small lathe used for sale

Takisawa TS-3000 YS 5 axis cnc lathe Machine is in excellent condition

Doosan Puma 280M CNC Lathe C axis Machine is in good working condition

Mazak Quick Turn Nexus 150 CNC Lathe Machine is in very good condition 8 inches Length : 500 mm Turning Diameter : 300 mm

Mazak Multiplex 6100Y CNC Lathe Maximum Machining Diameter 230 mm / 9.060 in Maximum Machining Length 170 mm / 6.690 in https://www.mazak.sg/machines/multiplex-6100y/

X: 300 mm Z : 620 mm Chuck : 10 inches Part conveyor Part catcher

Samsung SMEC SL 2500Y CNC Lathe C and Y axis 10 inches 6 pieces axial live tools 2 pieces radial live tools BMT 65 turret Fanuc control unit Chip conveyor Machine is in excellent condition

Haas ST 30 CNC Lathe Chuck size : 254 mm Maximum Turning Diameter : 533 mm

Mazak Integrex 400Y 5 axis cnc lathe 12 inch chuck Turning length : 1500 mm Capto C6 holder Conveyor Machine can be seen in working condition

Doosan PUMA 280LM CNC lathe with C axis Length . 1050 mm Chuck size : 12 inch 5 live tools(4 horizontal + 1 vertical) Machine is in good working condition

Schutte 26 SF-DNT Multispindle Lathe (6 Spindles) It is in working condition

Manufacturer Index Model G 200 Year of manufacture 1999 Good condition

Smec SL 2000M CNC Lathe with c axis Machine is like new condition Machine has been used only 4 months Fanuc control unit

Index MS 18C Multispindle automatic lathe Double NCU SIR25 IEMCA bar feeder Machine can be seen in working condition

Manufacturer Tacchi Model FTC56 Year 1989 capacity 7000 x 1600 mm

Tos SUA 125 CNC Lathe The lathe can fit 1200mm with wires. Tip distance 2000mm. Includes a metric four-jaw tool. Now attached 600mm. Machine year model 2011.

MICAFIL Winding Lathe Type WBD-5 -100/300 Winding, shrinking, turning lathe / Type V-B-V Max Rotor Diameter 1800 mm Max Carriage Length: 450 mm Tray diameter: 1200 mm

Takisawa EX-110 Cnc lathe Working hour : 8949(November 2023) 10 inch chuck Fanuc control unit Machine is in very good condition

Okuma LB35 II CNC Lathe Maximum turning length: 2000 mm Maximum turning diameter : 600 mm 18 inches chuck(SMW) IGF program Machine is in very good condition Turret VDI50 holder Some tools will be given together with the machine All maintenance has been done

Mazak Integrex 200SY 5 axis cnc lathe Mazatrol Fusion 640 MT control unit Turning diameter : 540 mm Turning length: 1000 mm Tool measuring probe ATC 80 Many tools are included

Haas ST 30 CNC Lathe Chuck Size : 254 mm Maximum Part Swing : 533 mm Haas Control Unit

Hyundai WIA KIT 4500 CNC Lathe Machine has been installed in December 2019 and used 1.5 years Machine is like new condition Original conveyor Rapid Traverse Rate (X/Z axis) 30/36 m/min (1,181/1,417 ipm) Travel (X/Z axis) 450/300 mm (17.7″/11.8″) Max. Turning Dia. Ø165 (Ø6.5″) Max. Turning Length 300 mm (11.8″)

SONIM T 12 TOWER Numerical control: NUM 750 Strokes (X x Z): 300 x 300 mm 12 position automatic turret Year: 1990 Fairing, chip conveyor available (Non-contractual photo and description)

Max. Machining Diameter : 20 mm Max. Headstock Stroke : 205 mm Fedek XT-320SI bar feeder Machine is in good condition Power on : 21017 Operating time : 15223 Cutting time : 12542 Bar feeder

