swarf chip used for sale

Turning diameter: 700 mm Turning length: 1105 mm Turret positions: 12 CNC Brand: Fanuc DAEWOO - PUMA 350 CNC Lathe Ø 480 x 1050 mm MACH - ID 6305 Make: DAEWOO Type: PUMA 350 Control: FANUC YOP: 1998 Max. turning Ø   700 mm X-Axis     362 mm Z-Axis     1.105 mm Spindle bore      91 mm Speedrange       3500 Rpm Spindle power       26 kW ATC / revolver      12 Control       Fanuc 18iT Chip conveyor       Yes Pinole taperMk     6 Mk Stroke pinole        120 mm Dimensions Length     4.000 mm Width       2.400 mm Height      2.300 mm Weight      8.200 kg

turning length: 1000 mm turning diameter: 350 mm turning dia. in gap: 450 mm spindle bore: 40,0 mm turning speeds: 70 - 2000 U/min bed width: 180 mm spindle taper: 55029 D 1-4 taper in tailstock: 3 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 529 kg. range L-W-H: 1730x700x1340 mm Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed bezel - passage diam. max. 60 mm - Live steady rest - passage diam. max. 60 mm - clamping disc 250 mm - Quadruple steel holder - Shaft fixing device - Protective device at steel holder - slip clutch - Longitudinal micrometer stop - coolant device - Pull-out chip tray - Frequency converter - Foot pedal with brake function according to CE - bulkhead - Thread clock - LED machine light - Digital speed display - reducing sleeve  ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3.650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band sa ...

Turning diameter: 630 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: _Unknown / Other TOS - SBL 500 CNC CNC Lathe Ø 630 x 1000 mm C-Axis MACH - ID 6291 Make: TOS Type: SBL 500 CNC YOP: 2001 Max. turning Ø    630 mm X-Axis     320 mm Z-Axis     500 mm Spindle bore      92 mm Speedrange       3000 Rpm Spindle power      17 kW ATC / revolver       12 Speed live tools       4000 Rpm Chip conveyor        yes Dimensions Length     5.500 mm Width       2.200 mm Height      2.100 mm Weight      6.620 kg

: DMC 60 U Hi-Dyn control: Heidenhain TNC 430 x-travel: 600 mm y-travel: 700 mm z-travel: 600 mm : Form AD turning speeds: 0 - 18.000 U/min : : 630x500mit Palettenträger mm pallet changing: 2-fach pallet size:: 2 x 630 x 500 mm : SK40 tool change unit: 60 Plätze : Heidenhain TT 130 : : coolant: : 40 bar chip conveyor: kW : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mm y-travel: 400 mm z-travel: 400 mm control: Heidenhain TNC 310 distance spindle nose and table: min. 100 mm table height over floor: 810 mm table surface area: 400 x 900 mm no. of flutes: 5 je 14 mm work piece dimensions max.: 450 x 400 x 300 mm workpiece weight max.: 350 kg turning speeds:: 9000 U/min power requirement: 7,5 / 8,2 kW spindle cone: ISO 40 DIN 69871 spindle diameter in front bearing: 60 mm tool numbers: 12 diameter of tools max.: 80 mm tool length - max.: 200 mm weight of tools max.: 6 kg tool changing time: 4 sec feed range x y z: 1 - 20 000 mm/min. rapid motion -longitudinal/cross/vertical: 30 m/min operating pressure: 6 bar weight of the machine ca.: 3,46 t dimensions of the machine ca.: 2,14 x 1,58 x 2,61 m CE signed: Electric 400 Volt: Electr. hand wheel: HR 410 Heidenhain chip pan: Lighting og working area: - INDRAMAT axis drives in X, Y, Z and S  ...

