tilt used for sale

Manufacturer: Knauer Year of construction: 2017 Tilting device: Hywema KV 12 Location: Kaiserslautern External dimensions: approx. 2668 x 2140 x 4752 mm Width feeder: 2.25 m Width: Output: 1.95 m Nominal voltage tilting device: 400 V Rated power tilting device: 2.2 kW Motor/pumping hydraulic system: 5.8 l/min; 160 bar; 1.5 kW; 1445 rpm Payload travel trolley: 4000 kg Payload tilting device: 1250 kg Payload vibrating channel: 250 kg/m² Weight of carriage: 2550 kg Weight tilting device: 1450 kg Weight vibrating channel: 1650 kg Mounting: Attachment to the hall floor The conveyor system served as a feed to a continuous washing system in an automotive plant. We will be happy to send you further information and pictures on request!

Technical data: -Capacity approx. 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, type 6 PTF, BJ. 97 - space requirement approx. B H 1100 x 1300 X 1600 mm -Weight approx. 300 kg

SCM si x 32A Circular sawing machines Both sides saw blade tilting to 46° Be Mule shoe 1200 x 650 mm Saw table cast 1000 x 685 mm Carriage 3200 x 360 mm Format sections 3200 mm RIP fence cutting width 1270 mm Max cutting height + 90 °: 136 mm Max cutting height + 46 ° /-46 °: 97/60 mm Before scoring unit Motor 400V 50 Hz 7kW Main sawblade speed: 4000 1/m Dust nozzle diameter: 120 mm and 80 mm And switch on the carriage 2-ashes controlled height/Pan Programmable, electronic display G & PIECES 5508780 Optional carriage 2600 mm G & PIECES 5508775

Cargo Tricycle Electric Tipper New vehicle available from stock Description E-Mobile, TUC TUC, Electric Tipper Load Carrier Convertible 1000W/60V , Battery 45Ah with small license plate to drive moped driver's license Loading dimensions L X W X H 120 x 100x x34 + 14 CM RAILING 2 front bench seat Bench with storage compartment Color red 2 speed gearbox for steep mountains Empty weight 265 kg Ab. Total 630 kg ECE Europe-wide expert opinion Stable brakes front discs and rear brake drum Handbrake Lockable seat compartment Tilting tailgate Turn signals and high beam Brake light Reverse beeper Reverse gear Leaf springs on the rear axle for maximum load EU approval, small moped license plate is enough Wheelbase 1915 mm Very good traction even on loose or muddy ground because the weight of the batteries is directly on the drive axle. It lies very well in the curve and  ...

Miter and miter circular saw Fabr. ELU type TGS 172Machine -No: 2201 Year 1983Saw blade diameter: 250 mmSaw blade speed: 2600 rpm.Cutting area 90 °: 0 x 70 mm45 °: 0 x 38 mmPower connection: 220 V / 50 HzElectricity requirement: 1.1 kWDimensions: 700 x 650 x 850 mmWeight approx. 48 kgWith- Version rotatable as a cross-cut and table saw- tiltable and rotatable- Length stop 3.0 m- feet for machine and stop- Table longitudinal stop- Suction hoseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

Tool milling machine make MAHO type MH 700Machine -No: 71139Technical specifications:Working area X 500 mm Y 465 mm Z 400 mmSpindle mount ISA 4018 spindle speeds 32 - 1600 rpm.Quill stroke 100 mmCross feed aut.:10 - 500 mm / min.Longitudinal feed 10 - 500 mm / min.Vertical feed 5 - 250 mm / min.Rapid traverse : 1.4 / 1.4 / 0.7 mUniversal table / clamping surface 820 x 480 mmTable lateral adjustment 200 mmTable can be swiveled by + - 30 °Can be tilted by + - 30 °Table rotatable around 360 °Drive power 3.0 kWFeed motor 1.1 kWWeight approx 2020 kgExternal dimensions approx . 1800 x 1500 x 1800 mmWith- Point-to-point control Heidenhain TNC 121- Universal milling table- automatic tool clamping- various tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors ex ...

