still wagner used for sale

Compressor, 8 bar, Worthington - Creyssensac - used - : Price: 3.500.-€ (net), dismantled and loaded Manufacturer: Worthington - Creyssensac Type: RL R 5000 AX2 Year of construction: unknown - could be 2000 Operating hours: unknown - still to be clarified Bar max: 8 m3/h: 395 KW: 37 V/ Ph/Hz: 400/3.0/50 64 Ampere min-1: 3,000 kg: 790 Condition: good

This is a completely new Handheld XRF Gun in full working order ready for use still in factory warranty. It has a great performance comparible to XRF such as Thermo Niton, Olympus Vanta or Bruker Titan or even other ED X-Ray Benchtop Spectrometer like Spectro Midex, Thermo Scientific, Bruker Mistral or Fischerscope. Original price of the system is more than 30.000Euros. It can analyze Precious Metals and Catalytic Converters very fast in 30sec. It is sold because we do not use it as much. SciAps X-505 Precious Metals Analyzer. Part No 910-500066 PM. Ultra lightweight X-ray analyzer featuring tapered, ergonomic design ideal for testing requirements. The X-505 utilizes a miniaturized X-ray tube, Rh anode (50 kV, 200 uA, 5 W) and high resolution, high count rate silicon drift detector (25 mm2 SDD, 140 eV at 5.95 Mn K-alpha line, at 90+% live time, 250k cps) for fast alloy chemistry  ...

Defender, compact scale platform, 150kg, D150BL, Ohaus, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Maximum load 150 Kg - Readability 20 g - Approved for calibration - 550 x 420mm -10 to 40°C, - stainless steel platform - optional with complete control cabinet for display - or optional with 1 pcs. digital weighing transmitter (see photos) 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returne ...

Qty. 1 Second-hand blower and PET filling line Mfc.: SMI, SARCMI, KOSME, EC-JET, SIMONAZZI, ZAMBELLI, PROCOMAC, ACMI, ATLAS, SIAD, ASKI, SIDEL Built: 1976 – 2012 Plastic Cap Product: Still & sparkling water Capacity: 12 000 bottles/hour Scope of supply: Blower machines Filler Labeller Conveyors Shrinkwrapper Palletiser Compressors Chiller Dryer

4 pcs Bronze guide bush - column die-casting machine, D 250mm, Idra, Oleopress / OP Die Casting, new Special price - You only pay the raw material costs! Price for individual purchase by agreement We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm of the company Oleopress and Idra or for columns of other manufacturers with suitable diameter. Weight appr. 20 kg - Outside diameter 271/278/265mm - Inner diameter 250mm - Tube length 275mm

4 pcs. Bronze collar bushing - column die-casting machine, D 250mm, Idra, Oleopress / OP Die Casting, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm of the company Oleopress and Idra or for columns of other manufacturers with suitable diameter. Weight appr. 20 kg - Outside diameter 278/271mm - Inner diameter 250mm - Tube length 250mm

3- falling stream evaporation system with mechanical re-compression. Previous product: condensed milk from skimmed milk Input: 6,600kg/h, 9%TS Water evaporation: 5,400 kg/h Concentrate: 1,200 kg/h 50%TS System is still complete installed and immediately available. Costs of dismantling and disassembly at the expense by the buyer Equipment is subject to prior saleä!

Pressure number approx. 58 mio. Plus version Alcolor Film Humidifier Baldwin Cooling Straight-on machine Still in production

We offer an extraction system from NESTRO Lufttechnik GmbH. The machine is from 1996, but is currently no longer used. Due to the age-appropriate condition, we recommend a prior inspection of the facility. The system is offered - due to a new purchase from our customer. Particulars: - Manufacturer: NESTRO Lufttechnik GmbH, Hainkirchen - Model: SFN 24C - Year of construction: 1996 - Machine No.:343676/002-98 - Filter area: 240m3 The machine is still in our customer's factory near Leipzig. The sale takes place ex works EXW (loading possibility available). We sell the assets on behalf of our customers. The offer prices are gross prices in EURO ex works. The offers are subject to change, subject to error and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also like to point out that we expressly exclude a return, a guarant ...

