soco system used for sale

Single-end machine for cleaning glass bottles., Additional title: Bottle washing machine, Capacity: 3000 bottles/h, Length: 4,43 m, Width: 2,60 m, Height: 2,52 m, Base construction: Single-end machine, Features: Feed table; bottle feed; pressure filter; side window; heat exchanger; overflow pump; lye pump; water pumps; temperature gauges; control cabinet with control panel

The repackaging system is used to unpack glass bottles from pallets containing full module boxes, repackage them into ‘open basket’ carrier boxes holding four bottles, and repack them into pin-partition crates with palettising. The system consists of the following individual machines: 1. Depalletising of full module crates / repalletising of empty module crates: Here, pallets containing full module crates are fed in and destacked, whilst empty crates are stacked and transported out. 2. Repackaging machine: Here, 20-unit module boxes are unpacked, 4-unit carrier cartons are unfolded and filled with bottles/packed. 3. Packing into pin-partition crates and palletising: Here, the 4-unit carrier cartons are packed into pin-partition crates, stacked onto pallets, and transported out of the system., Additional title: Repackaging of full pallets containing modular crates into pallets contain ...

Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Complete mixing tank system comprising three vertical pressure tanks, each with two cooling zones, frame insulation, a bottom-entry agitator and various fittings. One of the tanks is also equipped with a CO₂ gas injection unit and a pump for tangential feed. A pipe fence, pipe panel, control cabinet and various measurement and control equipment and pumps complete the system., Additional title: Insulated, coolable stainless steel pressure tanks as a mixing system with proce, Volume: 33000 l per tank, Max. pressure: 2 bar, Pump capacity: 28 m³/h, Operating temperature: 40 °C, Length: 2600 mm, Width: 2600 mm, Height: 8500 mm, Weight: 3900 kg, Operation / Control: Rush-Flow-Dosing: SPS-Typ = C7-633, HMI = ProTool, Material: stainless steel 1.4301, Position: free standing, Base construction: Cylindrical tank with dished ends and pipe feet on spherical caps, Features: 2 zone frame cooling, ...

Kieselguhr dosing system for beverage filtration. Consisting of a mixing tank, pumps and various other components., Additional title: Dosing system comprising a mixing tank, pumps and other equipment, Capacity: 25000 l/h, Vessel volume: 500 l, Power: 2,42 kW, Voltage: 220/380 V, Frequency: 50 Hz, Material: stainless steel, Position: vertical, Features: agitator, sight glass, level indicator, precoat pump (80 hl/h against 2 bar), piston metering pump (36 hl/h against 8 bar), hinged lid, carbon dioxide fumigation, dust extraction device

Malt milling with 4-roller grist mill, Additional title: 4-roller mill with conditioning and malt transport, Capacity: 4 t/h, Operation / Control: Siemens Simatic S7-300, Features: 3 x silo discharge, small; 4 x silo discharge, large; malt transport; blower; malt scales; malt conditioning; malt mill, 4-roller; control cabinet and control system

Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually, Additional title: with switch cabinet and CIP tank, Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system

Complete vacuum evaporation system type SchoKo, with: -Expansion evaporater/vacuum tank -steam condensator -different pumps and fittings, Additional title: vacuum evaporation system, Knockout capacity: 13000 l, Volume of vacuum tank: 1471 l, Length: 2006 mm, Width: 2006 mm, Height: 2503 mm

NH3 refrigeration system for cooling glycol and brewing water, consisting of the following components: - NH3 separator brewing water 890 l (T0 = -0.5°C) - NH3 separator glycol 647 l (T0 = -6 °C) - 3 x piston compressors (Bitzer type W4GA) - 2 x brewing water pumps - Plate heat exchanger as brewing water cooler Q0 = 200 kW - Evaporation condenser - Water tank approx. 470 hl - Glycol tank 80 hl + 2 x glycol pump - Plate heat exchanger as glycol cooler Q0 = 100 kW - High pressure collecting vessel 830 l - Danfoss frequency inverter type VLT HVAC, Additional title: NH3 Cooling plant, Cooling capacity Q0 brew water: 200 kW, Cooling capacity Q0 glycol: 100 kW, Evapotation temperature t0 brew water cooling: 0 °C, Evaporation temperature t0 glycol cooling: -6 °C, Current: 185 A / 250 A, Features: 2 x NH3 separators (t0 = -0.5 °C; t0 = -6 °C); 3 x piston compressors; 2 x brewing water pumps ...

