solna offset sweden used for sale

Offset press Rotaprint R 45 K in very good condition

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...

Sheet thickness: 65,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id    5337 MAKE         Roundo Sweden TYPE           PAS 650 YOP             1991 SPECIFICATIONS Hydraulic / Mechanical        Hydraulic          3 or 4 roll       4 roll Maximum sheet thickness       65 mm Bending length       3000 mm Max. Rolling capacity Ø 2.500       60 mm Max. Prebending capacity Ø 2.500        50 mm Top Roll Ø       650 mm Bottom Roll Ø     650 mm Side Rolls Ø      530 mm Working speed M/Min.    5 M/min. DIMENSIONS Length       7000 ...

Sheet thickness: 4,5 mm Bending length: 1540 mm Number of rolls: 3   MACH-id    5011 MAKE         NOSSTEC LUNA Sweden TYPE           8266 15/45 YOP              1997 SPECIFICATIONS Hydraulic / Mechanical     Mechanical 3 or 4 roll        3 roll Bending length         1540 mm Max. Rolling capacity Ø 2.500     4.5 mm Max. Prebending capacity Ø 2.500      3.5 mm Top Roll Ø     120 mm Bottom Roll Ø      120 mm Side Rolls Ø        120 mm Power        1,1 kW DIMENSIONS Length       2100 mm Width         1000 mm Height        1200 mm  ...

Plate Scanner Machine No.: 34373 Size: max. 102cm Plate Scanner/Plate Reader for Heidelberg Speedmaster SM 102/SM 74, SM 52, Plate Image reader, for measuring the printing part of the surface of offset plates and stores the measured values on the job memory card or in the CPC data memory, for on-line transfer of the values to the press's control unit (for calculation of ink fountain zone openings and ink stripe widths in CPC 1 control unit), for all types of printing plates up to SM 102 format plates

Capacity: 13 t Stroke: 1500 mm Material thickness: 6 mm Diameter flange/disc maximum: 0 mm Day light: 0 mm MACH-id   4143 MAKE        ROUNDO Sweden TYPE          F 13 C YEAR         20... SPECIFICATIONS Throat        1500 mm Maximum sheet thickness Steel      13 mm Maximum sheet thickness Alu    15 mm Max. Bank ø in the gap       3000 mm Power         7.5 kW DIMENSIONS Length       3000 mm Width        2000 mm Height       2000 mm

Printshop Package: Folding machine Horizon AFC-504 ACT - with perforating device, or double central cut - 2 swords - folding from DIN A 3 to DIN long possible - Fold types preset under program control - only run with small editions - compact design 4-color offset machine Heidelberg GTO VP 52 convertible 2/2 front and back printing Plus version year: 1986 - ALCOLOR with BALDWIN cooling unit - CPC 11.01 - Grafix powder device Replacement, 6 new rollers like photo Brochure production line Two towers Horizon MC-8 SPF-10II - FC-II - 1 loop stitching, - Accessories for small formats, corner stapling possible - 1 vibrator (collect carbonless records, etc.) - German Manual cutting machine Polar EM 76 - with air table facility - 2 HD knives - Control panel board 2016 new - with hydraulic scissor lift table - shaker Offset printing machine Manufacturer: H ...

Used electric punching and binding system for plastic binding. For the fast and practical creation of brochures and documents in small to large runs. Binds up to 480 sheets Diameter adjustment guarantees easy opening and closing of the binding element, for perfect presentations Rotary knob to adjust the edge spacing Specially hardened punches for sustainable use Offset punching punches for a better punching result Highest format flexibility thanks to QSA technology, e.B. between DIN A4 and A5 Adjustable side stop for ideal punch adjustment Easy-to-empty waste drawer Built-in dimension scale for document or binding element size Robust construction and compact design

max. wheel diameter: 400 mm gear width: NA mm max. module: 1 min. module: 10 total power requirement: 12 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total ele ...

