We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,570 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Technical data: - max. workpiece dimensions 300 x 250 mm- min./max. Distance from the saw belt to the conveyor belt 4 - 125 mm- wide conveyor belt 285 x 5470 mm wheel diameter 711 x 51 mm- min. workpiece length 200 mm- feed speed infinitely 0 - 25 m/min. (standard:15 m/min., optional: - Sawband dimension 4267 x 51 mm- drive motor 15.0 kW- Hydraulic motor 2.2 kW- motor Height adjustment 1.5 KW- voltage 400 V / 50 Hz- Suction nozzle 4 x 100 mm- cooling device- pneumatic Discontinuation roller in the inlet with shock absorber pneumatic pressure roller for precise sawing - the combination of thin saw band and precise sawband guide enables the production of extremely thin lamella thicknesses at min. slat thicknesses of 1.0 - 2.0 mm- smooth, glueable saw cut- saw band cutting joint from 1.2 - 1.6 mm (50% material saving) - Schmitt accuracy +/- 0.5 mm- PLC control with user-friendly touchscreen ...
new
Table dimensions: 800 x 380 mm format table: 2600 x 270 mm be hem length: 2600 mm maximum blade diameter: 315 x 30 mm maximum cutting height 90° / 45°: 100 / 80 mm cutting width on the fence: 1200 mm height: 850 mm table extension: 500 x 310 mm extension table: 800 x 880 mm square table with roller: 830 x 520 mm speed of main saw blade: 4500 RPM scoring sawblade speed: 8500 RPM scoring sawblade: 2-100 x 20 mm suction connection Ø: 100 mm motor power output S1 100%: 3.8 kW (5.1 HP) engine power S6 40%: 5.3 kW (7,2 HP) voltage: 400 V machine dimensions (W x D x H): 2600 x 2800 x 1100 mm weight approx.: 331 kg
Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM
new
Weibert S2 Circular sawing machines Formatschiebetisch: 1150mm Engine power: 3 KW (5.5 HP), 400V,. n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° WJ 700100 Options: WJ-700101 format table 1270 mm WJ-700102 format table 1500 mm WJ-800105 before scoring unit with motor 0, 75kW WJ-400104 suction pipe with hose
used
J.Vuille-Biel -blade circular saw machine: D. 160 mm -vise max. opening 30 mm -with or without feed / stroke max. 640 mm -roll band: 2000 mm -coolant system -machines size: 2400 x 650 x 1340mm -Controlled by air
Chain width 250 mm unit 220 mm cutting height up to 150 mm 15 kw motor
new
Graule ZS 135N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3800 RPM Cutting length 440 mm (at 90 °) Cutting height 135 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 350 mm Dust nozzle 100 mm Weight 100 kg
new
Graule ZS 170N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3500 RPM Cutting length 430 mm (at 90 °) Cutting height 170 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 420 mm Dust nozzle 100 mm Weight 120 kg
used
Producer: INOTEC Type: WT97-RNSV Power: 2,5 kW Weight: approx. 400 kg Length x width x height: 998 x 850 x 1740 mm Sausage cutter INOTEC type WT 97 - RNSV , directly from the customer - Caliber from 17 to 46 mm - Adjustable speed of 0.25 m/s up to 0.8 m/s Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
new
Wood strength KSO 1500 Edge sanding machine with swiveling grinding unit oscillating belt 2260 x 150 mm belt Contact surface 770 x 150 mm Belt speed 16 m / sec. Cast iron table size 680 x 310 mm Engine power: 400 V 50 Hz 1, 5kW 2 suction nozzle with diameter 100 mm Weight 162 kg G & pieces 5368150SET
used
Tool and Cutter Grinder of HELLER SA 315, to the automatic sharpening new dovetail and bevelling of HSS circular saw blade, saw diameter of 350 mm -Grinding wheel Ø 125 and 150 mm -Wheel up to 6 mm -Wheel bore 32 mm -Saw blade diameter 80-350 mm -Blade cutting width up to 5 mm -Blade hole 22-60 mm -Central lubrication -Change gears available
used
Multiple lengths saw FAS 14 with 2 circular saw units per 2.2 kW, 3 x 400 V, 50 Hz. -maximum piece length 6000 mm -maximum cutting height 120 mm -maximum Board width 500 mm -Working height 700 mm -Feed speed approx. 0.2 m / sec -Feed drive gear motor 0.55 kW / 3 x 400 V, 50 Hz Built about 1965 Weight 1600 kg Engine No. 314 Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Table dimensions: 940x560mm Be hem length: 3200 mm Dimensions Formatschiebeschlitten: 360x146x3200mm Max cutting height 90 ° / 45 ° with preliminary Ritz: 138 / 98 mm Max width of the lengths left by the saw blade: 3260 mm RIP fence cutting width: 1270 mm Blade angle: 90 °-45 ° maximum blade diameter with ago Ritz: 400 mm Before Ritz saw blade diameter: Ø 120 mm Rotation speed of main saw blade: 3500/5000 min-1 speed scoring sawblade: 9200 min-1 engine power 400 V / 50 Hz / S6 - 40%: 7 kW (9,5 HP) Engine power before Ritz: 0.55 (0.75 kW) Dust extraction outlet diameter: 120 mm AbsaugstutzenØ blade guard: 60 mm M-design: with electric height adjustment and tilting the saw unit G & pieces 5504756
used
Sales counter for bakers shop or bakery shop length 5230 m, consisting of individual parts, with Kühltehke, and bread shelf for rear wall see pictures and sketches in light oak surface built in 2012
used
Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg
used
Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.