System for the secondary filtration of beer after the Kieselguhr filtration., Operating pressure: 10 bar, Operating temperature: 140 °C, Volume: 169 l, Length: 4,10 m, Width: 1,30 m, Height: 2,0 m, Weight: 1700 kg, Material: stainless steel, Position: standing, Base construction: Frame, Features: Trap Filter, Beer filter, Water / CIP Filter, Unit for filter flushing and chemical regeneration.

() is equipped with an insulated - and is ideal for industrial cooling processes. It has two powerful fans and integrated piping and controls. The coolant is glycol, and the refrigerant used is R-410A. The system offers a cooling capacity of 14 kW at an . () . (). The 5.5 kW electric motor operates at 380–415 V, 50 Hz, and 20 A current consumption. This compact unit enables efficient, reliable cooling in industrial processes. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: externally mounted cooling unit with glycol buffer storage tank, Cooling capacity: 14 kW, Pressure compressed: 4,2 bar, Pressure relaxed: 1,9 bar, Gross volume glycol buffer tank: 400 l, Power: 5,5 kW, Current: 20 A, Voltage: 380-415 V, Frequency: 50 Hz, Features: Cooling unit with 2 fans, glycol storage tank, piping, control system

Ice water generator for cooling supply of wort cooler (2nd stage), fermentation cellar (= 100 hl capacity), storage cellar (= 320 hl capacity) and pressure tanks (= 260 hl capacity) in a microbrewery with 20 hl output., Additional title: ice water generator, Cooling capacitry: 14 kW, Power: 6,2 kW, Length: 1600 mm, Width: 1600 mm, Height: 1800 mm, Position: free standing, Base construction: cylindrical tank with refrigeration unit on top, on square tube frame with domes, Features: insulated stainless steel tank with side cover, semi-hermetic reciprocating piston compressor, copper tube coil exchanger, control box, cooling water pump

Extraction system for removing dust from the ambient air. The motor drives a fan impeller, creating negative pressure. The air is sucked into the machine via the intake manifold and reaches the filter elements. The treated air is then blown out again., Additional title: Workshop dust extraction, Nominal flow rate: 1400 m³/h minimum flow rate: 1,108 m³/h, Power: 2.2 kW, Current: 5 A, Voltage: 400 V, Frequency: 50 Hz, Base construction: on a mobile frame, Features: 140 mm intake manifold; air filter (category C el. lt.); asynchronous motor (manufacturer EMGR)

Air compressor including compressed air dryer and oil trap with oil-water-separator. air compressor: - volume rate of flow: 8,02 m3/min - stage pressures: 13 bar g - suction pressure: 1 bar - installed motor capacity: 45 kW, Additional title: Compressor with refrigeration dryer and oil separator, Capacity: 8 m³/min, Stage pressure: 13 bar, Suction pressure: 1 bar, Drive: 4250 rpm, Power: 45 kW, Current: 97 A, Voltage: 400 V, Frequency: 50 Hz, Length: 1,80 m, Width: 0,92 m, Height: 1,80 m

Oil-free wisAIR air compressor including refrigerated air dryer and air filter. Air compressor: - Max. working pressure: 13 bar - Capacity: 146.5 l/s - Motor power: 55 kW Stationary, single-stage screw compressor with water injection, driven by a speed-controlled electric motor. The compressor is enclosed in a soundproof housing. Condensate is drained automatically., Additional title: Oil-free screw compressor with refrigeration dryer and compressed air filter, Capacity: 8,79 m3/min, Max. working pressure: 13 bar, Motor drive: 5200 rpm, Power: 55 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 2,60 m, Width: 0,97 m, Height: 2,00 m, Weight: 1195 kg, Features: Screw compressor; Refrigeration dryer; Compressed air filter

