british flag
Resale Logo

still used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used and reconditioned Diesel and Gas Generators  ALL POWER SOLUTION  http://www.allpowersolution.com 
banner logo
start page > keywords still > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125828718 1300

SULFURIC ACID PLANT 1500 MT New Surplus for sale
other machines


Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate con ...
new machine
 
Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus
The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate controlled warehouse and is being kept as per manufactures guidelines. Brief outline of some of the equipment included, 23 MW GE Thermodyn Condensing Steam Turbine Generator, Converter, Hot Inter Pass Heat Exchanger, Cold Inter Pass Heat Exchanger, Steam injection vessel, Duct transition pieces, Main Blower, Air Inlet Filter, Drying Tower (DT), DT Mist Eliminators, DT Acid Distributor System, DT Support for Packing, HRS Steam Separator, Steam Injection Exhaust Head, Heat recovery Tower(HRT), HRT Mist Eliminators Demister, HRT Acid Distributor System (stage 2)HRT, Support for Packing (stage 2), HRT Acid Distributor System (stage 1), HRT Support for Packing (stage 1), Ceramic Insulation Block, Final Absorbing Tower (FAT), FAT Mist Eliminators Demister, FAT Acid Distributor System, FAT Support for Packing, Common Acid Pump Tank, HRS Boiler Package, HRS Blowdown Sample Cooler, HRS Steam Sample Cooler, HRS Blowdown Tank, HRS Boiler ailable due to a cancelled project., HRS Blowdown Tank Exhaust Head, HRS Acid Sample Coolers, HRS Acid Sample Enclosure, HRT Pump boot, HRS Diluter, HRS Heater, HRS Preheater, Liquid Effluent Pump, Steam Injection Sparger, Main Boiler
The Sulfuric Acid Plant is designed to be fed by solid sulfur. The equipment related to handling the solid sulfur was never purchased. However the engineering studies & design were completed and is ready to be requisitioned directly from the supplier if the new owner wishes to make the purchase. The product handled by conveyor is solid Sulphur, with the following characteristics:
Type Dry bulk solid powder
Sulphur > 99.5 % w/w
Inorganic ash < 0.4 % w/w
Carbon < 0.1 % w/w

All the equipment is new and was never installed and therefore, the Process Technology Licence associated with the plant has never been used and can be transferred to the new owner at a very affordable cost.
The guarantee can be provided to the new owner of the plant once the basic engineering of adapting the plant to the new site conditions have been completed.
The new owner of the plant will not have any restrictions on the engineering company they choose to complete the design, construction and commissioning of this plant.
new
Price  
  US   request
125828722 109

MITSUBISHI CX20 for sale
E2475


State: Machine still runing by customer X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece ...
used machine
 
State: Machine still runing by customer

X-Axis Travel (mm):
X-Axis Travel (mm):
X-Axis Travel (mm):
Worktank length:
Worktank width:
Worktank height:
Max. workpiece length:
Max. workpiece width:
Max. workpiece height:
Max. workpiece weight:
Taper angle/height:
Automatic Wire Feeding:
Length x width x height:
Weight (kg):
Worked power hours:

The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.
1976
Price  
  IT   request
125822866 2500

STILL FM14 for sale
Reach trucks still FM14


elapsed. Hours of operation: 25.742, serial number: 1855 0 53128, year of construction: 1997, capacity: 1, 400 kg, empty weight: 2,000 kg

 
elapsed. Hours of operation: 25.742, serial number: 1855 0 53128, year of construction: 1997, capacity: 1, 400 kg, empty weight: 2,000 kg
 
Price  
    request
125828723 109

SODICK AQ 325 L for sale
E2475


State: Machine still runing by customer
used machine
 
State: Machine still runing by customer
2001
Price  
  FR   request
125809047 404

SCHUT Sprinter S1000 for sale
Folding box cartoning machines


Sprinter S1000 carton sealer Schut Systems offers top loading carton sealers in various speeds that can be integrated in an existing packaging line. The machine closes the carton made of duplex or corrugated cardboard a ...

 
Sprinter S1000 carton sealer
Schut Systems offers top loading carton sealers in various speeds that can be integrated in an existing packaging line. The machine closes the carton made of duplex or corrugated cardboard and seals it with hotmelt.
This particular line is still in production till week 3 of June.
Very good working condition.
This machine comes complete with automatic box-unfolding unit. From there collected on a conveyor belt.
On the conveyor it allows to put product inside the unfolded box. The belt automatically brings the box with the product to the Sprinter that glues and closes the box.
It can only be offered as a complete line with the unfolding machine, belt, sprinter with glue unit.
Installation is negotiable
 
Price  
  NL   request
125828724 109

FANUC ALPHA 1iA for sale
E2475


MACHINE BY CUSTOMER STILL WORKING
used machine
 
MACHINE BY CUSTOMER STILL WORKING
1999
Price  
  CH   request
125780322 204

BUETFERING Vega 111 E for sale
Wide belt grinding machines


Calibration and fine grinding machine, wide belt sander Vega Bütfering 111 E (industrial series) A video of the current machine can be sent on request. Suitable ideal sanding machine for interior design companies, ...
used machine
 
Calibration and fine grinding machine, wide belt sander Vega Bütfering 111 E (industrial series)

A video of the current machine can be sent on request.

Suitable ideal sanding machine for interior design companies, also for intermediate lacquer sanding
Binding machine with combined unit and an electronic limb pressure bar 50 mm segment width, Polumschaltbarer driving motor 15 kW 3-speed 4.5, 9 and 18 m/s
Belt feed continuously adjustable from 2.5 to 13 m / min
Feed belt is still very handy and only minor damage, it lacks a few pimples
Max grinding width 1100 mm
Workpiece height approx. 4 to 160 mm
Sanding belt size 1120 x 2150 mm
Calibrating roller as grooved rubber cover graining settled
rubberized pressure rollers
Band blow-out bulb controlled workpiece
Cleaning brush at the outlet

Terminal Panel with 10 freely programmable loop programs for automated machine control.
Parameters: speed, work piece height, pressure bar usage points front and rear as well as edge segments, band blow nozzle

Infeed and outfeed table with rollers
Grinding pressure variable for the edge segments can be set separately
Hood latch
Suction connection 180 mm, 140 mm and 2x100mm
CE mark
Operating instructions
without shown cord

Super clean machine with very good facilities and only 3327 hours, about half an hour per day.

Original paint, just a little to spotted.

Dimensions approx. 1840 x 2300 x 2190 mm (Lxwxh). Weight approx. 2600kg.

Please the PDF file with our terms and conditions and order form.
The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".
1996
17,500 €  
    request
125828727 109

SODICK AQ900L for sale
E2475


VIDEO: State: Machine still working by customer X-Axis Travel (mm):900 X-Axis Travel (mm):600 X-Axis Travel (mm):400 Worktank length: Worktank width: Worktank height: Max. workpiece length:1200 Max. workpiec ...
used machine
 
VIDEO:

width=668

State: Machine still working by customer


X-Axis Travel (mm):900
X-Axis Travel (mm):600
X-Axis Travel (mm):400
Worktank length:
Worktank width:
Worktank height:
Max. workpiece length:1200
Max. workpiece width:900
Max. workpiece height:400
Max. workpiece weight:2000 kg
Taper angle/height:
Automatic Wire Feeding:
Length x width x height:
Weight (kg):
Worked power hours:


The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.


 
2006
Price  
  FR   request
125776229 703

STEPHAN MC10 for sale
Micro cutters


Stephan MC10 Mikrocut, Colloid mill, Koialmühle, Emulsifyers, Inotec Voltage: 400V Hedging: 16A Performance: 7500W Speed: 3000 rpm Automatic switching from Star to Delta connection equipped with 0, 05 mm cutting ...