CNC punching machine make EDEL type Microcut 211Machine -No: 30287 Year 1998Punching force: 200 kNDirect working area: 1500 x 1000 mmTool size up to: 100 mm diameter, as well as forms: within this circular areaMaterial thickness up to: 4 mmfree passage up to approx. 30 mmWiper system: sprungTool System:: Noble Quick Change ::: Tool head 30x120 / 146x40Total connection value: up to: 16 kVA (400 V, 50 Hz) Protection class: IP54, control voltage 24 V,: DCWidth x depth x height: 3350 x 3750 x 1800 mmWeight: 7500 kgIncl.:- Mechanical and control technology REVO - M Basic equipment for the use of turret tools- ram stroke programmable (instead of manual adjustment)- CNC LOGO and programming with workpiece graphics- 1 set of set-up elements with leveling device- CNC CAD programmer software in standard version- 6-fold Rev. tools- Tools for Rev. Ø 4,2 - Ø 6,5 - Ø 8,5 / right 18x6 wide side fron ...

Metal lathe make GRAZIANO type SAG 210Technical specifications:Distance between centers: 1000 mmCenter height: 210 mmCircumferential diameter over cross slide: 268 mmCircumferential diameter in the crank: 580 mmSpindle bore: 57 mmBed width: 330 mmLength of the offset with the driving flange: 316 mm24 spindle speeds: 38 - 2000 rpm.80 longitudinal feeds: 0.020 - 0.44 mm80 cross feeds: 0.010 - 0.22 mm40 WW thread: 46 - 340 metric pitches: 92 - 640 module thread: 0.25 - 2.875 mod.Leadscrew pitch: 3/8 Rapid traverse: 6000 mm / minDrive power: 7.5 kWDimensions: 2700 x 1400 x 1370 mmWeight approx: 2270 kgWith- three-jaw lathe chuck- Multifix steel holder with several inserts- fixed bezel- moving center point- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Error ...

Facing lathe make HEYLIGENSTAEDT type 405 EVMachine -No: 581242229/189623 Year of construction 1965 with sliding upper bedTop width: 1750 mmTop height from the underbed: 405 mmTurning diameter over bed: 810 mmTurning diameter over bed slide: 620 mmTurning diameter in the crank: 1500 mmLength of the offset in front of the faceplate: 750 mmCamber width: 0 - 400 mm18 spindle speeds: 9 - 450/14 - 710 rpm.42 feeds: 0.09 - 5.6 mm / rev42 flat feeds: 0.045 - 2.8 mm / revFaceplate diameter: 800 mmSpindle bore: 86 mmBed width: 540 mmDrive power: 14 kWDimensions approx: 4000 x 1500 x 2200 mmWeight approx: 6,0 tWith- new main spindle- sliding upper bed- Faceplate Drm. 1200 mm- Faceplate Drm. 800 mm- Multifix steel holder with 3 cassettesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bind ...

Facing lathe Fabr. RAVENSBURGMachine -No: 7416, built in 1974Faceplate diameter: 1000 mmCenter height in the offset: 930 mmTurning diameter in the crank: 1860 mmTop height ü. Support: 450 mmTurning diameter ü. Support: 900 mm12 spindle speeds: 6 - 270 rpm.24 autom. Feed rates: 0.04 - 2.82 rpm.Support - Longitudinal travel: 1250 mmSpindle bore: 80 mmDrive power: 15 kWExternal dimensions: 4000 x 1500 x 1800 mmWith- Face plate 1000 mm Drm.- Quadruple steel holder- Support travel longitudinally and transverselyused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

max. wheel diameter: 400 mm gear width: 0 mm module: pinion diameter - max.: 254 mm axial cross angle: 90 ° total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is loaded with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automat ...

Folding carton boarding machine Uhlmann C 100 LB • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Product feed for blister via blister stack shaft • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding carton code, 1x brochure absence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color Tuach Panel - Code reader Cognex - Validation documentation

MULTIVAC R-5100 ID.NO. 2126 Multivac R-5100 packaging machine with associated Mr equipment. Gas machine, built-in vacuum pump, 1x punch, Reel for plastic foil, Heatvac plates. Foil width 422 mm, Offset 265 mm, Tools 2.1 225 x 175 mm Max depth 140 mm. Dimensions machine 550 x 90 H 165 cm.

