t10 used for sale

Ignition transformer, ignition transformer HEGWEIN STUTTGART Type: AF 800 T10 Primary: 220 V, 50 - 60 Hz 0.1 kVA Secondary (ignition voltage): 5 kV IP54 approx. 0.5 m ignition cable used, tested ! Dimensions ( without cable ): 155 x 125 x 85 mm

Radiator, heat exchanger, oil cooler ATLAS COPCO AKG SA T1067 0659.468.000 Connections: Ø 28 mm Flanges: 94 x 94 mm aluminum radiator used, checked ! Dimensions: 715 x 90 x 740 mm

Folding machine H+H KL 112-45-T10; built in 2002; good condition; cleaned and tested; Inlet width 450mm; 10 folding pockets; Investor Gremser FN-K-TH; Area dial counter HHC-100; Transfer No.220.1-45 built in 2016; 2.Falzwerk KL112.1-mobil-45 Bj.2016; 6 folding pockets; Standing sheet display No.177-mobil 45 built in 2013; Display No.701-1500-52 built in 2016. Folding machine H+H KL 112-45-T10; good condition; cleaned and checked; working width 450mm; ten pockets; feeder Gremser FN-K-TH; count unit HHC-100; hang up conveyor No.220.1-45 year 2016; secound unit KL112.1-mobil 45 year 2016; six pockets; smal format delivery No.177-mobil45 year 2013; stream delivery No.701-1500-52 year 2016.

Soco systems Model: T10 Case taper Serial: 49692 top and bottom case taper, side grip belts, max box 500mm L x 450mm W x 500H, mobile, 3Ph

Manufacturer: Soco System Model: T10 Year: 2006 Max box dimensions: height: 750mm wide:900mm LOWER GLUE HEAD IS MISSING !

Destoner Sangati T10

Very good deep hole drilling machine TBT T10-500. with cooler Drilling area: Drilling diameter 2-10 mm Max. drilling depth 500 mm Drilling method ELB Infinitely variable speed up to 8000 rpm Tailstock with counter rotation Automatic filter for coolant system Magnetic chip conveyor Full enclosure of the machine.

Proseal T10 tray sealer SN-M-04110 2017, variable temp control and seal time, tray dimension 200mm x 150mm, 1Ph

Deep hole drilling machine make TBT type T10-500Machine -No: 410 311 053 built in 1980Technical specifications:Max drilling depth: 500 mmDrilling range in steel: 3 -12 mmBoring max. 15 mmMin.spindle speed: 2520 1 / minMaximum speed of the work spindle: 8000 1 / minInfinitely variable feed: 8 - 160/35 - 320 mm / minRated speed continuously variable transmission: 5.9 - 53 / 11.8 - 106 1 / minControl range: 9Rapid traverse speed: 3 m / minCenter height above ground: 1150 mmCenter height over bed: 230 mmCenter height over table / slide: 180 mmTable dimensions: 420 x 1030 mmTable grooves design and size: DIN 650/4Coolant tank min / max: 590/670 ltrTotal connected load: 9.0 kWExternal dimensions: 3400 x 1700 x 1800 mmWeight approx: 2500 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are n ...

SACHMAN MILLING MACHINE Model T10 with flat guides Strokes: 2000 x 1050 x 900 mm Board 2200 x 710 mm SELCA 3045 CNC External coolant to the spindle 40-place tool changer KOSMO ISO 50 Automatic Head, 2500 rpm, indexing 2.5°/3°

Sachman T10 HS milling machine, fully functional, with recirculating roller guides, Step-Tech ISO40 electrospindle, Colombo Filippetti 32-place tool changer, casing and sunken chip unloader, etc. To facilitate programming operations in the NC Selca 30345 can be interfaced with a CAM that is very simple to use but equally effective.

