25523 offers speed master 72

maximum number of results exceeded > 1000
please refine your search

Category: 706 beverage machines
Latest update: 02.05.2024 add to watchlist
approved
dealer
item-No.: 162437281

used

check Seller: Seegräber GmbH
Location: Land-de
Price: 2.700  add to watchlist

including speed regulator and a foot. Without belt. More then 300 machines new and second hand on our seema .de

Category: 1401 shelves
Latest update: 02.05.2024 add to watchlist
approved
dealer
item-No.: 162474226
New in: 2009

used

check Seller: Dr. Sonntag
Location: Würzburg Land-de
Price: 815 € add to watchlist

Dexion Speedlock pallet rack P90 H RA1094 Ideal for your pallet storage needs, the Dexion P90H galvanized pallet rack provides a highly efficient, flexible solution for any need. Product information: - P90 H type upright frame, bolted infill. - Height x depth 8,450 x 1,100 mm. - Post width 90 mm. Beam type SLI 2.700 mm incl. safety pins - Shelf load 1,200 kg with evenly distributed load - floor fixing on site Example: Basic bay length 2,880 mm + add-on add-on bay length 2,790 mm Basic bay consisting of: 2 pcs. upright frame 10 pcs. beams incl. safety pins Extension panel consisting of: 1 pc. upright frame 10 pcs. beams incl. locking pins Technical data: Manufacturer: Dexion Frame type: P90 H Beam type: SLI 2700 mm Year of manufacture: 2009 Shelf load: 1200 kg with evenly distributed load Condition: good In case of larger demand, we will be glad to offer you a suitable individual pallet r ...

Category: 706 beverage machines
Latest update: 02.05.2024 add to watchlist
approved
dealer
item-No.: 162478482

used

check Seller: Seegräber GmbH
Location: Land-de
Price: 2.700  add to watchlist

90 ° corner station with motor with speed control and rotating plate diameter 250mm without foot - counter clockwise More then 300 machines new and second hand on our seema .de

Category: 831 post press: cutters and guillotines / High speed cutters
Latest update: 18.01.2024 add to watchlist
item-No.: 162496947
New in: 2009

used

Seller: Wira Grafik GmbH
Location: Land-de

add to watchlist

Perfecta 115 TS High Speed Guillotine Age: 2009 Cutting table width: 1150 mm TS-Control 19" Touch Screen Colour display Cast-Iron Air table Cast-Iron Side Air Tables (Left and Right) Table Light Cutting line light and preclamp function Accessories: Extra Knives

Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 10.10.2023 add to watchlist
approved
dealer
item-No.: 162580569
New in: 1953

used

check Seller: SWH GmbH
Location: 38820 Halberstadt Land-de

add to watchlist

Ref. -No.: 10229 Manufacturer: GÖPPINGER Year of construction: 1953 Type of control: Konventionell Control: N/a Storage location: Halberstadt Country of origin: Deutschland Machine length: 4700 mm Machine width: 1450 mm Machine Height: 1300 mm Weight Of The Machine Ca.: 3,1 t Supply voltage: 380 V Turning Length: 3000 mm Turning Diameter Over Bed: 530 mm Centre Distance: 3050 mm Swing Diameter Over Bed Slide: 305 mm Spindle Bore: 58 mm Total Power Requirement: 5,5 kW Circulation in the crank: 720 mm

Category: 706 beverage machines
Latest update: 02.05.2024 add to watchlist
approved
dealer
item-No.: 162634225

used

check Seller: Seegräber GmbH
Location: Land-de

add to watchlist

Parallelstation,mit Geschwingigkeitsregelung und Fuß -ohne Kettenband 1 kw More then 300 machines new and second hand on our seema .de