DESCRIPTION: • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Centrally adjustable cup chain • Product feed for blister via blister stack shaft • Monitoring of packaged goods height in cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with anti-ejection control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz

package from one place in austria: 1-color Offset printing machine Manufacturer: HEIDELBERG Model: GTO 52 Year: 1983 Format 35 x 52 cm Counter: 37000000 Location: Austria Pile Turner Manufacturer: Polar Model: PW1 Year: 2000 format 540 x 740 mm Load capacity 500 kg Location: Austria package Price: on request

2-color offset printing machine Manufacturer: Heidelberg Model: GTO ZP Year: 1979 maximum format: 320 x 460 mm Counter: 27800000 Condition: very good. In use. Efficient. Location: poland Price: on request

COVER OFFSET PRINTING MACHINE W+D 232 M. No.: 16035 Format (mm): 229x162 Max. Speed: 560 pcs / min. Paper weight (g / m2): 90 Counter : 53000 /h Performance data // Technical data The specified values are listed as the machine-technical performances using original W + D format parts and components. The achievable performance in practice depends on various parameters beyond our control, e.g. on the characteristics of the materials to be processed, the product and blank shape, window size and position of the windows, feed direction, position and type of the closure flap, as well as the print motif and printing ink. STANDARD The machine is used to print on both sides of pre-made envelopes and mailers with conventional offset printing inks. The printing units are arranged in satellite form around a central counterpressure cylinder. Power: Perfecting: Max. 1200 envelopes per  ...

3 MONTHS LA-POSTPRESS WARRANTY Excluding electronics Offer consisting of: Horizon ST-20 Stacking table - Stacking options: smooth or laterally offset - Compatible with: Horizon MC-80a Horizon VAC-100a Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600 - Format: 450x310mm; min. 185x128mm; - Stack height: max. 320mm - Dimensions: 652x550mm - Weight: 62kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

max. web width: 370 mm - unwind for paper rolls, max. unwind 40' web guide and 1 pneumatic shaft - dancer controlled pneumatic brake - 4 wet offset printing units with conventional dampening - cylinder circumference 16 2/3' fixed size - reel rod blanket cylinder - each inking unit can be declutched - circumferential register for straight web path from central control table, variable with curser - optical web break detectors - central dampening water circulation system - roller washing device - drip oil lubrication - perforation and cutting station - Remaliner punching and file hole punching - rewinder for max. paper diameter 28' (70 cm) and 1 pneumatic shaft 70mm - strobe light - cross cutter (sheeter) - turn bars for reverse printing - plate bender - electric power supply: 380 V, 3 Phasen, 16 kW - length of the machine: 7,9 m - speed: max ...

Cardboard press, paper press Horizontal version bale size 60x70x70 cm with cutting device Make HSM 14 to Presskraft older model year unknown. Very comfortable due to Insertion shaft and cutting device. The finished bale can be placed directly on a Pallet can be pushed out. Has a large hydraulic agregat runs very fast and quiet. Sale without guarantee/liability or warranty for VB 3.600,--€ plus VAT VAT. Peter Knam Sweden 7 D-88085 Langenargen peterknam.de 07543/4242

Scania emergency generator set 365 / 400 kVA NEW - Year of construction 2023 - - - - - Engine: - Scania (Sweden) - Model: DCI13 - 6 cylinders -Diesel -Water-cooled - 1500 rpm - Power: 435 hp - - - - - Generator: - Leroy & Somer (France) - 365 / 402 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / switching unit: - Digital starter unit with display - with automatic start function - Generator monitoring: volts, amps, hertz, hydrocarbons - Motor monitoring - - - - - Other data: - Dimensions: 456 x 196 cm - Weight: 4550 kg - Tank volume: 990 liters - Sound level: approx. 67 dB +/- (7m) - Fuel consumption: 36.5 l/h (50%) / 52.6 l/h (75%) - - - - - Scope of delivery: - Scania generator set 365 / 400 kVA - in soundproofed housing - with start-up unit / controller -Tank -Battery - Exhaust / silencer - - - - - Price a ...