Folding Machine HERZOG + HEYMANN M7/46 t10 Flat pile feeder MS-Control and couter with VACUSTAR Pump Maximum paper width: 52 CM Maximum paper length: 84 CM Minimum fold with short pocket modification: 50 MM Parallel fold unit with 10 buckle plates X-Knife Stream delivery A56 Anti noise hood Available december 2023

currently setup for thermoformed shells for pizza shell outer size 280 mm, inlay inside 230 mm, depth 20 mm shells useful also for flame cakes, crepes and similar products with gassing dimensions abt. 4.000 x 1.000 x 1900 mm overhauled 2012

Die Cutting Machine Unitec T1060 Die Cutting Machine Unitec T1060 The T1060 automatic machine with or whithout stripping is used to diecutting and creasing paper, cardboard and corrugated and operations for cardboard boxes, paper labels and especially for delicate printing jobs such as cigarette packages, wine, gifts and cosmetics, etc. This machine works automatically throughout its process, with a user-friendly interface to control the cutting speed, number of sheets cut, total operating hours and its working status, as well as to dynamically control the PLC inputs and outputs, and malfunctions to facilitate operation control and troubleshooting. In addition, the machine also features self-testing (e.g., double sheets, missing sheets, accumulated sheets, or fallen sheet detection) and continuous process sampling, while providing you with a solid cutting and accuracy registr ...

20-09-510 Edge Banding Machine WOODLAND MACHINERY (new) Type GB/T10850 Engine power 0.18 kW Air Pressure 3-6 Bar Voltage 220 V 50 Hz Total Power 1.4 kW Heating Capacity 1.2 kW Edge width 8-50 mm Edge thickness 0.3-3 mm Feed speed 0-26 cm/s Vacuum workpiece Attraction Transport Dimensions Weight 300 kg

BRAND: TERRACUBED YEAR: 2022 MODEL: T1000 PRODUCTION HOURS: 250 APPLICATION TYPE: 3D PRINTING LOCATION: LITHUANIA MACHINE TYPE: 3D PRINTER AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: DUET3 Technical Information CONTROL UNIT BRAND: DUET3 MODEL: MB6HC Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BUILD VOLUME: 1X1X1M - PRINT SPEED: UP TO 1M/S - EXTRUDER FLOW: UP TO 3KG/H - LAYER HEIGHT: 0. 5-2MM - NOZZLE: 1MM, 3MM, 5MM (CURRENTLY EQUIPED WITH 3MM ) - CALIBRATION: 3 POINT TRUE BED LEVELING + 100 POINT MESH BED LEVELING - MOTION: TECNIC SERVO MOTORS AND CONTROLLERS EQUIPPED WITH WEB CAMERA FOR REMOTE INSPECTION CONTROLLER WIRELESSLY - ACCURACY: 0,05MM - ANDROID TABLET IS INCLUDED WITH THE PRINTER QUALITATIVE MACHINE BENEFITS: - MAINBOARD IS DUET3 BOARD. IT'S DETAILS ARE AS FOLLOWS: REPRAPFIRMWARE FOR DUET 3 MB6HC FIRMWARE_VERSION: ...

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

Stock number: U2391 Used rotary tablet press by Killian (DE) model T100/18 EU-B. Machine has 18 punches. Die dimensions: diameter 30.16 mm x height 22.22 mm. Working output from 5400 tablets up to 129600 tablets, depending on size, shape and product. Maximal tablet diameter 16 mm. Maximal filling up to 16 mm. Machine has hydraulical compression. Pre-compression force up to 60 kN. Main compression force up to 65 kN. Machine has local control panel and electric cabinet with work recording computer and printer. Technical documentation included with machine. Toolings not included.