Table length: 900 mm Table width: 560 mm Longitudinal X: 600 mm Cross Y: 560 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D DMG MORI - 600V VMC 600 x 560 x 510 TOUCH Slimline 19” MACH - ID 6290 Make: DMG MORI Type: 600V Control: SIEMENS 840D YOP: 2016 X – Travel    600 mm Y – Travel    560 mm Z – Travel    510 mm Table Length      900 mm Table Width       560 mm Table load          400 kg Feed rate X-Axis      30.000 mm Feed rate Y-Axis       30.000 mm Feed rate Z-Axis       30.000 mm Spindle Taper            40 ISO/Bt/Mk Power on spindle       13 kW Speeds / ran ...

cutting diameter: 380 mm saw band length: 4800 mm cutting width: 520 mm : 380 x 380 mm Capacity 90° rectangular: 520 x 380 mm : 300 mm : 300 x 300 mm Capacity 45° rectangular: 300 x 380 mm dimensions of saw-band: 4800 x 34 x 1,1 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 3,67 kW weight of the machine ca.: 1,33 t dimensions of the machine ca.: 2,85 x 0,93 x 1,66 m Product Description Beka-Mak Lineer Sledge horizontal bandsaws have been designed to give a low cost compact and rugged machines.The bow is constructed in heavy gauge steel and mounted two chromed and grinding pillars offer a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models can cope with most types of material.B ...

cutting diameter: 280 mm saw band length: 3120 mm tong feed: 600 mm work height max.: 835 mm dimensions of saw-band: 3120 x 27 x 0,9 mm : 280 mm Capacity 90° rectangular: 330 x 240 mm : 240 x 240 mm : 225 mm : 215 x 215 mm : 230 x 140 mm capacity 60 degrees: round: 140 mm capacity 60 degrees: square: 140 x 130 mm capacity 60 degrees: flat: 140 x 130 mm band speed: 20 - 100 m/min total power requirement: 1,5 kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 2,6 x 1,75 x 1,7 m Fully automatic metal band saw with high cutting accuracy. At this Machine are 90 ° cuts, as well as miter cuts on one side up to 45 °, continuously possible. In the manual workflow up to 30 ° (swivel range 60 °). Workflow: After entering the required number of pieces and the cut length on the control panelthe fully automatic work cycle is started. Basic equipment: - CNC control, storage of up  ...

Table length: 2500 mm Table width: 610 mm Longitudinal X: 2000 mm Cross Y: 610 mm Vertical Z: 560 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Fanuc MACH - ID 6275 Make: Leadwell Type: MV-206 YOP: 2007 X – Travel    2.000 mm Y – Travel       610 mm Z – Travel        560 mm Table Length    2.500 mm Table Width       610 mm Table load         1.000 kg Feed rate X-Axis     30,000 mm Feed rate Y-Axis     30,000 mm Feed rate Z-Axis     15,000 mm Spindle Taper          40 ISO/Bt/Mk Power on spindle     11 kW Speeds / ranges       10.000 Rpm ATC / revolver         24 Co ...

bore capacity in steel (diameter): 50 mm throat: 400 mm bore stroke: 230 mm bore capacity in cast iron: 60 mm threading:: M 36 spindle taper: MT: 4 number of spindles: 9 spindle turning speed range: 54 - 1032 U/min feed steps: 6 spindle feeds:: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U table-size: 550 x 550 mm column diameter: 200 mm weight of the machine ca.: 720 kg dimensions of the machine ca.: 1,2 x 0,6 x 2,6 m STANDARD EQUIPMENT: - Feed with autom. electromech. clutch - Scale with adjustable drilling depth - Digital speed display - threading device - automatic tool ejector - thermomagnetic main switch - Push button for EMERGENCY STOP - Switch for clockwise / anti-clockwise rotation - Switches for high and low engine speeds - fixed table (MF) - Integrated coolant device - machine light - Height-adjustable chip protection disk with microswitch - CE marking OPTION: swiveling table size 480 x 480 m ...