used
really well maintained, equipped with simple CNC control. Saw blade diameter 400 mm This section at 90 ° round 130 mm rectangle 240 x 85 mm flat 180 x 70 mm in MITRE at 45 ° profiles Portrait 120 x 55 mm Feed length with double lifting device to 2 cutting speeds 10/20 m / min. Speed infinitely variable 0-1000 mm / min. Drive motor 400 V, 1.7/2,6 kW Weight 1350 kg Dimensions W x D x H 2750 x 1500 x 1900 mm Accessories: Spray cooling device "Mini pos 807", Blade, roller conveyor, manual.
used
4 sides trimming line
used
MADO Selekta bandsaw
new
Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750
new
Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850
used
Saw blade diameter: 400 mm cutting capacity at 90 ° round: 130 mm cutting capacity at 90 ° square: 200 x 80 and 315 x 40 mm cutting capacity in MITRE at 45 ° square: flat/vertically 180 x 70 / 100 x 60 mm cutting speed: 19/28 m / min drive motor: 380 V, 1.7/2,6 kW space: 1100 x 1050 x 1620 mm weight: 850 kg
used
3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...
new
MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET
used
slicer for curry sausage bandwidth: 300 mm, cuts for 12 mm construed.
used
Full frame saw Balfour boy with Chuck wagon Wood diameter of exceeding 60 cm Engine 55 kW L x W x H: 230 x 200 x 400 cm Weight approx. 8 to Built in 1958 Disassembly by buyer The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.
used
Complete sawmill for production of about 100.000 m³/1 shift operation. Complete mill including infeed, debarking machine, scanner, canter sidebordsaw edger, curve saw equip,ment, waste disposal, stacking machine for main boards. Complete electric including 2 scanner type A-Vector. Simply complete mill
MADO Perfekta-plus MKB 649 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
Holweg RS 21 Bag making machine, for Flat- and satchel bags, with in-line printer and window unit. Holweg Rotosimplex 21, Year of production : 1981 with 4 colors inline printer W&H QMS 992, 4 anilox, 4 rubber cylinders. Bag width 70 – 380 mm Gusset depth 12 – 80 mm Bag length 145 – 660 mm Cut length from 160 to 680 mm Max paper width 900 mm, Max print width 860 mm Bottom from 13,3 to 18,3 mm ( on this machine also possible for bigger bottom fold ) Max. speed 800 bags/min. Paper 30 – 125 g/m2 Foil window unwinder. Printing format cylinders 41 pcs. (270-1, 290-4, 300-1, 320-3, 350-3, 360-2, 370-1, 400-4, 420-4, 440-3, 470-4, 520-1, 600-4, 640-4, 680-2) Forming plates 28 pcs. (80,85,90,100,105,110,115,120,130,140,150,155,160,170,175,180,185,190, 200,210,220,225,230,240,250,270,300,320) Equipment for 5 sizes of wicket bags: (cut lengths 400,350,450,470, 520) ...
used
; operational
Kolbe K 220 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
Kolbe K 300 band saw, stand-alone-version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
used
PIN cutting machine Clamping width of 240 mm beam height of 320 mm spigot strengths of Max 130 mm PIN length of 350 mm motor power 2,2 kW 380 Volt motor weight approx. 120 kg
used
MADO used Selekta bone bandsaw Machine runs loud, and therefore has no brake at a bargain price before use the machine must be cleaned thoroughly
Much sheet saw with Electr. Width adjustment from 1 sheet Chain width 250 mm unit 220 mm cutting height of 150 mm 15 kw motor
used
used
used
used
Made in 1995 in Denmark. Machine No. 9585037. Made in 1995 Transport dimensions: 1800x620x2000 mm. Weight: 400 kg
used
CRDM3050X16 year of construction 2007 discharge 1600mm with Wuerfeltisch. Good condition ; ready to use
used
Revolving crosscut saw with extremely accurate length cutting for wood. High-precision cutting with servo-drive. Suitable for maximum dimensions cutting width up to 370 mm. Machine length: 4.400 mm
used
Band saw Kirchner Roll á 800 mm Cutting height 300 mm L x W x H: 130 x 80 x 230 cm Weight approx. 750 kg Built in 1944 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Pendulum saws Bacus for wall mounting Saw á 500 mm Built in 1982 L x W x H: 70 x 60 x 100 cm Weight 370 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Full frame saw Boegli MARA-2 with Electr. Switchgear with associated Chuck Wagon (REF. No. 262-1491) Masch. No. 373 Through root á 600 mm With hydr. Sheet tensioning device L x W x H: gate 260 x 200 x 450 cmm Weight approx. 1200 to Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Saw mill vertical Boegli Weight 4000 kg L x W x H: 200 x 160 x 330 cm Roll diameter 1250 mm Stem á 1.2 m, with mechanical clamping cars 9 m Chuck Wagon L x W x H: 900 x 200 x 170 cm Weight approx. 6000 kg Built 1952 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Rotary feeder, modern bottom opening station, CCS control system, 2 valve units, bottom patch with 2 colour tail end printers
new
Overhauled: 2018 Year of construction: 2001 Blade 315-360 mm Motor power 15 KW Speed 15 - 130 min-1 Cutting speed 350-16.4-142.8 m / min Saw height control: electronic Working range Max square: 120 x 120 mm Workspace flat Max: 160 x 120 mm Work area round maximum: 140 mm Saw speed 0-65 mm / s adjustable Section length 5-970 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight 1600 kg Dimensions Lxwxh 1900mm x1250mm x2100mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled on request in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive ...
used
Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.
new
Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...