tc 630 used for sale

Submersible pump, chemical pump, water pump, centrifugal pump FLUX - GERÄTE GmbH Type 630 Material: PP Immersion Depth: 1140 mm Pump base: Ø 150 mm Pump flange: Ø 265 mm bolt circle diameter: Ø 225 mm 8x bore: Ø 17,5 mm Motor: BAUKNECHT RF 1.5/2-72 2,2 kW 2880 rpm 220 / 380 V 3AC 50 Hz IP44 Suction strainer slightly damaged used, checked ! Dimensions: 1710 x 270 x 270 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 630 25D 78711412/N 88242046-00 DN25 PN10 Installation dimensions: 120 mm Control pressure: 5,0 - 6.0 bar Valve body material: PP diaphragm material: EPDM Base plate: 132 x 71 x 15 mm hole spacing: 110 mm 2x bore: Ø 9.5 mm New ! Dimensions: 145 x 132 x 210 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 630 32D 78711413/N 88278021-00 DN32 PN10 Installation dimension: 135 mm Control pressure: 5,5,0 - 6.0 bar Valve body material: PP diaphragm material: EPDM Base plate: 150 x 85 x 10 mm hole spacing: 125 mm 2x bore: Ø 9.5 mm New ! Dimensions: 165 x 150 x 280 mm

Universal clamping table, swivel, tilt and turntable table, T-slot plate PAGUS clamping area: 630 x 270 mm 5 grooves slot width: 12 mm table can be tilted back and forth from 90° by 30° table can be tilted left and right by 15° and swivel left and right by 45° New ! Dimensions: 650 x 290 x 290 mm

Bridge rectifiers, rectifiers LENZE 14.630.13.004 voltage: max. 3270 V AC current: max. 1 A New ! Dimensions ( rectifier ): 52 x 26 x 18 mm Dimensions ( package ): 56 x 37 x 22 mm

Bath warmer, immersion bath warmer MAZURCZAK ROTKAPPE® B-PS 630/2,2-400Ds Item no.: 1003042001 P: 2200 W ( 2.2 kW ) U: 400 V 3AC immersion depth: 600 mm diameter: Ø 54 mm IP65 approx. 1.4 m Connection cable New ! Dimensions: 710 x 117 x 94 mm

Rotary vane vacuum pump lubricated Manufacturer: Busch Type: R5 RA 0630 B Status: Maintained, very good condition, used Performance: 6 months suction valves: 630m3/h solvent: mineraloil

Lever hoist, ratchet hoist PAGUS Load capacity: 6300 kg stroke: 3000 mm with roller chain used, tested ! Weight: 59 kg Dimensions: 1000 x 800 x 230 mm

Servo Motor, AC Servo Motor, Permanent Magnet Motor BOSCH SG-B1.016.060-00.000 Z-No.: 1070917157 0,0,95 kW 6300 rpm 4.5 A IP65 Shaft diameter: Ø 14 mm Wavelength: 22 mm Flange: Ø 60 / 70 x 70 mm bolt circle diameter: Ø 75 mm hole diameter: Ø 5.5 mm used, tested ! Dimensions: 165 x 70 x 102 mm

Clamping cylinders, small cylinders, hydraulic cylinders, round cylinders, single-acting PAGUS Type ZKP-6300-C piston diameter / rod diameter: Ø 45 mm Material: Brass Stroke: 20 mm Female connection: 1/4 ( inch ), Depth: 15 mm Flange diameter: Ø 70 mm, Length: 25 mm Case diameter: Ø 60 mm, length: 35 mm New ! Dimensions: 70 x 70 x 65 mm

Deep groove ball bearings, ball bearings, single row deep groove ball bearings, 8 pieces ROLLWAY 6308C3 Inner diameter: Ø 40 mm outer diameter: Ø 90 mm height: 23 mm New ! Dimensions ( single bearing ): 90 x 90 x 23 mm Dimensions ( packaging ): 190 x 95 x 100 mm

Deep groove ball bearings, DKF 6302 Z ( 10 pieces ) d = inside = 15 mm D = outside = 42 mm B = width = 13 mm Price for 10 pieces ! for larger quantities please ask for the prices Minimum order value 50,- €

Marx Transformatorenbau GmbH & Co. KG Transformer Type: DAY 516 Pri: 3x480V/777A Sec: 3x400V /909A 60Hz 630kVA Two Wöhner LTS-3 630A load disconnectors are installed at the tap, each equipped with three Siemens 400A and 630A NH3-gG.

