straightening hydraulic press used for sale

pressure:200 t distance between columns:2900 mm stroke:800 mm dimensions of the machine ca.:3300 x 2700 x 3100 mm Table dimensions:2500 x 2000 mm :4000 mm :33 mm/sec :33 mm/sec distance table - lower edge of ram:1100 mm table height over floor:750 mm :2300 mm return capacity:25 t total power requirement:15 kW Oil Cooling:1 kW stroke speed:18 mm/sec down speed:2 - 10 mm/sec :200 l table plate:100 mm distance between columns:2400 mm open height:1000 mm weight:9 t Table Height:750 mm :34 Lt./min. Impact leper extension removable (200 mm long):550 ? Table top flattened, with or without T-slots:7900 ?

pressure:200 t distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

pressure:400 t distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec :67 Lt./min. Total weight, approx.:26 t

pressure capacity max.:50 t

pressure capacity max.:25 t

Single column hydraulic press, straightening press, punching bar ECKOLD press frame with hydraulic cylinder, mobile press, punching unit type RSD 1500 - 125 Masch. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. Projection 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface 125 mm Installation height (tappet to table) max. 265 mm Table height above corridor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit tappet surface with 4 threads M16 and 20 mm guide groove, in the middle a centering hole 15 mm- 1 piece high-pressure hydraulic hose with male thread M30x1.5 mm , Hose length 4 meters - 1 piece High pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg good condition; used

Hydraulic straightening press make EITEL type RPT 100 TYear of construction 1978Technical specifications:Press force: 100 tWorkpiece height: 200 mmWorkpiece width: 210 mmWorkpiece length: 12000 mmRam speed: 1.5 m / min.With- hand control- Roller conveyor feed with support table 7000 mm- Roller table discharge table 7000 mm- Pneumatic material discharge device- Standing desk- Spare Partsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic straightening press make MAE type S 16 RHTechnical specifications:Press force: 16 tRetraction force: 57.7 kNWorking pressure: 204 barRam speed, down: 25 mm/sRam speed, up: 68 mm/sStroke: 200mmInstallation height: 550 mmProjection: 190 mmTable depth: 320 mmTable width: 480 mmTable height: 750 mmTank volume: 120 lPump flow rate: 11.6 l (min.Tappet bore: 32mmDrive power: 5.5 kWExternal dimensions L x W x H: 1400 x 700 x 2070 mmweight approx.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure:150 t total power requirement:20 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:8800 x 1800 x 2200 mm Pressure adjustment via rotary control infinitely adjustable:15-150 t Cylinder diameter:100 mm Press speed (infinitely variable via joystick):0-9,9 mm/s servo motor:2 kW Cooling unit:1 kW Oil tank (under table):350 l Oil cooling (electric):1 kW (max)

pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Rail press ARNOLD, with foerder rollers

Hydr. Shaft straightening machine / shaft straightening press make SAUER & Sohn Dieburg type DR 15/4000 NAStraightening force at 6 bar air pressure: 15 tfor workpiece length up to: 4000 mmWorkpiece diameter: 80 mmWorkpiece cross-section flat max.: 5000 mm2Center shafts max.: 2000 mm2unzentr. Shafts max.: 2000 mm2Stroke of the straightening punch: 30 mmWeight: 800 kgOutside dimensions approx.: 4300 x 700 x 1500 mmWith- a lot of accessoriesused, good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

horizontal hydraulic straightening and bending press make KUNKEL type P 32Year of construction 1993Technical specifications:Maximum working pressure: 32 tinfinitely variable from: 0 - 32 tStroke of the pressure tools: 200 mmClear width pressure tool - anvil: 300 mmCasters:4including 2 rollers on extendable barswith outer distance: 3000 mmExternal dimensions approx. H x W x D: 1160 x 1200 x 1400 mmDrive power: 5.5 kWPump capacity: 280 kg/cm2Weight approx.: 1400 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

pressure: 3 t throat: 0 mm stroke: 200 mm total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 2500 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t working feed: 9 / 14 mm/sec stroke: 600 mm column daylight: 1550 mm : 600 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 3000 mm tank capacity: l feed speeds: 9 mm/sec return speed: 14 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 35 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t distance between columns: 1500 mm stroke: 380 mm working feed: 2,47 mm/sec : 700 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 1740 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar table-size: 1740 x 1396 mm total power requirement: 2,2 kW weight of the machine ca.: 2060 kg dimensions of the machine ca.: 1,74 x 2,07 x 2,04 m This 100 ton straightening press has a manually movable portal and is exclusively made in the Netherlands. Thanks to the movable portal and cylinder you can easily reach every point of the ‘to be pressed’ surface. The design of this portal press makes it possible to place heavy material on the large working table with a crane and to slide the portal over the material when the pressing starts. The quality of these hydraulic straightening presses is very high. Furthermore, the hydraulic unit is equ ...