 
Stephan MC10 Mikrocut, Colloid mill, Koialmühle, Emulsifyers, Inotec

Voltage: 400V
Hedging: 16A
Performance: 7500W
Speed: 3000 rpm
Automatic switching from Star to Delta connection
equipped with 0, 05 mm cutting ring
Machine is in very good condition, still should be cleaned thoroughly before use

Video about test run and more pictures available
 
9,450 €  
    request
125828729 109

FANUC ALPHA 1iA for sale
E2475


MACHINE BY CUSTOMER STILL WORKING 16000 WORKING HOURS
used machine
 
MACHINE BY CUSTOMER STILL WORKING

16000 WORKING HOURS
1999
Price  
  CH   request
125776222 102

SP 430Y 1100 MAS for sale
CNC Turning Centers


Oversize diameter above the bed: 660 mm Surface diameter above the transverse support: 480 mm Max. Workpiece length: 1100 mm Number of positions of the upper toolhead: 12 (powered 6) Max. spindle speed: 3150 (min-1)  ...
used machine
 
Oversize diameter above the bed: 660 mm
Surface diameter above the transverse support: 480 mm
Max. Workpiece length: 1100 mm
Number of positions of the upper toolhead: 12 (powered 6)
Max. spindle speed: 3150 (min-1)
still engaged, works on 1 shift. The machine is still under warranty (until June 21, 2018), the Sinumerik 840D control system.
More information on demand.
2016
Price  
  SK   request
125828733 109

FANUC ALPHA 1B for sale
E2475


State: Machine still working by customer Travail
used machine
 
State: Machine still working by customer

Travail
1994
Price  
  FR   request
125776059 2486

VOLKSWAGEN VW 251-BH for sale


last off Code: BH-39257 first registration: 27.01.1989 elapsed. Mileage: 36.999 km power: 51 kW displacement: 1,588 of CC test badge: no test badge must be applied pursuant to § 57a, authorities from the buye ...

 
last off Code: BH-39257 first registration: 27.01.1989 elapsed. Mileage: 36.999 km power: 51 kW displacement: 1,588 of CC test badge: no test badge must be applied pursuant to § 57a, authorities from the buyer drive type: diesel type, variant, version: 251-BH TYPE FIN: WV2ZZZ25ZKH024611 equity / total weight: 2,060/2,600 kg color : green building: closed box seats: 5 (2 front, 3 rear section) facilities: fabric equipment, gear, window at the front, built up table in the rear area of documentation: licence of types of available key: 1 notes to the Condition: Paint has div. color differences, abrasions in A-pillar left front, abrasions at front bumper, sticker residue, abrasions in side wall of whole vehicle trunk door rubber, abrasions with rust Moss education distributed, with Rear apron, rust spots to tailgate, abrasions on left side panel, engine easily leaking, heavily rusted exhaust system, protective plate for exhaust system poorly, engine cold hard start, rusted axle body HA, right upper Balljoint on the front suspension knocked out, right wheel bearing clearance at the rear axle, rubber bearings under wishbones at the front and rear suspension and stabilizer at the front axle cracked and partially knocked out uneven braking action on the front and rear brake, brake discs, slightly rusted on the front axle and brake line, brake hoses front and rear cracked, articulated in the left steering link knocked out, right headlight poorly attached, wiper blades damaged, rusty frame, springs and shock absorbers, will several small stone chips in the windshield easier folding Grill at the left and right side panel rust spots on the front wall in the area of the windscreen, torn left and right front bumper corner, expressly pointed out, that no complete inventory and check the functionality of the auction object has been performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
 
Price  
    request
125828737 109

FANUC ALPHA 1iA for sale
E2475


[embed]https://youtu.be/FgeQMgEjChg[/embed] [embed]https://youtu.be/2RsmDqZozro[/embed] [embed]https://youtu.be/h0smRvGgd0A[/embed] [embed]https://youtu.be/LmUSY7y3ihw[/embed] [embed]https://youtu.be/ThYrLEDO ...
used machine
 
[embed]https://youtu.be/FgeQMgEjChg[/embed]

[embed]https://youtu.be/2RsmDqZozro[/embed]

[embed]https://youtu.be/h0smRvGgd0A[/embed]

[embed]https://youtu.be/LmUSY7y3ihw[/embed]

[embed]https://youtu.be/ThYrLEDOpHI[/embed]

State: Machine still working by customer and very well maintained


ONLY 16000 working hours

Video available.

IX-Axis Travel (mm):
X-Axis Travel (mm):
X-Axis Travel (mm):
Worktank length:
Worktank width:
Worktank height:
Max. workpiece length:
Max. workpiece width:
Max. workpiece height:
Max. workpiece weight:
Taper angle/height:
Automatic Wire Feeding:
Length x width x height:
Weight (kg):
Worked power hours:

The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.
1999
Price  
  IT   request
125776055 2422

OÄF 20-320 G3 for sale


last off Code: BH-79313 year: 1979 Protec.. Mileage: 117.489 km performance: 235 kW displacement: 12.763 of CC test badge: no test badge must be applied pursuant to § 57a, authorities from the buyer type, var ...

 
last off Code: BH-79313 year: 1979 Protec.. Mileage: 117.489 km performance: 235 kW displacement: 12.763 of CC test badge: no test badge must be applied pursuant to § 57a, authorities from the buyer type, variant, version: FIN: 6970318 equity / total weight: 15,500/22,000 kg seats: 3 features: with built-on Crane Palfinger, model?, nameplate cannot be found (art) leather seats, tyres: 14.00 R20 Gigantsteel with steel rims documentation: licence of types of available key: 1 comments to the State: sticker residue all-round vehicle, various color paint differences , Paint partially bleached out, rust spots with suspension right front, rust all around vehicle, rust spots at crane, engine damage to (turbocharger), piston Reiber (low compression), exhaust angeroset, coolant hose porous, steering knuckle hard repeatedly, rubber bearings under the triangle arms become porous and partly knocked out, easily beaten oil flow to the central axis, drive shafts, oil loss in the steering rack, knocked out uneven braking action on the middle and rear axle, steering joints, Hydraulikschläuchenteilweise porous, windshield wiper broken, left appearance at engine compartment broken, heavily rusted rust damage on cab, chassis and floor plate in the cab, partially rusted through, expressly pointed out, that no full inventory and check the functionality of the auction object has been performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
 
Price  
    request
125789872 109

BECHE KGH 8 for sale
Forging Hammer


pressure: tstroke: mm--------------------------------------------------: ELECTRICAL SPECIFICATIONS: - total power consumption: 180 kW- mains power supply: 300 kVA- mains voltage: 400 V- mains frequency:  ...
used machine
 
pressure: t
stroke: mm
--------------------------------------------------:
ELECTRICAL SPECIFICATIONS:
- total power consumption: 180 kW
- mains power supply: 300 kVA
- mains voltage: 400 V
- mains frequency: 50 Hz
DIMENSIONS / WEIGHTS:
- total height: 7455 mm
- height above floor level: 5830 mm
- total weight approx.: 116000 kg
Work capacity max. 80 kJ
max. stroke rate: 92 / min
min. stroke 570 mm
max. stroke 835 mm
Weight of RAM 5400 kg
Press bed: 91000 kg
Distance between guide ways: 890 mm
Working height: 700 mm
Height of RAM: 830 mm
Working pressure: 200 bar

only 86000 strokes

Complete forging line in nearly new condition consisting of:

Induction heating system SMS Elotherm BTH2415
Forwarding vibrator
Mechanical press SMERAL LE400C
Spring elements

Optional:
Billet shear FICEP

Still under power



This ad was created with MODUL MWS - the software solution of LogoTech.
2009
Price  
    request
125776051 2413

OÄF 19-281 FA for sale


last off Code: BH-83559 year: 1987 Protec.. Mileage: 211.330 km performance: 206 kW displacement: 11,413 of CC test notice: no test badge must be applied pursuant to § 57a, authorities from the buyer type, va ...

