stacking station used for sale

Voltage: 230V, current: 2A.

There are two identical erecting stations available, connected load: 7kW, with documentation.

We offer two pieces of MWM TCG 2020 V12 for sale. Specifications Engine: MWM Type: TCG 2020 V12 Power: 1235 kW Year of construction: 2012 Generator: Marelli Power: 1850 KVA Voltage: 400 V Operating hours: 65,000 h

Key data: 480 , 600

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, control panel, complete.

Key data: 330 , 413

Liebherr gas generator in good condition. It has the following specifications: Manufacturer: liebherr Fuel: Gas Manufacture year: 2013 Kva: 413 Kw: 330 Other specs: 8 cylinder, Control panel included. Complete.

Width 68 cm Year of construction: 2019 2nd station: 2 folded pockets 68 cm downstream knife shaft Delivery date: immediately Price on request. We deliver and install worldwide!

electricity and heat generators from 1997, complete 1 available 52 KWel x 1,525 rpm, 400 V/50 Hz with AC asynchronous generator Manufacturer: Deutz Model No.: WUDF225M Type: Gas-fired CHP Serial Number: 07908941 Power [kW]: 52 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 89 Speed [1/min]: 1525 Year of construction: 1997 Weight [kg]: 2.250 Dimensions LxWxH [cm]: 220x95x215

Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...

Diesel filling station - Home filling station - Gas station - Small filling station composed of: 1 x 20m³ storage container - brand new 1 x fuel dispenser type eco 75 - brand new Description steel tank: 20,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight app ...

Jenbacher CHP, nat gas, 1127 kWe, 50Hz, 400V, YOM 2006, Stamford generator, 1770 kVA, Diane XT control, operating hours 78000. options; sound enclosure, exhaust gas cleaner Hanwel, exhaust gas heat exchanger (2x),silencer, chimney.

MWM 2020V16 in container, 1560 kWe, yom 2010, operating hours 16000 on nat gas, 37000 on biogas, generator MJB 500 MC4 B20. 400 V, 50 Hz, 2300 kVA, circuit breaker, nat- and biogasline, exhaust cilenser, 2 x table cooler, all related documentation. option; steam generator Approvis. perfect running condition

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -stable execution -electrically driven -Drive motor roller conveyor: 0.37 kW 71 rpm -Drive motor conveyor belt: 0.37 kW 88 rpm -Roll width: 1440 mm -Conveying length: 1400 mm -Transfer of conveyor belts: 1400 mm -pneumatic lifting -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 950 mm adjustable -driven: via toothed belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -stable execution -electrically driven -Drive motor roller conveyor: 0.18 kW 71 rpm -Drive motor conveyor belt: 0.18 kW 88 rpm -Roll width: 1440 mm -Conveying length: 1550 mm -Transfer of conveyor belts: 1400 mm -pneumatic lifting -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 950 mm adjustable -driven: via toothed belt -Number: 1x roller conveyors available -Price: per piece -Dimensions: 1550/1650/H950 mm -Weight: 420 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -stable execution -electrically driven -Drive motor roller conveyor: 0.37 kW 71 rpm -Drive motor conveyor belt: 0.18 kW 88 rpm -Roll width: 1440 mm -Conveying length: 1550 mm -Transfer of conveyor belts: 1400 mm -pneumatic lifting -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 950 mm adjustable -driven: via toothed belt -Number: 2x roller conveyors available -Price: per piece -Dimensions: 1550/1650/H950 mm -Weight: 420 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -stable execution -electrically driven -Drive motor roller conveyor: 0.37 kW 71 rpm -Drive motor conveyor belt: 0.37 kW 88 rpm -Roll width: 1440 mm -Conveying length: 1400 mm -Transfer of conveyor belts: 1400 mm -pneumatic lifting -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 950 mm adjustable -driven: via toothed belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

- Producer Infastaub - Year of construction 1997 - Type AM 303 - max. volume flow 4.000 m³/h - Blowing nozzle Saugstutzen 250 mm - automatic uprock - Number of Filling tons 1 Stk. - Electric power, Ventilator 2,8 kW - Motoractivity Rockmotor 0,18 kW - Length 950 mm - Height 3.000 mm - Width 1.000 mm - Location am Lager - Voltage / HZ 400/50 - Spannungsschwankungen max. +/- 5 %

Multi-station distributor, busplate PARKER series MSP MSP1D23BA910 Connection size: A + B: G 3/8 , P + T: G 1/2 Operating pressure: max. 350 bar Spare part for HECKERT CWK400 D machining centre, among others ! used ! Dimensions ( without connectors ): 70 x 70 x 70 mm Dimensions ( complete ): 95 x 90 x 70 mm

