star hob used for sale

CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.

Komsomolec 5K328A Gear hobbing machine Max. work piece diameter 1250 mm Max. work piece diameter with support 850 mm Table diameter 1000 mm Module 12 Max. table load 2000 kg Min. number of processed teeth 20 Max. length of processed teeth mm: - straight 560 - 30 degrees angle 400 Main drive power 10 kW Machine dimensions 3560x1790x2590 mm Machine weight 14000 kg

Gear hobbing machine STANKO 5B312 with change gears.

Key data: 250 , 400 , 10

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

max diam 340 , max modul 8

Key data: 3000 mm, 32

1 CNC Gear Milling Machine Make: Gleason-Pfauter Model No.: P2001/3000 Year of manufacture: 1980 / Retrovit 2000 Largest milling diameter: 3000 mm Largest module: 32 Face plate diameter: 1920 mm Power main drive: 30 kw. max. workpiece weight: 25 tons. Equipment / Accessories: CNC control made by Siemens Internal gear milling head Setting Stick - Counter Holder Workpiece fixtures Interchangeable wheels various milling cutters various cutter mounts Conveyor

Gear hobber sharpener Kapp AS 305 B

Inv. Num. : 7169 Type: RM 80 Producer: Wera Created: 2002 Parameters: Operating system: SIEMENS SINUMERIK Maximum gear diameter: 80 mm Machine weight: 3500 kg

GEAR HOBBING MACHINE MAKE: KARATS MODEL: GH-20H YEAR: 1984 Specification : Table dia. : 2000mm (Bore dia.: 300mm) Max. dia. : 3000/4300mm (HOB/SINGLE) Max.Module: M30/35 (HOB/SINGLE) Max.dia of hob: 380mm Max.Length of hob: 510mm Machine size: 7000 x 4100 x 4300 (L x W x H) Weight: Approx 45Ton

Wanderer 31 L500 Screws & Thread Milling Machine -Workpiece length max. 500mm -Oscillating range above bed approx. 400mm -Spindle bore approx. 80mm -Speed range 55 - 250 rpm -Work light -Interchangeable wheels (see range) Dimensions: LxWxH 2.5x1.4x1.6 meters /Weight 2600Kg Errors / input errors excepted Coqznl9t

Description: Various spare parts for Koepfer 140 gear hobbing machines Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm, weight approx.: 75 kg

Description: Technical details: Wheel diameter - max. 406 mm, wheel width 420 mm, module - max. 4.3, module - min. 0.5, cutter speeds 49 - 246 rpm, table bore diameter 80 mm, total power requirement 7 kW Approx. Onsite Dimension. (l x w x h): 2,800 x 1,600 x 2,200 mm, weight approx.: 3,500 kg

Description: FETTE hobs with shank GREASE 2356808 GN461 DIN3968AAA 002.90 2697.1 02 m³ L1 E= 20° DIN3972 I - Stgs. 1°24 pz9.4276 HN PM3 Approx. Onsite Dimension. (l x w x h): 500 x 200 x 200 mm, weight approx.: 10 kg

Induction hob SAMSUNG NZ64B47016FK, 7.400 W, original packaging opened, has been ordered for exhibition

Induction hob CASO CI6 FB 7227, 7.4 kW, original packaging

Induction hob CASO CI6 FB 7227, 7.4 kW, original packaging

Induction hob CASO CI6 FB 7227, 7.4 kW, original packaging

Induction hob CASO CI6 FB 7227, 7.4 kW, original packaging

Description: Saazor hob, DP 6, inner diameter 32 mm weight approx.: 2 kg, Approx. Onsite Dimension. (l x w x h): 105 x 105 x 110 mm

Description: Gear hobbing cutter, Module 15 R1 EA 126 DIN 3968 A DIN 3972 II E-W. 20 ° c. 4 ° 21` HSS-E Frst. 33.75 Approx. Onsite Dimension. (l x w x h): 230 x 230 x 210 mm, weight approx.: 40 kg