Hypoid gearbox, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 4,565 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: TPK+050S-MF3-175-0E1-1S11, I=175, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Free additional flange, see photos - Motor side: Centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: Centring D140mm, pitch circle D168mm x z12, - Additional flan ...

RICO ironing sealer, year of construction: 2001, type 170 (8-14-8), Siemens S7, equipped on 330 ml + 500 ml ironing bottle still in operation RICO Clip lock closer, swing stopper, capper, year: 2001, Type 170 (8-14-8), Siemens S7, adjusted to bottle 330 ml 33 cl, 500 ml 50cl still in production

Supply unit for handheld scanner BCS 302 ex, 17-21BB-0218, Bartec, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. Supply unit in the Ex area for intrinsically safe supply and separation of the data line to the hand held scanner BCS 302 ex. Test certificate Explosion protection type 07-3103-2512/242M Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 3 mon ...

SIMOTICS S Synchronmotor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, new -40% Special price The current new price of a similar product is € 1.761 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - SIMOTICS S synchronous motor, 0.82KW, 1FK7042-2AF71-1CH1, Siemens - rpm 3000 - n max. 9000, - With encoder AM24DQI and brake 24VDC - Smooth shaft D19mm - Incl. connection cable and patch cable 16 or 12m - Connection dimensions: Centring D81mm, pitch circle D100mm x z4, Attention: We have the complete winding drive, rewind drive D75mm and D150mm ...

For sale we have a used Perkins engine in very good condition fits for MF tractors or for other construction machinery or power unit. The engine is still installed in an excavator MF 50 B and can be visited or tested on site. On request, a video of it can be sent. Type number: AD4. 212 ( 4 cylinder diesel ) Condition: very good Engine hours: 1490 h With power steering ( servo pump ) The price is net plus VAT Delivery for 350,-€ is possible. The price is only for the engine !

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

Key data: 1400 mm, 1300 mm, 900 1/min

New price was 110,000 € (200,000 DM) Heavy Duty Lathe Lathe Est Ticino ET-CC 650 Manufacturer: Est Ticino Type: ET-CC 650 Year of construction: 1995 Main motor Siemens: 37kW Control: Siemens (drives), Fagor (display), Omron (PLC) Weight: 9.4t Specifications: Center height 655 mm Center width 1500 mm Maximum turning length 1300 mm Turning diameter over bed 1400 mm Turning diameter via face slide 1050 mm Turning diameter bridge 1400 mm Width of bridge 500 mm Spindle bore 160 mm Spindle speed 3 steps Spindle speed 3 – 900 rpm. Maximum torque 1100 KGM Bed width with double prism 600 mm Bed width with 3rd additional guide 820 mm Length of bed carriage guides 930 mm Width of face slide 420mm Path slide 800 mm Width of the rotatable upper slide 270 mm Travel of the rotating upper slide 400 mm Rapid traverses longitudinal 6 mt./min. Rapid traverses plan 6 mt. ...

Pneumatic rotary drive, DSO-P 50/ 370-BN-P-H-E, Drumag, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. Radial force 1200 N Axial force 1500 N Max operating pressure 10 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and w ...

Intelligent Gas Flow Meter, 5860S/BC1GA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 300 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

Intelligent Gas Flow Meter, 5861S/BD1GA0CA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 100 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

Used spiral kneader with extendable tank car BOKU, type: SK 160 -bakery condition - 2 pieces of kneader and 4 pcs. boiler available - for 160 kg dough or 100 kg flour - Kneading arms interchangeable - Condition good, ready for immediate use The company DIOSNA has taken over the area of BOKU. BOKU dough kneaders are still made. THE service and spare parts offer DIOSNA. Sightseeing and test run are possible by arrangement.

Web guider ElGuider, DRB1402, Erhardt+Leimer, new -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 4.300. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. ELGUIDER - DRB1402 Rotary frame system Profinet with rotary frame DR 1401 in compact version for the control of a running web, with digital position controller and brushless actuator, Control frame for D100 rollers, - Size: Size 2, - Nominal width NB: 250 mm, - transfer length LUE: 250 mm - Sensor: FX 46 ultrasonic sensor, - Incl. existing cables - Sensor adjustment: Manual, Standard, - F ...

