slit used for sale

Qty. 1 Second-hand slitting line – still in operation Mfc.: BONAK Model: 1550-4-20 Built: 1990 Min-Max.Strip Width: 500 - 1.550 mm Min-Max Thickness: 0.5 - 4 mm Entry coils: 20 Tn ID: 450-650-800 mm OD: 2.000 mm Exit coils: 20 Tn ID: 508 mm OD: 2.000 mm Line speed: 0-100 mm/min Large number of knives, separators, etc.. Pass line: Right to Left Floor space required: 19 x 10.5 m

material-width : max 1.200 mm cores of mother roll 76+152 mm weight of un+rewind-roll 1.000 kg unwinder diameter max. 1.000 mm rewind diameter max 1.000 mm rewind-roll min. width: 150 mm one arm max. 219 mm / two arms up from 220 mm rewind shaft dia. 50 / 70 / 76 mm tension-unwinding : 100 kg tension-rewinding : 20 kg/each arm machine speed : 350 m/min

Technical specifications: Max. width 330mm Max. Rewinding speed 200m/min Max. Control speed 250m/min Max Roll weight unwinder 150kg Max. Roll weight rewinder 70kg Max. Diameter unwinder 700mm Max. Diameter rewinder 400mm Max. Paper tension 5-100N Diameter Shaft unwinder 76mm Diameter Shaft rewinder 76mm Configuration: Unwinder Guidline Splice table Stroboscope Settings module machine Controle area (AVT camera not included) Bufferzone Extra webguide Niprol modules Slitting module (razerknives) Web clamp Rewinder (Friction shaft)

Qty. 1 Second-hand slitting line - dismantled Manufacturer: Mariani (Italy) Built: 1988/89 Electrical and controller are of 2006 Status: dismantled and in storage Strip width: 1500 mm Thickness: 0,5 - 3 mm Coil weight: 25 ton Coil ID: 500 / 700 Coil OD: 700 / 1700 Slitting shear rollers diameter 220 mm Knives dia.: 355 mm Line speed: 80 m/min.

Qty. 1 Second-hand slitting line - dismantled Manufacturer: Guida (Italy) Built: 1990 Status: dismantled and in storage Strip width: 1500 mm Thickness: 1.0 - 8.0 mm Coil weight: 20 ton Coils ID: 500/600 plus steel spacers for bigger diameter Shear roller diameter: 220 mm Knife diameter: 355 mm Speed: 0/25/50 m/min

Unwinder Web guide rotary die cut Missing label detection to check Waste rewinder Slitting Speed: 120 m/min

Slitter rewinder Neolt Electro Trim 250; good condition; cleaned and tested; Working width 2500mm; .max. Cutting thickness 0.6mm; Cutting speed 2m/s. Roll cutter Neolt Electro Trim 250; good condition; cleaned and checked; working width 2500mm; max. thikness 0.6mm; spedd up to 2m/s.

2 x Franz Müller Cord slitting Machine with Brushing in Best condition. with Huge needle and spareparts .

Slitter /Unwinder Manufacturer: Proslit Model: DUO 1350 SL Year : 2007 Machine Number: 135 SL With Printvision/ apollo II AVT Precision Camera Complete with all available spares and manuals

Tenon cutting and slitting machine Olma ZVA Counterclockwise rotation Finger pressure pneum. Fence Baumann 3500 mm Available from the end of November 2023

Strip line cutting device, slitting line, longitudinal splitting line, splitting line -Longitudinal slitting line: Longitudinal slitting line from slats/blind production -Cutting width: adjustable via spindle, see photos -Drive motor: North 2.2 kW -Belt feed: electrically driven -Transport dimensions: 1160/840/H1750 mm -Total weight: 688 kg

A line for longitudinal cutting of sheets in coils Technical parameters of the longitudinal cutting line: - cutting thickness up to 1.5 mm - cutting width from 25-1300 mm - max coil weight 6 t - cutting speed 0-25 m/min - cutting capacity for 1200 mm x 1 mm approx. 10-12 tons / hour. - installed power 10 kW

Qty. 1 Second-hand slitting line – still on foundation! Mfc.: SUNDWIG Built: 1990 Materials: Cold rolled steel coil, Hot rolled steel coil, galvanised steel coil Strip width: 400 – 1,700 mm Thickness: 0.4 – 3.0 mm Coil weight: 32,000 kgs Tensile strength: max. 600 N/mm² Final strip width after slitting: 50 – 1,600 mm Coil ID (uncoiler): 508 / 610 mm Coil OD (uncoiler): 550 – 2,100 mm Coil ID (recoiler): 508 / 610 mm Coil OD (recoiler): max. 2,100 mm Hydraulic pressure: 120 bar Feeding speed at straightener: 15 m/min. Feeding speed: 30 m/min. Operation speeds: 30-150 m/min & 30-300 m/min.