 
last off Code: BH-83559 year: 1987 Protec.. Mileage: 211.330 km performance: 206 kW displacement: 11,413 of CC test notice: no test badge must be applied pursuant to § 57a, authorities from the buyer type, variant, version: FIN: VAO505A241F004293 equity / total weight: 10.580/18,000 kg seats: 3 dimensions: area NG: fabric facilities documentation: licence of types of available key: 1 notes to the State: motor screw in the oil filler tube is missing, light Achsenlenkspiel, uneven braking action on the front and rear axle, battery defective, switch on dashboard defective, Cellon number plate lighting and indicators is lacking, partially rusted frame and springs, plateau and lateral support some large rusted through, heavily rusted fenders and cab floor and partially rusted through key for doors, broken, left window regulator broken, broken rocks to the windshield, cover in the passenger seat, cover with headrest torn front Grill, is missing, div. parts were removed, front bumper mined out, div. prov. Color coatings all-round vehicle sticker residue all-round vehicle, abrasions all around vehicle with various rust, rust spots tipper range, indicator lense left front is missing, driver lock broken, expressly mentions that no full inventory and check the functionality of the auction object has been performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
 
Price  
    request
125789835 210

GUBISCH CW 1 for sale
Window production centre


Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50/40 mmDimensions (L/W/H): 3500x2400x2400 mmweight: 3750 kg! Machine on order for sale Can still be visited in action!GUBISCH - CENTROMAT CW 1fo ...

 
Tenoning spindle: 1 St.
Number of milling agregates: 4 St.
Spindle diameter: 50/40 mm
Dimensions (L/W/H): 3500x2400x2400 mm
weight: 3750 kg
! Machine on order for sale!

! Can still be visited in action!

GUBISCH - CENTROMAT CW 1

for window and door production with 50 mm D spindles in longitudinal profiling.

With the following processing stations and possibilities:

1.0 automatically cutting the cross-cut saw from above

- Engine power, including engine brake 3.0 kW
- Spindle speed 2800 rpm.
- circle diameter 350 mm
- Spindle diameter 30 mm D
- clamping flange, 1 driver 6 mm D
TC 42 mm 120 mm dia.
- Vertical stroke pneumatic 100 mm
- Horizontal stroke pneumatic 160 mm
against 2 manual 6-fold revolver stops
- Shaving dust hood with extraction nozzle 105 mm D

2.0 slot unit

- Engine power, including engine brake 9.2 kW
- Spindle speed 3800 rpm.
- circle diameter 320 mm max.
- Spindle diameter 50 mm
- Spindle usage length 300 mm
- Vertical stroke pneumatically fixed 2 x 100 mm
- suitable for 3 tool sets a 100 mm
- zero height 10 mm
- Shaving dust hood with extraction nozzle-D 160 mm

3.0 slot table

- Table height above ground 920 mm
- Feed for 4 speeds freely adjustable:
1st milling, oblique window u. Tippgeschw. 7 m / min.
in the tableau.
2. Sawing speed 7 m / min.
3. Transfer speed 10 m / min. = on the device.
- 4. Return speed / without machining. 25 m / min.
- Engine power including engine brake 0.37 kW
- 1 clamping cylinder with 2 additional. pressure shoes
- Workpiece clamping pneumatic

3.1 counter timber
- Counter Holchanger with 2 positions, automatically changeable as well
manual rotation of 180 °

3.2 length stop
- Stop system with 3 scales for
a) frame outside
b) wing upright upright
c) wings outside across
- Manual adjustment
- Length 2300 mm
- swiveling for diagonal windows +/- 60 degrees

3.3 Angle transfer
automatically via vertically indexed feed roller in the milling feed

4.0 milling machine
for longitudinal profiling and overturning of windows / doors with the
following
aggregates:

4.1 Synchronized milling unit with automatic dipping
- Synchronism
- Automatic dipping can be used for refolding
- Engine power including engine brake 7.5 kW
- Spindle speed 6000 rpm.
- circle diameter 240 mm max.
- Side stops adjustable for Zero-D 140 mm max.
tools 112 mm min.
- zero height 10 mm
- Spindle diameter 50 mm D
- Spindle useful length 100 mm
- Horizontal stroke pneumatic 80 mm
- Shaving dust hood with extraction nozzle D 120 mm

4.2 Profile milling unit

- reverse
- Engine power including engine brake 9.2 kW
- Spindle speed 6000 rpm.
- circle diameter 240 mm max.
- Side stops adjustable for Zero-D 140 mm max.
tools 112 mm min.
- zero height 10 mm
- Spindle diameter 50 mm D
- Spindle usage length 300 mm
- Vertical stroke pneumatically fixed 1 x 100 mm
suitable for 3 tool sets a 100 mm 2 x 100 mm
- Shaving dust hood with extraction nozzle-D 140 mm

4.3 Fitting device

- reverse
- Engine power including engine brake 4.0 kW
- Spindle speed 6,000 rpm.
- circle diameter 200 mm fix
- zero height 10 mm
- Spindle diameter 50 mm D
- Spindle useful length 100 mm
- Horizontal stroke 80 mm
- Chip extraction with extraction nozzle-D 120 mm

4.4 Glass bead sawing unit
- reverse
- Engine power including engine brake 3.0 kW
- Spindle speed 3,000 rpm.
- Spindle diameter 30 mm
- Spindle useful length 15 mm
- circle diameter 200 mm
- clamping flange, 1 driver 6 mm D
TC 42 mm 85 mm D
- Vertical stroke pneumatic 100 mm
- Glazing bead removal
Incl. Anti-kickback device on the unit
- Shaving dust hood with extraction nozzle-D 80 mm
- including electr. control

4.5 feed
- Motor power 0.75 kW
- Feed rate 6 m / min.
- Roller distance
in the area of processing units 110 mm
in the area of the feeder 200 mm
- Feed rollers individually adjustable diagonally to the stop

4.6 Vertical right stops
- Stop 1 + 2 for 1 mm chip removal
adjusted
- adjustable for zero diameter 112 - 140 mm

5.0 Workpiece return device
- The finished workpieces come over a sloping roller conveyor
back to the operator.

6.0 central control

Clear central control panel with standard control and semi-automatic
in the slot or profile milling unit
(3 programs for frame production IV)
- Single and combined operation with automatic angle transfer function
- with Umfälzbetriebsschaltung including 4-step control
- simplest, easy to understand, logically structured handling of the controller

8.0 Technical connection data
- compressed air connection 3/8 8 bar
- compressed air consumption approx
- Extraction air volume 135 m3 / min.
- Operating voltage 380 volts, 50 Hz.
- Connected total 36.0 kW
- Extraction air velocity 32 m / sec.
- Electrical equipment according to VDE 0113 / IP 54
- Loading weight approx. 3750 kg

(technical data according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
4,000 €  
    request
125761263 401

APV AND SPX 15000 liters/hour for sale
Flavoured Still Water Production Equipment APV 15 000 l/h


Flavoured Still Water Production Equipment APV 15 000 l/h Complete flavoured still water production plant made by French APV and Polish SPX in year 2008. The processing plant has every item from sugar melting, flavou ...
used machine
 
Flavoured Still Water Production Equipment APV 15 000 l/h

Complete flavoured still water production plant made by French APV and Polish SPX in year 2008. The processing plant has every item from sugar melting, flavouring, pasteurizing, storaging, chilled water and steam production. All design is made by APV, control system is build with Siemens Simatic S7 series PLC.

