steam turbin used for sale

Drums: 3 pieces, top and bottom 2 pieces, with felt covering, center steel roller heated. Roller width: 3150mm, fabric width: 2890mm, heating: steam-heated, accessories: 2 spare rollers not overhauled.

Output: 33,000 bottles/h, connected load: 17kW.

Stock number: U2386-1 Used rotary film evaporator by Corning (UK). Evaporator has 50 l rotating evaporating flask, driven via gearbox with adjustable rotation and el motor 0.37 kW, 1425 rpm, 380 V, 50 hz. Ex design (EExdIIBT4). Heating of flask by coil inside the bath tank - can be used on steam, oil or water. Height of bath adjustable hydraulicaly by manually operated pump. Machine is equipped with two receiving tanks, condensator and all connections. All glass is made by QVF.

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

Supply/exhaust air volume flow: 6500m³/h, total supply/exhaust air pressure: 992/881Pa, heating capacity: 48kW, cooling capacity: 22.6kW, connected load: 8.1kVA, with Hygromatik FLE80-T steam humidifier, pipework, control cabinet, AERMEC WLR 101° water-cooled chiller, condenser, frequency converter, other elements and documentation, on-site inspection is possible.

Farrel Pomini Mixer Type OOC A2 Velocita mixer Steam / water gauges Leeds temperature recorder ISF cabinet

Steam shrinkage tunnel incl. steam generator (without transport conveyor)

REF-407 VVA-300 AUTOMATIC VACUUM JAR SEALING MACHINE This machine with steam injection vacuum-seals round, square or irregular jars (provided that they have two parallel or symmetric sides) by means of a twist-off capping system using VAC-VEM type lids. For different jar types made of glass, PET, etc. The machine is equipped with an automatic lid feeder. The steam system allows its effective injection in order to reach a high vacuum level. The easily adjustable mechanism and the possibility of using the machine at low-speed operation make it possible for the operator to change the jar format and adjust the machine in very little time. This machine is completely made of stainless steel and other materials resistant to the corrosion caused by products used in the canning industry. Technical details: Manufacturer: VV INTERNACIONAL Model: VVA-300 Max. output: 300 jars/m ...

Floor oven electric oven Matadore Store Type: 6.8. M manual control Bottom heat and top heat can be individually controlled for 4 x sheets 600 x 800 mm or 8 x sheets 600 x 400 mm Stove height 17 cm all herds with steam Shelf at the bottom Base frame mobile with locking device Connection 400V, 4 x 8 kW, 4 x 16A-CEE plug Water connection 3/4 inch, water drain DN 40 Dimensions: 930x1332x1540 mm, WxDxH Used oven Visit our large Bakery Machinery Center!

Spiral crate washer from Klotzki Heating medium: Steam 7 bar 170°C Size of crates: L x W x H  / Running direction / Capacity: 300 x 200 x 335 / across / 3600 crates per hour 300 x 200 x 250 / across / 3600 crates per hour 300 x 400 x 240 / lengthwise / 2000 crates per hour Used for crates from 6 1 litre bottles, 24 0,2 litre bottles, and others

The combined cycle plant consists of a gas turbine, waste heat recovery boiler, steamturbine and a generator, mounted in a single shaft configuration. The capacity of the installation is 53 MW • The prime mover of the installation is an aero derivative General Electric LM6000-PB-DLE. 40 MW - 30,000 hours remaining till next major overhaul - Running hours 74.100 hours , start 3356 - Next overhaul in 5000 hours(hot gas path) - Next major overhaul: in 30.000 hours • The Steam Turbine is a SIEMENS ENK40/53-3, with a capacity of 13 MWe. Dismantled, stored and ready for transport.

Leventi ME 1.06 BDI, New condition combisteamer, Following information found on the official Leventi ;, - SmartChef ® – your automatic cooking pilot, - CookTablet ® – Digital Control System, - BlueCycle ® – fully automatic cleaning system, - GreenLabel ® – socially responsible and economical, -, Technical specifications:, - Width: 899mm, - Height: 827mm, - Height (incl. base): 1824 mm, - Depth (excluding door handle): 831 mm, - Weight : 150 kg, - Connection : 3 x 380V (optional 3 x 230V), - Connection value : 9 kW / 13 A, - Water supply : 3/4” outside, - Water outlet (diam.): 50mm, -, General Features:, - CookTablet Android Touch Control, - Memory for 500 programs (15 steps), - BlueCycle cleaning system, - Cool down manually or automatically, - Automatic moisture pulsation, - RackTimer, - HACCP logbook, - Automatic service diagnosis, - Steam: direct injection, - Air Reverse ...