cutting diameter: 560 mm saw band length: 6000 mm cutting width: 750 mm table height: 590 mm : 560 mm Capacity 90° rectangular: 410 x 560 mm : 410 mm : 410 mm Capacity 45° rectangular: 410 x 560 mm speeds steplessly adjustable: 20 - 100 m/min dimensions of saw-band: 6000 x 41 x 1,3 mm total power requirement: 5,22 kW weight of the machine ca.: 2,045 t dimensions of the machine ca.: 3,4 x 1,0 x 2,05 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. ?inverter ?hydromechanic blade tension ?swa ...

centre distance: 8500 mm turning diameter over bed: 1070 mm turning diameter over slide rest: 800 mm spindle bore: 128 mm turning speeds: 1,12 - 1120 U/min Control: Alan Bradley 9-series total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m 3 Shear Bed, Carriage can bypass Steady Rest and Tailstock 6-position Sauter Turret 360 mm Capacity Self Centering Hydraulic Steady Rest 385 mm Capacity Rotaring Work Support (Used for Gun Barrels) 800 mm 4-Jaw Chuck Tailstock Quill diameter Ø 200 mm Tailstock Taper M.T. 6 Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 1750 mm Table width: 800 mm Longitudinal X: 1600 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 48   Positions APC: 0   CNC Brand: Fanuc WELE - TOYODA AA1680 VMC X 1600 x Y 800 x Z 800 mm MACH - ID 6271 Make: WELE Type: TOYODA AA1680 Control: FANUC 18i-MB YOP: 2012 Hours: 3953 X – Travel    1.600 mm Y – Travel       800 mm Z – Travel       800 mm Table Length       1.750 mm Table Width     800 mm Table load         2.000 kg Spindle Taper     40 ISO/Bt/Mk Power on spindle      15 kW Speeds / ranges       12.000 Rpm ATC / revolver        48 Coolant true spindle / Bar        25 Number of controlled ax ...

turning diameter over bed: 1740 mm turning diameter over slide rest: 1300 mm turning length: 16000 mm turning speeds: 4-180 U/min Rapid travel: chip conveyor: digital readout: steady: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12500x5500 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 225 mm Center distance: 1100 mm Spindle bore: 71 mm CNC Brand: Fanuc MACH - ID 6251 Make: NAKAMURA Type: SC-300 L YOP: 2000 Max. turning Ø   350 mm X-Axis     222 mm Z-Axis     1.100 mm Spindle bore     71 mm Speedrange        5000 Rpm Spindle power     36 kW Subspindle speeds       4000 Rpm ATC / revolver      12 Speed live tools     Yes Rpm Speed live tools      3500 Rpm Power live tools       5 kW Control         FANUC Chip conveyor       Yes Dimensions Length      4.200 mm Width        2.100 mm Height       2.300 mm Weight&nb ...

Turning diameter: 350 mm Turning length: 1100 mm Turret positions: 12 CNC Brand: Fanuc MACH - ID 6251 Make: NAKAMURA Type: SC-300 L YOP: 2000 Max. turning Ø   350 mm X-Axis    222 mm Z-Axis    1.100 mm Spindle bore     71 mm Speedrange     5000 Rpm Spindle power     36 kW Subspindle speeds     4000 Rpm ATC / revolver    12 Speed live tools     Yes Rpm Speed live tools     3500 Rpm Power live tools     5 kW Control      FANUC Chip conveyor       Yes Dimensions Length      4.200 mm Width        2.100 mm Height       2.300 mm Weight       4.600 kg