Techncial charasteristics:
Manufacturer APV and SPX
Installation year 2008
Capacity 15 000 liters / hour

Main equipment
• Liquiverter 500 liters stainless steel sugar mixing tank with 18.5 kW agitator
• Compond syrup mixing tanks 2 x 6000 liters, both with 4 kW agitator and automatic CIP
• Sugar measuring and flavouring unit
• Sugar Storage Tanks 2 x 17400 liters, insulated tanks with automatic CIP and air blowing system
• Storage tank before filling line, capacity 6000 liters with automatic CIP, nitrogen injection system and 3 kW discharge pump.
• Steam generator SMS 3.5 bar, 150 C
• Water chiller
• CIP line with 4 tanks.
2008
Price  
  FI   request
125712916 102

DAEWOO PUMA 230 MSB for sale
CNC Lathe


Weight approx.: 4500 kgDimensions (l x w x h) approx.: 4300 x 1900 x 2400 mmDescription: Serial number 20 MS 0187, FANUC SERIES 18 I-T CNC control for 4 controlled axes, swing diameter over bed 510 mm, over cross slide 2 ...
used machine
 
Weight approx.: 4500 kg
Dimensions (l x w x h) approx.: 4300 x 1900 x 2400 mm
Description: Serial number 20 MS 0187, FANUC SERIES 18 I-T CNC control for 4 controlled axes, swing diameter over bed 510 mm, over cross slide 290 mm, collision-free diameter 210 mm, largest diameter 320 mm, machining length 305 mm, X axis 175 mm (15 + 160), Z axis 330 mm, bar diameter 66 mm, control system: 12540 h, automatic time 1534, feed time 2665 (on 07.06.2018), machine will be still used for less hours, drive power 15/11 kW, spindle speeds up to 4500 rpm, with main and counter spindle (with adjustable B axis), C axis for main spindle, tool turret with 12 positions VDE 30 for driven tools, blow-out device for counter spindle, hinge chip conveyor to the side, collet chuck for main spindle, 2 additional chucks 200 and 240 mm diameter (it was not possible to check whether the chuck fits or not), 1 part ejector must be overhauled, ejection arm was broken and must be replaced, the defective spare part is also supplied, incl. German/English documentation
2000
used machinery auction RESALE 25,900 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More STILL models (2 or more machines):
Still DFZ 15 - Flatbed Towing Truck - DPX-7005 (2)
STILL RX 50-13 (2)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Folding box cartoning machines Schut Sprinter S1000


Sprinter S1000 carton sealer Schut Systems offers top loading carton sealers in various speeds that can be integrated in an existing packaging line. The machine closes the carton made of duplex or corrugated cardboard and seals it with hotmelt. This particular line is still in production till week 3 of June. Very good working condition. This machine comes complete with automatic box-unfolding unit. From there collected on a conveyor belt. On the conveyor it allows to put product inside the unfolded box. The belt automatically brings the box with the product to the Sprinter that glues and closes the box. It can only be offered as a complete line with the unfolding machine, belt, sprinter with glue unit. Installation is negotiable

CNC Turning Centers SP 430Y 1100 MAS


Oversize diameter above the bed: 660 mm Surface diameter above the transverse support: 480 mm Max. Workpiece length: 1100 mm Number of positions of the upper toolhead: 12 (powered 6) Max. spindle speed: 3150 (min-1) still engaged, works on 1 shift. The machine is still under warranty (until June 21, 2018), the Sinumerik 840D control system. More information on demand.

APV and SPX 15000 liters/hour


Flavoured Still Water Production Equipment APV 15 000 l/h Complete flavoured still water production plant made by French APV and Polish SPX in year 2008. The processing plant has every item from sugar melting, flavouring, pasteurizing, storaging, chilled water and steam production. All design is made by APV, control system is build with Siemens Simatic S7 series PLC. Techncial charasteristics: Manufacturer APV and SPX Installation year 2008 Capacity 15 000 liters / hour Main equipment • Liquiverter 500 liters stainless steel sugar mixing tank with 18.5 kW agitator • Compond syrup mixing tanks 2 x 6000 liters, both with 4 kW agitator and automatic CIP • Sugar measuring and flavouring unit • Sugar Storage Tanks 2 x 17400 liters, insulated tanks with automatic CIP and air blowing system • Storage tank before filling line, capacity 6000 liters with automatic CIP, nitrogen injection system and 3 kW discharge pump. • Steam generator SMS 3.5 bar, 150 C • Water chiller • CIP line with 4 tanks.

Meura 550 hl / brew


Mash Filter MEURA 2001 with 48 pcs of 1800 x 2000 mm plates This Meura a thin-bed, membrane-equipped, mash filter was installed in year 2000 in 550 hl beer brew line and it's operation was closed in year 2010 but it is still installed and powered. In 2010 it was preserved properly for long term stoppage first filled with water and later dried completely. This is a complete Meura mash filtration system from wort pump to filtered beer outlet and it includes sparging water tank with a pump and spent grain pneumatic discharge system. The mash filter has 48 polyprobylene plates with membrane cloths and hydraulic jack for opening and closing of the plates. The equipment is in good condition. Technical characteristics: Made in year 2000 Machine number 99102 Filter plates 48 pcs, sixe 1800 x 2000 mm Filter section of one plate 5.6 m2 Total filtration area: 268.8 m2 Sparge water rate min 2.2 hl/100 kg malt Brews / day up to 12 High gravity filtration possible Control PLC Siemens Simatic S7-400 (slave) The delivery includes the following equipment: • Meura Filter with 48 plates and hydraulic system (3 kW) • Wort pump 11 kW • Sparging water tank 1.2 m3 with control valves • Front end panel from infeed flow meter to outfeed flow meter • Spent grain silo • Spend grain discharge screw + system including pressurized air infeed system • Pneumatic control cabinet • Control cabinet with PLCs and frequency converters • All related instrumentation • Available documents and PLC (Siemens Simatic S7) program in digital format

ABB Stall Refrigeration 2 x Stall SVA 26


Liquid Chiller Plant 1075 kW with 2 x ABB Stall SVA 26 Ammonia compressors This is complete liquid chiller plant with two vertical ABB Stall screw compressor packages working with refrigerant R717 / ammonia, condenser, NH3 buffer tank, evaporative cooler, plate heat exhanger and pumps. This plant has total cooling capacity 1075 kW with evaporating temperature 0 C and condensing temperature +35C. Equipment are well maintained and still installed. List of main equipment ABB Stall screw compressor 1 Manufacture's model SVA 26 Manufacturing year 1994 Serial number 7748 Cooling capacity 495 kW / 140 tons Type of refrigerant R717 ammonia Electric connection 3-phase / 380V/ 50 Hz Electric drive XX kW ABB Stall screw compressor 2 Manufacture's model SVA 26 Manufacturing year 1994 Serial number 7790 Cooling capacity 580 kW / 165 tons Type of refrigerant R717 ammonia Electric connection 3-phase / 380V/ 50 Hz Electric drive XX kW Evaporative condenser made by Baltimore Manufacturer's model VXC S 350 Production number H030470 Manufacturing year 2003 Cooling capacity 1300 kW

Krones AG PET Hot Fill 330 and 500 ml


Filling Line Krones PET 25 000 bpf, hot filling, semi aseptic The line was delivered by Krones in 2009 and some machinery was added in 2014, operating hours from 1000 to 11 000 hours / machine. Main equipment is upgraded with latest modernization of Krones and it is in excellent condition. Line is still installed and fully operational. It has been filling 0.33 and 0.5 liter PET bottles with various non-carbonated, fruit juice based drinks at filling temperatures of 85-90 C. The line has sleeve labeling and two Variopac Pro secondary packing machines which will allow versatile packaging possibilities in tray-shrink, pad-shrink and only shrink combinations. Palletizing line with pallet wrapper is not a part of the delivery. The line has Siemens Simatic S 7 control PLCs with operator Krones Touch Screens as operating interfaces and all latest programs has a digital backups. Original documentation is available in English language in paper copies as well as CD roms Line main characteristics Made by Krones AG Machines made in year 2009 – 2014 Suitable for Ice tea, juices, still water, milk with fruit flavour, etc. System of filling: Over pressure hot filling, semi aseptic Capacity 25 000 bph Container sizes 330 ml and 500 mm Neck finish Standard 38 mm Secondary packaging pad – shrink / tray – shrink / shrink 6 x 4, 3 x 4, 2 x 4, 2 x 2 Operating hours From 1100 to 11 000 hours/machine PLC Controls Siemens Simatic S7 with Krones Ipanels

PET Stretching blowing machines Sidel SBO4


SIDEL SBO-4 still in continuous use. --- We offer new and used machines. With any further questions, please do not hesitate to contact us.

