We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,383 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Weiss Temperature Test Chamber KWP 64/75 Cooling-heating mode : -70°C ... +130°C Cooling: 2.5 approx. k/min Heating: 3.0 approx. K/min Temperature stability: +-0.5...+-1.0K Insertion dimensions: height 1360 mm, width 880 mm, depth 1000, mm External dimensions: height 1215 mm, width 800 mm, depth 960 mm Test chamber dimensions height 400mm, width 500mm, depth 325mm The connection voltage is: 230V/1Ph+N+PE/ 50 Hz (+6%/-10%) Gplvqvbz Connected load: 1.4 kVA Plug: Schuko 16A Weight : 180 kg Type: KWP 64/75 The Weiss temperature chamber has been monitored with calibrated and calibrated test equipment!
used
brinell hardness: xx rockwell hardness: xx throat: x mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
brinell hardness: 250 kg rockwell hardness: 150 kg throat: 125 mm workpiece height max.: 200 mm weight of the machine ca.: 70 kg dimensions of the machine ca.: 400 x 200 x 700 mm Test load: 62,5 / 100 / 150 / 187,5 / 250 kg Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: SPECIFICATIONS Test subjects to check molds Character: SAB Type: GKP220BT Table length: 2,200 mm Panel width: 1,500 mm Approx. Onsite Dimension. (l x w x h): 3,600 x 3,300 x 1,700 mm, weight approx.: 10,000 kg
used
Description: Includes accessories such as replacement tips, dial gauge holder and more. (see pictures) Approx. Onsite Dimension. (l x w x h): 400 x 350 x 100 mm, weight approx.: 10 kg
used
MFR/MVR Tester Ceast 7026.000 Year of construction: 2010 Equipment and accessories see pictures Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.
used
Description: EMCO EMCOTEST Hardness Tester Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,850 mm, weight approx.: 250 kg
used
Description: incomplete Approx. Onsite Dimension. (l x w x h): 350 x 150 x 80 mm, weight approx.: 5 kg
used
Description: incomplete Approx. Onsite Dimension. (l x w x h): 350 x 150 x 80 mm, weight approx.: 5 kg
used
Description: Additional information: Universal gear testing machine 898 C, determination of the rolling deviation, the rolling jump and the rotational backlash on external and internal gear spur gears with straight and helical teeth, as well as on bevel and worm gears. Testing of individual deviations, concentricity deviation and tooth thickness fluctuations on spur gears, bevel and Worm wheels, technical data: Voltage 220 V, - Adjustable axis distance between centers 25 - 300 mm, Flying mount 25 - 550 mm, - Maximum permissible wheel weight, on the adjustment slide 250 kg, on the measuring slide 100 kg, with abutment 898 CD-w4, Center distance on the measuring slide 50 - 750 mm, projection 140 mm, min. center distance 65 mm Accessories: Base cabinet 898 C-us, feed slot 898 CD-S2, electrical equipment 898 CD-e, abutment 898 CD-w4 (tip distance 150-750 mm), electronic precision display dev ...
used
Description: Technical details: Brinell 15.625, Rockwell 60-150 HRC, projection 130 mm, additional information: completely overhauled: 09/2000, conventional hardness testing machine according to Vickers and Brinell, manufacturer: WOLPERT, type: Dia-Testor 2Rc (1-lever device), test load levels : Vickers: ( 1 / 2 / 3 ) 5 - 10 - 20 - 30 - 40 - 50, Brinell: 15.625 - 31.25 - 62.5 - 125 - 187.5 - 250, Rockwell: 10 preload - 60 ( HRA) - 100 (HRB) - 150 (HRC), load levels for Vickers marked above can only be calibrated to a limited extent. The different load levels are set using load selection pushbuttons. Test space (H/D): 300 / 130 mm Approx. Onsite Dimension. (l x w x h): 940 x 350 x 620 mm, weight approx.: 200 kg
used
Description: Gauge treasure 5413-2011 Type: 5413-2011 – RS 232 C Torque tester - Torque Measuring System unit Approx. Onsite Dimension. (l x w x h): 450 x 250 x 150 mm, weight approx.: 10 kg
used
Resato HBU-B160 Gas High Pressure Workshop Testing System The oil and gas industry is all about the extraction of crude oil and natural gas. One of the challenges is to make the best use of the assets to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components for oil and gas production. By injecting a chemical liquid, the well is stimulated. With the controller, high-pressure systems control and regulate back pressure and liquids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Test System Type: HBU-B160 Max. pressure: 200bar Max. Capacity: 1570cc/ Max. pressure: 7 bar 2 x Gas Bottle Cage 3 x gas cylinder trolley Digital control panel is missing More items - new and used - can be found in our shop! International shipping costs on ...
used
tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case -Type: TruCheck 2 Plus -Part No.: 43521 -Measuring range: 3 - 65 Nm -Mounting: 3/8 -Accessories: see photos -Dimensions: 205/60/H110mm -Weight: 3.8 kg
used
Description: Serial number 215151208 With granite measuring table 400 x 250 mm, with recessed T-slot Pillar height adjustment approx. ,300 mm Approx. Onsite Dimension. (l x w x h): 400 x 300 x 600 mm, weight approx.: 50 kg
used
Description: Box 1 diameter 1.00 to 5.00 mm in 0.01 mm graduation, not complete Box 2 measuring range 5.05 to 10.00 mm, graduation 0.01 mm, not complete Approx. Onsite Dimension. (l x w x h): 400 x 150 x 180 mm, weight approx.: 10 kg
used
Paul Köster leak testing system for die-cast aluminium or cast aluminium housings in good condition. 2 city ions with workpiece carrier system for different tool holders. Connection option for compressed air and hydraulics directly on the workpiece carrier. Test container approx. 1600 x 2200 mm, depth approx. 900 mm. The system was used to test die-cast aluminium gear housings. Immediately available from stock. Special price free trucks loaded until the end of November 2023 on request.
used
Description: Measuring range HLD (170-960), Measuring direction 360°, Hardness scale: Standard Leeb, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers, Shore Hardness (HL, HB, HRB, HRC, HRA, HV, HS), in anti-shock carrying case. CE certified. With printer The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 300 x 140 x 370 mm, weight approx.: 5 kg
used
Description: Measuring range HLD (170-960), Measuring direction 360°, Hardness scale: Standard Leeb, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers, Shore Hardness (HL, HB, HRB, HRC, HRA, HV, HS), in anti-shock carrying case. CE certified. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 130 x 260 x 330 mm, weight approx.: 4 kg
used
Description: Roughness tester for internal and external measurement in unbreakable ABS case 120 x 46 x 68 mm. 3.7 V Lithio rechargeable battery and 220V charger included. Portable roughness tester characterized by high precision, wide range of applications and ease of operation. Recommended for tests of surfaces of all types of metals and non-metals. 128 x 64 Dpi piezoelectric diamond LCD sensor. Memory of 100 groups of measurements. Including reset glass plate. Battery charge indicator. USB data output with PC cable and software included. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 370 x 310 x 125 mm, weight approx.: 5 kg
used
Description: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 530 x 400 x 750 mm, weight approx.: 82 kg
used
Description: It is a 3D coordinate measuring system from the XM series from Keyence consisting of: o Measuring head XM –T1000 (two measuring probes) o XM-1500 measuring system o Adhesive plate for XM series o AC power cable o Mouse and keyboard Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 60 kg
used
Tensile and compression tester Manufacturer: Ametek Lloyd Type LRX Plus Serial No. 108476 Year of construction 2011 Measuring range 0.2 N – 5 kN (when using interchangeable measuring cells) Weight 50 kg Maximum load 5 kN (1100 lb) (tensile and compression test) Force measurement accuracy - better than 0.5%
used
Description: please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 400 x 400 x 200 mm, weight approx.: 15 kg
used
Description: The almost new 8 MW transmission test station is operated from a central control station. Some of the test energy input can be fed back into the power network. Inventory number: 9000945 , Year of construction: 2018 Data on the three-phase asynchronous machines Nominal output: 7.7MW Maximum output: 8.47MW Nominal speed: 1150/min Maximum speed: 2200/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm Main shaft data Nominal speed: 8.99 rpm Nominal torque: 6000kNm Maximum torque: 8800kNm Cooling system Cooling capacity of the cooling tower: 900kW Coolant volume flow: 160m³/h at 4 bar and 30°C Nominal pressure hydraulics Hydraulic system main shaft: 250 bar at 100 l/min Hydraulic system quick coupling: 300 bar at 1 l/min Hydraulic system generator (lifting/lowering) 150 bar at 8 l/min Oil system: 8 bar at 120 l/min General data Operati ...
used
Description: Tailstock moveable with fixed centers Approx. Onsite Dimension. (l x w x h): 750 x 300 x 750 mm, weight approx.: 50 kg
used
Description: serial number: AZ9853444 control: SIEMENS Coros OP15 Approx. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 2,500 mm, weight approx.: 2,500 kg
used
max. wheel diameter:5 - 260 mm gear width:400 mm max. module:15 min. module:0,5 gear hobbing diameter - internal:30 mm max. helix angle:> 85 ° Aussenverz. max. helix angle:> 45° Innenverz. Testing Range vertical:400 mm dist. between centers:5 - 600 mm table diameter:260 mm max. table load:100 kg speeds:30 1/min total power requirement:1,6 kVA weight of the machine ca.:900 kg dimensions of the machine ca.:200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)
used
Electronics module PAGUS DIAGNOSTIC TESTER 24 V DC MA02800501 R900088121 16-PIN outputs 9-PIN INPUTS 3-PIN SUPPLY 4-PIN ABS LINK Operating voltage: 24 V DC used, tested ! Dimensions: 270 x 60 x 160 mm
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
E-welder ESAB type LTG 250 Rod electrode welder Masch. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: infinitely variable - electrode holder with 6 meters connection cable - DC fan - air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 1200 x 750 x 1050 mm Weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not available and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore sold only as an electrode welding machine.; used
used
Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used
used
used
used
used
Spot hump welding machine NIMAK type PMP 5 / 35 spot welding machine, projection welding machine Fabr. No. 88100 Year of construction approx. 1988 Power at 50% ED 35 kVA Radius 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm 60 mm Electrode holder 30 mm Insert electrodes Cone MK 2 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connection load 83 KVA Mains connection 380 volts, 50 Hz - 4-times control - stepless power adjustment - single points and series points - bulging electrode guide - water-cooled (without cooling unit) - electric foot switch Space requirement L x W x H 1200 x 650 x 1500 mm Weight 300 kg good condition; used
used
New ESAB Miggiytrac 1001 electr. Welding chassis Speed: 0.5 - 1.2m/min as new/unused (may show signs of storage) in OVP These are unused goods in their original packaging, which can only show signs of storage. This and further details can be found in the photos. Price excl. VAT (#7717).
used
Inverter welding machine for MMA welding TECHNOLIT type PROFImat 170 Plus MMA welding machine, inverter welding machine, electric manual welding inverter Serial no.: TB1703500316 Item no.: 440030 Year of construction 2022 Power TIG (DC) 170 Amp. 45% ED 150 Amp. 60% ED 135 Amp. 100% ED Power MMA 170 Amp. 35% ED 145 Amp. 60% ED 125 Amp. 100% ED Adjustment range 5-170 Amp. infinitely variable Mains connection 230 Volt, 50 Hz hot-start function (optimises ignition behaviour, simplifies welding start of electrodes that are difficult to ignite)- Anti-stick function (optimises electrode guidance and prevents electrode from sticking)- Arc force function (optimises arc stability and improves penetration) - Lift-Arc ignition - Rod electrode welding, can be used for all electrode types up to 4 mm- Ground cable with plug connection - Electrode rod with 3 meter cable and plug connection - equippe ...
used
used
Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg
used
Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder -Manufacturer: GPA, plastic socket welding machine type PF063-HA -Voltage: 230V -Power: 800W -Temperature range: up to 260°C -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 440/240/H125 mm -Weight: 8.5kg