Type 700 Motor power 4 kW, 1450 aps/min Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Feeder to store tilted Mondini -Year: 2014

CNC universal tool milling machine make cover type FP 4 NCMasch. -No: 2810-3223 built in 1984 with CNC control dialogueWorkspaceTravel x (longitudinal): 560 mmTravel y (transverse): 500 mmTravel distance z (vertical) 410 mmTable size (universal table rotatable, tiltable, tiltable): 430 x 710 mmSpindle speeds vertical: 6300 rpmSpindle speeds horizontal: 31.5 to 3150 rpmSpindle mount: SK 40Quill stroke: 80 mmfeed driveFeed rate programmable: 2- 3600 mm / minRapid traverse for X, Y axis: 6000 mm / minRapid traverse for Z axis: 6000 mm / minsmallest single step (electronic hand wheel): 0.01 mmDrive power: 2/4 kWWeight: 2.3 toWith- CNC Control Dialog 2- rigid tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and  ...

Type 800 Motor power 4.5 kW, 1450 rpm Blade length 5611 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 800 mm Max cutting height 470 mm Table dimentions 840 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Type MB506C Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

CNC universal tool milling machine make cover type FP 4 NCMachine -No: 2810-3540 built in 1985 with CNC control Dialog 4WorkspaceTravel x (longitudinal): 560 mmTravel y (transverse): 500 mmTravel distance z (vertical) 410 mmTable size (universal table rotatable, tiltable, tiltable): 430 x 710 mmSpindle speeds vertical: 6300 rpmSpindle speeds horizontal: 31.5 to 3150 rpmSpindle mount: SK 40Quill stroke: 80 mmfeed driveFeed rate programmable: 2- 3600 mm / minRapid traverse for X, Y axis: 6000 mm / minRapid traverse for Z axis: 6000 mm / minsmallest single step (electronic hand wheel): 0.01 mmDrive power: 2/4 kWWeight: 2.3 toWith- 20-fold tool changer- electronic handwheel- automatic tool clampingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be  ...

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Type MB505C Working width 500 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Universal milling machine Make GRUPP Type UF 2 Type LVQEYear of construction 1971Table size: 1000 x 275 mmTable longitudinal path X: 900 mmCross table Y: 220 mmTable vertical Z: 450 mmThe table can be tilted to either side: 45 °Spindle diameter: 70 mmSpindle mount: MK 412 spindle speeds: 45 - 2000 rpm.24 longitudinal and transverse u. Vert. Feed rates: 8 - 350 mm / minDrive power: 4 kWFeed motor: 1.3 / 1.6 kWtotal power consumption: 5.7 kWDimensions L x W x H approx: 2200 x 1600 x 1950 mmWeight approx: 1630 kgWith- Vertical milling head VKUP (universal swiveling)- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Type MB504C Working width 400 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Engraving milling machine make DECKEL type G 1 LMachine -No: 76301Technical specifications:Work table: 500 x 200 mmgr. distance table to spindle: 300 mmCross movement of the table: 160 mmLongitudinal movement of the table: 300 mmTemplate table: 550 x 324 mmRotatable by: 360 °gr. Distance from pantograph arm to table: 20 mmlarge bore of the collet: 6.0 mmAdjustability of the spindle vertically fine / coarse: 1/3 mmSpindle speeds: 1900 - 15000 rpm.small / large Transmission ratio: 1 / 50Drive power: 0.2 kWDimensions: 1235 x 1075 x 1240 mmWeight approx: 250 kgWith- tiltable round tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools ...