Buhler GmbH Malt Mill Buhler Maltomat 2


Malt Mill Buhler Maltomat 2 with conditioner and malt hopper This is a malt milling line, capacity 10 t/h, built in 2004 by Buhler from malt conditioner to malt discharge conveyor, all still installed but electricity disconnected. Controlled by Siemens Simatic S7 PLC. Equipment is in good condition. The delivery includes the following equipment and documentation: 1. Malt conditioner Bühler Condimat, type BBFA 3255, electric motor 5.5 kW 2. Malt mill Bühler Maltomat 2, type DBZG 152MU, 6-rolls, roll length 1500 mm, electric motor 30 kW/1450 rpm. Crushing with three grinding roll pairs and only one screening stage (after the husk rolls) which produces a high husk volume for fast wort separation. Comes with one complete set of reconditioned grinding rolls 3. Bühler Malt hopper, capacity 14 tons with discharge chain conveyor type MNKA 200, length 10 meter, capacity 72 tons/h, electric motor 11 kW 4. Original Bühler documentation and copy of PLC program

Vertical Turning Machines PITTLER PV 1250/1-1


Vertical Turning, Drilling and Milling Centre 2009 – 2011 start-up of the machine chuck-/table diameter max. mm 1.250 turning diameter mm 1.250 swing max. mm 1.400 distance between spindle flange and tool holder mm 1.850 travel X – from table centre to ATC on the right side of the machine mm 1.555 travel X – beyond the machine centre to the left side of the machine mm - 455 travel – Z-axis mm 1.000 C-axis – programmable increment degree 360.000 x 0,001 positioning accuracy sec. +/- 2 spindle flange diameter DIN 6353 mm 380 spindle speed rpm 800 no. of range 2 rapid motion – X-axis mm/min 40.000 rapid motion – Z-axis mm/min 24.000 Swivelling Head with Turning- Milling- and Grinding Spindle – B- and Y-axis 1 tool holder CAPTO C8 1 tool holding fixture for drilling, milling and grinding tools CAPTO C8 spindle speed max. rpm 8.000 torque max. Nm 140 swivelling range B-axis degree 0 – 270 travel – Y-axis mm +/- 115 Tool Magazine disc magazine station 36 tool holder CAPTO C8 tool diameter mm 250 tool length max. mm 400 Power Requirement Main Spindle Motor electrics – voltage / frequency V/Hz 400/50 power requirement at 100% duty cycle kW 2 x 52 torque max. at 40% duty cycle Nm 7.500 Machine dimension and weight machine weight kgs 29.000 accessories kgs 4.000 machine dimension mm 7.600 x 3.660 space requirement incl. coolant device approx. mm 11.500 x 4.200 machine height mm 4.528 Accessories and further Informations: CNC-Control System SIEMENS 840D TRANSMIT transformation in peripheral surface extension by grinding cycles of the SIEMENS 840D language German and English safety integrated tool Life Display workpiece measurement with touch probe make MARPOSS, type T25 teleservice – for integrated PLC of the Sinumerik 840D 6-jaw power chuck with oscillation mechanism for low-deformation clamping of thin-walled components., make SCHUNK, type ROTA NCR 800 Z 520 changeable flange mounted under the chuck, to compensate the machining height and low workpieces hydraulic clamping cylinder for internal and external clamping, programmable stroke Control clamping pressure reduction for a 2. clamping pressure, automatic available in the program clamping Pressure regulation dressing attachment with Single Grain dressing Diamond chip conveyor - hinged belt conveyor, discharge height 1,250 mm coolant attachment and automatic coolant cleaning system with coolant tank 1.500 l make KNOLL, coolant pressure 20l/min at 50 bar, 20l/min at 13 bar, 300l at 3 bar machining area – flushing flushing gun, hand-operated working area complete covered hydraulic electric cabinet tool life display, each tool position separately programmable, acquisition in the PLC control and display on the LC display: 1. active tool 2. service life 3. remaining tool life 4. number of still available tools The machine was used in only 1 shift.

Vertical Turning Centres PITTLER PV 1250/1-1


Vertical Turning, Drilling and Milling Centre Year of manufacture 2009 - 2011 start-up of the machine chuck-/table diameter max. mm 1.250 turning diameter mm 1.250 swing max. mm 1.400 distance between spindle flange and tool holder mm 1.850 travel X – from table centre to ATC on the right side of the machine mm 1.555 travel X – beyond the machine centre to the left side of the machine mm - 455 travel – Z-axis mm 1.000 C-axis – programmable increment degree 360.000 x 0,001 positioning accuracy sec. +/- 2 spindle flange diameter DIN 6353 mm 380 spindle speed rpm 800 no. of range 2 rapid motion – X-axis mm/min 40.000 rapid motion – Z-axis mm/min 24.000 Swivelling Head with Turning- Milling- and Grinding Spindle – B- and Y-axis 1 tool holder CAPTO C8 1 tool holding fixture for drilling, milling and grinding tools CAPTO C8 spindle speed max. rpm 8.000 torque max. Nm 140 swivelling range B-axis degree 0 – 270 travel – Y-axis mm +/- 115 Tool Magazine disc magazine station 36 tool holder CAPTO C8 tool diameter mm 250 tool length max. mm 400 Power Requirement Main Spindle Motor electrics – voltage / frequency V/Hz 400/50 power requirement at 100% duty cycle kW 2 x 52 torque max. at 40% duty cycle Nm 7.500 Machine dimension and weight machine weight kgs 29.000 accessories kgs 4.000 machine dimension mm 7.600 x 3.660 space requirement incl. coolant device approx. mm 11.500 x 4.200 machine height mm 4.528 Accessories and further Informations: CNC-Control System SIEMENS 840D TRANSMIT transformation in peripheral surface extension by grinding cycles of the SIEMENS 840D language German and English safety integrated tool Life Display workpiece measurement with touch probe make MARPOSS, type T25 teleservice – for integrated PLC of the Sinumerik 840D 6-jaw power chuck with oscillation mechanism for low-deformation clamping of thin-walled components., make SCHUNK, type ROTA NCR 800 Z 520 changeable flange mounted under the chuck, to compensate the machining height and low workpieces hydraulic clamping cylinder for internal and external clamping, programmable stroke Control clamping pressure reduction for a 2. clamping pressure, automatic available in the program clamping Pressure regulation dressing attachment with Single Grain dressing Diamond chip conveyor - hinged belt conveyor, discharge height 1,250 mm coolant attachment and automatic coolant cleaning system with coolant tank 1.500 l make KNOLL, coolant pressure 20l/min at 50 bar, 20l/min at 13 bar, 300l at 3 bar machining area – flushing flushing gun, hand-operated working area complete covered hydraulic electric cabinet tool life display, each tool position separately programmable, acquisition in the PLC control and display on the LC display: 1. active tool 2. service life 3. remaining tool life 4. number of still available tools The machine was used in only 1 shift.