KOMORI LS 1029 P (10/0-5/5) from 2008 A 10 Colors Offset Printing press of size 53 x 75 cm Option ; PQC with PDCS II Color Measurement, KomoriMatic with Technotrans Recirculation & Refrigeration Ink Temperature Control (Technotrans BETA C), All Auto. Washers, APC, AMR Auto. Size setting and Double Sheet Control, KHS KMS II Chromed Ceramic Cylinders and Perfect Jackets impression Cylinders PERFECTOR 10/0 - 5/5, CIP Connection, Weko powder spray Condition ; Nice Condition, 98 Mio. Impressions, Immediately available

Rounds: 180 mm Squares: 0 mm Flats: 0 mm Flats on edge: 00 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   MACH-id    5346 MAKE        ROUNDO Sweden TYPE          R-6-S YOP            1992 SPECIFICATIONS Horizontal and vertical        H + V Shaft Ø     180 mm Power      15 kW Working speed       0-7 mm/min. DIMENSIONS Length        2400 mm Width          2000 mm Height         2000 mm

Sheet thickness: 22,00 mm Bar diameter: 0 mm Punching size: 0 mm (1) hydraulic / (2) mechanical: 1   MACH-id   3615 MAKE   Mubea - Muhr und Bender - Sweden TYPE   HIW 1000 / 610 YEAR   2005 SPECIFICATIONS Throat  610 mm Maximum sheet thickness Steel   40 x 22 mm Stroke´s No./ Min.  0 - 70 DIMENSIONS Length   2200 mm Width   1050 mm Height   1830 mm

Process vessels Manufacturer Zetterströms Sweden Capacity 120 liters Year of construction 2001 Pressure-resistant up to 8 bar Hermetically welded stainless steel insulation heatable by means of a heating element on the underbody Agitator 2,850 rpm at 0.55 kW, Operating temperature 100 °C

MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...

2 color offset press Manufacturer: Heidelberger Model: Speedmaster SM 52-2P year: 1996 Equipment: fully functional with all printing-related Equipment Counters: 40,879,925 Price: on request

Turning machine make TOS type Galanta Zyklotronic HAD 40/75Machine -No: 400507596001 Year 1996Turning length: 750 mmTop height: 230 mmCircumference diameter over bed: 400 mmCircumferential diameter over cross slide: 230 mmCircumference diameter in the offset: 460 mmSpindle mount: DIN 52027 / B 6 CamlockSpindle bore: 50.8 mmSpeed range: 20 - 3500 rpm.Feed: 0.001 - 9999 mm / min.Rapid traverse: 6.0 / 3.0 m / min.Drive power / connected load: 7.5 kW / 13 kVAWeight approx: 1760 kgOutside dimensions approx: 2100 x 1200 x 1725 mmWith- CNC control FAGOR 800 T CNC- 3-jaw chuck- revolving center point- Multifix steel holder with multiple insertsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for ...

max. tool diameter: 400 mm : 180 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

Roundness tester make MITUTOYO type Roundtest RA 122Code no. 211-941D, serial no. 920069 built in 1992consisting of:MEASURING UNIT RA 1001 control and evaluation unit RE 12 buttons No. 211-046Technical specifications:Turntable: air-bearingMeasuring range / workpiece diameter: 280 mmMeasuring range / workpiece height outside: 220 mmMeasuring range / workpiece height inside: 110 mmRoundness of the turntable: 0.08 + 6 H / 10000 µmSpeed: 6 rpm.Table diameter: 110 mmCentering range: +/- 2 °Leveling range: +/- 1 °Weight: 32 kgDimensions L x W x H: 252 x 404 x 545 mmBUTTONMeasuring range: +/- 0.25 mmStylus radius: 1 mmMeasuring force: 70-100 mNCONTROL AND EVALUATION UNITFilter: 15, 50, 150, 500 oscillations / revMeasuring range max .: +/- 250 µmMagnification: 100 x - 20000 xautomatic compensation: eccentricity, coaxialityParameters: roundness, center offset: Top height, valley depths, evenn ...