Dr. Junghans Medical hot water bottles 7,300 pieces, each with a volume of 0.6 litres, with or without cover - new in original packaging - are offered as follows: 1) 1,600 hot water bottles 0.6 litres, without cover, REF 10128, LOT 43946 2) 2,900 hot water bottles 0.6 litres, with cover red, REF 12128, LOT 43946 3) 2,800 hot water bottles 0.6 litres, with cover blue, REF 13128, LOT 43946 The hot water bottles come from an overstock at our customer. Single item sales from 1000 pieces would be possible by arrangement. The hot water bottles are still in our customer's factory near Leipzig (Saxony). The sale is carried out ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are to be understood as gross prices in EURO ex works. The offers are s ...

Optoelectr. distance sensor BOD002N, BOD 24K-LPI08-S4, Balluff, mint condition -50% Special price The current new price of a similar product is approximately € 900. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 250 hours. Incl. sensor cable with approx. 7m + 5-pin plug M12 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liabili ...

Bühler trough chain conveyor new, still packed in wooden boxes. 18 pieces trough chain conveyor, different lengths and outputs 10 to 60 t/h immediately available Mob. +491715213204

Bühler trough chain conveyor new, still packed in wooden boxes. 18 pieces trough chain conveyor, different lengths and outputs 10 to 60 t/h immediately available Mob. +491715213204

Ex flow sensor, SS 20.600, Ausführung 250mm, Schmidt, mint condition -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 1.840. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. Flow sensor With factory calibration (no accredited calibration) - Type SS 20.600 Mechanical version 250 mm - Through-bolt joint Pressure density DGV - Stainless steel G1/2 Measuring range 0 ... 20 m/s - Calibration Standard calibration Pulse output - Standard 100 Hz, Further outputs, Without communication modules - Explosion protection without application range - For ...

High performance distance sensor / laser, YP11MGVL-P24, Wenglor, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in its original packaging. Technical data: - Measuring distance 75mm - Measuring range 50mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refu ...

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

Gernep labelling machine type Labetta 4 / 3 / 10 640 A year of manufacturing: 2013 capacity: 7.500 bph work direction: right to left rotation: clockwise Stainless steel bottom frame instead off standard carbon steel bottom frame Format parts for: - 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. - 2 different front label format parts 33 cl longneck; - 75 cl Bierre Belge bottle Corked; Neck, front and back label. Air driven glue pumps replaced by electrical driven glue pumps. Introduction wraparound labeler 2020, less wet glue labels since then. Incidental residual wet glue labels ran still May 2022 (remaining stocks) - machine conserved. Machine still in bottle line for conveyor use only, but stilll able to run. The machine is still in production until the mid of November 2023

WMF Presto F fully automatic coffee machine 2.2KW day/120 cups At breakfast, filtered coffee cannot be dispensed with, and it still has many fans in day-to-day business. The WMF Presto F is therefore the ideal tool for businesses that need a larger quantity or a cup of coffee from time to time. Touchscreen - Display Simplest menu control at the touch of a finger on the display. All steps are shown step by step on the display. Ingenious keyboard layout simplest keyboard labeling, you can change the lettering yourself. Height-adjustable spout Containers with a height of 70-190 mm can be filled. Specifications: WMF Presto F Type series 1400 Nominal power: 2.0 – 2.2 kW Daily output of coffee: 120 cups Hot water capacity / hour: 10 liters Capacity coffee bean container Choc container each approx. 500 g (1000 g optional) 1/N/PE - 50/60 Hz / 220-230 V 70 to 190 mm ...

50 Zebra label printers Are sold here Thermal Transfer / Thermodirect as a package Printers originated from insolvency and were still in use until closure

Flow filter, membrane filter housing, MSS 5010 GNW 50BH4, Pall, Stainless steel, used Top Attention! We have set the lowest price on the market for a comparable used part. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - The filter is completely clean and bright. - Stainless steel (316L), - Incl. 5 cartridge filters - Cartridge filter length approx. 52cm - Incl. pressure manometer, - max. operating pressure 10 bar - max. temperature 95°C - 38 x 30 x 127cm high, 30kg, - Product connections in nominal width 50 / dairy pipe thread - high quality pharmaceutical version - for H2O: 10-15,000 l/h, for wine depending on application 1,000 to 2,000 l/h, for spiri ...