Chocolate line Westbrook & Wood SDD800


Manufactured by WESTBROOK & WOOD Model SDD 600 Mould size 600mm x 225mm re-Build 2018 PLC TOUCH SCREEN CONTROL ALL PARTS the ability to control all features from a PLC TOUCH SCREEN production reporting feature high sensitivity work in accordance with safety standards recipe module 48 PISTONS ONE SHOT DEPOSITOR 1 NOZZLE CHOCOLATE & PRALIN 1 TIME MAX 60GR 48 NOZZLE X 60GR=2,88KG NEW DEPOSITOR ALL PARTS MADE 8000 SERIES ALIMINIUM MOULD HEATHER NEW BAND (skidproof SYSTEM) NEW VIBRATION UNIT AUTO RE-MOULDING NEW CHAIN 16B-1 SERIES MADE IN GERMANY ALL ELECTRONIC PARTS NEW BY OMRON BRAND(2 YEAR GUARANTEE) ALL AIR PARTS NEW (2 YEAR GUARANTEE) 2 NEW SERVO MOTOR USE ON DEPOSITOR BY OMRON BRAND (2 YEAR GUARANTEE) 1 MAINLY NEW SERVO MOTOR USE BY OMRON BRAND (2 YEAR GUARANTEE) COOLING TUNNEL NEW eVaPorator (2 YEAR GUARANTEE) NEW FAN (2 YEAR GUARANTEE) MAINLY NEW CLIMA MOTOR UNIT (2 YEAR GUARANTEE) DEPOSITOR HEAT AND COOLER SYSTEM NOW AS A NEW MACHINE NOT ANY PROBLEM EXCELLENT CONDITIONS ANY TIME VISITABLE TO MACHINE STILL RUNNING PRODUCTION AREA

Destillationsanlagen Interis , ETS rectification unit 10000 l/24h


Alcohol Rectification Unit machine performance 10000 l/day Producer: Interis,ETS Marcel Labbe full technical documentation the process takes place in 3 stages: 1) Cleansing 2) Rectification 3) cleaning product: spirit 96.5%

Roland 905-6


Five colours plus coater Straight Coater unit High Pile RCI Rolandmatic Year: 2007 SIZE: Máximum: 1000X1400mm Minimmum: 600X850mm Total of hours: 32 452Hours and 45 minutes 51 874 745 Impressions All Automatic Washers Infra red Hot air PPL –Automatic plate change No damages on cylinders or gears In very good technical and working condition Still in production

Schenk Filterbau GmbH ZHF / Z-40 C3


Beer Filtration Line with Schenk 200 hl Kieselguhr Filter This filtration line has been filtering beer with the capacity of 200 hl/h. The heart of this line is PRIMUS Kieselguhr filter by Schenk which is hydraulically operated. Filter unit has filter elements arranged horizontally one above the other and it has an integrated residual filtration unit for pre-and post-free filtration. Filter elements have static sealing system for biologically safe separation between notfiltrate and filtrate side. Each filter element is equipped with its own inlet manifold. This filtration line is complete with all functions except beer separator which is not included. This filtration line has complete CIP line. The filtration line is still installed and in normal operational condition Main equipment of this line: Filter Manufacturer: Schenk Filterbau GmbH, Germany Manufacturer’s type: ZHF / Z-40 C3 Manufacturing year: 1996 Trube volume 2600 liters Working pressure: 9 bar Working temperature: 20 °C Process photometer: SIGRIST-PHOTOMETER Sicon, 2010 Dosing pump: HILGE HYGIANA III/2 Block Super, 34 m³/h, 22 kW Pasteurizer/cooler: Alfa-Laval M10-BFHC, 69.3 ltr, 16 bar, 110 °C, 1996 Stabilizer dosing tank: Schenk D0-L-830, 830 ltr, 2000 Pump: Alfa Laval MR200S, 7.5 kW, 1997 Buffer tank: Holvrieka, 6 507 ltr, non-insulated, 3 bar, 1997 Fine filters 2 x Scheck Disc Fitter type MF 450 CIP Line 5 x 4 m3 with Siemens S7 controls

Muller Martini Valore


Muller Martini Valore Year: 2005 Working Hour: 2119 h. 1 x 1528 Cover Unit 6 x 1559 Twin Feeder 1 x 1558 Stitching Unit 1 x 1522 Trimmer 2 x 881.8070 Stitching Head 2 Spare Stitching Head Max. Size Trimmed: 36 x 30 cm Min. Size Trimmed: 14 x 7,5 cm Speed: 6000 cycles per hour Excellent Condition Still in production Located in Turkey Available Immediately

Heidelberg CD 74-4


Heidelberg CD 74-4 Year:2003 Size: 53x74 Impression: 120 Million CP 2000 Autoplate Change Auto Roller and Blanket Wash Alcolor Dampening Technotrans Recirculation Combistar Ink Temp. Water Cooled Weko Powder Spray Still in production Available immediately Located in Turkey

BenningerMercerising 92 Make offer


1 X BENNINGER MERCERISING INSTALLATION, 1992 COMPLETELY REFURBISHED 2014 TYPE: MS1 - S - 1E - EXTRACTA WORKING WIDTH: 1800MM CONFIGURATION: CLOTH FEEDING DEVICE WETTING TROUGH SQUEEZING MANGLE INTENSIV IMPREGNATING COMPARTMENT SQUEEZING MANGLE COOLING COMPARTMENT STENTER SECTION SQUEEZING MANGLE STABILIZING COMPARTMENT SQUEEZING MANGLE WASHING COOMPARTMENT SQUEEZING MANGLE BATCHING DEVICE INSTALLATION IS IN PERFECT CONDITION STILL FULLY INSTALLED IMMEDIATELY AVAILABLE

HEIDELBERG Rotaspeed


SINGLE COLOUR ROTASPEED MACHINE STILL IN PRODUCTION, IN BEAUTIFUL CONDITIONS YOURS BUYING OFFER ARE WELCOME

HEIDELBERG GTO V 52


MINUS VERSION STRAIGHT MACHINE CPC 1.02 ALCOLOR DAMPENING BALDWIN COOLING ELECTRONIC DOUBLE SHEET CONTROL QUICK ACTION CLAMPS POWDER SPRAYER 53 mine. IMPRESSION MACHINE STILL IN PRODUCTION

Murata 33H


We have 2 x Murata 33H texturizing machines for sale,nanufactured in 2000,240 2pindles.still wirking now.seriour buyers contact me

Man Roland Rekord RZK 3B P 1/1


Man Roland Rekord RZK 3B P 1/1 Double Blanket Year: 1980 Max. Size: 72x102 cm. Min. Size: 28x40 cm. Paper Thickness: 0,05 – 0,6 Speed: 12000 Still in production Located in Turkey Available immediately

Heidelberg SORS


Heidelberg SORS Year: 1978 Serial: 511421 Size: 70x100 cm Semi Alcohol Dampening (Converted from Water Dampening) Chiller Excellent Condition Still in production Available immediately

Bottle Capper 45000 bph for aluminum caps AROL, Italy EURO VA IES EVO Light


Bottle Capper AROL EURO VA for Aluminum Caps, 45000 bph This bottle capper was installed in 2017 and has very limited operating hours. It has been capping glass bottles with aluminum threaded caps. Capper is made of stainless steel and can be washed. The machine is still working and in excellent condition. Manufacturer: AROL, Italy Type: EURO VA IES EVO LIGHT Year: 2017 Operating hours approx. 1500 h Capacity: up to 45000 bph Capping heads: 4 pieces Pitch: 288 mm Certificate: CE

Filling Line KHS 50 000 bph and returnable KHS GmbH Glass bottles 0.33 and 0.5 ltr