Category: 109 other metal working machines
Latest update: 05.11.2023 add to watchlist
approved
dealer
item-No.: 162762510

used

check Seller: Kaiser- Werkzeugmaschinen
Location: 76646 Bruchsal Land-de

add to watchlist

Klopp 1000 Speed Slicer Total width: 150 cm Total length: 3,330 cm Total height: 170 cm Planing width: 750 mm Working length: 1000 mm Table width: 900 mm

Category: 101 boring mills and machining centers / High Speed Radial Borers
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 162766238
New in: 1988

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Key data: 40 mm, 1007 mm

Code 231027 Rewriting Controlled Fast Radials Make DONAU Type DR 40 Machine No. 1137 – 3 Built in 1988 Drilling into full stem 60 40 mm Drilling into full GG 22 50 mm Tapping capacity into the St. 60 M 33 Tapping capacity into the GG 22 M 45 Steep taper of the drilling spindle SK 40 Feed normal ( 5x ) 0.075 – 0.6 mm/rev Drilling spindle speeds 18 pcs. 35 – 1800 rpm Drilling spindle stroke 200 mm Drilling radius min/max 350 / 1300 mm Projection min/max 120 / 1007 mm Height adjustment of the drilling spindle head 450 mm Distance drilling spindle/table min/max 350 / 800 mm Table top 1225 x 750 mm Power 2 / 3 kW 380 Volt Weight 2000 kgs Dimensions LxWxH 2300 x 1225 x 2400 mm Accessories for tapping device Coolant system Condition machine is in good condition

Category: 103 milling machines / High Speed Milling Centres (HSC)
Latest update: 10.11.2023 add to watchlist
item-No.: 162785761
New in: 2008

used

Seller: Luhan Werkzeugmaschinen
Location: 89547 Gerstetten Land-de

add to watchlist

Key data: 800 mm, 600 mm, 550 mm

Control Heidenhain ITNC 530 60-fold tool changer Spindle HSK 50 E with 36,000 rpm 4-fold pallet changer, pallets 800 mm x 400 mm Table chuck Infrared Probe PS 32 electr. Handwheel Laser Tool Measurement Spindle cooling unit

Category: 1107 other energy machinery
Latest update: 01.05.2024 add to watchlist
approved
dealer
item-No.: 162813307

used

check Seller: Theodor Eberlei GmbH & Co.KG
Location: 26215 Wiefelstede, DE Land-de
Price: 45 € add to watchlist

Speedometer unit -Manufacturer: Renault KBA zu2): -3004 -Model: Scenic KBA zu3): 575 -Model type: 1.6 16V ABS: Yes -Gear type: Manual -Engine code: K4M 700 - Fuel type: gasoline -Year of construction from: 09/1999 Power kW: 79 -Year of manufacture to: 08/2003 Cubic capacity cc: -1598

Category: 1107 other energy machinery
Latest update: 01.05.2024 add to watchlist
approved
dealer
item-No.: 162816002

used

check Seller: Theodor Eberlei GmbH & Co.KG
Location: 26215 Wiefelstede, DE Land-de
Price: 40 € add to watchlist

High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz -Type: 6ES5 385-8MB11 -Number: 2x Modul available -Price: per package -Dimensions: 100/45/H135 mm -Weight: 0.2 kg/pc.

Category: 2200 surplus goods
Latest update: 01.05.2024 add to watchlist
approved
dealer
item-No.: 162817869

used

check Seller: Theodor Eberlei GmbH & Co.KG
Location: 26215 Wiefelstede, DE Land-de
Price: 50 € add to watchlist

Measuring device for speed or frequency, tachometer, cutting speed measuring device, hand tachometer, revolution measuring device -Manufacturer: Jaquets Indicator 100REVs 10 m -Accessories: see photo -Case: original case -Dimension box: 120/85/H30 mm -Weight: 0.3 kg

Category: 2200 surplus goods
Latest update: 01.05.2024 add to watchlist
approved
dealer
item-No.: 162821270

used

check Seller: Theodor Eberlei GmbH & Co.KG
Location: 26215 Wiefelstede, DE Land-de
Price: 155 € add to watchlist