EDGE SANDING machine for PANEL and PROFILES type FMB 2 I composition : 1° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 2° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 Blowers for belt cleaning Carpet speed variator from 5 to 25 mt / min Upper adjustable presser with rubber wheels Lateral support for wide panels volt. 380/50

Rotatable and tiltable dividing head make VEB Mikromat Dresden type MKT 300 SYear of construction 1976Technical specifications:Table surface diameter: 300 mm8 T-slots radial: 10 mmRotation angle range: 360 °Reading possibility: 1 ° / 5 Swivel angle range: 90 degreespermissible load: 30kPHeight of the table when it is horizontalstanding table top: 250 mmExternal dimensions approx: 540 x 550 mmHeight: 240 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CIRULAR SAW type SCM SI 400 EP NEW machine . prompt delivery CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - manual, semiautomatic and automatic mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide extension floor out with scoring unit : YES max diameter saw blade 400 mm length of the squaring carriage mm 3200 main blade motor power Hp 9.5 scoring unit motor power Hp 1,7 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50 YEAR 2022

Lifting, filing and sawing machine make VEB Ruhla type SgHFe 230 / IIIMachine -No: 548Technical specifications:Working range stroke length: 0 - 125 mmInfinitely variable number of strokes: 75 - 355 DH / minTable area: 400 x 400 mmProjection to the middle of the table: 230 mmSwivel angle of the table on 4 sides: 15 °max.thickness of the material to be processed: 100 mmmax.workpiece weight: 50 kgMotor power: 0.75 kWWeight approx: 350 kgDimensions approx: 680 x 680 x 1700 mmwith- tiltable tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

AUTOMATIC BORING MACHINE Type VITAP 212 n.02 boring heads ( n.21 mandrins each one ) horizontal and / or vertical boring pneumatic tilting lateral reference fences 45° deg. horizontal boring Technical Details : n.21 mandrins ( x2 ) centre distance between mandrins mm. 32 mandrins rotation speed rpm 2800 n.02 motors Hp 2 each one net weight kgs. 600 Volt. 380/50

Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable

Vertical band saw make WESPA type MSP 4Mash. -No: 621092for sawing steel, stainless steels, nickel alloysGray, temper, cast steel and similar materialsRoll diameter: 400 mmCutting height: 280 mmProjection (cutting area): 400 mmBandwidth max. : 25 mmstepless belt speed: 0 - 150 m / min.Saw blade size: 2880/2980 x 25 x 0.9 mmOutside dimensions approx: 900 x 700 x 1800 mmWith- Banded butt welder IDEAL BS 25- Grindstone- tiltable tableused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper

Vertical band saw and band filing machine make JAESPA type AS 4Fabr. -No: 735401, built in 1973Technical specifications:Roll diameter: 420 mmCutting height under guidance: 450 mmCutting width: 400 mmBelt speed: 16 - 1600 m / minSaw band length: 3200 - 3400 mmTable size: 660 x 660 mmTable load: 350 kgSaw motor: 2.2 kWGrinding motorExternal dimensions L x W x H: 660 x 900 x 1920 mmWeight: 690 kgwith- Band saw welding machine BSO-16- grindstone- tiltable table- Attack- lighting- Emergency stop switchused, from a company liquidation,in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Retrofitted in 1998 and revised in 2012 by SIRMU Technical datas: Stroke: 2000 mm Inclination of the platform: 0-60 ° Rotation: 360° Table diameter: 4.500 mm Maximum table load: 50,000 kg Plate diameter: 2.250 mm Movement 4 stages 1 28 mm / min 2 100 mm / min 3 280 mm / min 4 560 mm / min tilting of the table: 0-60 ° 4 stages 2 0.7 ° / min 3 2 ° / min 4 4 ° / min 5 7 ° / min Rotation of the table 4 stages 1 270 mm / min referring to a diameter of 3,500 mm 2 890 mm / min 3 2,700 mm / min 4 5,400 mm / min Total weight: 90,000 kg

Vertical band saw machine make MÖSSNER type Rekord SM/ 400Machine -No: 14464, built in 1965Technical specifications:Table size according to the manufacturer: 600 x 600 mmTable tiltable up to: 15°Projection: 400 mmCutting height: 260 mmRoll Diameter: 400mm6 cutting speeds: 12 - 750 m/minSaw band length: 2780 - 2980 mmDrive power approx.: 1.1 kW 380 VDimensions: 1000 x 750 x 1800mmWeight approx.: 340 kgWith- Band saw welding machine IDEAL type BSO 16 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

