smart print used for sale

<br><br><br>Still in operation: Yes<br>Available: immediately

<br>Original numbering work for Heidelberg MO<br><br><br>

6 color size 800 mm<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br><br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

8 color size 1270 mm<br><br><br><br>

8 color size 70 x 100 cm<br><br><br><br>Available: immediately

size 740 x 1040 mm<br><br><br><br>Available: short term

8-color web width 342,6 mm 9 print clambs, 8 for water colour 1 UV glue clambs for packing-Monofolie up 30µ for printing of pressure-sensitive label material bis 200µ Ceramik-Aniloxcylinder, for 120/18 bis 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Inking roller for full-size inking with cutting for slitting etc. Still in operation: Yes Available: sofort

3-color R23501/15 HOLWEG flexo printing machine model: Colorado age: 1971 available: short dated 3 printing units printing width: max. 100 cm Secare – reel rewinder Available: nach Absprache

Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...

Complete Printshop from one place in germany: Manufacturer: Heidelberg Model: GTO Year of construction: 87 Size: 32 x 46 cm Totalizator status: approx. 29,450,894 Availability: in July 2021 Manual double sheet control AntiqueStatic Simco Powder device WEKO Chromed plate cylinder 2 display trolleys Sticks of paper Rubber blankets 2 clamping bars Page marks + upright + left for small formats Support plate Bacher Controll- 1 Bacher register punch with assembly and fitting strips Plus version complete numbering and imprinting device incl. 3 numbering machines + accessories Perforation device: 2 perforation and creasing insert blocks Bracket with three leaf springs Dampening system Varn Kompac III GT 46 Year: December 9, 1994 POLAR CUTTING MACHINE High-performance high-speed cutter Manufacturer: PolarMohr Model: 76 EM Year: 1993 Availabile: end of July 20 ...

Central printing press cylinder Print width 1270 mm Roller width 600-1310 mm Processing 1000 mm Winding 1000 mm

The industrial inkjet printer EBS Ink-Jet EBS-230 was produced in 2014. The printer allows for contactless description of various objects that move, for example, on the frame of the fiber laser or on the production conveyor, etc. It is a large-scale printer (6-116 mm, DOD technology). The printer guarantees a legible and durable print on paper, cardboard, plastics (also so-called porous), on fabrics, leather and imitation leather, wood and wood-like products, on ceramic products (also so-called porous), as well as on various types of surfaces metal, etc. An industrial printer of this type is a so-called adapter for another device. It is mounted, for example, at a laser head or an industrial plotter, which cuts elements, while the printer immediately marks them. Technical specifications : - the height of the prints: 6-12.8 with a 7D head (the height of the letter is adjusted by twisti ...

Label printer Sato S8408 Mounted on a aluminium frame, inclusive mounted spool for winding labels Very neat and recent printer

HEIDELBERG GTO 52 • Year: 1988 • Size: 36 x 52 cm • Serial: 694596 • Counter: 45.396.545 • Size: 36 x 52 cm • Bacher Register 22 cm • Speed: up to 8.000 sheet/h • checked • cleaned • new rollers Good Working Condition test possible Please ask for quotation: send us an email

; ready for use

Machine refurbished & test-printed! grey model with long electrical box standard machine ink unit completely dismantled and refurbished new ink and dampening rollers Rilsan oscillator rollers replaced with NEW ones machine fully refurbished and test-printed

Printing plate punch Beil 425 stand model; good condition; Punching 425mm round; with adjustable ring visor bolts; Foot pedal; Max. Plate width 97cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

XL wide printing plate punch ( 165 cm ) for Roland and KBA presses. 4 punching modules are installed, 425 mm and 780 mm. Additional recesses and fastenings are provided for a total of 120 cm, so that a larger format can be processed; Very good, ready to use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Built in: 1999-2004 100x print roll holder available; working condition

Label printer

Produkbezeichnung, industrial ink-jet printers Manufacturer: Metronic Model: Alpha Jet Year of construction: 1998 Additional information: see also bite photo Information without guarantee

3D-SYSTEMS ProJet 660 Pro 3D Printer Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. This means that even large models can be produced without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one printing process. 3D color printers with tremendous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and detailed printouts, these 3D printers do not require dedicated support structures. The non-solidified powder supports the components during printing and is then recycled semi-automatically. Applications Communication of form and design, installation analyses, first fun ...

Eos EOSINT Here we offer an Eos EOSINT plastic laser sintering system. The following things are included with the EOS P380 system Installation space containers Powder containers Overflow container Cooler: Termo TEK Termochiller Type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Sannung 3/N/PE/ 400V AC Frequency 50 Hz Current value 8 kW Fuse 32 A MAX Power Laser 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Complete Printshop package: HP DesignJet T7100PS (42 ", 1067 mm) 3 roll feed plotter Printing capacity 9,490 m² see usage report HP DesignJet T7200 (42 ", 1067 mm) 3 roll-fed plotter Printing capacity 74,460 m² see usage report HP DesignJet Z6800 (60 ", 1520 mm) overhauled plotter Printing capacity 1,195 m² see usage report HP PageWide E77660 (50/70 ppm) with finisher (Punsh, Staples) Printer Printing capacity 258,424 (total) see consumption page HP LaserJet 4050 TN (3 trays paper feed) Printer DYMO LabelWriter 310 Printer Konica C754 (1 underfeed bin) Printer including toner (x8) € 25.00 each EFI Model: Color Profiler Spectrometer ES-1000 Spectrometer HP Sanner 4520 (42") scanner Avision AV 220 C2 A4 scanner Avision FB 2080E Scanner A3 Rowe 721-1 (folding width 96 cm) including cross folding Folding machine P ...