Measuring device for speed or frequency -Type: 0516 4750 -Dimensions: 420/320/H90 mm -Weight: 3 kg

Category: 1107 other energy machinery
Latest update: 01.05.2024 add to watchlist
approved
dealer
item-No.: 162821329

used

check Seller: Theodor Eberlei GmbH & Co.KG
Location: 26215 Wiefelstede, DE Land-de
Price: 120 € add to watchlist

High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz orig -Type: 6ES5 385-8MB11 -Number: 4x available -Price: per package -Dimensions cardboard: 140/110/H60 mm -Weight: 0.3 kg/pc.

Category: 103 milling machines
Latest update: 06.04.2024 add to watchlist
item-No.: 162834626

used

Seller: HAMMOUD
Location: Land-de
Price: VB 1.400 € add to watchlist

KLOPP high-performance high-speed planer with friction drive type 450 Little used, in very good condition. Complete with documentation, accessories and tools Includes closet full of tools. Shipping available for an extra charge Pallet 1: 170 x 130 x 160 cm, 1072 Kg Pallet 2: 120 x 80 x 140 cm, 320 Kg Value Added Tax (VAT) Net price : 2.700,00 Euro For further questions or pictures, we can also be reached via Whatsapp at 00491743357243.

Category: 831 post press: cutters and guillotines / High speed cutters
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 162871420
New in: 2007

used

check Seller: FGT Graphic Machinery
Location: 70771 Leinfelden-Echterdingen Land-de

add to watchlist

WOHLENBERG pro-tec 137 with ASE – cutting line  Wohlenberg 137  Year / SN 2007  Airtable  Touchscreen  CIP3 + CIP4 compatible  ASE  Photocells  Program  Sidetable  Baumann NUP 1000 – Stacklifter  Max Sheetfed size: 135cm x 110cm  Baumann BSP 3 L – Vibrator  Papersize: 80cm x 114cm  Baumann BA 3 – 1400 – Unloader  Papersize: 80cm x 140cm  Mettler Toledo Scale

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 162903210
New in: 2010

used

Seller: Exapro
Location: Land-fr
Price: 38.000 € add to watchlist

C.B.FERRARI B150 high speed - spindle revolutions 20.000 rpm table 1500x500 strokes 850x420x420 tool change 24 positions CNC ELEXA 550 completely overhauled by C.B.FERRARI in 2010 currently connected machine

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 162903264
New in: 2014

used

Seller: Exapro
Location: Land-fr
Price: 198.000 € add to watchlist

X axis : 550 mm Y axis : 400 mm Z axis : 420 mm Double table Double Spindle Table size : 460/580 Spindle taper : HSK63 Fanuc Control Machine is in good condition

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 162903265
New in: 2011

used

Seller: Exapro
Location: Land-fr

add to watchlist

Roders RXP600 DSH Precision High Speed ​​CNC Milling Center Machining range for horizontal table position: X 500 mm, Y 855 mm, Z 400 mm Distance from spindle nose to table: 515 mm Tool magazine: 28 positions Overall dimensions in transport position: W 2300 × D 2800 × H 2920 mm. Total weight: 10200kg. Spindle Model: FISCHER HSC 40 - high-frequency milling, vector-controlled spindle, FISCHER (Germany) Power: 14 kW, 3000-42.000 rpm Tool holder HSK 40: Maximum tool diameter: 16 mm. Desktop Swivel rotary table with thrust bearings for highest rigidity and accuracy, integrated in the X-axis. A-axis tilt range: +/- 115 degrees. C-axis tilt range: +/- 360 deg. Workpiece weight: 200 kg. T-slot table size 340 × 340mm (ø400) Groove width: 12mm. Distance between grooves: 45 mm. Linear motors: all axes Cooling of the main a ...