Clever titulator with steam tunnel. 2 pieces available Year of construction 2004 and 2005 Type: GS 501 Capacity: 11,000 fl./h > 18,000 fl./h

A Krones glass bottle filling line Equipped with a bottle vacuum system Performance today. 14,000 bottles of wine per hour Type filler: K 323-152, year of construction 2000 Bloc formation mechanically with a Krones Rinser machine Variojet Type K 562-235 with motorized higher adjustable filler upper part and with manual locking for VK- VKS- VC- VVHL and VVHK filling system 7 different wine bottles were bottled (Sample see photo) with manual cullet and filler exterior spraying, manually controlled. with disinfectant spraying device for vacuum fillers with 2 nozzles including control with set of sterile air filters with steam sterilization unit Rinser Medium 1: Water, temperature 50 to 55 °C with collecting tank with circulation pump, equipped with Container Level Control and Temperature Monitoring Medium 2: with saturated steam heating Medium 3: Sterile air with 2 ...

Key data: 1200 , 800

Clamping table in absoult as good as new condition! (Distort pictures, but table is straight!) The table comes from the area of a turbine assembly and is in top condition! Metrics: Width 1.200mm Depth 800mm Height 800mm Weight 700kg Number of T-slots 7 pieces T-slot table

Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 - Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturers plate 2 - Fan n?1 Manufacturer: Kiekens Model: 8 KTEN 355 Year : 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80?C Atex : yes Ex II 3D/G td nA 3 - Fan n?2 Manufacturer: Kiekens Model : 8 KTEN 28 ...

A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Equipment layout plan + cip system . pdf 1 Glatt GC 750/500 coating unit - drive motor : 1,1 kW - 380 V - 50 hz - IP 54 - Ex - air inlet fan : 1000 m3/h - 6860 rpm - 2003 Pa - Max 80?C - 1,1 kW - IP 54 - air outlet fan: 1200 m3/h - 2900 rpm - 1030 Pa - Max 80?C - 7,5 kW - IP 55 - Drum speed: 2 - 18 rpm - Sold with two perforated drums ?500mm and ?750 mm - Adaptable 2-head spray arm + Peristaltic pump - Spare parts, seals, ... - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Extraction air volume: 1200 m3 / h 1 Air treatment unit 1 Wanson CD-36 steam boiler - Power: 36 kW - Steam output: 48 kg/h - Operating pressure: 5 bar - Temperature : 159?C - Water volume: 10 L  ...

Tubular heat exchanger mounted skid allowing to thermoregulate (heat, cool, maintain) a heat transfer fluid via a secondary circuit with 3 entries. Very often associated with a filter dryer or reactor when there is an issue / risk of product contact. Primary circuit : Heat transfer fluid loop Volume: 3.5L Pressure: +6 bars T?C = 150?C Secondary circuit : Number of inlets: 3, with one loop dedicated to steam Volume: 14.5L Pressure: -1/+6 bars T?C = 150?C Steel extension vessel Pump 15 m3/h Year 2006

Explosion proof motor 3 KW (ADF / ATEX: EExdellCT4) 2870 rpm IP 55 Turbine D.125 Volume, max. with H2O): 5000 l Viscosity, max. 15000 mPas Process pressure (max.) 0 bar Vacuum, max. 100 mbar Process temperature, max. 120 ?C Mixing tools Propeller Motor power, standard 3 kW Shaft size D.40 X L.1000 Weight approx. 42 kg New sealing cartridge installed (seals, ...) The IKA ROTOTRON? RT is an all-purpose jet-flow agitator used for homogenizing, dispersing, suspending, emulsifying, aerating, dissolving and improvement of heat transfer. The RT is most effectively used for tasks ranging between that of a conventional stirring machine and a dispersing machine with a rotor-stator system.

