140,936 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Rippert, Filter system - positive pressure: yes, Volume flow rate m³/h: ca. 7.500, Number of filter filter gallerys: 2, Required space L x W x H mm: 4.800 x 1.800 x 4.700,
Container turning device, roller block PAGUS load capacity: approx. 10 t per trestle 3 pieces wheel diameter Ø 320 mm without drive ! weight: 3 x 950 kg Dimensions: 3 x 2020 x 870 x 1100 mm
Manufacturer: Silo, Year: 2006, Capacity m³: ca. 250, Length mm x width mm x height mm: 7800x6582, Year :2006
Specifications: Lifting capacity: 100 tons 1-side driven Smallest diameter: 480 mm Largest diameter: 4800 mm Diameter rollers: 700 mm Motor power: 2 x 0.75 kW Rotation speed infinitely variable Side rollers for moving on rails Dimensions (length x width x height): approx. 3900 x 1300 x 1300 mm Weight: approx. 7 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
: 3 : 900 mm centre distance: 2x 4mm mm Distance between centres: 1x 5 mm mm capacity: 600 kp : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 100 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 240 mm feed: 100 - 1000 mm/min total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 80 t workpiece diameter: 850 - 5500 mm drum diameter: 450 x 240 mm feed: 100 - 1000 mm/min total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 450 x 180 mm feed: 100 - 1000 mm/min total power requirement: 5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Standing stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³ Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 150 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 300 mm feed: 100 - 1000 mm/min total power requirement: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 1000 kg workpiece diameter: 20-800 mm connected load frequency: 230 V speed: 100 - 1000 mm/min total power requirement: 0,1 kW weight of the machine ca.: 65 kg dimensions of the machine ca.: 520x470x390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used heating container from our own plant construction, optionally with oil or gas firing, ideal for failure prevention or bridging in the high output range (e.g. industry, residential complexes, etc.), integrated heating oil tank.
weight max.: 3000 kg workpiece diameter: 20 - 1500 mm drum diameter: 100 x 200 mm connected load frequency: 230 V total power requirement: 0,12 kW dimensions: 0,8 x 0,37 x 0,36 m speed: 100 - 1000 mm/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 t workpiece diameter: 250 - 2500 mm drum diameter: 250 x 100 mm feed: 100 - 1000 mm/min total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical GRP tanks, polyester tanks with flat bottom with slope Volume: 50,000 L Dimensions: Ø 3.00 m × 7.25 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 480 x 180 mm feed: 100 - 1000 mm/min total power requirement: 2 x 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 20 t workpiece diameter: 500 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 51,000 L Dimensions: Ø 3.00 m × 7.80 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
weight max.: 20 t workpiece diameter: 500 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 1,5 kW weight of the machine ca.: ca. 1,8 t Dimensions (LxWxH): 2,2 x 2,7 x 0,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 t workpiece diameter: 250 - 2500 mm drum diameter: 250 x 100 mm feed: 100 - 1000 mm/min total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 80 t workpiece diameter: 850 - 5500 mm drum diameter: 450 x 240 mm feed: 100 - 1000 mm/min total power requirement: 2 x 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 2,2 t workpiece diameter: 101 - 1524 mm feed speeds infinitely variable: 0 - 3600 mm/min gear diameter: 254 mm gear width: 76 mm total power requirement: 0,5 kW weight of the machine ca.: 0,245 t dimensions of the machine ca.: 1,02 x 0,82 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. With two twist-off heads the rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 17 cycles/minute (corresponds to max. 35 bottles/container per minute) | conveyor belt speed can be adjusted accordingly: 0-15m/min | bottle diameter: two ranges: a) 30-85mm, b) 80-150mm | lid diameter: customized | adjustable height of the twist off heads: 50-180mm | vacuum degree: -85kpa | materials used: mainly stainless steel 304 | protective screens and links of the conveyor belt are made of plastic | machine dimensions: L1800xW660xH1700mm | weight: 650kg. The machine phot ...
A total of 15 (15x) stackable IBC containers for bulk goods are available. The containers were used in the food industry for the storage of spices, but have no foreign odor. Volume: approx. 750l, steel type: stainless steel 1.4301, mandrel lid diameter: 400mm, drain disk valve: DN 250, container dimensions X/Y/Z: approx. 1200mm/1000mm/1450mm. On-site inspection is possible.
Container Press SMC/CP 1100 Used Equipment Used device is kpt. reconditioned, wear parts were replaced, incl. oil change and new hydraulic hoses incl. UVV safety test and protocol, 6 months warranty Pressing force: 3.5 tons Swivel stroke: 95 degrees Connected load: 230 V/ 1.5 KW Machine dimensions: 980x 1190x 1900 mm WxDxH Machine weight: 250 kg
Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. 1 head rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 20 cycles/minute | conveyor belt speed can be adjusted accordingly: 0-15m/min | bottle diameter: two ranges: a) 30-85mm, b) 80-150mm | lid diameter: customized | adjustable height of the twist off heads: 50-180mm | vacuum degree: -85kpa | materials used: mainly stainless steel 304 | protective screens and links of the conveyor belt are made of plastic | machine dimensions: L1800xW660xH1700mm | weight: 650kg. The machine photo shows an open machine without protective covers and safety doors for a bet ...
Capping Module to screw caps onto containers. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 160 cycles/minute | cap diameter: 15-70mm | container/bottle diameter: 35-140mm | container/bottle height: 50-300mm | 220V, 2.7kW | machine dimensions: L2800xW900xH1880mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. Two containers can be capping per cycle and ensures a higher output per min due to the two screwing device heads. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | conveyor belt speed: 13m/minute | cap diameter: customized | power: 220V, 3.5kW | compressed air: 3-5bar, 0.1m? | materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic | machine dimensions and weight: L1450xW850x ...
Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 25 cycles/minute | conveyor belt speed : 0-13m/min | cap diameter: customized | power: 220V, 3.5kW | compressed air: 3-5bar, 0.1m? | materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic | machine dimensions and weight: L1450xW850xH1600mm, 350kg | Conveyor belt dimensions: Length approx. 2200mm (may be adapted), width approx. 110mm (customized ...
Capping Module to press caps onto containers. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 120 cycles/minute | cap diameter: 15-100mm | container/bottle diameter: 35-140mm | container/bottle height: 50-300mm | 220V, 2.7kW | machine dimensions: L2800xW900xH1880mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Machine to close (seal with film onto the edge of bottles, glases, cans, etc.) container with a neck diameter of 30-90 mm. Working direction: from left to right. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | 380V, 2.0kW | Machine dimensions: L1600xW800xH1160mm | weight: 180kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Installation: Indoors, material: PE100, internal dimensions X/Y: 1900mm/2200mm, internal drip tray dimensions X/Y: 2100mm/2000mm, useful volume: 6000l, liquid: HCl/Fe3Cl/H2O, density: 1.15kg/dm³, pressure: unpressurized. On-site inspection is possible.
maximum number of results exceeded
please refine your search
110 € 