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 162903479
New in: 2007

used

Seller: Exapro
Location: Land-fr
Price: 54.000 € add to watchlist

Makino S33 High Speed Machining Center Control Unit : Fanuc PRO 5 X: 650 mm Y:500 mm Z: 400 mm Spindle speed : 20.000 rpm Rapid: 40.000mm/min Cutting: 40.000mm/min Prob Tool holders are included Machine is in good condition

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 162903503
New in: 1998

used

Seller: Exapro
Location: Land-fr
Price: 18.000 € add to watchlist

portal milling machine DIGMA 700 GC from 1998 was made in Germany and has a working history of light machining on plastic material. It has Adnronic numerical control, with connection to the network with RJ45. This machine is capable of operating with a spindle speed of up to 52000rpm. High performance HSK30 spindle BRAND: DIGMA YEAR: 1998 MODEL: 700GC TYPE OF APPLICATION: MILLING TYPE OF MACHINE: MILLING MACHINES CONTROL UNIT BRAND: ANDRONIC Travel X-axis: 750mm, y-axis: 500mm, z-axis: 400mm, Maximum speed: 52,000rpm, Dimensions length: 2800mm, width: 2600mm, height: 3000mm, weight: 4.35t, including documentation and CE certificate, no. 30 BIG tool holders Laser Bloom included but not working Minimal air/oil or air lubrication The machine is working.

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 162903507
New in: 2001

used

Seller: Exapro
Location: Land-fr
Price: 22.000 € add to watchlist

MIKRON VCP 710 high speed vertical machining center with HEIDENHAIN 426 control. Unique opportunity, machine in perfect condition. Including magnetic plane and all its mandrels. X axis travel 710 Y 600 Z 500. Spindle speed 18000 rpm, chip conveyor.

Category: 1108 spare parts
Latest update: 08.12.2023 add to watchlist
item-No.: 162925029
New in: 2023

new

Seller: Right Way Power Solution
Location: 75730 Karachi Land-pk

add to watchlist

Woodward Speed Controller PROACT Model II Part number 9907-1290 Governor Controller Available in stock for sale.

Category: 1108 spare parts
Latest update: 08.12.2023 add to watchlist
item-No.: 162925031

new

Seller: Right Way Power Solution
Location: 75730 Karachi Land-pk

add to watchlist

Perkins 4008TAG2A 9905-462 proact Model 1 One digital speed control woodward p/n 9905-462 available in stock.

Category: 1108 spare parts
Latest update: 08.12.2023 add to watchlist
item-No.: 162925284

used

Seller: Right Way Power Solution
Location: 75730 Karachi Land-pk

add to watchlist

Woodward Speed Controller 2301 Load Shearing Speed Control 2301 LSSC 9905-020 9907-018 9907-019 and many other Part number available in stock.

Category: 101 boring mills and machining centers
Latest update: 01.05.2024 add to watchlist
approved
dealer
item-No.: 162941395

used

check Seller: Theodor Eberlei GmbH & Co.KG
Location: 26215 Wiefelstede, DE Land-de

add to watchlist

Magnetic drill, hand drill, core drill, magnetic core drill -Manufacturer: Fein, magnetic drill with transport case -Magnetic base: AGT type PS 32 L-9 95W -Drilling machine: Fein type DDsk 672-1 -Power: 900W / 100/150/260/420 rpm -Holder: MK3 with drill chuck 3-16 mm -Drill: steel max. Ø 32 mm -Connection: 220 V -Transport dimensions: 840/440/H340 mm -Weight: 70 kg

Category: 106 presses / High Speed Presses
Latest update: 14.12.2023 add to watchlist
approved
dealer
item-No.: 162949038

used

check Seller: STOCKEUROSTOCK SRL
Location: 44100 Ferrara Land-it

add to watchlist

Mechanical Press Kažinin Gooseneck Worktop 1050x1200 Capacity 630 ton

Category: 1300 other machines and plants
Latest update: 02.05.2024 add to watchlist
approved
dealer
item-No.: 163044400