Capacity/h: 6000 P/h Condition: excellent, ready for operation Tetra Pak TBA 8 1000 ml Slim Line Filling Machine with Screw Cap Applicator TCAP 47 consists of: TBA 8 1000 ml Slim Line Filling Machine V100, Pull Tab Applicator PT 8, Tetra Cap Screw Cap Applicator TCAP 47. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

Tetra Pak (opt.WRAP AROUND) Tray Packer TCBP 70, year 2000.The TCBP 70 Packer is available as Multi-Infeed , MED, in various Volumes available at our warehouse. Nominal capacity 7000 p/h

Capacity/h: 6000 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 8 Slim Line 1000 ml Filling Machine with ReCap 2 consists of: TBA 8 1000 ml Slim Line Filling Machine, Pull Tab Applicator PT 10, Tetra Cap Screw Cap Applicator ReCap 2 and Packer TCBP 70. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

The TCAP 21 ReCap 2 is a high quality and cost efficient closing solution. For Fillers with PT the ReCap 2 combines needs in quality and cost. Additional the Product get a real functional and save closing solution.

Tetra Pak (opt.WRAP AROUND) Tray Packer TCBP 70. Adjustable to many package and tray sizes. Nominal capacity 7000 p/h

Capacity/h: 6000 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 8 LSC 1500 sl Filling Machine with PT 8 and TCAP 47 consists of: Tetra Pak TBA 8 LSC 1500 sl Filling Machine with PT 8 Ascrew cap Applicator TCAP 47, Packer TCBP 70 and Conveyors. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

Condition: excellent, ready for operation Tetra Pak TBA 8 1000 sl consists of:Tetra Pak TBA 8 1000 sl with Pull Tap PT 10, TCAP 21 ReCap 3 and Packer TCBP 70. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

The TCAP 47 Applicator is one of the high quality closing solutions.Additional with Filler and PT one of the most usual opening and closing Solutions. The TCAP 47 combines a high quality opening and closing solution at high standart and compfort in daily use.

he next development step of the basic opening solution in new shape and design for better usability. Better product flow is one of the key features. TCAP 21 ReCap 3 is a high quality and cost efficient closing solution. For Fillers with PT the ReCap 2 combines needs in quality and cost. Additional the Product get a real optimized functional and save closing solution. Option: Conveyors and Cardboard Packer with or without Wrap Around, Tray Shrink, etc...

TETRA PAK WRAP AROUND CARD BOARD PACKER, MODEL TCBP 70, MANUF. IN 2003, EXCELLENT CONDITION, VERSION 110, U-FORM. LAST WORKED FOR 1000 PRISMA.

MWM TCG 2020 V12-Nr. MWM TCG 2020 V16

Characteristics Manufacturing: Tetra Pak Model: TCP 70 Volume: 500ml, 1000ml Format: Prisma Year of manufacture: 2001 Condition: in very good used condition

Characteristics Manufacturing: Tetra Pak Model: TCAP 45 Volume: 1000 and 1500 ml Format: Slim Year of manufacture: 2004 Condition: in very good used condition

Characteristics Manufacturing: Tetra Pak Model: TCAP 21 Volume: 1000 and 1500 ml Format: Slim Year of manufacture: 2003 Condition: in very good used condition

Characteristics Manufacturing: Tetra Pak Model: TCAP 45 Volume: 500 ml Format: Prisma Year of manufacture: 2003 Condition: in very good used condition

Characteristics Manufacturing: Tetra Pak Model: TCAP 30 Volume: 1000 ml Format: Slim Year of manufacture: 2013 Condition: in very good used condition

Servomodul BOSCH Typ SM 15/30-TCS01 DC 520V 15A 063915-102 520 V DC 15 A used, tested ! Dimensions: 460 x 340 x 60 mm

electronic ballast, digital electronic ballast, 5 pieces TRIDONIC PC 2/55 TCL PRO Art.No. 22 176 233 2 x 55 W 220 - 240 V AC / DC 50 - 60 Hz New ! Dimensions( single ballast ): 360 x 40 x 30 mm Dimensions( packaging ): 360 x 80 x 90 mm

centrifugal fans; Centrifugal blower Overall dimensions: 120x90x106 used, tested !

Ceiling lamp, wall and ceiling lamp TRILUX 7481 PC/TCD18 K Article number: 00161120 1x 18 W 230 V AC 50 Hz < br />Bulbs: TC-D 18W Socket: G24d-2 Ballast: VS VOSSLOH - SCHWABE LN 181.472 165814 with bulb OSRAM DULUX D New ! Dimensions ( ceiling lamp ): 410 x 410 x 50 mm Dimensions ( packaging ): 520 x 510 x 60 mm

Submersible pump, coolant pump BRINKMANN TC63/560-MUX Immersion depth: 560 mm Pump base: Ø 90 mm pump flange: Ø 130 mm Q = 60 l/min H = 55 m Engine: 1,1.0 7 kW 400 V 3AC used, tested ! Dimensions: 900 x 300 x 250 mm

Adapter for TC 110/120 PFEIFFER VACUUM TCS 12 PM 061 638-U Interface: RS-485 4 accessory ports Screw set New, with documents ! Dimensions ( adapter ): 67 x 45 x 32 mm Dimensions ( packaging ): 150 x 100 x 40 mm