DALEX 50Hz AC welding transformer 160kVA Rated Power: 160kVA/50%ED Voltage Prim.: 400V50Hz Voltage sec.: 6.25 to 9.75V in 4 steps Weight: 223kg

Ref. -No.: 10370 Manufacturer: FANUC Year of construction: 1997 Type of control: CNC Control: FANUC Series 16-M Storage location: Halberstadt Country of origin: Irland X-Travel: 500 mm Y-Travel: 380 mm Z-Travel: 300 mm Machine length: 1560 mm Machine width: 2060 mm Machine Height: 2218 mm Rotary Table (Lxw): 650 x 380 mm Table Load: 200 kg Max. Tool Weight: 2 kg Max. Tool Length: 120 - 200 mm Max. Tool Diameter: 65 mm Tool change time: 1 s Tool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / min Rapid Traverse X-Axis: 48 m / min Rapid Travel Y-Axis: 48 m / min Rapid Traverse Z-Axis: 48 m / min Weight Of The Machine Ca.: 1,7 t Max spindle speed: 8000 min⁻¹ Positioning accuracy in one direction (1): 0,006 / 300 mm Positioning repeatability (2): +/- 0,002 mm ...

materials: LDPE HDPE PP installed power 260kw double degassing changer 200 mm cutting on the head (head for pp and ldpe) vertical centrifuge capacity ldpe 300-350 kg yield pp 320 kg depending on the material spare heaters mill knives etc. Second plasticizing system after complete regeneration

We sell 12 x Oracle/STK T10000D Tape Drives for SL8500 Libraries In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished conditions from a ...

We sell 3800 x Oracle/Storagetek T10000 T2 Tape Media In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished conditions from all these ma ...

approx. 4 pieces of stand-up ride-along tractor / pulling aids, Movexx, T1000 platform with Li-ion battery - used - : Price per piece incl. charging station: only 1.795.-€ (net), ex location! Manufacturer: Movexx Type: T1000 – PF M070 Year of construction: 2013 Tensile force: 1000 kg Max. speed: 6.6 km/h Weight: 70 kg Chassis: Steel, powder-coated Accumulator: Lithium LiFePO4 24V 36Ah/ 11.9kg Original price: approx. 4.200.-€ (net) Condition: good Available: now Location: Frankenberg warehouse / Saxony The MOVEXX T1000-Platform is your ride-on tractor for transporting rolling goods up to 1000 kg! It is ideal for use on longer distances. This electric tow tractor can easily move carts, industrial carts or wheeled roll containers without the need for any physical activity. The Movexx T1000 platform has a replaceable battery system. An empty battery can be  ...

Roughness measuring device from the Hommelwerke. The following parts are part of the delivery: - T1000E measuring station - The Hommel Tester LV15 with installed skidding probe T1E, ArtNr 240000 - Power supply for charging the batteries: Type FW 1289 - Control cable for the LV15 to the T1000E - Hommel Printer P 1010 with started paper roll and start print head. -Suitcase

Auxiliary switch, circuit breaker, circuit breaker, switch disconnector, switch disconnector, circuit breaker, circuit breaker, auxiliary switch, main switch -Manufacturer: Kraus & Naimer, main switch disconnector -Type: B T103/01 -Dimensions: 65/65/H105 mm -Weight: 0.2 kg

Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators, hydraulic accumulators -Pressure accumulator: with shut-off valve -Type: SA1 OM25 T100 -Dimensions: 740/113/H200 mm -Weight: 15 kg

Width 52 cm Year of construction: 2011 Round stack feeder 1st station: 10 fold pockets double downstream knife shaft Counting device MC-Control Shed delivery ASP 66-2 ME Machine condition: cleaned and tested Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Farina Trabattoni wood-fired coffee roaster for sale, 10 Kg/cycle, year 1958. Farina Trabattoni is an Italian family and artisan company that designs and builds wood-fired toasters since 1910. Revised and fully functional machine, maintained in excellent condition and condition. Trabattoni toasters are very robust machines and have a special double-cylinder oven made of insulating and refractory bricks to guarantee uniform heat. They are machines designed to guarantee a high quality product. Thanks to the brick oven and the cast iron castings we can toast with wood directly in the machine. Wood roasting is simple, cheap, but above all it guarantees a high quality roasted coffee. Upon request, it is possible to disassemble the machine and install it in your premises. The cost is not included in the sale price indicated for the toaster and must be quantified on a case-by-case basis.