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 1.150 € add to watchlist

High-speed machining motor PERSKE type: KCS 71.16-2 D ( KCS71.16-2D ) 4 kW 2860 rpm 220 / 380 V 3AC at 50 Hz IP 54 shaft diameter: Ø 40 mm with manual shaft lock !with manual shaft lock ! used, tested ! Dimensions: 520 x 200 x 200 mm

Category: 1300 other machines and plants
Latest update: 02.05.2024 add to watchlist
approved
dealer
item-No.: 163044401

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 880 € add to watchlist

High-speed machining motor PERSKE type: KCS 71.16-2 D ( KCS71.16-2D ) 4 kW 2860 rpm 220 / 380 V 3AC at 50 Hz IP 54 shaft diameter: Ø 35 mm a cooling fin is damaged used, tested ! Dimensions: 520 x 200 x 200 mm

Category: 106 presses / High Speed Presses
Latest update: 04.01.2024 add to watchlist
approved
dealer
item-No.: 163078621
New in: 1998

used

check Seller: Silicon plus
Location: 22000 Sremska Mitrovica Land-rs

add to watchlist

Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...

Category: 831 post press: cutters and guillotines / High speed cutters
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 163104374
New in: 1984

used

check Seller: Seizmeier GmbH & Co. KG
Location: 86399 Bobingen Land-de

add to watchlist

Air Table, Cast Iron Tray Tables with Air L+R

Category: 1104 boilers
Latest update: 09.01.2024 add to watchlist
approved
dealer
item-No.: 163114449
New in: 2008

used

check Seller: Hermann Sprenger GmbH
Location: 45141 Essen Land-de

add to watchlist

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 300 Capacity : 300 kg/h Heat output : 200 kW Operating overpressure : 31 bar Previously operated with : 13 bar Test pressure : 56 bar Water content approx. : 39 l Year of construction : 2008 CE mark : 0036 equipped with Weishaupt gas burner WG30N / 1-C, ZM-LN, 40-350 kW, control cabinet, mounted on boiler body and the existing coarse and fine fittings.

Category: 831 post press: cutters and guillotines / High speed cutters
Latest update: 16.01.2024 add to watchlist
approved
dealer
item-No.: 163157382
New in: 1984

used

check Seller:
Location: 84494 Neumarkt-St.Veit Land-de

add to watchlist

Polar 115 EMC Year of construction: 1984 EMC Version Air table 2x lifts left+right Replacement blades At call!

Category: 101 boring mills and machining centers / High Speed Machining Centres (HSC)
Latest update: 16.04.2024 add to watchlist
approved
dealer
item-No.: 163176741
New in: 2024

new

check Seller: CNC-Maschinentechnik - Wolfgang ECKER
Location: Land-at

add to watchlist

Key data: 500 mm, 400 mm, 300 mm

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

Category: 106 presses / High Speed Presses
Latest update: 20.01.2024 add to watchlist
approved
dealer
item-No.: 163182977
New in: 1996

used

check Seller: Silicon plus
Location: Land-de

add to watchlist

Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Mbawvyqg Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Category: 209 other wood working machines / High-speed clamping carriages
Latest update: 25.01.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 163214188
New in: 1994

used

check Seller: Simon Möhringer Anlagenbau GmbH
Location: 97353 Wiesentheid Land-de

add to watchlist

Clamping carriage SWVH1K - Used, factory refurbished Bearing No.: asw875 Make: Möhringer Year of construction: 1994 Machine number: 9401 Part Number: 96900008 Specifications: Gauge: 980 (mm) Support height: 430 (mm) Clamp opening: 800 (mm) Plier rotation: 360° hydraulic Travel drive: hydraulic Travel speed: forward and backward 100 (m/min.) Drive power: 4 (kW) Overall length: 3,200 (mm) Weight approx.: 1,350 (mm) Type of control: remote controlled