9 injection moulding tools for the production of rollers - along with a wide range of accessories As a result of a restructuring of our customer, we offer for sale 9 injection molds for the production of various types of castors for furniture and chair castors, including customer addresses. The pictures represent the basic nature of the different roles. These injection molds could be used to set up a complete production facility for the production of rolls. The basic body of the castors can then be supplemented with various inserts (depending on the customer's requirements) for final attachment to the end product, e.g. a chair. This offer also includes the following accessories - which are part of the production process: • 1 x punching tool (for the roller roller) • 1 x press (for pressing the pins and shafts) • 1 x automatic assembly machine for spring washers � ...

Manufacturer: FUJI Model: Accuaty 1600II LED (hybrid version with tables) Year: 2015 including white and lacquer, including tables for plate printing If applicable, number of prints: 11,229 m2 Availability: May, is still in operation Defects: Light cyan printhead may have to be replaced. Price: on request

TRUMPF TruLaser 5030 Year of prod. 2007. Operational hours laser beam: about 22500 h Operational hours / machine on: about 60000 h Technical condition: good+. Machine under constant service care, all spare parts replaced on time. Recently replaced laser mirrors. The machine is still in production. Control: Siemens 840D Laser power: 5 kW. Maintenance-free turbine TruFlow 5000 Working range: 3000 x 1500 x 115 mm Quality sheet cutting: - black steel up to 25mm - stainless steel up to 20mm - aluminum up to 12mm Equipment: - precise sheet metal burning system - linear drives - conveyor for removing small details and sheet metal remnants - lighting of the working space - positioning laser diode - oil mist spraying - PierceLine system: the function of quick burning into the material, adjusting the laser power to the material being processed. Up to 90% shorter piercing time!  ...

Capacity 160 l, Stainless steel version, with lid Electric heating with temperature controller (30 to 80°C) With limiter 95°C, Outlet valve. With electric cabinet and motor START-STOP With propeller agitator, motor 0.37kW, approx. 300rpm Space requirement 600 x 600 x 1500 mm high, weight approx. 250 kg Already outdated, short-term from stock. (In the photo still with the saline solution for the TEST in the container)

Starter Delko-Remy -Voltage: 12 V -Type: 1108 2 7A 14 -from forklift: Still EFG 1.0/5002 -Teeth: 10 -Dimensions: 305/180/120 mm -Weight: 11.5 kg

transformer -Type: EE 800 -Primary: 380 V -Secondary: 63 V 6.35 A. -Dimensions: 160/130/H180 mm -Weight: 12.3 kg

transformer -Type: EE 355 -Primary: 380 V -Secondary: 220 V 1.45 A/21 - 24 V 1.5 A -Dimensions: 120/100/H130 mm -Weight: 5.3 kg

- Year of manufacture 2009 - Re-Installed and Reconditioned by HP Dealer in 2015 - Impression Counter: 209 million impressions - 7 authorized and installed colours - Inline Priming Unit - Unwinder - Rewinder - Re-Insertion Kit - In-line densitometer - DFE/RIP Hardware: IN100 ML350p GEN8 V2 - DFE/RIP Software: Vers. 5.2.3.0 - HP Software Version 16.3.x - The system is still in HP service contract Technical Specifiations: Printing speed: Up to 30 metres per min. in 4-colour mode Image resolution: 812 and 1.219 dpi at 8 bit, addressability: 2438 X 2438 dpi HDI (High Definition Imaging) Line screens: 144, 175, 180 lpi Max. Web Width: 340 mm Max. image format: 317 x 980 mm Substrate Thickness: 12 - 450 microns Input system: max. roll diameter 1,000 mm Output System: max. roll diameter 700 mm Substrates: Self-adhesive label stock, films, shrink foil and folding cartons  ...

For sale is the following article: Cutting mill Profile mill Möser 30 KW, Throughput: up to 250kg/h (depending on plastic and parts) Manufacturer: Möser Accessories: silo/cyclone, 1 suction blower, 3-4 perforated screens (8-10mm grain size), 2 sets of knives, control cabinet for switching on and off. Complete pipe system More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional Mill is still built and connected to electricity. You are welcome to look at them and try them out. Pick-up by arrangement and dismantling possible promptly.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is the following article: Metal separators for magnetic and non-ferrous metals Manufacturer: - More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional is still set up and connected to electricity. You are welcome to look at it and try it out. Pick-up by arrangement and dismantling possible promptly.