Chip Conveyor, Hinge Plate Conveyor- Chip Conveyor, Hinge Belt Conveyor SILISTRA TCA 280 x 3221 Inlet: 3210 x 280 mm Free belt width: 280 mm Height inlet: 400 mm Height discharge: 950 mm Motor: 0,,55 kW 220 / 380 V 3AC coolant reservoir: 4450 x 550 x 230 mm coolant pump: APOLLO 4 KSEY-25-002 02-008-85-017 Q = 1,6 m3/h H = 63.5 m Engine: MEZ 4AP90L-4 1.5 kW 1410 rpm 220 / 380 V IP54 used ! Dimensions: 5000 x 1050 x 1250 mm

Actuator Heinzmann for engines MWM TCG 2020, type StG 30-01 for Basic System E30.

GPS CLEVERCAR Clever Speedometer TCO4

GPS CLEVERCAR Clever Speedometer TCO4

GPS CLEVER CleverCTacho Tco4 L, 2x CleverCTacho Tco4 L

GPS CLEVER Clevercar Pro4 and Clever Speedometer TCO4L

Thermofin roof condenser, type: TCH 100.1-15-E-N(D5), number: 701849-100-0001, year of construction: 09/2006, 5 fans, dimensions: 9950 mm x 1630 mm x 1500 mm.

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg

As good as new reversible base jaws Insert: Three-jaw chuck, helical toothing, Manufacturer for example: FORKARDT,RÖHM ,SCHUNK;,SMW-Autoblock Power chuck type on request? Designation of the base jaws FGB-630; FGB630 (FORKARDT) for the construction of commercially available, reversible, hard top jaws Three-jaw wedge rod chuck ø 6300mm: Hand chuck F630, Duro630; THW630 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 65 mm H = 62 mm L = 230 mm N = xx mm S = 24mm La= 82mm Thread M20 Weight approx. 8-10 Kg /piece Price on request:

Wheel diameter: 630 mm Cutting height: 385 mm cutting width: 610 mm Motor output: 2,2 kW Table dimensions: 630 x 630 mm machine weight ab.: 380 kg Roll diameter: 630mm Cutting speed: 1620 m/min Motor power: 2.2 kW Speed: 1,400 rpm Blade length min/max 4380/4500 mm Table: 630 x 630 mm Weight 380kg (technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Marel Stork THV 630 former is used for shaping and forming various meat products, such as burgers, meatballs, nuggets, sausages, and patties. It helps create uniform shapes and sizes for consistent portioning and presentation. THV 630 former has a belt width of 630mm. This width allows for efficient processing of meat products within that range. Marel is known for prioritizing hygiene and food safety in their equipment designs. The THV 630 former is designed with features that facilitate easy cleaning and sanitization. It typically has removable parts, smooth surfaces, and meets the necessary food-grade standards. The THV 630 former is equipped with advanced automation and control systems. These systems offer precise control over shaping parameters, production speed, and product consistency. The automation features help improve efficiency, reduce labor requirements, and ens ...

Injection moulding machine ARBURG Allrounder 630 H 2500-1300 Stock No.: 503408 Manufacturer: ARBURG Type: Allrounder 630 H 2500-1300 Control: Selogica direct Year of construction: 2019 Hours: 3517 h Technical Data Closing Page Clamping force: 2500 kN Holm v: 630 mm Holm h: 630 mm Plate size h: 900 mm Plate size v: 900 mm Min. installation height: 400 mm Installation height max.: 950 mm Plate spacing max.: 1500 mm Aperture travel: 550 mm Ejector stroke: 225 mm Ejection force: 86 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 60 mm Displacement: 678 ccm Spray pressure: 2000 bar Auger length: 20 l/d Auger stroke: 235 mm Screw speed: 60 min Worm torque: 1640 N Number of heating zones: 8 Nozzle travel: 550 mm Dimensions & Weight Machine dimensions LxWxH: 7.2m x 2.1m x 2.2m Total Weight: 1 ...

grinding diameter: 630 mm grinding length: 4000 mm centre height: / mm weight of the machine ca.: 32000 kg Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. Grinding Dimensions: 630 x 4000 mm Weight: 32,000 KG HS-Code: 84602910 Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. The 3M194 not only offers impressive dimensions but also incorporates innovative technology, en ...

MIKROMAT Model / type:BKoE 630x1000 Technical data: > Mikromat BKoE 630 x 1000 > table clamping surface 1000 x 630 mm > longitudinal travel of the table 710 mm > cross travel of the table 700 mm > travel of headstock 630 mm > spindle stroke 200 mm > distance between spindle nose and table 20-850 mm

USED KRAUSS MAFFEI HZ 630 PH CENTRIFUGE REF.: C6486 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 630 Ph Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm