straw 21 used for sale

Slip-on reamer, right-hand cutting POLAND 62 H7 SS DIN 219 Nominal diameter: Ø 62 mm form A ( straight grooves ) Number of grooves: 12 Cutting edge length: 60 mm with taper bore: Ø 29,5 / 31.5 mm, length: 69 mm transverse groove ( according to DIN 138 ) : 11 x 10 mm ( width x height ) Total length: 80 mm New, preserved ! Dimensions ( packaging ): 90 x 75 x 85 mm

Slip-on reamer, right-hand cutting POLAND 70 H8 SS DIN 219 Nominal diameter: Ø 70 mm Form A ( straight grooves ) Number of grooves: 16 Cutting edge length: 62 mm with taper bore: Ø 37 / 70 mm, length: 77 mm transverse groove ( according to DIN 138 ) : 13 x 12 mm ( width x height ) Total length: 90 mm New, preserved ! Dimensions ( packaging ): 85 x 80 x 95 mm

Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,486 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...

Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,568 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.75 KW -Speed range: 39 to 213 rpm -Motor: adjustable -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 450/410/H190 mm -Weight: 23 kg

Combination element, rod seal, 11 pieces ROBIX, ZITEC 12x22x10.7 AU NIPSL 94 AU 21200 inner diameter: Ø 12 mm outer diameter: Ø 22 mm height: 10.7 mm Other quantities on request ! New ! Dimensions ( packaging ): 25 x 25 x 120 mm

Combination element, rod seal, 9 pieces ROBIX, ZITEC 16x26x10.7 AU NIPSL 94 AU 21200 Inner diameter: Ø 16 mm outer diameter: Ø 26 mm height: 10.7 mm Other quantities on request ! New ! Dimensions ( packaging ): 25 x 25 x 120 mm

Combination element, rod seal, 9 pieces ROBIX, ZITEC 23x35x10.7 AU NIPSL 94 AU 21200 Inner diameter: Ø 23 mm outer diameter: Ø 35 mm height: 10.7 mm Other quantities on request ! New ! Dimensions ( packaging ): 40 x 40 x 120 mm

Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website

Pressure switch HYDROPA-HYDROSTAR TKF 2149 pressure range: 0 - 160 bar pressure connection: G 1/2( inch ) 2 changeover used, repaired, checked ! dimensions ( pressure switch ): 150 x 121 x 67 mm dimensions ( packaging ): 165 x 135 x 75 mm

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Remark: the lead screw is missing (for thread cutting) -Manufacturer: Arad Elite, type ES 710 -Distribution: Andras Plum -Turning length: 2120 mm -Swivel Ø over bed: 780 mm -Rotating Ø without bed: 1000 mm -Rotating Ø over support: 400 mm -Spindle bore: Ø 83 mm -Spindle speeds: 8 - 1250 rpm -Three-jaw chuck: Ø 400 mm -Quick change: Multifix steel holder -Tailstock mount: MK5 -Drive motor: 18.5 kW -Dimensions: 4000/1450/H1430 mm -Weight: 4900kg

adjustable gear motor, variable speed gear motor, electric motor, synchronous worm drive -Ceds Duradrive: Type DAPE-WH003-0250.04633.00 -Motor power: 0.18 kW -Speed: 213 rpm -Hollow shaft: Ø 14 x 75 mm -Construction: B3 -Dimensions: 270/125/H190 mm -Weight: 6 kg

Gear motor, electric motor -Motor comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 215 rpm -Power: 0.3 kW -Protection class: IP 20 -Number: 6x available -Price: per piece -Weight: 6.5 kg

Gear motor, electric motor -Speed: 218 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: -Dimensions: 445/210/H175 mm -Weight: 19.6 kg

Gear motor, electric motor, three-phase motor -Speed: 24/210 rpm -Power: 0.04/0.55 kW -Construction: B3 -Diameter shaft: 24 mm -Protection class: IP 44 -Brake: 220 V -Fan motor: 380 V -Dimensions: 675/200/H210 mm -Weight: 31 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 190 x 45 mm -Total length: 2125 mm -Lengths: 20/25/30/35/40/45/50/55/60/65/70/75/80/85/90/100/200/500/500 mm -Weight: 84 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear unit SEW type: R40 -Manufacturer motor SEW type: DF12DT71D-4 -Motor power: 0.37 kW -Speed range: 43-215 rpm -Motor: adjustable -height of the shaft axis: 90 mm -Drive shaft: Ø 25 mm -Construction: B3 -Number: 1 piece of motors available -Price: per piece -Dimensions: 590/280/H165 mm -Weight: 28 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.55 kW -Speed range: 64-218 rpm -Motor: adjustable -Drive shaft: Ø 19 mm -Construction: B3/B14 -Number: 1 piece of motors available -Price: per piece -Dimensions: 570/180/H270 mm -Weight: 20 kg

variable speed geared motor, variable speed geared motor, electric motor -Motor power: 0.75 kW -Speed range: 40 to 210 rpm -Motor: adjustable -Construction: B3 -Height shaft center : 160 mm -Diameter shaft: 28 mm -Protection class: IP 55 -Dimensions: 520/220/H300 mm -Weight: 34kg

Gear motor, electric motor, Electric gear motor -Speed: 216 rpm -Power: 0.33 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 33 -Dimensions: 385/220/H200 mm -Weight: 20.5 kg

Three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated -Power: 1.1 - 5.5 kW -Speed: 420 - 2100 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 21 -Dimensions: 860/430/H480 mm -Weight: 244 kg

Gear motor, electric motor -Speed: 211 rpm -Power: 0.25 kW -Construction: B5 -Diameter hollow shaft: Ø 22 mm -IP protection -Dimensions: 335/140/H190 mm -Weight: 9 kg

Sealing ring, comb-profiled, comb profile gasket SIEMENS B 214x324 0080250216 Seal thickness: 5 mm diameter ( outside / inside ): Ø 324 / 214 mm Material: Carrier material: stainless steel, support: graphite New ! Dimensions ( packaging ): 350 x 350 x 10 mm

Power chuck, 3-jaw chuck, three-jaw chuck, wedge hook chuck KITAGAWA B-208 Outer diameter: Ø 210 mm height without jaws: 108 mm passage: Ø 52 mm speed: max. 5000 rpm flange diameter ( outside ): Ø 170 mm flange diameter ( inside ): Ø 82 / 79,5 mm x 10 mm ( conical ) bolt circle diameter: Ø 134 mm 6x Threaded hole: M12 x 1.5 Depth: 25 mm jaws individually adjustable by toothing ! New ! Dimensions ( lathe chuck ): 210 x 210 x 150 mm Dimensions (packaging): 290 x 230 x 180 mm

Face milling cutter, slip-on milling cutter, milling head GARANT 21380-160 SK50 Diameter: 160 mm Number of cutting edges: 9 Diameter base body : 180 mm Height: 50 mm with HAIMER 50 milling mandrel.350.40 Ø 40 x 50 used, tested ! Dimensions ( cutter ): Ø 180 x 215 mm

Solenoid valve, directional control valve NORGREN 2102250130002400 0000000.1300 max. 15 bar G1/2 ( inch ) Installation length: 90 mm 24 V DC, 20 Watt New, with underlays ! Dimensions ( valve ): 215 x 110 x 100 mm Dimensions ( packaging ): 250 x 150 x 120 mm

Probe WAYGATE TECHNOLOGIES KRAUTKRÄMER NDT DA 212 B13 Diameter: Ø 8 mm Length: 26 mm approx. 1.3 m Connecting cable New, with documents ! Dimensions (packaging): 140 x 120 x 65 mm

Folding machine FASTI 212-50-2 b.: 1983 control type: CNC sheet width: 5040 mm Sheet thickness: 2 mm Total power requirement: 12 kW Working width: 5000 mm Control: Fasti Matik Upper beam stroke: 500 mm Upper beam and bending beam: 80 mm not tested used ! Dimensions: 6200 x 1300 x 1900 mm cabinet dimensions: 1000 x 850 x 1450 mm

CompAir air compressor, type: L01-10 349027/2180, number: 14093803829900901, year of construction: 2004, dimensions: 550 mm x 700 mm x 1000 mm.

Hydraulic power unit MTS 507.05 with control cabinet Pmax: 210bar Qmax: 40L Rated Current: 50A Year unknown, AEG Motor Water Return Cooler

S/s tank, volume: 10m3, dimensions: Ø 2100 mm x 3300 mm.