Manesty ? ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP sy ...

Equipment used for coating of food or pharmaceutical products. Non-tilting stainless steel turbine 2 liquid spraying ramps / 2 powder spraying ramps Complete installation with : - 2 x interchangeable spraying / coating arms including each: 1 liquid spraying ramp with double heating jacket + 1 powder spraying ramp. - Accurate unit dosing powder (screw system) - Galvanised steel frame / mobility rail for the 2 spray arms (easy switching) - Lateral unloading trolley - Ventilation / air treatment unit - 8 weights / scales on the feet - Electrical cabinet - 500 litre melting tank skid Max. load 3000 kg One-sided loading, Central unloading with reverse rotation Length 8 m x diam. 2.2 m + Documentation and drawings available

In-store oven Miwe Aero 4.0604 / 4.0604 Used in-store ovens Miwe Aero DUO with proofer for sale, we have 8 pieces of this oven in stock. Miwe Aero 4.0604 DUO -2 pieces of 4 ovens on top of each other -per oven for 4 sheets 60x40cm -with Miwe FP control -with proofing cabinet -with steam capacitor -Door hinge left -17 kW -Year of construction 2007 -External width : 90cm height 231cm

Complete welding fume extraction for 7 places with filter, extraction, silencer, The system was purchased for training purposes, installed and never put into operation. Plant cost well over 50,000 euros. Extraction ( turbine ) RE71-500-1-D/2/11,0/RDO/2900 9.9kW Filter AIR RECEIVER The system is sold complete with pipe system.

Deck oven Miwe Condo CO 3.0806 -Floor oven stone slabs oven -Miwe Condo -3 floors each 80x60cm -each floor with separate control -each floor with separate steam box -each floor can be controlled separately with top and bottom heat -each floor with exposed glass door -Floor entrance height 17cm -Program memory -with base -with exhaust hood -Year of construction 2013 -400/230V 3N/PE External dimensions approx. 110x112x232cm WxDxH

Deck oven Miwe Condo CO 5.1208 Bakery oven Electric -5 floors each 120x80cm -each floor with Miwe FP control -each floor separately controllable -Top and bottom heat can be controlled separately -each floor with separate steam function -with proofing cabinet -with steam capacitor -with exhaust hood -Floor entrance height 17cm Internal height 16cm -Power: 49,1 kW -Year of construction 2010 -External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

Floor oven Friedrich E6 8/6 bakery oven - 6 floors each 80x60 cm - each floor can be controlled separately with bottom and top heat - each floor with separate steam box - each floor with glass viewing glass - with exhaust hood incl. fan -digital control - Floor flaps are made of glass (visible) - Floor entrance height approx. 12.5 cm - Exhaust hood protrudes 22cm at the control - per floor 3,3kw all together 19,8 kW

Batch oven Wachtel Piccolo I-4 with proofer - 4 floors each 60x80cm - each floor with separate control - Top and bottom heat can be controlled separately - each floor with separate steam box for generating steam - with automatic night start function - Control strain gauge - with proofer - with exhaust hood - Oven and proofer with water connection for steam - Floor height: 165mm - External dimensions: 97cm wide and 130cm deep - Height is adjustable - Year of construction 2011 - 21.7 kW - Voltage : 400V AC/3Ph/N/PE/50Hz External dimensions: Width : 97cm Depth: 145cm (hood still protrudes 45cm) Height: 225cm (can also be higher by setting the rollers higher)

Complete 96 MWe gas fired black start/ peak load power station, consisting of 4 (four) GE Frame 5N Gas Turbine Sets 24 MW each. Each set consists of a: • Gasturbine • Generator • Diesel Engine • Main Gearbox • Auxiliary Gearbox • Speedtronic Mark II control system • Exhaust plenum • Air inlet filter house 125 MVA transformer With or without building. additional info on request.