Category: 834 post press: perfect binders
Latest update: 01.05.2024 add to watchlist
approved
dealer
item-No.: 163318956
New in: 2011

used

check Seller: F1-TRADE GmbH
Location: Emskirchen - Nuernberg Land-de

add to watchlist

Elektrische Hochleistungs-Schneidemaschine / High Speed Wire Cutting Machine RENZ HSC-E Baujahr / Year 12/2011 - Serial-No. 460007150.50107 Schneideleistung bis / Cutting capacity max. 3000 Stueck/h Schneidelaenge 3 - 99 Schlaufen, variabel einstellbar Cutting length 3 – 99 loops, variable adjustable Stueckzahlzaehler ja / Piece counter yes Verarbeitbare Durchmesser / Possible wire diameters 3/16" - 1 1/4" ( 5,5 - 32 mm ) Teilung / Pitch 2:1, 3:1, 4:1 Umruestzeit von Durchmesser zu Durchmesser / Time required for diameter change 2 - 10 Min. Spannung Power supply / 230 V / 50 Hz Masse / Machine L110 x W82 x H100 cm Gewicht / Weight gross 74kg -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Category: 825 pre press: other
Latest update: 01.05.2024 add to watchlist
approved
dealer
item-No.: 163318913
New in: 2007

used

check Seller: F1-TRADE GmbH
Location: Emskirchen - Nuernberg Land-de

add to watchlist

Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-System Year 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Category: 831 post press: cutters and guillotines / High speed cutters
Latest update: 21.02.2024 add to watchlist
approved
dealer
item-No.: 163407199
New in: 2007

used

check Seller:
Location: 84494 Neumarkt-St.Veit Land-de

add to watchlist

Schneider Senator 78 E-Line Year of construction: 2007 E-Line Versio, Monitor, Air table, 2x side tables with air, Spare blades. Very good condition! At call!

Category: 107 sheet metal working
Latest update: 02.05.2024 add to watchlist
item-No.: 163418997
New in: 2018

used

Seller: Exapro
Location: Land-fr
Price: 7.000 € add to watchlist

Staple forming machine SpeedySeamer RAS 22.07 Production of all staples for the ventilation industry Max. profile height 20 mm Speed 16 m/min Processing stations 7 Max. sheet thickness 1.5 mm Based on strength of 400 N/mm². Lifting device for aluminum sheets Reduces pressure and prevents aluminum breakage - Straightening roller for left and right roller set with adjusting wheel - For upward straightening of bent sheets - For rounding the bend Support tables - Standard version - With right-hand sheet guide - With left-hand sheet guide

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 163459791
New in: 2002

used

Seller: Exapro
Location: Land-it
Price: 21.500 € add to watchlist

X-axis travel 400 mm Y-axis travel 450 mm Z-axis travel 350 mm Heidenhain 530 numerical control Table length 500 mm table width 450 mm Number of tools 18 Spindle rotation speed 42,000 Rpm HSK E 40 spindle connection Weight 6500kg BLUM laser system Spindle cooling system

Category: 705 pharmaceuticals and cosmetics machines
Latest update: 02.05.2024 add to watchlist
item-No.: 163460544
New in: 2016

used

Seller: Exapro
Location: Land-it
Price: 41.500 € add to watchlist

Disperser with electronic speed variation diamac d 50 Disperser with electronic speed variation diamac d 50 Like new, never used, including auger for pouring powders and raw materials. The machine is sold including the auger (price agreements will be negotiated during the negotiation phase) CONSTRUCTION FEATURES Supporting metal structure Locking system adjustable bowl with tightening straps Dust and vapor tight cover, with dust loading hopper. Hydraulic lifting via control unit incorporated in the structure Lifting piston with non-return valves and flow regulator AISI 304-316 stainless steel mixing shaft V-belt and pulley transmission Impellers Cowless type in stainless steel. Aisi 304 stainless steel or chromed Main electrical panel with driving inverter including filter and anti-interference inductance Normal or ATEX type machine side control pulpit. Industrial or AT ...