Compact control cabinet, terminal box, 1-door RITTAL AE 1050 500 500 x 500 x 215 mm pre-drilled ! Material: steel, painted used, tested ! Dimensions: 500 x 500 x 215 mm

Submersible pump, Coolant pump, Emulsion pump, BRINKMANN TH 618A590-MVX+215 Q: 80 l/min H: 114 m immersion depth: 590 mm pump foot: Ø 140 mm pump flange: Ø 180 mm Motor: 2,6 kW 2850 rpm 220 - 240 / 380 - 420 V 3AC 50 Hz IP55F New ! Dimensions: 880 x 260 x 185 mm

HST Maschinenbau GmbH homogenizer, type: HL 3-210T, serial number: 13DA242, year of construction: 2013, 55 kW, maximum pressure: 210 bar, weight: 3000 kg, capacity: 8000 liter per hour, dimensions: 1070 mm x 2000 mm x 1340 mm.

Vemag mobile flexible sausage line, model: FSL 210, number: 2100022, year of construction: 2011, 220-240 V / 400 - 460 V / 575 V, 3 Ph, 50/60 Hz, 4.9 kW, total dimensions: 1900 mm x 850 mm x 1300 mm.

We sell 10 x Raritan DKX3 216 6 x Raritan DSXA 16 DL 1 x Raritan DKX3 032 2 x Raritan DKX3 832 50 x Raritan Dongles In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete  ...

Clamp force: 750kN, heating output: 11kW, weight: 3t.

Pallet rack, heavy-duty rack, high rack, plug-in rack, storage rack stand -Form 1: Number: 4x depth 750 mm height 2100 mm -Form 2: Number: 2x depth 600 mm height 2100 mm -Price: complete -Scope of delivery: without crossbeams -Total weight: 60 kg

Braking resistor, charging resistor, damping resistor, filter resistor -BW 215 -150 ohms -Item no.: 8254354 -600 W -Number: 2x resistors available -Price: per piece -Weight: 5 kg

Key data: 850 kN

Arburg 320M 850-210-210 / 2K machine Year of construction: 1992 Injection unit: Screw diameter: 25 mm Spray weight: 62 g Injection pressure: 2950 bar Dosing volume: 73 ccm Clamping unit: Clamping force: 85 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Euromap 12 Robot Interface Air Valve x 7 Hydraulic core pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 25 mm Metrics: Weight: 3010 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 22 kW Heating capacity: 8 kW Total power: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Ł ...

Technical data baler: Manufacturer BOA Type 2100 75 (8) PR SD Year of manufacture 1995 Operating hours 9,163 hours, as of June 23 Pressing force main press 90 t Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Filling volume / pressing cycle 2.4 m³ Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 2 x 37 kW Connected load 92 kW Tying system 4-fold vertical, fully automatic, prepared for 8-fold cross binding Throughput rates for quality: B12 / B19 approx. 10 t/hour, bale weight up to 1200 kg/bale Foil approx. 10 t/hour, bale weight up to 800 kg/bale Hydraulic oil tank capacity 1,500 L PLC control system Siemens SIMATIC S7-1500, renewal in 2020 Press dimensions built up with hopper 15,000 x 6,000 x 6,500 mm (l x w x h) Transport dimensions 12,800 x 2,500 x 3,100 mm (l x w x h) Machine weight press approx. 30 t Noise level

Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.

Type: 21846, Y.O.M.: 1982, 0.2 kW, U-Trog gutter, top open, magnetic drive: EVS 8, infinitely adjustable, mounted on base, separates round from angular units.

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

1 x Smit 660mm dia x 2100mm wide two roll mill, Rebuilt 2005, manual nip adjustment, Lunn type safety bars, Back roll surface fluted, Front roll smooth finish. Bush type bearings with flood lubrication, compact \Jahnel\ right angle drive gearbox. with 180KW DC variable speed motor and controls. Strip knives to front roll. Heavy duty 2 part bedplate. Extra Information: Front roll 29 teeth Back (fluted roll) 32 teeth Friction ratio 1:1.1 Motor 180kW DC variable speed, 1300rpm, Gear box ratio 1:9.8 Bullgear 122 teeth, Pinion gear 18 teeth (Ratio 1:6.777) Therefore approx roll speeds as follows: Input motor speed 1300rpm: Front roll 21.53 rpm Back (fluted) roll 19.6 rpm

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

Kuka KR210-2 Series2000 Built in 2002 Payload 210kg Weight 1245kg Range 2700mm Connection line 7m Control KRC2 Built in 2002 Weight 185kg Software 4.1.5 SP08 ..

; ready