HWS 720 K Tilting circular saws Electric motor with direct drive Saw blade diameter: 700 mm Speed: 1400 1/min 400V 50 Hz Working height: 850-1150 mm Rocker pad: 735 mm Dimensions: 1270 x 730 x 1130 mm Weight: 100kg G & PIECES 5965721

Swivel cube table for radial drilling machines Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg

Motorized sheet metal shears make RAS type 83.25Machine -No: 27/10Technical specifications:Cutting length: 2540 mmSheet thickness max.: 3.0 mmNumber of strokes per minute: 50Cutting Angle:1.35°Table width: 430 mmTable height: 750 mmlateral projection: 100 mmRear stop adjustment: 550 mmDrive power: 5.5 kWWeight approx.: 2.5 twith- manual backgauge- manual adjustment of the back gauge from the front with reading scale- foot switch- angle stop- support arms- Tilting roller tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Anko Stir fryer Model: KUP-60 SF60 2012 stainless cooking tumbler, capacity 60L, gas fired, tilting vessel, adjustable speed, temperature and timers, two direction rotation, ideal for rice, noodles, roasting seed and nuts, coating sweets, confectionery and jams etc

Mobile excavator TEREX / Atlas Type TW160 Y.O.M. 2010 approx. 6,300 hrs - Hydraulic adjusting boom - Quick-change system for shovel - Gripper piping - Rear-view camera - Clearing sign (unused) available. - With Rototilt (shovel can be rotated and tilted 360 degrees. Additional grippers e.g. for setting telephone poles or lanterns. (last picture) Video can be submitted on request. The clearing sign was dismantled because the excavator was used as a two-way excavator with a rail handle (without DB approval). Mechanically very little stressed excavators. The enclosed clearing shield must be adjusted to the recording. Visually and technically good condition. Bdxbjqofbb Tires bad (can be renewed on request at an extra cost)

FENSTER-UNIVERSAL-DREH-KIPPTISCH RUCHSER-Universal for wing and frame motions. Rotary tipping table with pneumatic tilting device, work platform with 4 loading holes. Height 900 mm-1050 mm adjustable. Lifting device 400 mm 6 storage boxes Fahing facility Used machine without warranty or warranty. Loveling from the Hamburg location unloaded.

Model construction - milling machine make ZIMMERMANN type FZ 1Year of construction 1987for model and mold making, for wood and light metalTechnical specifications:Longitudinal travel X: 420 mmCross travel Y:4 20 mmVertical travel Z: 400 / 600 mmMachine table (foot): 630 x 490 mmAttachment milling table: 490 x 400 mmRound table movement: 360°Projection: 400 mm8 spindle speeds: 560 - 14000 rpm.Spindle mount: ISA 30Drive power: 1.1 kWPower connection: 380 V / 50 HzWeight approx.: 500 kgExternal dimensions approx.: 1000 x 1000 x 1300 mmwith- rotating top table- several tool holders ISA 30- 3-axis digital readout Mitutoyo- Rolling drawer cabinet- tilting head- 6 milling arbors- Angle milling headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pl ...

Slotting machine Perini CMP 450 Stroke adjustable from 120 to 450mm Throuth 600mm Ramadjustment 500mm Tabledimensions 580x1000mm Tabledisplacements 400x400mm Brakemotor 4.5Kw Strokes 12-60/min Powerfeed Tilting of head Li-Ri 45° Automatic lubrication system Ram newly scraped Incl turntable chuck and some tools

Technical data Cutting surface at the top. 710 x 710 mm Clamping area 710 x 450 mm Swivel / Tiltable 0 - 90° mm Table height approx. 63 mm T-slot dimension (bottom / top) approx. 40 / 21.5 mm Weight approx. 560 kg Dimensions ( L x W x H ) 710 x 710 x 635 mm