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc 32iMB spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm Manual Guide i The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm Control: Siemens SlimLine Main spindle:: Max. rpm: 12.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 82 / 54 Nm tool taper: SK 40 distance spindle nose and table: 120 - 630 mm work table:: table surface area: 900 x 560 mm max. table load: 600 kg T-slots: 5 work height max.: 850 mm tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8,0 kg feeds:: rapid traverse: 30 m/min feed power: 5 kN feed speeds: max. 30.000 mm/min total power requirement: 32 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 4,0 x 5,0 x 3,0 m Documents: Coolantsystem: elektr. hand wheel: Chip conveyor: CNC - Machiningcenter Vertical DMG MORI - ecoMill 600 V The data for this ad was created with ModulM ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: TNC 426/430 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 15 / 10 kW max. Torque: 130 Nm tool taper: SK 40 swivellable: work table:: table surface area: 1.250 x 700 mm max. table load: ca. 1.000 kg tool magazin:: number of toolpositions: 32 (2x 16) pos. tool taper: SK 40 max. tool diameter: 80 / 130 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8,0 kg feeds:: feed speeds: 1 - 15.000 mm/min rapid traverse: 30 m/min total power requirement: 60 kW weight of the machine ca.: 8,0 t dimensions of the machine ca.: 4,0 x 4,0 x 2,7 m Documents: swarf management system: Coolantsystem: elektr. hand wheel: spindle oil cooler: tool monitoring: CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 T - Swivel-Milling-Head The  ...

Table length: 500 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 570 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Fanuc CNC Model: 18i-M MACH - ID 6240 Make: FAMUP Type: MCP 60 E Control: FANUC 18i-M YOP: 1999 X – Travel    600 mm Y – Travel    400 mm Z – Travel    570 mm Table Length    500 mm Table Width     400 mm Table load        300 kg Feed rate X-Axis     10,000 mm Feed rate Y-Axis      10,000 mm Feed rate Z-Axis      10,000 mm Spindle Taper           ISO 40 ISO/Bt/Mk Power on spindle       11 kW Speeds / ranges         10.000 Rpm ATC / revolver      &nb ...

x-travel: 1.250 mm y-travel: 880 mm z-travel: 800 mm control: TNC 430 Heidenhain Main spindle:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 15 / 10 kW max. Torque: 500 Nm tool taper: SK 40 work table:: table surface area: 1.500 x 1.050 mm max. table load: 2.500 kg number of T-slots: 10 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 60 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8 kg max. total weight: 100 kg feeds:: rapid traverse ( X / Y / Z ): 15 m/min feed speeds: 10.000 mm/min total power requirement: 29 kW weight of the machine ca.: 16,0 t dimensions of the machine ca.: 7,0 x 5,0 x 3,3 m Documents: Chip conveyor: Coolantsystem: Automatic Tool Changer: elektr. hand wheel: CNC - Machining Center Vertical DECKEL MAHO - DM ...

turning diameter: 250 mm turning length: 400 mm control: C 200 / 8 total power requirement: 60 kW weight of the machine ca.: 8,5 t Swing Ø above bed, max. 300 mm Max. turning Ø for chucking work, approx. 250 mm Travel of Slides: Turret 1, X / Z travel 163 / 550 mm Turret 2, X / Z / Y travel 140 / 250 / 260 mm Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5,000 rpm Feed range 0 - 15,000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. Spindle indexing an ...

Turning diameter: 200 mm Turning length: 500 mm Turret positions: 12 CNC Brand: Mitsubishi CNC Model: 900 T Max. turning Ø    200 mm X-Axis       200 mm Z-Axis        500 mm Spindle bore     52 mm Speedrange       4000 Rpm Spindle power         7.5 kW ATC / revolver           12 Control         Mitsubishi 900T Chip conveyor       Yes Dimensions Length       3.000 mm Width        1.500 mm Height       1.800 mm Weight       2.500 kg

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

Table length: 2000 mm Table width: 510 mm Longitudinal X: 1660 mm Cross Y: 510 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Mazatrol CNC Model: M Plus MACH - ID 6107 Make:MAZAK Type:VTC 200 C Control:Mazatrol M Plus YOP:1998 X – Travel     1.660 mm Y – Travel      510 mm Z – Travel      510 mm Table Length      2.000 mm Table Width        510 mm Table load           1.000 kg Feed rate X-Axis        36,000 mm Feed rate Y-Axis         36,000 mm Feed rate Z-Axis          36,000 mm Spindle Taper               40 ISO/Bt/Mk Power on spindle          &n ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