Category: 402 packing machines
Latest update: 02.05.2024 add to watchlist
item-No.: 163514108
New in: 2007

used

Seller: Exapro
Location: Land-bg
Price: 32.000 € add to watchlist

Model: HEMINGSTONE HM-1100 C5 Bag size - Width 1000 mm min(each track), Length 250-700 mm Number of tracks – 5 Production Speed (cycles/min) max 200 Production capacity max – 1000 pcs/min Film unwind width max – 900 mm Film unwind diameter max – 1000 mm Thickness of material 14-60 microns (2x7 – 2x30) Drive system – Servo drive Year 2007

Category: 832 post press: folders
Latest update: 02.05.2024 add to watchlist
item-No.: 163514563
New in: 1984

used

Seller: Exapro
Location: Land-lt
Price: 11.500 € add to watchlist

Machine is in good working condition. Punch has been expertly maintained. Rod ends, belts, bearing replaced as necessary to keep machine running tight. Auto Feeder, Punching Unit, vibro table Delivery, 3:1 & 2:1 Punch Max size 380x380 mm 3:1 square 4x4mm perforating tool 2:1 round 6mm perforating tool

Category: 831 post press: cutters and guillotines / High speed cutters
Latest update: 06.03.2024 add to watchlist
item-No.: 163519075
New in: 2007

used

Seller: Wira Grafik GmbH
Location: 42857 Remscheid Land-de

add to watchlist

Polar 78 X Age: 2007 Cutting width: 78 cm Programming 15" Color Display Chromed Air table Large Air Side tables Machine comes with 1 extra knife

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 163521513
New in: 2007

used

Seller: Exapro
Location: Land-pl
Price: 33.500 € add to watchlist

Control unit Elumatec X-Axis travel 6700 mm Y-Axis travel 350 mm Z-Axis travel 280 mm Table length 6700 mm Spindle speed 24000 rpm Tool holder HSK-F63 Routing spindle with integrated rotation unit (0°, -90°, -180° and -270°) for angle head Dimensions L 8450 x W 3400 x H 2560 mm Weight 3400 kg

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 163521550
New in: 2005

used

Seller: Exapro
Location: Land-cz

add to watchlist

Measuring tools by laser, changer for 18 tools Accessories: 3D probe, cutter holders plus clamping device, manuals Spindle on less than 25,000 hours. Clamping devices on the table are not part of the offer. 2006 Keller L-CUT-2-P5-EX extractor used with RFM600

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 163521560
New in: 2000

used

Seller: Exapro
Location: Land-cz

add to watchlist

Machine in good technical condition, after agreement possibility of testing. Clamping surface of the table 700x500 mm X axis travel 600 mm Y-axis travel 450 mm Z axis travel 300 mm Spindle speed 0 - 42000 /min. Number of controlled axes 3 Centre cooling no Spindle clamping cone HSK E 40 . Machine weight 6000 kg Max. workpiece weight 800 kg Dimensions d x w x h 3200x2250x2650 mm

Category: 101 boring mills and machining centers
Latest update: 02.05.2024 add to watchlist
item-No.: 163521561
New in: 2003

used

Seller: Exapro
Location: Land-cz

add to watchlist

The machine is in good technical condition. Travel in X,Y,Z axes: 1650 x 810 x 810 mm Table clamping surface: 1800 x 780 mm Max. table load: 1750 kg Max. spindle speed: 24000 1/ min. Spindle motor power: 51 kW Number of places in the tool tray: 24 Steering system: Heidenhain 530 Machine dimensions L x W x H: 7000 x 4000 x 3600 mm Machine weight: 14500 kg By prior arrangement, the possibility of a tour in progress.

Category: 209 other wood working machines
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 163534509

used

check Seller: Caselli Group Spa
Location: 33048 S.Giovanni al Natisone Land-it

add to watchlist

HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online