pressure: 50 t distance between columns: 2700 mm stroke: 800 mm measuring system: Absolutwertgeber control: Siemens Simatic S7 400 table length: 2500 mm table width: 1600 mm : 150 table height: 1320 mm work height max.: 1580 mm : 800 total power requirement: 15 kW Tool clamping upper and lower part: screwed manual tool change The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t distance between columns: 2560 mm stroke: 400 mm working feed: 3,8 mm/sec piston stroke: 300 mm : 700 mm adjustment of press crosshead: 2000 mm slide adjustment -horizontal: 3000 mm tank capacity: min 30 l feed speeds: 9 mm/min pressing speed: 2 mm/sec return speed: 15 mm/sec total power requirement: 10 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 3,5 x 3,05 x 2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t distance between columns: 1100 mm stroke: 380 mm working feed: 2,47 mm/sec : 950 adjustment of press crosshead: 1100 mm slide adjustment -horizontal: 2150 mm tank capacity: min 30 l feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar table-size: 1740 x 996 mm total power requirement: 2,2 kW weight of the machine ca.: 1,65 t dimensions of the machine ca.: 1,1 x 0,7 x 0,72 m This Profi Press portal press with a manually movable portal is made in the Netherlands and has a 160 tons capacity. The quality of these hydraulic portal presses is very high and the operation of the press is similar to the operation of our well-known motorised workshop presses (they are made in the same factory). Please find the technical specifications of this type of Profi Press below and do not hesitate to request a free quotation or to contact us for any further information. ...

pressure: 300 t stroke: 450 mm throat: 450 mm work speed: 2,1 m/min ajustment speed: 10 mm/sec return speed: 16 mm/sec pressure: 320 bar diameter of piston: 60 mm opening stroke: 900 mm table-size: hinten / back 2500 x 750 mm Table dimensions: Main 750 x 750 mm total power requirement: 7,5 kW weight of the machine ca.: 15,3 t dimensions of the machine ca.: 3,35 x 2,5 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 t distance between columns: 2065 mm stroke: 400 mm working feed: 3,8 mm/sec piston stroke: 300 mm : 700 mm adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 2500 mm tank capacity: min 30 l feed speeds: 13 mm/sec pressing speed: 2,7 mm/sec return speed: 24 mm/sec total power requirement: 10 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 3,5 x 3,05 x 2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t stroke: 450 mm throat: 350 mm work speed: 2 m/min ajustment speed: 10 mm/sec return speed: 16 mm/sec pressure: 320 bar diameter of piston: 50 mm opening stroke: 700 mm table-size: hinten / back 2000 x 500 mm Table dimensions: Main500 x 500 mm total power requirement: 4 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: 2,95 x 2,0 x 850 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 t stroke: 450 mm throat: 375 mm work speed: 2,2 m/min ajustment speed: 10 mm/sec return speed: 18 mm/sec pressure: 320 bar diameter of piston: 60 mm opening stroke: 800 mm table-size: hinten / back 2500 x 600 mm Table dimensions: Main 600 x 600 mm total power requirement: 5,5 kW weight of the machine ca.: 12,15 t dimensions of the machine ca.: 3,25 x 2,5 x 0,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t distance between columns: 1565 mm stroke: 450 mm : 700 mm adjustment of press crosshead: 1100 mm slide adjustment -horizontal: 2150 mm feed speeds: 9,0 mm/sec pressing speed: 2,0 mm/sec return speed: 15,4 mm/sec Pressure power: 320 bar table-size: 1550 x 3000 mm table height: 600 mm total power requirement: 15,4 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3250 x 2500 x 2550 m This 150 ton gantry press is eminently suitable for straightening large and heavy structures and sheets. These Profi Press portal presses have a movable frame and a movable cylinder. Thanks to these features you have an easy access the different pressing and straightening points of the material. The longitudinal displacement of the frame is carried out by a frequency inverter and cogged belt to ensure precise slides. The lateral movement of the cylinder / headstock is motorised ...

pressure: 160 t distance between columns: 1100 / 1500 (Option) mm stroke: 400 mm working feed: 2,4 mm/sec : 700 slide adjustment -horizontal: 2150 mm tank capacity: min 30 l feed speeds: 7,48 mm/sec pressing speed: 2,4 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar table-size: 1740 x 996 mm total power requirement: 3 kW weight of the machine ca.: 2185 t dimensions of the machine ca.: 1,74 x 1,73 x 2,185 m This Profi Press portal press with a manually movable portal is made in the Netherlands and has a 160 tons capacity. The quality of these hydraulic portal presses is very high and the operation of the press is similar to the operation of our well-known motorised workshop presses (they are made in the same factory). Please find the technical specifications of this type of Profi Press below and do not hesitate to request a free quotation or to contact us for any further informat ...