max. tool diameter: 400 mm : 310 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

plate thickness: 5,0 mm turning speed range: 1500 / 3000 U/min diameter of brush: 250 mm width of brush: 80 mm voltage: 380 Volt total power requirement: 2,4 / 3,0 kW weight of the machine ca.: 175 kg dimensions of the machine ca.: 700 x 460 x 1200 mm Description : RASAMAX DUO was specially developed for the fast and reliable developed for deburring straight sheet metal. The deburring machine has two counter-rotating deburring brushes that two offset levels. With this principle, upper and Lower edge of sheet metal deburred simultaneously in one operation. This means up to 50% time savings compared to other methods! RASAMAX DUO is suitable for deburring individual pieces and small series and designed with its robust construction for continuous use. Furnishing: - efficient deburring of straight sheets - for steel, stainless steel, non-ferrous metals The data for this ad was created with  ...

We offer a Peri Trio formwork system 233,28m² complete with accessories. The formwork is in a completely mint condition and covered with new original Peri Finply, or plastic formlining Hewagen II. The frames are completely cleaned and sealed with zinc phosphate coating corrosion. The formwork is immediately suitable for higher-quality applications, e.g. SB3. Other elements or accessories available on request. 18 Element TR 270 x 240 new formlining 14 Element TR 270 x 120 new formlining 8 Element TRS 270 x 90 new formlining 6 Multipurpose element TRM 270 x 72 new bel. 4 Element TR 270 x 72 new formlining 10 Element TR 270 x 60 new formlining 8 Element TR 270 x 30 new formlining 6 corner TE 270-2 new formlining 160 Richtschloss BFD, dir. 30 compensating bars TAR 85 new 2 offset hooks Maximo 1,5 T new 1 transport hanger MX / Trio new 12 frontal anchors TS, dir. n ...

+ + + Availability / Delivery time / Pre-order + + + Due to the high demand, this model is currently sold out in stock. Further devices have been ordered at the factory and are in production. The current, estimated delivery time is about 5-7 months (+/-). --> A pre-order can be placed Net price: 43.500,- € gross price: €51,765 - - - - - Scania emergency generator set 500 / 550 kVA NEW - Year of construction 2023 - - - - - Engine: - Scania (Sweden) - Model: DCI13 - 6 cylinders -Diesel -Water-cooled - 1500 rpm - Power: 582 hp - - - - - Generator: - Leroy & Somer (France) - 500 / 550 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / switching unit: - Digital starter unit with display - with automatic start function - Generator monitoring: volts, amps, hertz, hydrocarbons - Motor monitoring - - - - - Other data: - Dim ...

Offset GTO 46 Plus , good condition

Slotted tiller manufacturer ROTOX type FWS 386Fabr. -No: 386166, built in 1989for simultaneous milling of 2 offset slots in aluminum profiles1 milling motor: 0.6 KW2 wheel motors: 0.5 KWWeight: 200 kgSpeed: 17200 rpmWith- Cooling lubricationused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Duplo Docucutter DC 615 Multifinisher Year of construction: 2012 Meter reading: 245' Incl. dongle, user manual, etc. -> free truck loading! see pictures Technical data DocuCutter Duplo DC-615: Longitudinal and cross-section and grooves in one operation min. open format: 210 x 210 mm open format: 320 x 460 mm min. final format: 48 x 85 mm final format: 320 x 460 mm Number of knives: 6 incisions / arches: 6 cuts / sheets: 15 creases / sheets: 10 Double sheet inspection Barcode Reader automatic offset correction Suction air feeder Attachment capacity: 100 mm Grammage: 110 - 300 g/m² Speed: 9 sheets/minute (A4, 2 cuts, 1 groove) Digital programming with program memory up to 80 jobs can be stored 230 volts / 0.7 A Weight: 132 kg Dimensions (approx.): 160 x 63.5 x 106 cm Cutting and creasing in one operation! Fully automatic multifinisher with job memory, easy t ...