Turning diameter: 750 mm Turning length: 1605 mm Turret positions: 12 CNC Brand: Mazatrol CNC Model: Matrix Nexus MACH - ID     6102 Make:    MAZAK Type :    QTN 350 II - M Control:   Mazatrol Matrix Nexus YOP:      2007 Hours:     9000 Max. turning Ø     750 mm X-Axis      260 mm Z-Axis      1.605 mm Spindle bore       102 mm Speedrange         3300 Rpm Spindle power       30 kW ATC / revolver         12 Speed live tools        4000 Rpm Control           MAZATROL MATRIX NEXUS Chip conveyor          Yes Tool eye          Yes Pi ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

Turning diameter: 670 mm Turning length: 3190 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: Fanuc MACH - ID 6090 Make:DOOSAN Type:PUMA 3100 ULY Control:FANUC YOP:2010 Hours:5800 Max. turning Ø   670 mm X-Axis      293 mm Y-Axis      130 mm Z-Axis       3.190 mm Spindle bore     102 mm Speedrange       2800 Rpm Spindle power      25 kW Speed live tools       5000 Rpm Control          Fanuc Chip conveyor       Yes Tool eye         Yes Pinole taper        Mk 4 Mk Dimensions Length        6.600 mm Width         2.880 mm Height ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

Pallet length: 400 mm Pallet width: 400 mm Longitudinal X: 560 mm Cross Y: 460 mm Vertical Z: 510 mm Number of pallets: 0   Positions ATC: 60   CNC Brand: Mazatrol MACH-id    6026 MAKE         Mazak Japan TYPE          H 400 YOP           1990 SPECIFICATIONS X - Travel        560 mm Y - Travel        460 mm Z - Travel         510 mm B-Axis indexing         360.000 ° Table Length             400 mm Table Width               400 mm Table load                   400 Kg Number of pallets       2 Feed rate X-Axis        &nbs ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

Turning diameter: 680 mm Turning length: 1500 mm Turret positions: 12 CNC Brand: Mazatrol CNC Model: Matrix Nexus MACH-id     6001 MAKE          Mazak TYPE            NEXUS 350 II M YOP               2007 SPECIFICATIONS Max. turning Ø       680 mm X-Axis                    350 mm Z-Axis                     1600 mm Spindle bore             102 mm Speedrange              4500 Rpm Spindle power          30 kW ATC / revolver           12 Speed live tools        4000 Rpm Control    ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

Turning diameter: 650 mm Turning length: 550 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi TF MACH-id     6000 MAKE         SAMSUNG (SMEC) TYPE           SL 2500 A - V YOP              2018 SPECIFICATIONS Max. turning Ø   650 mm X-Axis                245 mm Z-Axis                 600 mm Spindle bore         78 mm Speedrange         4500 Rpm Spindle power        18.5 kW Control             Fanuc Oi TF Chip conveyor           Yes Tool eye          Yes Hours        1000 H Pino ...

max. wheel diameter: 150 mm gear width: 42 mm max. module: 3 min. module: 0,5 total power requirement: 10 kW weight of the machine ca.: 6 t External gears, max. Ø 150 mm (or more) Internal gears, max workpiece Ø, approx. 280 mm Gear width, max. 42 mm Module, max. 0.5 - 3 Length of stroke 0 - 50 mm Adjustment of stroke 0 - 70 mm Distance between shaper spindle and body of machine 250 mm Spindle internal table, approx. 45 mm Strokes, roughing / finishing 450 - 1,250 / 2,500 / min Table Ø 250 mm Table bore 100 mm Distance between table and shaper head, approx. 320 mm Axial travel of workpiece slide, approx. 285 mm Feed range, tooth depth 0.01 - 0.063 mm/stroke Rotary feed 0.125 - 3,150 mm/stroke Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight 6,000 kg Accessories / Special Features Built-in hydrostatic straight guide. Built-in raiser plate for raising the shaper head 130 m ...