Multi-Station Distributor, Collective Terminal Plate PARKER Series MSP MSP4D23BA910 Connection size: A + B: G 3/8 , P + T: G 1/2 Operating pressure: max. 350 bar 8x stud bolt M5 x 120 mm, with screw 4x stud bolt M5 x 80 mm, with screw 4x stud bolt M5 x 70 mm, with screw spare part for machining center HECKERT CWK400 D ! used ! Dimensions ( without connectors ): 220 x 70 x 70 mm Dimensions ( complete ): 265 x 90 x 200 mm

stationary transition, stationary crossing EUROLINE 512 Size 6 5126306 Step load: max. 150 kg Total load: max. 300 kg DIN EN ISO 14122 Clear height ( inside ): 1210 mm handrail with knee bar installed on both sides, Height: 1100 mm Climb angle: 60° 5 steps: 1000 x 180 mm Step spacing: 210 mm Platform size: 1440 x 1000 mm Platform height: 1240 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 2760 x 1180 x 2360 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 5100 x 3150 x 3060 mm Total load: max. 200 kg Clear height (inside): 1800 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 9 Steps: 800 x 240 mm Step spacing: 225 mm Platform size: 3100 x 800 mm Platform height: 1920 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 5100 x 3150 x 3060 mm

stationary transition, stationary crossing PAGUS 4200 x 2600 x 2510 mm Clear height ( inside ): 1400 mm handrail with knee bar installed on both sides, height: 1000 mm Climbing angle: 45° 7 steps: 900 x 240 mm Step distance: 190 mm Platform size: 2450 x 900 mm Platform height: 1500 mm Material: steel ( galvanized ), steps: steel, grating ( galvanized ) used, tested ! Dimensions (assembled, length x width x height): 4200 x 2600 x 2510 mm

stationary transition, stationary crossing PAGUS 4640 x 4600 x 2420 mm Clear height ( inside ): 1330 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 7 steps: 990 x 270 mm Step spacing: 190 mm Platform size: 4480 x 1040 mm Platform height: 1430 mm Material: steel, steps: steel, grating ( galvanized ) used, tested ! Dimensions (assembled, length x width x height): 4640 x 4600 x 2420 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 4500 x 4220 x 2340 mm Total load: max. 200 kg Clear height (inside): 1100 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 60° 4 steps: 2x 800 x 200 mm / 1x 600 x 200 mm Step spacing: 250 mm Platform size: 3200 x 800 mm / 2660 x 800 mm Platform height: 1210 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 4500 x 4220 x 2340 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 5960 x 1160 x 2880 mm Total load: max. 150 kg Clear height ( inside ): 1550 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 7 steps: 1000 x 240 mm Step spacing: 225 mm Platform size: 4230 x 1000 mm Platform height: 1780 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 5960 x 1160 x 2880 mm

stationary transition, stationary crossing PAGUS 162000 x 3470 x 2870 mm Clear height ( inside ): 1640 mm handrail with knee bar installed on both sides, height: 1100 mm 3 stairs, climbing angle: 40° 9 steps: 1000 x 270 mm Step spacing: 190 mm Platform size: 13850 x 1020 mm Platform height: 1770 mm Material: steel, steps: steel, grating ( galvanized ) used, tested ! Dimensions ( assembled, length x width x height ): 162000 x 3470 x 2870 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 3720 x 960 x 2310 mm total load: max. 200 kg Clear height (inside): 1090 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 5 Steps: 800 x 240 mm Step spacing: 205 mm Platform size: 1400 x 800 mm Platform height: 1210 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 3720 x 960 x 2310 mm

Tolerance measuring station with dial indicator FEINMESSZEUGFABRIK SUHL Tolerance measuring station measuring range: 170 mm Working surface: Ø 125 mm height max: 60 mm with wooden box Dimensions: 370 x 320 x 380 mm

Horlemann HR10U-S switchgear 12 kV HR 10U the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power Switchgear: Manufacturer: Hörtemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short circuit power: 20 kA/1s Height: 1900 mm Width: 4550 mm Depth: 750 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Design data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Type: Cast resin Upper voltage: 10 kV Low voltage: 400-230 V Circuit: Dyn5 Year of construction: 2010 Weight: 1.8 t The depressurization of the switchgear is carried out via a pressure relief chamber in the lower area of the control panel Data: Inspection r ...

Chemical pumping station PAGUS plastic cabinet 700 x 830 x 1590 mm Air diaphragm pump ALMATEC AC-E 10 operating pressure: max 10 bar cabinet almost metal-free ! Dimensions: 700 x 830 x 1590 mm

Chemical dosing station PAGUS plastic cabinet 710 x 800 x 1690 mm 2 air-operated diaphragm pump and various valves and sensors cabinet almost metal-free ! Dimensions: 750 x 950 x 2100 mm

Mounting station with roller block MKF R 3026 Payload: 2000 kg Roller blocks only screwed on, Sockets and pneumatic connection not checked Dimensions: 1760 x 600 x 1000 mm

SEnergie CHP G 4.12 TI Electricity and heat generators from 2009 with 64,692 operating hours, complete, closed unit in good condition 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz AC synchronous generator Leroy Somer LSA 43.2L8 C 6/4 with 63 KVA

Festo Didactic mobile pneumatic board Hydraulics training and further education with Festo Didactic More items - new and used - can be found in our shop! International shipping costs on request!