Filling Line KHS 50 000 bph new and returnable bottles glass bottles This line is made by KHS in year 2005 and it was in operation till July 2013. It still installed, fully operational and is suitable for filling 0.3 – 0.5 liter glass bottles with beer and soft drinks, capacity upto 50 000 bph in 0.5 liter bottles. This line has also a bottle washer but not crate handling Main Characteristics • Capacity 50 000 bph at 0.5 liter bottles • Made by KHS in year 2005, in operation till 2013, still installed • For both new and returnable glass bottles, operated for 0.5 liter bottles only • Secondary packaging Kisters shrink tray packer and KHS palletizer • Operation controls made with Siemens Simatic S7 PLC system • Complete line in fair condition and immediately available for relocation List of main equipment 1. Bottle Depalletizer KHS Innopal 2. Bottle Washing Machine KHS Innoclean – compact design a. Capacity 55000 bph b. Double ended c. Two washing sections and a rinsing section 3. Empty Bottle Inspector OMNIVISION II by Filtec year 2008 4. Filling Block KHS Innofil DMG VVF/SVF, year 2005 a. Rinser with 112 heads b. Filler with 120 filling heads c. 18 capping stations for crown cork d. Hot water injection for beer foam creating before closing e. Automatic outside washing system f. Comes with 2 sets of spare parts for each (two) bottle format g. Crown cork feeding system by MSN Magnettechnik (with magnet conveyor) 5. Level Inspection System KHS Metec Promecon 4000 with two measuring bridges (x-ray) 6. Flash Pasteurizer KHS Innopro KZE a. with 11 m3 buffer tank, diameter 2.0 m, insulated 7. Air Dryer ACI one section approx. 2 meters 8. Labeling Machine KHS Innoket KL 2080, year 2005 a. Type KL 2080-40/120-48 PM P1 b. With two labeling stations for 3 labels – front, back, neck c. How glue system d. Inbult Date printer Lasetec (laser) e. Data printer Videojet inkjet printer Excel 170 i 9. Label Inspector KHS Metec Promecon 3000 with measuring bridge (x-ray) 10. Kisters TSP 050 B Secondary Packaging Machine, year 2005 a. For tray, film and colored film b. Packaging configurations 5 x 4 (6 x 4) 11. Transport system with two lines after secondary packaging for correct palletizer feeding with package turning unit 12. Palletizer KHS Innopal PN 1 N (H) 2 13. Pallet stretch wrapping machine Robopak 14. Pallet conveyor to warehouse

Beer Brewery 250 hl/Brew, 400 000-700 000 hl/year Steinecker Complete brewery


Beer Brewery 250 hl / brew 400 000 – 700 000 hl / year The brewery was originally built by Anton Steinecker in year 1984. Operation was stopped in January 2018 and it is almost untouched with all production equipment and water treatment (Only some tanks, EBI of the RGB line and filtration line were relocated to another brewery) This brewery is designed to produce high quality lager beers and pack them either in returnable glass bottles or 30 and 50-liter stainless steel KEGs. Annual technical beer production capacity is around 700 000 hl (with diluting high gravity beer) to actual 428 000 hl with 2 shift x 5 days packaging operation. Beer is packed in 0.5-liter returnable glass bottles and 30-50 liter stainless steel KEGs This brewery has Künzel made malt transport system from year 1984 with steel malt silos (3x 360 m3 malt, 2x42 m3 maiz). Malt handling capacity is 20 tons/hour and it has also 5 t/h malt dosing line with a hammer mill. Malt department is controlled with Siemens S7 200 PLC which has InTouch system. Malt house is complete and no missing equipment. Malt mill is wet type 2-roll Künzel. The complete line equipment is made by Steinecker in year 1984 and having substantial upgrade in 1994 and 2002 and it still powered and in good condition. This brew line can brew 8.5 brews / day, brew size 250 hl / brew, grist throw 5500 kg / brew and worth gravity up to 17 ° Plato. This brewery produced tree different type of high quality lager beers only. Last brew was made in December 2017 so everything is in good working order. This equipment forms a complete brewery (brew line) from malt mill to wort cooler with water island, CIP unit, buffer tank and Steinecker made Botec control system with Siemens Simatic S7-400 PLC up to the wort boiling. Yeast department is complete with sterilizer tank, two propagators and four yeast storage tanks. System is controlled with Siemens S7 PLC InTouch system. Filtration department has two good condition Alfa-Laval DAW units, 2 x 400 hl buffer tanks for DAW water and 4 x 400 hl BBT’s left. For fermentation this brewery has total cross capacity of 55600 hl tank volume. All fermenting tanks are outdoor model vertical tanks. Direct ammonia cooled CCTs Inox 10 x 2400 hl, glycol cooled CCTs Inox 14 x 1100 hl and direct ammonia cooled, coated (Fe) CCTs 4 x 2400 hl glycol cooled Packaging of beer is made with Krones year 1998 delivered returnable glass bottle line, capacity 45 000 – 55000 bph. The line has complete crate handing system and both flash and tunnel pasteurizer. Complete line (excluded EBI, which will go another brewery) is well maintained, powered and in full operational condition. The brewery has also KHS Till KEG line with 3 filling lines having capacity of 180 KEG / hour in 30 liter in stainless steel KEGs

Brew House Equipment, 230 hl/Brew Huppmann / ZVT two brew lines


Brew house equipment Huppmann/ZVU, two lines 230 hl/brew This is a complete brew line for beer made by Czech ZVU in 1990 and heavily modernized by Huppmann 2000. The brewery has two parallel brew lines and they have modern Huppmann Siemens S-7 series PLC based control system. Brewery was closed in the end of 2017 and is still installed. Main equipment •2 pcs Mash tuns volume 200 hl made by ZVT in year 1990 and modernized by Huppmann •2 pcs Pre run tanks volume 245 hl made by ASTRA in year 1990 •2 pcs Lauter tuns volume 230 hl. made by ZVT in year 1990 and modernized by Huppmann •2 pcs Wort kettle volume 230 hl made by ZVT in year 1990 •2 pcs Hob dosing units made by ZVT •2 pcs Whirpools volume 230 hl made by ZVT in year 2000 •Wort cooling system, Alfa Lavale in year 2000 •Ice water tank 21,6 hl made by Astra in 1990 •2 pcs Syrup tanks 26,0 hl made by Astra in year 1991. •Water buffer tanks (for ice, hot

Air Compressor Atlas Copco ZR 315 VSD bar, 50.2 m3/min Variable Speed Drive, 255 kW


Air Compressor Atlas Copco ZR 315 VSD The compressor is water cooled and totally oil free two stage screw compressor with inter- and after coolers. This compressor has energy saving speed control (VSD) for airflow airflow and it has been manufactured by Atlas Copco Belgium in year 2007. The equipment is a sound canopy and it is controlled with advanced Eletronikon 4 control system. The unit is still installed and in good condition. Technical data Manufactured by: Atlas Copco Belgium Type compressor: ZR 315 VSD Made in year: 2007 Estimated operation hours: 43000 Capacity (FAD): 50.2 m3/min at 8.6 bar Electric motor: 255 kW Shaft speed: 2430 rpm Main dimensions compressor: W x H x L 3.15 x 2.00 x 1.65 m Weight compressor: 4710 kg

PET Bottle Filling Line 36000 bph KHS Innofill, GEA, SIG cabonated and non-carbonated


PET Bottle Filling Line for carbonated or non-carbonated beverages 36000 bph This is a complete blow molding, filling and packaging line for carbonated or non-carbonated beverages having a capacity of 3 500ml with 28mm caps featuring KHS Rinser-Filler-Capper and Paramix Carbonating Blending Skid The heart of this line, the KHS Innofill PET Rinser-Filler-Capper relies on computer-controlled precision technology for careful and accurate filling of your carbonated and still beverages in PET bottles. Using volumetric filling, you can fill bottles to exact fill levels at high speeds with both lightweight and premium PET bottles. This Innofill PET DRV operates as a triblock machine, with a bottle rinser and capping turret. Short times for product and bottle changeovers reduce product losses and improve efficiencies. The KHS Paramix CMX Blending Carbonating System Is suitable for preparing fruit juices, juice beverages, carbonating mineral water and soft drinks allowing for clean, foam-free filling and excellent water deaeration

Aseptic Filling Line for PET Bottles 36000 bph GEA Procomac for non-carbonated beverages


Aseptic Filling Line for PET Bottles, GEA Procomac 36000 bph This is a complete ASEPTIC filling line for non-carbonated beverages 36000 bph in 500ml PET bottles, 38mm caps. Line is still running but must be dismantled in end of June 2018. Line is complete line with blow molding, aseptic filling & capping and packaging disinfection for juices, beverages, and ice tea. Full Aseptic parasitic acid and hydrogen peroxide sterilization. Equipment is in very good condition. The complete system consists of the following modules: -SIG 20 Cavity PET Reheat Stretch Blow Molder Corpoplast Blomax 20, 2007 -GEA Procomac disinfection using parasitic acid and hydrogen peroxide -GEA Plastic caps sterilizing system -GEA Procomac Dual Rotary PET Bottle Rinsers IR80.113, 80 Station Water Rinse, 2006 -GEA Procomac Rotary PET Bottle Sterilizer IR85.113, Dual 50 Station, Mfg’d year 2006 -GEA Procomac PET Bottle Filler FILLSTAR FX PET2 / 70.20.113, 70 Valve, year 2006 -GEA CIP / SIP Station -Tetra Pak Pasteurizer skid -Ancillary tanks and process equipment

Komori Lithrone 540


Komori Lithrone 540 Year: 1998 Impression: 237 Million PQC SAPC – Semi Auto Plate Change Komorimatic Dampening Auto Roller-Blanket Wash Baldwin IVT Combi IR Dryer Ink Temperature Control Baldwin Cooling and Recirculation Powder Spray Very well maintained the machine New Rollers 5th Unit can be offline for 4 color print. Still in production Available immediately Located in Turkey

Jenbacher 612 GSE 01


1500 kW , 91.247 hours , year 2000 , in perfect condition , still running , well maintained by Jenbacher , including heat recovery equipement , Hanwell katalysator . Complete installation . location : Holland .

