Manufacturer:
(Category: 2000)
new
1x Crankshaft for Jenbacher 624. No. 444990,444989,444988 1x Crankshaft for Jenbacher 624 No. 444990,444989,444988 1x from Stock Available
Light Weight Impeller Impeller Wheel Size : 710mm Impeller Material : M/S S275JR Shaft Material : Carbon Steel Fan Shaft : OD 2-1/4” x 870mmL Shroud : 2mm Fin Support Ring : 2 mm Back Plate C : 4 mm Fin D : 2 mm Included Test Run by 3rd Party - Test run by 3rd party during blower commissioning at F42, the supplier will be present to witness the overall performance of the impeller. This is to identify any fault in the fabricated impeller. Included Balancing report - All wheels are dynamically balanced to ISO1940 or AMCA204-G2.5 standard, with reports provided.
Item: AC SERVO DRIVER (JSDEP-20A) Qty: 10 units Please contact Ms Puteri at 012-8057943 if yre interested
FRP BUFFER TANK 8" FRP FLANGE, 4" FRP FLANGE, 2" FRP FLANGE
new
1x Crankshaft for Wartsila 20V34 SG NEW For Sale from Stock
1 of used gearbox, make Lenze, type GKS04-2 N HBR, 0804, A 000, 81 NM, 171,2 r/min, CLP 460, i = 8,178.
1 of used gearbox, Lenze type 12.602.12.6.4, ratio i=6.3. Can also be supplied in overhauled condition. Enquire for details.
1 of used gearbox, Lenze type GKS04-3 N HBR 1C, i=16,087. Overhauled and fitted with new seals (except output side) and oil (CLP 460).
1 of used gearbox, Lenze type 52.110.10.14, ratio i=15. Example pictures only. Various mounting bracket versions available. Enquire for details.
1 of used gearbox, Lenze type 52.162.06.00, ratio I=10. New 1994. Overhauled with new bearings, seals and oil.
Orginal prechamber spark plug 1245-3556 For variable MWM TCG2020 v12/v16/v20 & Caterpillar CG170 -v12/v16/v20 engines. Natural gas 5pcs new
1 of used gearbox, Lenze type 52.162.06.000, ratio I=15,53. Overhauled with new bearings, seals, oil, silent block and spider.
Make Becker, Type: VT 4.16, SN: 2409570, 50/60 Hz., 1420/1700 /min, 0550,70 kW, 16/19 m3/h, 150/150 mbar. New 2009. Cleaned, fitted with new filter and tested OK.
Nut mount/rotation body for a 20mm ball screw according to DIN This is a holder for a recirculating ball nut according to DIN 16mm. The rotating body was made of solid metal, the gearing was elaborately manufactured on a machining center with very tight tolerances. This ensures that the typical reverse slippage that occurs with standard pulleys is practically zero! So quality and precision are no coincidence The first picture shows the rotating body, the second picture a typical application. The rotating body is supplied with the corresponding nut and is black burnished. The nut mount has 38 teeth and is intended for use with an HTD 5M timing belt -9mm wide. Also available in 16 / 25 and 32mm and larger quantities possible.
Dear Ladies and Gentlemen, We hereby offer the following original and newly packaged AXIMAX Blue Fan. aximax axial fan NW500 Type: AXK 500-6BD2-20°-3 with attached three-phase motor IE3 3 kW; 3000 min-1; 400V 50Hz with PTC for FU operation with protective grille between impeller + motor New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de
Dosing variator Reference Volpak Supplier SMTBD11AC22017 OPTION C
Oil pump for compressor lubrication Serial No.: MKE 2 C/KAW 3 QN 0.2 l/min, Installé précédemment sur: COURTOY R100, Previously installed on: COURTOY R100
Voltage: 24V Rated Power: 15 kW Rotation Direction: Clockwise (CW) Number of Teeth: 17 Flange Diameter: 90 mm The information on spare parts is indicative and does not guarantee accuracy.
Original MWM / Caterpillar Energy Solutions industrial spark plug, part number 12453572. Featuring Double Iridium technology and an M18 thread, it is specifically designed for MWM TCG series and Caterpillar CG series stationary gas engines. It offers an extended service life and extremely reliable ignition even under severe operating conditions.
Ø 100, class 1.6 0 - 25 bar Version: Vertical Display range: 0 - 25 bar Scale graduation: 0.5 bar Materials: Housing 1.4571, measuring system and connection, viewing panel multi-layer safety glass Connection: 1/2'' bottom (AB) Plate spring pressure gauge
Reference: 84033 Compression roller for COURTOY R100, Previously installed on: COURTOY R100
Filling shoe, forced feed pallet., Previously installed on: COURTOY R100
Sector filling cam F12 2 for COURTOY R100, Reference COURTOY: R100 30 36 EURO KP F12 2
COURTOY Compressor Turret Type R100 24 stations Type D, Previously installed on: COURTOY R100 24, Compatible: COURTOY R100
COURTOY Compressor Turret Type R100 30 stations Type B, Previously installed on: COURTOY R100 30, Compatible: COURTOY R100
ERMI Holland BV