fire: IDROMEC, Model: T1000x8000LS, Status: Used, non-refurbished, approx. 2,800 working hours, Year of construction: 2008, Shearing force: 1000 ton, Hold down force: 140 ton, Box length: 8 meters., shear throat: 900x700mm, Open box width: 3280mm, power unit: Electro 310 kW, Piston pumps: main pump by Rexroth, Control cabin yes, Remote control AUTEC, PLC: Semi-automatic cutting and baling cycle, Supporting legs: N.4 oversized hydraulic supporting legs/feet, Total weight: approx. 75 ton, Warranty: none, fire: IDROMEC, model: T1000x8000LS, Year of construction: 2008, shearing force: 1000 ton, Hold down force: 140 tons, box length: 8 meters., shear throat: 900x700mm, Open box width: 3280 mm, power unit: Electro 310 kW, Piston pumps: main pump by Rexroth, Total weight: approx. 75 ton, Warranty: none

• Case sealer with self adhesive tape • 1 Dispenser for top closure • Carton size (width x height) max. 400 x 400 mm • Carton length min 140 mm • Output 30 cartons/min • Tape diam. max. 385 mm, tape width 50 mm • Feeding table (width x length) 450 x 450 mm with pneumatic inclinable inlet flap • Electr. connection 400V/50Hz

Description: It is a 3D coordinate measuring system from the XM series from Keyence consisting of: o Measuring head XM –T1000 (two measuring probes) o XM-1500 measuring system o Adhesive plate for XM series o AC power cable o Mouse and keyboard Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 60 kg

Working diameter: 1000mm, working height: 450mm, max. workpiece weight: 900kg, noise level: 78dBA, connected load: 7.34kW, length: 3000mm, width: 3000mm, height: 3500mm, weight: 2.045t, operating hours: 9372h, including documentation, cabin with turntable, manganese lining, blast wheel (radial armouring, ceiling armouring, throwing blades in HM design), sieve, bucket elevator, separator, extraction system cyclone, filter (new filter cartridges installed), control panel electrical system, has been regularly maintained, on-site inspection is possible.

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 7 St. Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. + Drawer 1: - 1/4 inches: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8 inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2 inches: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4 inch ratchet: Torx nuts without bore T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with bore TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Imbus nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH ...

Description: Year of construction: probably 1986 Adjustment range: In the X-axis (table slide): 900 mm In the Y-axis (sanding head): 600 mm In the W-axis (moving crossbeam): 635 mm Feed speed: In the X- and Y-axis, direct current drive, infinitely variable: 5 - 2500 mm/min In the W-axis, three-phase drive: approx. 800 mm/min Measured value display: Smallest display unit: 0.001 mm Zero point can be selected as required Positioning accuracy (basic deviation X, Y): 0.004 mm Table: Usable table surface: 1020 x 860 mm Permissible table load: max. 800 kg Width of the T-slots: 14 mm Number of T-slots: 7 Distance between the T-slots: 100 mm Working range of the sanding head: Grinding spindle speeds, infinitely variable with electric motors: 4500 - 80000 rpm With air turbines up to 100000 and 160000 rpm Planetary speed, infinitely variable: 5 - 250 rpm Stroke of the grinding spindle sleeve: max.  ...

Several deep hole drilling machines to be delivered at once, approx. 10 pieces Ideal for drilling rifle barrels! These are the types: T 20-2-750 T 20-S-750 TE10-2-500 T30-1000 T10-2-250 T10-2-500 T20-500

Carton sealing machine,Soco type T10,5-8-7 semi automatic,for top and bottom sealing.

Carton sealing machine,Soco type T10,semi automatic,for top and bottom sealing.

Tape machine,Soco type T10 7-8-7,for top and bottom tape.