TETRA PAK TBA21 1000 SQUARE LINE


THE COMPLETE TETRA PAK TBA21 1000 SQUARE LINE, INCLUDES TBA21/1000 FILLER V50, 17000 RUNNING HOURS, EASY RIGD ACCUMULATOR, APPLICATOR TCA88, WRAP AROUND PACKER TCBP70, CONVEYORS. THE LINE IS STILL RUNNING, EXCELLENT CONDITION.

Filler Block for Still and Carbonated Water SARCMI Bluestar 40-80-12H 25000 bph PET, 0.5 and 1.5 ltr


Filler Block for Still and Carbonated Water SARCMI Bluestar in PET Bottles This PET bottle filler block is from recently dismantled line and it has been filling still and carbonated water. Delivery includes AROL caper and SASIB pneumatic cap feedi ...

Filling Line for CSD, Still Beverages and Water and 2.0 ltr PET 15000 bph complete line


Filling line for CSD, Still Beverages and Water in PET 15000 bph This line has been filling still and carbonated water and soft drinks into PET bottles. The line was installed in 2005 and has been out of operation for one year. The equipment is in g ...

Glass Bottle Fillerblock AVE FHP 18.00 bph AVE Uniblocco FHO for still drinks, hot filling


Glass Bottle Fillerblock AVE FHP 18 000 bph for still drinks, hot filling This glass bottle rinsing-filling-capping machine was made by Italian AVE in 2002. It is designed for gravity based hot filling up to 85 – 95 °C. Gravity filling systems are suit ...

PET Blow Molding Machine KRONES Contiform C16 Krones AG 1.0 and 1.5 ltr, 19.200 bph


PET Blow Molding Machine KRONES Contiform C16 This PET blow molding machine type Contiform C16 was delivered in 2004 by Krones and it is still in operation till December 2017. It is filling CSD and Carbonated water in 1.0 and 1.5 liter PET bottles, tot ...

Distillery & Bottling Plant Frilli Implianti Extra Neutra Alcohol 10.000 ltr/day


Distillery & Bottling Plant Frilli Implianti 10 000 Liters ENA / 24 Hours Complete distillery to produce Extra Neutral Alcohol 10 000 liters / day from grapes and capable of packaging into glass bottles either 0.25 - 0.50liter. The complete desi ...

Malt Mill Buhler with conditioner and malt hopper Maltomat 2, Condimat malt milling line 10 tons/h


Malt Mill Buhler Maltomat 2 with conditioner and malt hopper This is a malt milling line, capacity 10 t/h, built in 1998 by Buhler from malt conditioner to malt discharge conveyor, all still installed but electricity disconnected. Controlled by Siemen ...

Glass Bottle Filling Line 50.000 bph with BWM Krones AG 0.33 and 0.5 L, BWM


Glass Bottle Filling Line Krones 50 000 bph with BWM This line was made by Krones in 1998 and it was in operation till begining of 2014, currently equipment are preserved for sale and still powered. The line used to fill beer in 0.33 and 0.5 liter for ...

Filling Line PET Bottles 9.600 bph for Still Water 0.5 and 1.5 L, PCO 1810 long


Filling Line PET Bottles for Still Water and Non-Carbonated Soft Drinks 9.600 bph This filling line is for still drinks only. It has been filling still beverages with syrup into PET bottles, and is a complete line from preform feeding and blow moldi ...

Microbrewery Mavim 500 liter/brew Complete micro brewery very good condition


Microbrewery, Mavim 500 liter/brew, 2012. The complete microbrewery designed for restaurants for production any types of beer and ale and filling KEGs. Capacity 500 liters brew, two - three brews per day. The equipment is still installed, it was used ...

Mixer-Carbonator KHS Innopro 250 hl/h KHS GmbH Innopro Paramix CMX 250


Mixer Carbonator KHS Innopro Paramix CMX 250 hl/h The fully automatic two-component beverage mixer, blender and carbonator is designed to continuously blend still and carbonated beverages ranging from fruit juices and mineral water to soft drinks, wh ...

Filling Line for Water in PET Bottles 30.600 bph SIDEL - 0.5, 1.5 & 2. for still and sparkling water


Filling Line for Water in PET Bottles SIDEL 30600 bph This line was deivered by SIDEL in year 2003 and it has been filling sparkling water in 0.5, 1.5 and 2.0 liter PET bottles. The line is complete from blow molder to secondary packaging and palletizi ...

Water Filling Line for PET Bottles 6.000 bph Parmatec for still and sparkling water


Water Filling Line for PET Bottles 6.000 bph, 1.5 and 2.0 ltr PET bottle filling line for still and sparkling water. Suitable bottle sizes are 1.5 and 2.0 liter. The line was installed in 1997 and has been out of production till 2016. The line is st ...

Unscrambler Lanfranchi for PET Bottles 12.000 bph Lanfranchi, Italy Rotating Unscrambler


Unscrambler Lanfranchi for PET Bottles 12 000 bph Complete never installed PET bottle unscrambler system made by Italian Lanfranchi in year 2005 - still in original delivery boxes. It is designed for 8 oz (0.237 liters), 20 (0.591 liters) and 33.8 oz ( ...

Wrap-Around Labeling Machine Krones Canmatic Krones AG Canmatic 960-28, 52.000 bph


Wrap-around Labeling Machine Krones Canmatic 960-28 52800 bph This machine was installed in 2005 and it is still running and available in September 2016. Total running hours today being around 40 000. The labeler is currently working with 0.5, 0.6 and  ...

PET Bottle Filling Line KHS 30.000 bph KHS GmbH Complete Bottle Filling Line


PET bottle Filling Line KHS 15 750 - 30 000 bph This complete beer filling line was delivered by KHS in year 2005 and it is still installed and in very good condition. This line is complete from preform feeding equipment to delivery package palletizing ...

Wartsila Gas Generators 19 MW Wartsila, Finland 2 x 20V34SG


Wartsila 19 MW Natural Gas CHP Power Plant with 2 x 20V34 SG generators This complete power plant equipment including building structures were delivered by Wartsila in year 2009 and it is still in original shipment crates. This power plant has two Wart ...

Empty Bottle Inspector HEUFT INLINE 50.000 bph Heuft GmbH InLine EBI with Reflexx


This Inline Heuft EBI was made in year 2007 and relocated in 2011. Today it is still installed but not in use nor connected to the power. this EBI is designed for class bottles, sizes 0.33 and 0.5 liters. The capacity of this Inline EBI is min 50 000 bph  ...

Palletizing and Stretch Wrapping Line KHS GmbH 60 pallets/h


KHS Palletizing and Stretch Wrapping Line capacity 60 pallets /h - 2005 The main equipment of this line was delivered by KHS in year 2005 (some pallet conveyors were used Krones conveyors), it is still installed and powered. The equipment is in very go ...
Get the latest machine offers by email: order newsletter