✓ Year of manufacture December 2015 ✓ First installation June 2016 ✓ Impression Counter: 44.7 million impressions (status from yesterday) ✓ 7 colours authorized and installed ✓ Unwinder with max. roll diameter of 800 mm ✓ Priming Unit and Corona Treatment Unit ✓ Rewinder with max. roll diameter of 800 mm ✓ Blanket Automated Replacement System (BARS) ✓ OFIR Kit ✓ PUW Anilox Sleeve High Laydown 3.36 BCM ✓ PUW Anilox Sleeve Low Laydown 2.5 BCM ✓ PUW Rubber Sleeve ✓ Reverse Inspection Bridge (RIB) ✓ Slitting option ✓ HP SmartStream Labels & Packaging Print Server GEN9 ✓ ESKO Version 5.2.3 ✓ HP Authorized Software Version 1.0081.0.0.135 ✓ Machine comes without Chiller Unit ✓ Machine is technically in good condition ✓ Machine is still in HP Service Contract Technical Specifiations: Printing speed: Up to 34 m/min CMYK | Up to 26 m/mi ...

For sale is the following article: Amis Dust Collector Manufacturer: Amis More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional Is still built up and connected to electricity. You are welcome to look at it and try it out. Pick-up by arrangement and dismantling possible promptly.

table length: 3000 mm table width: 1500 mm table height (lateral area): 100 mm weight: 753 kg Siegmund authorized dealer all articles available! Product description The Professional Extreme 3000x1500x100 mm table has a 50 mm hole arrangement Grid on the table top and a parallel hole arrangement in a 25 mm grid the sides. The holes have a diameter of 16 mm and the table one Material thickness of approx. 11.5-13 mm. The table top is made of hardened Tool steel made. The little stressed sidewalls are made For reasons of cost, still made of steel S355J2 + N. Grid lines at a distance of 50 mm make it easier for you to set up your device. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm ...

- Year of manufacture April 2015 - First installation January 2016 - Impression Counter: 38.7 million B2 impressions (status from November 2023) - 7 colours authorized and installed - Pallet Feeder - Drawer feeder - Inline Priming Unit with Anilox Drum and Applicator Drum - Conductivity and Density Meter - Proof Tray / Line coater bridge - Stacker - Tresu iCoat 30000 Coating Unit for water-based and UV-varnish Flood / Spot - HP SmartStream L&P Server GEN8 v5 for 30000 by ESKO - Software Options: Dynamic Barcode, Power Layout and Dynamic Marks, VDP Tools and HP Mosaic Software - ESKO Software Version 5.2.3.0 - Press Software Version 10062.0.0.34 - Customer Uptime Kit 30000 - Light Table - Chiller Unit Model EVO45 - Machine is technically in good condition - Machine is still in HP Service Contract until January 2024 Technical Specifiations: Printing speed: Up t ...

For sale is the following article: Metal separators for magnetic and non-ferrous metals Manufacturer: - More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional is still set up and connected to electricity. You are welcome to look at it and try it out. Pick-up by arrangement and dismantling possible promptly.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Year of manufacture End of 2016 - First Installation 2017 - Second installation at the current owner after reconditioning by Xeikon in September 2021 - Total printed: 8.24 million Printed meters (status from 03.08.23) - Running hours around 5.500 hours - Electrography using Xeikon Cheetah dry toner QB-CH - 5 x High-Precision LED Printing Heads (CMYK + White) - Unwinder Year of manufacture October 2016 - Rewinder Year of manufacture 2017 - Media Width: 200 mm – 330 mm | Printing Area: max 322 mm x 55 m - Media Weight: 40 - 350 gsm (40 - 550 microns) - Speed 4/C: Up to 30 m/min - Resolution: true 1.200 dpi at 4 bit (1.200 x 3.600 dpi addressability) with variable dot density - Substrates: SA or PS Label (Paper, PP, PET, Vinyl, co-extruded film), Paper, Paperboard, Transfer substrate - Digital Front-End X 800 with Control PC and 2 monitors - Xeikon Workflow x 800 Verse 7. ...