Table length: 2200 mm Table width: 710 mm Longitudinal X: 2000 mm Cross Y: 1075 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain MACH-id     6020 MAKE         Sachmann Italia TYPE           T10 GP YOP             2003 SPECIFICATIONS X-Axis        2000 mm Y-Axis         1075 mm Z-Axis         1000 mm Table load     3000 Kg Power on spindle        15 kW Spindle speeds          2200 Rpm Millinghead auto-index         2.5 X 2.5 ° Feed rate  X-Axis         25000 mm/min. Feed rate Y-Axis           25000 mm/min. Feed rate Z-Axis  ...

Description: Year of construction: probably 1979 Serial number: 274 Smallest display unit: 0.001 mm Zero point can be selected as required Guaranteed positioning accuracy: 0.002 mm Power requirement of the machine: 7 kW Suction capacity of the air compressor: approx. 9 m³/h Working area: Usable table surface: 595 x 320 mm Adjustment range of the table: 400 x 250 mm Stroke of the vertical slide: approx. 500 mm Max. Clearance between the sanding motor and table: approx. 480 mm Distance between spindle center and vertical slide: 310 mm Max. Sanding diameter: approx. 220 mm Sanding diameter with intermediate plate: approx. 280 mm Max. included angle for conical sanding: 12° Sanding head: Vertical stroke of the sanding spindle, infinitely variable: 3 - 110 mm Stroke speed, infinitely variable: up to 6 m/min Speed of the planetary movement, infinitely variable: approx. 5 - 330 rpm Speed rang ...

range L-W-H: 790 x 460 x 960 mm weight: 70 kg : 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4 premium ratchet. 1/4 knee joint 45 mm. 1/4 extension 100mm. 1/4 socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4 long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8 premium ratchet. 3/8 knee joint 55 mm. 3/8 extension 150mm. 3/8 socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8 long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2 premium ratchet. 1/2 knee joint 75 mm. 1/2 extension 125mm. 1/2 Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2 Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22 ...

Description: Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the Tool trolley is a stable worktop made of polypropylene Plastic. - The tools contained in the workshop trolley are made of chrome vanadium steel is stored in styrofoam/foam inserts. + Drawer 1: - 1/4' inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8' inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2' inch: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, ext ...

Description: Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4' premium ratchet. 1/4' knee joint 45 mm. 1/4' extension 100mm. 1/4' socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4' long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8' premium ratchet. 3/8' knee joint 55 mm. 3/8' extension 150mm. 3/8' socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8' long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2' premium ratchet. 1/2' knee joint 75 mm. 1/2' extension 125mm. 1/2' Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2' Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30mm. - DRAWER 3 ...

PC system from former POS workstation TOSHIBA 4818-T10, S/N QCQW00085001EH, Intel Celeron J1900, 4 GB RAM, 256 GB SSD, without software, Not suitable and/or intended for use within the meaning of § 146 AO, 1x mouse and keyboard, 1x barcode scanner DATALOGIC HD3130, 1x receipt printer TOSHIBA TRST-A10-SC1-QM-R

Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC

Spot welding machine make ARO type PSM 150Machine -No: 1021 Year 1986Rated power at 50% ED 15 kVAArm distance 190 mmProjection 150 mmElectrode holding force 95 - 318 daNOpen circuit voltage 6 steps 2.1 - 4.22 VShort-circuit current max. 29.5 kAMaximum welding power 100 kVAPrimary voltage 380 V / 50 HzWith- MIG-O-MAT- Control Aro T1000C, -No: 2062335 Code ZT488662- extended special electrodes 250 mm projection- Separate control cabinet with 6 power levels- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tank,stainless steel,closed top,standing on legs,tank cover in the top,Ø 2050 mm.

Tank,stainless acid proof steel,closed top,standing on legs,tank cover in the top,Ø 2050 mm.

Tank,stainless steel,standing for foundation,tank cover in the side,Ø 3500 mm.