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1400 mm Table width: 250 mm Shearing force: 400 kN Ram feed: 1.8 m/min Total stroke: 150 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 7.5 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1345 mm Width: 720 mm Height: 2450 mm

Pressing force: 250kN, max. stroke: 160mm, working speed: 30mm, connected load: 4.7kVA, weight: 2.2t.

Frame Straightening Press / Body Sealer Fabr. GILETTEType and year unknownTotal length approx: 3,0 mmobileWith- Hand hydraulic- a lot of accessories, chains, fasteners etc.according to enclosed phototsPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic horizontal straightening machine make SCHULZ type HPR / PR 160 MPMachine -No: 54471 Year 1977Max. Printing capacity: 160 tOperating pressure: 280 barRam stroke: 650 mmPlunger surface: 1000 x 200 mmTable surface: 1000 x 650 mmDrive power: 55 kWWeight approx: 10tWith- Press pressure setting- clamping pressure adjustment- 2 two-handed outlets movable- adjustable / limited stroke lengthsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical straightening press make EITEL type RP 25Technical specifications:Press force: 25 tDimensions (LxWxH) approx.: 1400 x 900 x 2100 mmWeight approx: 2000 kgOil filling: 150 lWith- Straightening harness- hydraulic control device- Extension tables 3000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening press make EITEL type P 25 AMachine -No: 10991, built around 1965Technical specifications:Press force: 25 tSlide speed dev / up: 3.0 m / min. / 10 m / min.Ram stroke: 400 mmInstallation height: 600 mmThroat: 250 mmDrive power: 3.0 kWExternal dimensions L x W x H: 1300 x 1400 x 2300 mmwith- lightingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening press make EITEL type P 25 AMachine -No: 11351, built in 1965Technical specifications:Press force: 25 tRam speed dev / up: 3.0 m / min. / 10 m / min.Ram stroke: 400 mmInstallation height: 600 mmThroat: 250 mmDrive power: 3.0 kWExternal dimensions L x W x H: 1300 x 1400 x 2300 mmwith- Emergency switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 160 t distance between columns: 1500 mm stroke: 400 mm working feed: 2,4 mm/sec : 700 slide adjustment -horizontal: 2150 mm tank capacity: min 30 l feed speeds: 7,48 mm/sec pressing speed: 2,4 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar table-size: 1740 x 996 mm total power requirement: 3 kW weight of the machine ca.: 2,65 t dimensions of the machine ca.: 1,74 x 1,73 x 2,185 m This Profi Press portal press with a manually movable portal is made in the Netherlands and has a 160 tons capacity. The quality of these hydraulic portal presses is very high and the operation of the press is similar to the operation of our well-known motorised workshop presses (they are made in the same factory). Please find the technical specifications of this type of Profi Press below and do not hesitate to request a free quotation or to contact us for any further information. The data  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 22900 € : 467.16 € : 40 to : 500 mm : 700x500 mm : 600 mm : 26 mm/s : 9 mm/s : 4 kW : 1400 mm : 900 mm : 2200 mm : 1300 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 25000 € : 510 € : 70 to : 500 mm : 700x500 mm : 600 mm : 25 mm/s : 5 mm/s : 4 kW : 1400 mm : 900 mm : 2250 mm : 1900 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 31400 € : 634.28 € : 100 to : 500 mm : 800x600 mm : 615 mm : 26 mm/s : 4 mm/s : 4 kW : 1600 mm : 900 mm : 2300 mm : 3100 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 43200 € : 872.64 € : 150 to : 500 mm : 800x600 mm : 630 mm : 22 mm/s : 3 mm/s : 4 kW : 1800 mm : 1200 mm : 2400 mm : 4500 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 55200 € : 1104 € : 200 to : 500 mm : 1000x600 mm : 640 mm : 21 mm/s : 2 mm/s : 5.5 kW : 1800 mm : 1300 mm : 2500 mm : 6400 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 t

Bussmann Press HPK 100 Machine number: M 36 65 Offer here a Bussmann frame press on type 100 /5 The press ran until the last minute and only formed sheet metal It has many safety-related devices installed Has been scrapped due to new acquisition from ongoing operation Pressing force: 100t Retraction force: max. 14t Injection piston pressing force: max. 40t Lower piston stroke: 200 mm Stroke upper piston: max. 400 mm Table width / installation width: 650 mm Table depth / installation depth: 650 mm

pressure: 800 t distance between columns: . mm stroke: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 15 t, 66 mm

Burger Press D07 Length 1.20 m Width 0.60 m Height 1.70 m 2 Hand control Switch to foot control 1 press die

combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Flat iron bender: hydraulic profile bending machine -Pressure capacity: 140 Ton. -Stroke cylinder: 455 mm -Counter bearing max width: 1250 mm -Support rollers: height adjustable 250 mm -Dimension: 2060/3735/H1620 mm -Weight: 8300kg

Description: Press force: 35 tons . Max. pressing force: 35 to, stroke: 250 mm, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,250 mm

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good

wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm output: 400/min. complete with ciller and motorized decoiler; good