Manufacturer: FAMIX Type: 6000 Year of Manufacture: 1993 System Description The FAMIX 6000 is a two-component soft drink mixing system designed for the production of high-quality carbonated beverages. It combines water deaeration, precise syrup dosing CO2 carbonation, and product transfer in a single integrated unit. The system operates with vacuum degassing and pressure carbonation, and is capable of handling a capacity range of 2,000 to 12,000 litres per hour. It can be run with or without CO2 and is convertible from two-component to multi-component configuration Condition Due to the age of the equipment, the system is sold as-is without warranty. Installed Components Dosing Pump: - Bran+Luebbe (Alfa-Laval) - N-C 32, - 5.5 kW, 11.5 A, 400 V Pressure Pump : - Hilge Hygia Bloc I/20A, - Motor 1.1 kW Centrifugal Pump : - Hilge Hygiana I/2, - Motor 1.5 kW Vacuum Pump: - Sieme ...

A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement.

Viscon B.V. pallet transport storage system, consisting of: (4x) Viscon B.V. pallet lifter, lifting platform: 1550 mm x 1250 mm. 4 floors with 22 lanes, each lane 22 pallet places, distance between floors: 2550 mm. (8x) lane dividing conveyor, dividing platform: 1240 mm x 1480 mm. total dimensions storage: 37250 mm x 11500 mm x 12000 mm.

Trumpf TruLaser Robot 5020Year of manuf. : 2010 ____________Description:TruDisk 3302 laser system:- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad:- Output power of 3.3 kW at the workpiece:- Laser system with 1 cavity:- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control:- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data:- Fast laser power control:- TruControl 1000 control system:- Storage capacity for 199 laser programmes:- Safety monitoring in accordance with laser safety class 1, including a central safety lock:- Protection class IP54:- 10.4 panel computer with TFT touchscreenExtension of the beam path:Plus 1 additional laser light cable output, including interface card:consisting of::# Optical a ...

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

Incro BelugaYear of manuf. : 2021 ____________Description:Technical Data:Capacity (max.):2.500 l/h

Used Diversey automatic CIP systemTechnical Specifications & Performance DataThis Clean-In-Place (CIP) system is designed to deliver reliable, repeatable sanitation for beverage production and industrial packaging processes. With three dedicated tanks and fully automatic operation, it streamlines cleaning cycles across process circuits, fillers, pasteurizers, and associated pipelines. The system’s electric heating ensures precise temperature control for effective caustic and rinse phases, supporting consistent hygiene standards on second hand and used bottling line installations.System type: Clean-In-Place (CIP)Year of manufacture: 2012Automation level: Fully automaticHeating method: Electrically heatedPower rating: 15 kWElectrical requirements: 380V / 50 HzNo. of tanks: 3Tank volumes: 2 x 1.0 m³ and 1 x 0.5 m³Total tank capacity: 2.5 m³Application: Beverage production and indust ...

Technical details Type: Overhead trolley busbar power rail system Configuration: - Enclosed conductor rail system - Aluminium busbar housing - Mobile power collector trolley - Ceiling suspension brackets - Support hangers and fixing hardware - Connection joints and end sections Construction: - Red insulated conductor rail sections - Industrial-grade electrical distribution system Application: - Garment manufacturing lines - Textile production facilities - Sewing lines - Automated workstations - Material handling systems - Mobile machinery power supply - Industrial production lines Estimated total rail length: Approx. 15–25 m Collector trolley: Included Mounting hardware: Included Condition: Used, good condition Observed condition: - Rail sections appear straight - Collector assembly present - Suspension brackets included - No visible impact damage - Disman ...