Standard configuration Machine ? Solid machine frame with integrated laser resonator ? Feed station with self centering clamps ? Automatic tube support for raw material ? Feeder claws with self centering parallel collet chuck ? High-precision motors: Digital 3-phase servo motors with high precision of the drive axes. ? Part removal station PRS 3001 with brush table, finished parts up to 3000 mm long ? Tube support for finished parts with wheel-away guide rollers ? Enclosed beam delivery ? NitroLine ? FocusLine ? SprintLine ? Laser power control ? Programmable cutting gas pressure ? Automatic shutdown device ? Work area lighting TRUMPF laser ? CO2 laser TruFlow 2000 ? Radio-frequency excitation ? Maintenance-free radial turbine blower ? Laser control TASC 3 ? Laser log book function ? Chiller Cutting head ? Laser cutting head with 155 mm (6?) lens ? ControlLine Control ? Sinumerik ...

used confectionery oven Friedrich E4 8/6 GS C, in baker's condition, good condition, 4 levels, for trays 80 x 60 cm, with cooking chamber and steam condenser, with computer control, power of the baking chambers 13.2 kW in total, power of the control 1 kW, power of the cooking chamber 2 kW

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Gantry drive in combination with direct linear drives ? Automatic pallet changer ? Longitudinal conveyor for small parts / slag ? Enclosed beam delivery system ? 19? Touch screen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning Trumpf Laser ? New generation CO2-Laser TruFlow 6000, energy-efficient ? Maintenance-free radial turbine blowers ? Radio-frequency excitation ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device UTI ? LensLine with status control ? ControlLine: Height regulation and sheet edge sensing ? Lens with RFID-chip Control ? Easy shopfloor programmi ...

The labeller Krones Sleevematic and the Shrinkmat were manufactured by Krones the Sleevematic was built in 2006 and Shrinkmat in 2008. Till now the machines were used in a beverage company in Lithuania .The documentation is available. Cijts0xm8g Tech Specs: Capacity: 14,400 bph Control: Siemens S7 Two Machines Sleevematic and Steam shrink tunnel included

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Gantry drive in combination with direct linear drives ? Automatic pallet changer ? Longitudinal conveyor ? Enclosed beam delivery system ? One cutting head strategy ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 6000 with optimized stand-by mode ? Maintenance-free radial turbine blowers ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device UTI ? LensLine with condition checking ? ControlLine: Height regulation and sheet edge sensing Control ? SIEMENS Sinumerik 840D ? Technology data is integrated ? Colour screen ? Automatic shu ...

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Single cutting head strategy ? Chiller ? Automatic pallet changer in longitudinal direction ? Conveyor belt for small parts / slug ? 17 Touch screen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2 laser TruFlow 5000 with optimized standby including beam guidance ventilation with N2 ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC ? Laser power control ? Logbook function laser Cutting head ? Lens cutting head with 250mm focal length ? Universal quickchange device for cutting head (UTI) ? LensLine with status check ? ControlLine: automatic height contr ...

Standard Configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Chiller ? Automatic pallet changer lengthwise installation ? Longitudinal conveyor ? 17 touch screen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 including NitroLine, with optimized Standby Modus ? beam tube purge with nitrogen ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser ? Laser cutting head ? One cutting head strategy ? LensLine with status check ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) ? ControlLine: Height regulation and sheet edge detection Contr ...

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 with optimized standby ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? LensLine ? ControlLine: Height regulation and sheet edge detection  ...

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 5000 with optimized standby, purged with nitrogen and LensLine ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? ControlLine: Height regulation and ...

Sample filling system for motor oils in 20 litre canisters. Generally suitable for different liquids (high or low viscosity) into large containers, canisters. The filling quantity is controlled by a weighing sensor. High accuracy due to slow filling speed with still relatively high output compensated by two filling heads. Can be equipped with a steam sterilizer. Mitsubishi PLC, WIENVIEW Touch-Monitor, sensors from Sick. -Specifications: Filling range: 5-25kg | speed: up to 250 containers/hour | accuracy: = +/-0.3%. Number of filling heads: 4 | required compressed air: 4-6 bar. Filling volume and filling range can be customized, whereby performance and price can vary. The final specifications depend on customer requirements. Please provide us with your details so that we can prepare a complete quotation. Please note that our new prices are often below the usual used prices. Please feel fr ...