Description: max. module: 8 mm table diameter: 370 mm largest diameter of the machined wheel: 400 mm rated power: 35 kVA chip conveyor  , equipment: shift wheel cabinet set of shift wheels shanks for mounting cutters - 5 pieces milling stands pins mounting sleeves claws for mounting pins technical and commissioning documentation and user manual in Polishwiring diagramsworm cutters  , , dimensions: installation dimensions: ,3300 x 2850 x 2300 mm transport dimensions: ,3150 x 2000 x 2300 mm control cabinet: ,1000 x 400 x 2300 mm 3 x Euro pallets with equipment: ,1200 x 800 x 500 mm tool locker: ,1000 x 650 x 1200 mm  , with equipment for cylindrical gears  , the offer does not include other elements of machines, devices and tools that are not related to the machine  , please also have a look at the videos and  ...

Description: serial number: 29660 control: SIEMENS Sinumerik 840D  , travels: X-axis: 160 mm Y-axis: 220 mm Z-axis: 350 mm max. tool diameter: 130 mm milling head swivel angle (A-axis): +/- 45°  , workpiece table: outer diameter: 200 mm clamping diameter: 150 mm bore: 45 mm max. table speed: 1000 rpm  , milling head: , drive power: 11.5 kW max. module: 3 mm max. milling cutter speed: 4000 rpm max. head circle diameter of the milling cutter: 100 mm max. cutter length: 317 mm max. cutter length (toothed): 240 mm  , rapid traverse: X-axis: 20 m/min. Y-axis: 10 m/min. Z-axis: 7 m/min.  , connected load: 40 kVA  , including: ASTOS DML200/1576/1340 Chip Conveyor, YOM: 2006, weight: 150 kg RELEN UC Compact 1 Extraction Filter, YOM: 2006, power: 0.57 kW, rotational speed: 2750 rpm, air supply 1200 m3/h  , witho ...

Description: Complete tool cabinet with 5 drawers, filled with various hobs in different sizes and modules, hobs for spur gears & helical gears, hobs for splined shafts, hobs for serrations, hobs for sprockets, hobs for toothed belt wheels, form cutters for gears, form cutters for worms, form cutters for splined shafts, etc ., weight without cabinet approx. 565 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 640 kg

Description: Control type: conventional, technical details: tool holder MK4, tool diameter max. Ø 145 mm, table size L: 800 x W: 700 mm, clamping surface Ø 300 mm, table travel 200 mm, division max. 5 module, total power requirement 7.5 kW, machine weight approx. 4.9 t, space requirement approx. 2.8 x 1.5 x 2.3 m, additional information: Application: Gear hobbing machine for gearing straight and helical spur gears, worm gears as well as rollable profiles, cycle milling and individual milling as well as counter and synchronous milling , Information on the machining of spur and worm gears: -Outside Ø max. 250mm with counterholder -Division max. 5mm (module), -Tooth bevel max. 45°, -Tooth width max. Axial milling 200mm and radial-axial milling 240mm, -Milling width max. clamping table counterholder 655mm, milling slide: -swivel 210°, -travel path 350mm, -feed, 2 directions, 16 steps in ...

Description: Gleason-PFAUTER CNC Hobbing Machine for Gear Cutting of cylindrical and worm gears up to 2.4 m in diameter. Designed for internal milling Control system SIEMENS Sinumeric 840 D Working area Workpiece nominal diameter: 2000 mm Largest millable diameter: 2400 mm Distance between milling cutter and workpiece axis min./max.: 300 / 1400 mm Axial slide path max.: 1600 mm Radial slide path: 1050 mm Hob cutter length max.: 375 mm Hob cutter diameter max.: 350 mm Milling head Swivelling range: + 30 / -45° Cutter arbour taper: HSK-B160 (hollow shank taper according to DIN 69063) , Max. milling cutter displacement: 300 mm Nominal module hobbing approx.: 20 mm Nominal module tooth form milling approx.: 30 mm Internal milling head IFK2 , Workpiece table Table diameter: 1870 mm Table bore: 600 mm Chip removal through table bore Please take a l ...