x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 24 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m M I K R O N (Switzerland) CNC Controlled Universal Milling Machine with Tool Changer Model WF 54 VH CNC Year 1991 Serial No. 5110302 ________________________________________________________ Table travel, X axis, longitudinal 710 mm Table travel, Z axis, vertical 500 mm Milling head travel, Y axis, cross 500 mm Mounting height below vertical spindle, approx. 600 mm NC rotary table 800 mm Resolution of rotary table, C axis 0.001 ° Spindle taper SK 40 Spindle speeds, 3 steps, infinitely variable 10 - 6,300 rpm Feeds, XYZ 2 - 4,000 mm/min Quickfeed, XY 10,000 mm/min Quickfeed, Z 8,000 mm/min Spindle drive, approx. 15 kW Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 7,000 kg Accessories / Special Feat ...

Turning diameter: 903 mm Turning length: 1000 mm Turret positions: 0 CNC Brand: Okuma CNC Model: OSP 700 L MACH-id     5585 MAKE          OKUMA TYPE             LU 45 M YOP               2001 SPECIFICATIONS Max. turning  Ø     903 mm X-Axis         440 mm Z-Axis         1090 mm Spindle bore      110 mm Speedrange       2800 Rpm Spindle power         45 kW Speed live tools        2000 Rpm Control            OSP700L Chip conveyoryes         Pinole taper    5 Mk Stroke pinole          170 mm Quill Ø  &nb ...

x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm total power requirement: 25 kW weight of the machine ca.: 11,5 t M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 Partially reconditioned in Year 2007 by MMD Company _____________________________________________________________ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axi ...

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

Table length: 2200 mm Table width: 1000 mm Longitudinal X: 2020 mm Cross Y: 1000 mm Vertical Z: 850 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Siemens MACH-id     5550 MAKE         MACR - Macro Micro Taiwan TYPE            Acceler 2020 YOP               2014 SPECIFICATIONS X - Travel         2020 mm Y - Travel         1000 mm Z - Travel          850 mm Table Length      2200 mm Table Width        1000 mm Table load            4200 Kg Feed rate X-Axis       16.000 mm/min. Feed rate Y-Axis        16.000 mm/min. Feed rate Z-Axis        16.000 mm/m ...

x-travel: 800 mm y-travel: 630 mm z-travel: 560 mm total power requirement: 60 kW weight of the machine ca.: 12.5 t dimensions of the machine ca.: m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _______________________________________________________ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features 5-Axis SIEMENS CNC Path Control, Mode ...

cutting diameter: 320 mm saw band length: 4670 mm cutting width: 580 mm total power requirement: 7,4 kW weight of the machine ca.: 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. Infinitely variable settings of sawing feed with display of the current cutting speed. Workpiece counter: Number of workpieces can be preset. Selection swi ...

Table length: 2000 mm Table width: 760 mm Longitudinal X: 1740 mm Cross Y: 760 mm Vertical Z: 660 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Mazatrol MACH-id     5371 MAKE          MAZAK TYPE            VTC 300 C - II YOP              2006 SPECIFICATIONS X - Travel          1740 mm Y - Travel            760 mm Z - Travel             660 mm Table Length        2000 mm Table Width         760 mm Table load             1400 Kg Feed rate X-Axis       36000 mm/min. Feed rate Y-Axis        36000 mm/min. Feed rate Z-Axis        ...

Table length: 450 mm Table width: 0 mm Longitudinal X: 700 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 16   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: DMG MACH-id     5320 MAKE         DMG Mori TYPE           DMU 40 monoBLOCK YOP             2008 SPECIFICATIONS X - Trave       l700 mm Y - Travel       400 mm Z - Travel        400 mm A - Axis      360 ° B - Axis   + 30 / - 120 ° Table load           250 Kg Table Ø      450 mm Feed rate X-Axis      50.000 mm/min. Feed rate Y-Axis       50.000 mm/min. Feed rate Z-Axis        50.000 mm/min. Feed r ...