PL 1000 EDGE DYEING SYSTEM With four interchangeable heads EDGE CLEANING SYSTEM CM 1400 Web width 20 mm ADJUSTABLE TABLE PL 2000 Maximum capacity 50 kg Auction-ID: A7-47908-603

HIGH VACUUM TORCH EXTRACTION MINIVAC Auction-ID: A7-48150-112

Auction-ID: A7-47908-515

Auction-ID: A7-47908-800

- Mobile sand dosing station for machería. - System consisting of two upper sand storage hoppers. - Travel trolley on rails for feeding several machines. - Motorized movement between working positions. - Timed dosing system. - Includes raised metal structure for support and access. - Electrical panel with SIEMENS SIMATIC HMI display and SIEMENS PLC automation. - Application for automatic feeding of foundry core manufacturing machines. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-9

Technical details Manufacturer: Brétaudeau Déposé Systèmes Model: 221 PBP Type: Pneumatic positioning / placement press workstation Year: 2011 Serial number: 73 Weight: 50 kg Actuation: Pneumatic Configuration: - Large flat work table - Pneumatic vertical actuator - Foot pedal control - Pressure regulator and gauge - Vacuum-assisted table system - Positioning spindle/tool head - Bench-mounted workstation design Application: - Label positioning - Patch placement - Embroidery positioning - Heat-transfer preparation - Garment component placement - Textile manufacturing operations Construction: - Steel workstation frame - Pneumatic control system - Integrated work surface Condition: Used, good industrial condition Observed condition: - Complete workstation present - Pneumatic circuit appears intact - Pressure gauges installed - Foot control present - Wor ...

Worktable size, 1600 × 600 mm Frequency 50 Hz Electrical power 6.5 kW Current consumption 13 A Oil pressure 9 bar Air pressure 8.5 bar Auction-ID: A7-47908-523

Heidelberg GTO 52, year of manufacture 1983, totaliser reading 13.4 million,, conventional dampening unit (Molleton),, Plus version including numbering device, KVE 52 in-line coating system (for full-surface and partial coating), ADNOS 1UV46 UV curing unit (for curing UV inks and varnishes)

Manufacturer: MYCRONIC Model: My600 JP Year of Manufacture: 2024 The MY600 represents the top of jet-printing technology, enabling precise and fast solder-paste deposition for demanding electronics manufacturing. The machine is ideal for modern production lines with high quality requirements. Holder Units Not included Ejector Not included Auto Repair YES Glue option/SMT adhesive Can be upgraded (ejector variant) High speed Can be upgraded Shared databases Yes Board indexing Can be upgraded Fine pitch Can be upgraded Software: Latest version, which can be installed during setup FLE or Jpcam FLE can be provided My Center Can be provided Find more here - / Contact us at -

Oil cooler, air-oil cooler, heat exchanger unused. Manufacturer: SEW Type: OAC1 50-710 Year: 2020 Permissible. Temperature: 90 °C Capacity: 42 l Cooling capacity at 40°C air / 70 °C oil: 27.7 kW 380 V Pump KRACHT KF 50 68.2 l/min at 1500 rpm 4 kW Fans 1.1 kW 940 rpm Dimensions approx. 2100 x 1500 x 1200 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Laser system for particle size analysis Manufacturer: Mettler Toledo Type Lasentec_S400Q Consisting of: FBRM S400Q Control Station 2 pieces of probes PC with FBRM Control Interface Software Documentation including certificates, Software and various accessories FBRM® [Focused Beam Reflectance Measurement] is a quantitative real-time measurement that tracks the rate and degree of change in particles, particle structures, and droplets as they are actually present in the process. In-line FBRM measurement® allows engineers to quickly link the dynamics of the particle system to the processing conditions. Measure particles and droplets in real time DescriptionSample OD: 9.5 or 14mm Probe length: 91 or 206mm Drive: Electric Bearing: Mechanical Lab/Plant: Lab Field unit: Stand-alone Temperature range: -20 to 90°C (standard); -90 to 120°C (optional) Pressure: 10 bar (stan ...