New one kit motortech 75.30.150-16 mic 4kit in stock, avaible !

Combined heat and power plant with generator El. Power: 40 KW Thermal power 72 KW Fuel: natural gas Mains connection 400 V 50 Hz 100 A Flow 90 C Return 70 C Pressure 16 bar Generator 60 KVA Length 2.40 m Width 1 m Height 1.60 m

Key data: 544 KW, 680 kVA, 400 V

Well-preserved diesel generator Low operating hours has been at a standstill for the last 10 years. Mailable Exhaust gas heat exchanger + bypass, muffler, table cooler, available.

Double station, fuel oil pump, 2x screw pump KRAL type: DS1 750.11X flow rate: 13.7 l/min delivery pressure: 4 bar speed: 2900 rpm viscosity: 6 mm²/s engine: AEG Type AM 71 NX2 0,55 kW 2760 rpm 218 - 242 / 380 - 420 V 3AC 50 Hz IP55 60 Hz - operation is possible ! used, tested ! Dimensions ( without connecting pipes ): 390 x 360 x 430 mm

Ref. -No.: 10197 Manufacturer: N/A Storage location: Halberstadt

Ref. -No.: 10198 Manufacturer: N/A Storage location: Halberstadt Further information: autom. welding station with positioner

Ref. -No.: 10195 Manufacturer: ESAB Storage location: Halberstadt Country of origin: Schweden serial number: 620-703-3544

Manufacturer: MBusch, Type: MB LA 500, Year: ca.1997, Working widht mm: 600, Working hight mm: 80, Workstations: 4, Glue jets: 4, Schlitz und Zapfenbeleimung: yes, Pneumatical work piece clamping: yes, Fusspedal Takt: yes, Wasseranschluss zum reinigen: yes, Leimpumpe: yes, Movable: yes, Automatical glue supply: yes, Compressed air bar: 6, Year :ca.1997

• DataMatrix station for labelling and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation). • Output max. 400 items/min, belt speed 5 - 90 m/min • Data matrix code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Various other readable code types, including Pharmacode • Product run from left to right • Product transfer by alignment belt, consisting of lower (600 mm long) and height-adjustable upper belt (400 mm long) • Ejection belt 300 mm long • Product height max. 150 mm, product width 45 - 130 mm • Bad product ejection by pneumatic pusher with collecting container • Ejection countercheck • Central height adjustment for printer and camera • Light barrier for product detection (trigger) • 1 LAN PCE camera Mini-Smart, plain text/code control 6.217 • 3 installation positions for camer ...

Pfeiffer Vacuum Hicube 300 brand new, in stock. 12 months warranty.

1 piece of used scraper / scraper Manufacturer: Liebherr Type: LSM 16/11 Completely overhauled/repaired in 2022 Year of construction 2009 In perfect condition AT CALL Location: Southern Germany Price on request Offer and prices are purely net ex location Subject to prior sale, errors and/or misrepresentations excepted, without guarantee and/or warranty, as seen, lying and/or standing

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Execution: stable -without drive motor roller conveyor -Roll width: 590 mm -Conveying length: 1800 mm -Diameter roller: 80 mm -pneumatic lifting: 30 mm -Delivery height: mm adjustable -Number: 1x stations available -Price: per piece -Dimensions: 2070/925/H205 mm -Weight: 266 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -stable execution -driven: electric -Drive motor roller conveyor: 0.37 kW 71 rpm -Drive motor conveyor belt: 0.37 kW 88 rpm -Roll width: 870 mm -Conveying length: 950 mm -Transfer of conveyor belts: 1000 mm -Lifting: pneumatic -Diameter roller: Ø 65 mm -Rollers: rubberized -Shaft diameter: Ø 15 mm -Delivery height: 570 mm adjustable -driven: via toothed belt -Dimensions: 1100/1050/H5700 mm -Weight: 230 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, blind conveyor belt, slat conveyor belt, transfer station -Transfer station: Conveyor belt with tipping function, comes from blind production -Speed: 10 m/min -Conveyor belt width: 6050 mm -Conveyor belt length: approx. 880 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Transport dimensions: 6050/910/H960 mm -Weight: 520 kg

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Aerospace telephone system, radio network -Manufacturer: Cisco, Aironet BR1310 -Type: AIR-BR1310G-E-K9-R -Dimensions: 205/205/H80 mm -Weight 1.1 kg