Mazak Quick Turn Smart 200M L Cnc Lathe Machine is in good working condition Maximum swing 660 mm Maximum machining diameter 350 mm

Maximum turning length : 2000 mm Maximum turning diameter : 650 mm Siemens driver and spindle motor VDI 50 holder Some tools will be given together with the machine Machine is in good working condition

DAEWOO PUMA 8S cnc lathe the machine is of USA origin therefore 220 three-phase it was tested after unloading for 5 years, with a transformer that I no longer own, it was working, new spindle never installed

Daewoo Puma 15 2-axis lathe (700x1500) Self-centering is an autoblock dia. 500

Mazak Integrex 50 CNC Lathe Turning length : 2500 mm Turning diameter : 710 mm

Mazak Quick Turn Smart 200 Cnc Lathe Machine is in good working condition Maximum swing 660 mm Maximum machining diameter 350 mm

Schutte AF 42-8 Multispindle Lathe • 8 spindle mechanical lathe • CNC controlled and chip conveyor at stations 6 and 7 • Automatic shaft loading • It is in working condition

Samsung PL30L CNC Lathe Machine is in good working condition Turning diameter : 650 Turing length : 1050mm

CNC lathe Manufacturer: Mazak Model: QT Nexus 200-II M Year: 2008 CNC: Mazak Mazatrol Matrix Nexus

Samsung Smec PL 35 CNC Lathe Turning Dia : 419 mm Fanuc control Machine is in good working condition

Cincom L32 VII MCL2032/1633 automatic lathe. The current state of the machine - complete machine. It worked until it was turned off. It has a transfer and security sensor, so you will probably need to contact the manufacturer. Data: Full load current 29A Interrupt Capacity 2.5/2kA Input Voltage AC200V 3 50/60Hz Rated Power 10kVA Weight 2750 kg

Doosan Puma 400L CNC Lathe 15 inch chuck Machine has been purchased December 2013 Max Turning Dia: 560 mm

Accuway UT-300L CNC Lathe Maximum turning diameter : 500 mm Maximum turning length : 1200 mm

Controller: Siemens C200 Type of barfeeder: Index MBL Max. Power: 11.5 KW Min-max diameter: 1-42mm

Biglia brand CNC lathe mod. B501 year 1999, FANUC 18i-T control, 12 position turret and tailstock + ASMUT bar feeder mod. AB8/7/65. Accessories: Mario Pinto chuck dn.250 mm. with 22 sets of clamps, Bellegrandi plier holder with 13 pliers of various sizes, n°12 tool holders and various accessories For sale due to cessation of activity

Doosan Puma MX 2500 S cnc lathe 7 axis Tools are on machine Machine is in very good condition

DMG CTX 310 eco CNC Lathe with C axes Working hours: 50110-24500 Control Unit : SIEMENS Model 810D z ShopTurn Chip conveyor Live tools are included Hydraulic chuck All maintenance has been done DMG All documents are available

Maier MLK 125L Swiss type lathe Minimag bar feeder Machine is in very good condition

Hanwha XE26 Swiss Type Lathe Max diameter : 26 mm Number of axis : 5 Max. length : 250 mm Fanuc control unit Live tools are included Speed head 1 piece fixed tool 2 deep hole boring tool

Maier MLK 32 D Proline Swiss Type CNC Lathe Bar feeder is included Chip conveyor is included Machine is in good working condition

The machine is currently in production! Driven tool C-axis machine. It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12

Schütte SE25 Multispindle automatic lathe Make a request for more information

maximum turning diameter over the slide: 320 mm handle diameter: 315 mm spindle passage: 63 mm spindle speed range: 45-1400 rpm. main drive motor power: 22 KW machine dimensions (length x width x height): 2900x1800x1900 mm weight of the lathe: approx. 5000 kg

The Okuma Genos LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12

Year of manufacture 1999 regularly maintained the possibility of a tour. video available