.: 12 mmSheet thickness max.: 8 mm for NiRoTop roller diameter: 140 mmBottom roll diameter: 140 mmMin drm. 230mm at :5mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- Capacity : 2 x 4000 l/h - Inlet temperature : + 40°C - Outlet temperature: + 20°C - Cooling liquid temperature: approx. 7°C - 2 plate compartments for cooling 2 products simultaneously and individually - With control for 2 independent circuits

Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.

Max size 260 x 380 mm Details with hot foil attachment with foil pull and heating element Available direct

From original template directly onto plate. fully automatic! The original is exposed via lens system onto a printing-plate roll. Plate is automatically cut and developed - ready for direct use on Rotaprint.

Plate max width 650 mm Plate min length 460 mm Weight 150 kg Current 220V 7.5 Amp, 1.5 kW Working Dims W107 x D180 x H106cm Packaging Dims W107 x D100 x H106cm

cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)