Description: Gleason-PFAUTER CNC Gear Hobbing Machine for gear cutting of cylindrical and worm gears up to 1.2 m in diameter. , Control system and Machine number Control: SIEMENS Sinumeric 840 D Machine number: 30 190 Working area Workpiece nominal diameter: 1200 mm Axial slide path max.: 1000 mm (special version) Radial slide path: 800 mm Hob cutter length max.: 500 mm Hob cutter diameter max.: 450 mm Milling head Swivelling range: + 30 / -45° Cutter arbour taper: HSK-B160 (hollow shank taper according to DIN 69063) , Max. milling cutter movement: 450 mm Nominal module hobbing approx.: 25 mm Nominal module for tooth form milling approx.: 35 mm Workpiece table Table diameter: 1200 mm Table bore: 300 mm Please take a look at the t echnical data and layout plans in the PDF file . Travel of counterholder: 900 mm, module min./max.: max. 35, control: SI ...

Description: Gleason-PFAUTER CNC Gear Hobbing Machine for gear cutting of cylindrical and worm gears up to 1.2 m in diameter. , Control system and Machine number Control: SIEMENS Sinumeric 840 D Machine number: 30 024 Working area Workpiece nominal diameter: 1200 mm Axial slide path max.: 1000 mm (special version) Radial slide path: 800 mm Hob cutter length max.: 500 mm Hob cutter diameter max.: 450 mm Milling head Swivelling range: + 30 / -45° Cutter arbour taper: HSK-B160 (hollow shank taper according to DIN 69063) , Max. milling cutter movement: 450 mm Nominal module hobbing approx.: 25 mm Nominal module for tooth form milling approx.: 35 mm Workpiece table Table diameter: 1200 mm Table bore: 300 mm Please take a look at the t echnical data and layout plans in the PDF file . Travel of counterholder: 900 mm, module min./max.: max. 35, control: SI ...

max. wheel diameter:80 mm max. module:3 total power requirement:25-35 kW weight of the machine ca.:10 t workpiece weight:15 kg workpiece length - max.:-50+450 mm table diameter:145 mm diameter of hob:90 mm cutter length max.:220 mm hob turning speeds:1.000 U/min

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

max. wheel diameter:1500 mm gear width:600 mm max. module:16 min. module:1 total power requirement:38 kW weight of the machine ca.:18,7 t dimensions of the machine ca.:7,7 x 3,6 x 4,5 m m Retrofit in 2004, original from the 80s No internal hobbing device

max. wheel diameter:90 mm gear width:300 mm max. module:3 tip circle diameter:max. 65 mm root circle dia. min.:28 mm max. geared Length:150 mm tool length - max.:203 mm tangential ( y-axis ):140 mm axial ( z-axis ):400 mm Tailstock ( z²-axis ):350 mm loading and unloading portal ( z³-axis ):1850 mm milling head -swivable +/-:+ A = 40 / - A = 40 ° working piece table: max. outer diameter / bore hole:120 / 45 mm feeds X-axis:1 - 10000 mm/min feeds Z-axis:1 - 10000 mm/min rapid power traverse in X-and Z direction:10000 m/min rapid motion - y-axis:5000 mm/min fast rapid z²-axis ( tailstock ):10000 mm/min. speeds of tool:300 - 4000 U/min working piece table speed:0 - 1000 1/min. connected load:44 kVA voltage:400 V control voltage:24 kW weight of the machine ca.:7500 kg dimensions of the machine ca.:3170 x 2975 x 2440 mm

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024

max. wheel diameter:130 mm max. module:3 total power requirement:15 kW weight of the machine ca.:6 t dimensions of the machine ca.:2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm 2500 mm 2170mm Accessories : Hydraulical workpiece clamping ...