Scope of Delivery 1x BWO RC910 handheld control unit Multiple subracks / slide-in frames Extensive configuration of control and interface cards Various input/output modules Connection cables and connectors Complete as shown in the photos Recognizable assemblies CNC modules Analog output modules (AO) Connection Cards (AK) Digital input/output modules Interface cards (RS232/Sub-D) Service and programming modules Various customer-specific I/O cards Technical features Modular industrial control system Rack-based design Industrial handheld control unit with display Rotary encoder (handwheel) integrated Emergency stop button on the control unit Multiple serial communication interfaces Suitable for CNC and automation applications Possible areas of application Grinding machines Machine tools Special machine construction  ...

Rhewa 82C Plus – used Used Rhewa 82C Plus scale in working condition for sale. The scale shows usual signs of wear and is offered without valid calibration. The sale is therefore expressly made as used and without guarantee for custody transfer. Auction-ID: A1-48169-6

Delivery weight 66 kg, total dimensions packaging 820x610x665 mm. Auction-ID: A1-48200-209

With built-in charger, LED work lights, blue spot rear, flash light and weighing system Auction-ID: A3-43557-384

Scania rigid with Renova interchangeable system: - Type: R340 - D-hollandia tail lift - Manual transmission - Highline cab - Spoiler set - 40 mm trailer coupling - Air horns - Light bar Auction-ID: A1-40272-22

MPS length: 3700 mm Auction-ID: A1-48006-153

Includes vision system of the «Halley Machine Vision» (Matelica - MC) Please see the .PDF files for more details Auction-ID: A7-48231-24

Continuous device, with round belt spreader belts Working width 600mm with instantaneous water heater system Fondant coating station with baffle device for stripe pattern or complete for fondant, glazes, coverture and fat glaze External dimensions: 96 x 135 Working height 90cm Connected loads 4KW 400V, 16 A - Tested and cleaned immediately available

€ 2950 net Diatomaceous earth filter from MAG, Made in Germany 3sqm, top condition. Filter area 3 sqm, horizontal screens, residual filtration, product pump. Complete with stainless steel dosing tank. Illuminated sight glasses, integrated agitator, adjustable dosing pump. Ready to use.

Auction-ID: A1-48006-129

New Victron Energy 3-Phase Storage System – 3× Multi RS Solar with 30 kWh LFP Battery (2x 15kWh LFP Battery) Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× Multi RS Solar inverter/chargers/mppt in combination with a 30 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× Multi RS Solar) • 30 kWh LFP battery: safe, low-maintenance and long service life • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management  ...

New Victron Energy 3-Phase Storage System – 3× MultiPlus-II 10000 with 45 kWh LFP Battery ( 3x 15kWh LFP Battery ) Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× MultiPlus-II 10000 inverter/chargers in combination with a 45 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 10000) • 45 kWh LFP battery: safe, low-maintenance and long service life • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and  ...

New 2026 Victron Energy 3-Phase Storage System – 3× MultiPlus-II 3000 with 60kWh LFP Battery (4x 15kWh LFP Battery) Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× 3 kVA MultiPlus-II inverter/chargers in combination with a 60 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 3 kVA) • 60 kWh LFP battery: safe, low-maintenance and long lifespan • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and moni ...

New Victron Energy 3-Phase Storage System – 3× 5 kVA MultiPlus-II with 60 kWh LFP Battery (4x 15 kWh LFP Battery) Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× 5 kVA MultiPlus-II inverter/chargers in combination with a 60 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 5 kVA) • 60 kWh LFP battery: safe, low-maintenance and long lifespan • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and monit ...

New Victron Energy 3-Phase Storage System – 3× 6K5 MultiPlus-II with 30 kWh LFP Battery Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× 6K5 MultiPlus-II inverter/chargers in combination with a 30 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 6K5) • 30 kWh LFP battery: safe, low-maintenance and long service life • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and monitoring possible via Victron ...

New Victron Energy 3-Phase Storage System – 3× MultiPlus-II 8000 with 60 kWh LFP Battery (4x 15kWh LFP battery) Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× MultiPlus-II 8000 inverter/chargers in combination with a 60 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 8000) • 60 kWh LFP battery: safe, low-maintenance and long lifespan • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and monitorin ...