2 rolls 1st role: Dimensions (x-y-z) mm: 1300x720x650 2. Role Dimensions (x-y-z) mm: 1500x400x650 Forks tiltable: Yes Max Weight: Kg: 400 Switch box + roller gears Total connection: 2.5 kW

consisting of: 2 x tilting station 1 x ventilator 2 x reservoir Piping

Vehicle data: Make: Komatsu, Type: PC16R-3H, Drive type: Diesel, \Year of construction: 0, Internal no.: 1305, Mast data: Dimensions: Battery & Charger: Description & Special equipment: Attachments: Quick coupler, Bucket, bucket in 400 mm and 600 mm -Ditch clearing bucket hydraulic 1000 mm Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description: We rent a brand new KOMATSU mini excavator type PC16R-3H with tiltable ROPS/FOPS cab and heating, proportional control (via EPC lever) HCU-A and 2 work lights on the cab front (HCU-A/EPC) (NOT in conjunction with Utility KOMTRAX for cabin) Basic machine with hydr. adjustable undercarriage, 2 speeds with auto-shift-down, servo pre-control, swivel boom, 2-way additional hydraulics to boom (switchable to hammer operation), variable displacement pump (210 bar), protective cover on the boom lifting cylinder, work lights on the boom, doz ...

Saw units: 2 Cutting length max mm: 2200 Cutting height mm: 70 Saw blades tiltable: Yes Diameter saw blade mm: 250 Cutting length min mm: 240 Main motor kW: 1.1 Pneumatic tensioner: Yes Saw feed: pneumatic

Stephan UM25 Universal Machine three speeds 720/1430/2880 rpm Mixed insert blunt Stainless steel boiler with double jacket Machine tiltable for removing the processed medium Machine in very good condition Video about test run and other pictures available

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

QTY 1 x TMP (Division of French Oil, USA) Techni-Mix Lab Mixer, Model HD-5,  Year of manufacture: 2014 (New),  CE Marked, Mixing capacity: 5 Litre, 2 wing tangential rotors, Pneumatic hopper, Tilting body discharge (easy for cleaning), 20HP AC variable speed motor, Rotor rpm - Front 47.55rpm, Rear 39.28rpm. Complete with Electrical controls and in excellent condition.

Qty. 1 Second-hand aluminium vertical billet casting plant Mfc.: Wagstaff, Tongrun, Stas Built: 2012 Stopped: 2016 Billet dia.: Line 1: 101.5 – 228.6 mm (4” – 9”) Length: 6300 mm Dia. 101.5 mm – 112 Strands Dia. 127 mm – 76 Strands Dia. 152.4 mm – 112 Strands Dia. 177.8 mm – 72 Strands Dia. 203.2 mm – 62 Strands Dia. 228.6 mm – 50 Strands 1 Qty. 1 Second-hand vertical billet casting line – LINE 1 Molding tables for vertical casting of Aluminium billets of 112 billets with 101.5 mm, 127 mm or 152.4 mm in dia. Other table with 72 billets of 177.8 mm, 203.2 or 228.6 mm in diameter 2 Qty. 2 Melting Furnaces with 60 t capacity/each, and 8 t/h fusion rate, Natural Gas, Regenerative System, Manufaturing by Tongrun in 2011 – China. 3 Qty. 3 Homogenising Furnaces, with 35 t/each for billet, Natural Gas, Cycle 8 t/h average. 4 Qty. 1 Holding  ...

Stage bracket for Kemper HK 150 lift truck -for lifting and tilting Kemper boilers

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

Intended for mixing meat mixtures and spices in order to obtain a homogeneous mixture. All stainless machines. The mixer can also be used to mix a smaller amount than the maximum capacity. The mixture is easily unloaded - by tilting the cauldron forward. Reverse system, mixing in both directions. Clarification: the price of the machine is for a floor model. Machine legs – long or short – are available as an option Power Mn 1100 W Tf 1472W Electrical connection 230-400V/50Hz Dimensions of the vessel mm 410×480 Capacity kg./ l. 50/88 A 750 mm B 465 mm C 1250 mm D 595 mm E 1120 mm F 150 mm G  ...