Sample filling system for low viscosity products (ketchup, jam, sauces, etc.) into bottles, glasses, cans. Including container unscrambler, rolling bottle/container rinser, viscosity filler (hot filling, steam filling), vacuumize jar capper. - Specifications: filling volume 20-1000ml | bottle size range: diameter 20-150mm, cap diameter: 20-70mm | 4-12 filling nozzles allowing speed s of up to 6000 bottles/containers per hour | tolerance of filling quantity: +/- 1% | yield of capping: < 99% | 380V, 3.5kW, 0.6m?, 6bar. - Please note: These are specifications for a sample system only. The final specifications will vary. Please give us your packaging details (container size, shape, filling product, required speed , etc.) to prepare a full quotation for you. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Us ...

Key data: 825 , 975 , 400

Steam turbine Generator CCC CFR 3 G5 780 KWe x 1,500 rpm 50 Hz 400 V Turbine backpressure Manufacturer KKK Model CFR 3 G5 P drive [KW] 780 Vapor pressure [bar] 39 - 48 / 43 norm Exhaust pressure [bar] 7 - 9 / 7,85 norm Generator Manufacturer AVK Model DKBN 100M/1100-4 P Generator [KVA] 975 Revolutions [per min] 1,500 Voltage [V] 400 Current [A] 1,407 Scope of delivery: The genset consists of the turbine and the generator. Technical documentation: available Spare parts / tools: not available The genset was dismantled in a working condition Sale takes place "as is" or after prior inspection on request, FCA free.

Inv. Num. : 6410 Type: DBS-200RCS Producer: S.A.F. Created: 2012 Parameters: Machine dimensions: 11.5 x 5.15 x 3.86 m The line consists of: - Blasting chamber - Dust collector OP 9 - Blowgun - Exhaust fan - DONALDSON TORIT filter cartridges -Lift - Two-stage abrasive cleaner - Summary conveyor belt - Electric control panel with control panel - Compressor ALMIG BELT 37-8 - Automatic steam trap Bekomat 13 - Compressor BELT 4-37

10lt vacuum turboemulsifier. Used to mix emulsions with a liquid or creamy consistency for the skincare, make-up, supplements and healthcare markets, in the pharmaceutical, nutraceutical and cosmetic sectors. Equipped with: - sunroof by electric lifting - tipping tank equipped with jacket for cooling and heating by means of heating elements - AISI Stainless Steel 304 material - Parts in contact with the product in AISI 316 - turbine with adjustable speed via inverter placed on the bottom of the tank - adjustable speed mixer - liquid ring vacuum pump

WFI plant Manufacturer Finn Aqua Type 500-H-6 Capacity 1100-1200 l/h WFI water Steam inlet pressure 4.6 bar

SPECIFICATIONS: Hydraulic press for bent elements Dimensions of the work table mm: 2500 x 1300 Number of pistons: 4 diameter Ø 100 mm Piston stroke mm: 1500 -Enclosure -Control box -Oil pump - 2 steam outlets

SPECIFICATIONS: Hydraulic press for bent elements Dimensions of the work table mm: 2800 x 1400 Number of pistons: 2 diameters Ø 120 mm Piston stroke mm: 1500 -Fence -Control box - 2 brackets for lifting -Oil pump - 2 steam outlets

SPECIFICATIONS: Hydraulic press for bent elements Dimensions of the work table mm: 3000 x 1600 Number of pistons: 2 diameters Ø 200 mm Piston stroke mm: 1400 -Fence -Oil pump - 02 Steam outlet openings

Used bottle washer manufacturer: Klinger / Austria Year of construction: 2000 / General overhaul in 2010 at the Klinger Austria plant Type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Control: Siemens S7 Total operating hours: 17,443 hours Net weight: approx. 18,000 kg Steam heated Can be used for bottles: Volume: 200ml - 1.000ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm The bottle washer has so far been used for: 330ml Longneck 500ml Longneck 330ml swing top bottle 500ml swing-top bottle

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

1 of used sleever, make Fuji Seal Europe, Intersleeve 3200 DE, new 2000. Siemens S7 controls (with upgraded applicator controls). Steam-tunnel. Last sleeving 500 ml PET bottles at a speed of 21.600 bph.

SECOND-HAND STAINLESS STEEL STEAM BOYLER MM. 1400X600