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

WEINIG planer and moulder model Unimat 22 A Equipment: - Package - Lifting table (no pit required) - automatic stacking strip removal - Rubberized inclined conveyor - Rubberized separation - Longitudinal conveyor for planing.- Moulder - Unimat 22 A with soundproof cabin - 2nd operating unit - Manual acceptance Weinig Planer.- Automatic throat machine, technical data: Spindle arrangement: U - R - L - O - U Saw Working width: 220 mm Working height: 120 mm Motor power feed: 4 kW Motor power of the working spindles: 4 kW Speed of the working spindles: 6000 rpm. Diameter of the working spindles 40 mm Feed infinitely variable 6 - 32 m/min Diameter of feed rollers (hardened) 140 mm Space requirement line: 12.7 x 5.0 m Spelling mistakes and errors excepted

Machine Type: Table Lathe Manufacturer: BERNARDO Model: Hobby 300 VD Year of construction: 2011 Condition: very good Offer Type: Used Machine Specifications: Center height: 90 mm Center width: 300 mm Spindle bore: 18 mm Speed range: 0 – 2500 rpm. Propulsion: 0.4 kW / 230 Volt Remark: infinitely variable speed control, Three-jaw chuck Ø 80 mm with interchangeable jaws, Auto. Feed / Thread, Digital display longitudinally and transversely, Moving grain tip, Quadruple steel bracket, Various turning steels Weight: 38 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

-Hobbing press -Make: Sack & Kiesselbach -Type: 500 Mp -Mach.No: 30407 -Capacity: 500 tons -Width between uprights : 420 -Daylight: 370 -Stroke: 340 -Clamping surface : Ø 500 -Closing speed: 100 mm/s -Pressing speed : 1.8 mm/s -Opening speed: 200 mm/s -Power -Dimension: -Weight 3.25 + .330 -L x W x H: 2.245 x 1.8 x 1.17

Perfector 2/2, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Cooling Refrigerator, Auto-Wash, Roland Mabeg Jet Feeder, Steel Plate on Overlap, Steel Plate on the Lining, Non-Stop Device, Super Blue, Bacher Registry System Quick Bars, Powder Sprayer, High Pile Delivery, Capacity: 15000 Sheets/h, Paper Thickness: 0,04-0,6mm, Max Paper Size: 53x74cm, Min Paper Size: 26x40cm, Start of Print: 9.5-10.5mm, Plate Format: 605x745, Plate Thickness: Max 0,3mm, Standard Accessories)

Spiral kneading machine for gastronomy, amateur or hobby baker NEW

Manufacturer: Werkzeugeinstellgerät, Type: für Hobelköüfe, Year: Eispannlänge 450 mm, FREETEXT1: 40 mm Wellendurchmesse, Year :Eispannlänge 450 mm

R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement

8-color format: 1270 mm<br><br><br><br<br>br>

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

Turbine Operating Hours of Turbine: 30.000h Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW, Revolution number: 23000 U /min, Live steam pressure: 65 bar, Live steam pressure temperature: 480 °C, Evaporation pressure: 1-17 bar, Investments in the year 2002 , Entire steam transforming station from 63 bar to 2,5 bar in the year 2002 renewed, El. Generator Fa. Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA, renewed, Entire measuring -, governing and control of the turbine renewed, Steam turbine renewed with Energy Production Installed boiler efficiency: Boiler I , Hard coal, Steam generation: 20 t/h, 63 bar, 495 °C Boiler II , Hard coalr Steam generation: 13 t/h, 34 bar, 425 °C Boiler III: , Combination burner for oil and gas, Steam generation: 20 t/h, 17 bar, 285 °C General overha ...

Farrel Bridge model 3D Banbury internal mixer, Machine no. 85R6001, May 1985, Chamber capacity: approx 65 litre net. 2 wing rotors, Roller bearings, FYA Seals, Drop door discharge with power pack, Pneumatic hopper, Standard Bullwheel/pinion drive, With Brush 200HP slip ring Motor, 981rpm, 3ph, 50Hz. Complete with oil immersed starter etc. Previously used on PVC

Sisu/Valmet Engine Type=612DSE,135KW,new factory repair Replacement motor with starter+alternator,new,TOP condition 1 year warranty ! email=info@miw-zeven.de

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...