Water slot cutter Fabr. ROTOX Type FWS 386Fabr. -No: 3866160, year of construction 1993for simultaneous milling of 2 offset slots in aluminum profiles1 milling motor: 0.6 KW2 wheel motors: 0.5 KWWeight approx.: 200 kgSpeed: 17200 rpm.With- Cooling lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sumab 750, 30-120 t/h. (Sweden). Mobile crusher on a caterpillar chassis with a magnetic block for sorting metal. Jaw Crusher - 700x500mm Entry with Single Jaw (28" x 20") Grooved cheeks 6 tons (2700 pounds) Hydraulic wedges with spring rod lock and reverse Drive function Electric motor 45 kW (60 HP) V-belt and drive pulley Hopper - 3-sided reinforced construction, Hardox lining Conveyor - Double electric drive 1.5 kW (2pcs. 2HP) Magnet - electric drive 1.5 kW (2 HP) Controls: Electric control panel with push buttons with contactors and relays Remote Wireless remote control to stop/start the feeder Controls - Electric control panel with push buttons with contactors and relays Plant capacity - fraction size / tons per hour 40 mm - 30-40 t/h 50 mm - 45-50 t/h 60 mm - 45-65 t/h 70 mm - 55-75 t/h 80 mm - 70-90 t/h 90 mm - 80-100 t/h 100 mm - 90-120 t/h

Tire balancing machine make HAWEKA type BALCO 9460Fabr. -No: 0507.602.8007.16Technical specifications:max.wheel diameter: 950 mmmax.wheel width: 530 mmmax.wheel weight: 70 kgRim width: 76 - 510/3 - 20 mm / Measurement time:> 6 sec.Measurement speed:

Printing and packaging machine for labels and continuous forms with 2 dry offset units, integrated UV final drying (2x), Eltromat and register control pressure for perforation. Working width: 520 mm print width: 510 mm Appendix: Roll Delivery: stack or sheet (A4 or A5), Shed delivery, smallest sheet 4" Printing units: dry offset; 2 x 24" and 1 x 25" (Color assignment: 2/0 or 1/1, but only UV drying, i.e. only on the front) Punching cylinders: Punch "top" (VS): 23 2/6" and 24" – 1 cylinder punch each "bottom" (RS):23 2/6", 24" and 25" – 1 cylinder each Perforation: Longitudinal: only continuously or arbitrarily over punching plate, Transverse: (two cylinders of the same format can be used at the same time can be used!) 16" - 3 cylinder part. 4" 17" – 1 cylinder part. 4 ¼" 18" – 1 cylinder part. 4 3/6" 20" – 1 cylinder part. 2 1/2, 5" 22" – 1 cyl ...

Tire balancing machine make HAWEKA type BALCO 9460Fabr. -No: 0507.602.8007.13Technical specifications:max.wheel diameter: 950 mmmax.wheel width: 530 mmmax.wheel weight: 70 kgRim width: 76 - 510/3 - 20 mm / Measurement time:> 6 sec.Measurement speed:

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...

Min-max cutting width: 250-1150 mm Max reel width: 1200 mm Reel weight: 1100 kg Internal core: 70/76 Max reel diameter: 1050 mm Max speed: 195 m/min Power 400 V, 50 Hz Air 6 bars Double reel unwinder Double photocell/register control Touch screen control panel for cutting on size starting from reel to sheet Materials: ALU, plastic film, paper from 10 to 250 grs, laminates and tissue paper, paper + cardboard, adhesives, shoppers paper, gift paper, offset paper, wrapping paper for pastry, washing etc.. plastic film from 30 to 200 my like PE, pvc, PP, polyester, celluloid, others Electronic counter of pieces

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

Stainless steel Intended for transporting cassettes with dimensions of 600x400 mm Six polyamide wheels, offset in height for control Carrying capacity: 400 kg Dimensions 65 × 42 × 16 cm

CNC machining center including laser edge type BIMA / Gx50 / E / 160 / 630 Specifications: IMA gantry machine in real GANTRY design Processing area: • Length in X direction with all aggregates (mm): 6300 • Width in Y-direction with all aggregates (mm): 1600 • Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the maximum workpiece thickness depends on equipment/application • Length in X direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm • Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm • Width in Y-direction with edging (mm): 1600 • Length in X-direction Single user processing without gluing (mm): 2 x 3050 • Length in X-direction free space center (mm): 200 • Length in X-direction Single user processing with gluing (mm): 2 x 2 ...