Material width 250 – 1.510 mm Material thickness 0,6 - 3 mm Coil inner diameter 508 / 610 / 750 / 810 Coil max. Outer diameter 1.800 mm Coil max. weight 28 Tn Re 280 Mpa Rm 450 Mpa Length 280 – 6.000 mm Nr. of rolls 17 rolls Diameter of leveller rolls 69 mm Nr. of back up rolls 54 Diameter of back up rolls 130 mm Shear Flying shear Total installed power 150 Kw Line speed according to thickness Speed 40 m/min with thickness 0,6 mm Speed 40 m/min with thickness 3 mm includes: 1 Buffer coil car 2 Entry coil car 3 Double de-coiler with hold down arm and pneumatic brake 4 17 rolls leveller (diameter 69 mm) and backup rolls manually adjusted 5 Flying saw with scrap output car 6 Out conveyor 7 Stacker 8 Roller output tables 9 Electrical cabinets Revamping: Year 2008: Flying saw New stacker New electrics and automation New gearbox leveller Ye ...

The thickness of the cut sheet is 0.5-4.0mm Decoiler with a lifting capacity of 25T coil outer diameter 508-610mm inner diameter circle 2000mm Slitting unit Width of the cut strip min 10.30mm Circular knives for cutting thicknesses of 5mm, 10mm, 12mm, 20mm, 25mm, 30mm 10mm, 12mm, 20mm, 25mm, 30mm wide push spacers Brake Winder inner diameter 508mm lifting capacity up to 16t. inner diameter max.2000mm

Three lines hot-slitting T-shirt bag making machine, super high speed with fully automatic production.Special design servo-driven bag feeding is easy to operate.Equipped the multi auto alarms with automatic stop design for safety.Independent three lines temperature control.Equipped with multi auto tension control to maintain the stability of the film roll.High efficiency on production.Improved tension auto control to enhance the productivity.Special Rocking System design to avoid overlap of bags sealing lines from sticking.Film width (mm) Max. 1500 Bag Size (mm)  Width (mm) Max. 330 x 3Length (mm) Max. 700Max. Production Speed (cycles/min)  Max. 300

2014 Smag Label Inspection Machine – Slitter Rewinder 350 mm working width Slitting Rewinding Tube Scan digital Inspection Camera Web Guide Label Inspection with or without slitting Manufacturer: SMAG GRAPHIQUE Type: 825 Year of manufacturing: 2014 Web width: 350 mm Mechanical Speed: 120m/min Rewinding Spindles: 25 / 40 / 50 / 76 mm Machine is located in Western Europe Please contact PP Machinery Team for more information or an inspection

Nummerieriwelle - Numbering Slitting wave Heidelberg MO Year 1990 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Trunnion carriage from Panhans with clamping device for use on table milling machines Length of base plate approx. 1000mm Sliding distance approx. 710mm Eccentric clamps for fixing the workpieces Stop can be tilted The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Roll enlargement and slitting unit The equipment consists of: Walking conveyor Roll turner Unwinder trolley Unwinder Two-position scraper bender Correct-feed rollers Centering rollers No. 1 (RC 8 x 1600) Sheet straightening machine (5x230x1700) Roller conveyor with pressure roller Guillotine shears No. 1 (NNR 10-1700/2) Cleaning device Centering rollers No. 2 Complex for butt welding of strips L-1700-M-Sh Pulling rollers No. 1 Loop table No. 1 Centering rollers No. 3 Pulling rollers No. 2 Centering rollers No. 4 Disc shears Edge-crushing shears NKP 4-500 Roller conveyor idle Loop table No. 2 Separating device No. 1 Pulling rollers No. 3 Guillotine shears No. 2 Device for lane separation No. 2 Winding device Winder assembly Winder pinch roller Folding winder support Winder unloading device Unloading cart Column with rotary console

Perforation - Scoring - Slitting System Rollem Champion 990 with Eurofold Year 1994 - Serial-No. E1088/530 Perforation - Scoring - Slitting System Arbeitsbreite / Working width max 470mm Flachstapelanleger EUROFold / with Flatpile Feeder EUROFold Stufenlose Geschindigkeitsregelung / stepless speed regulation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Description: Working width: 125 - 1500 mm System consisting of, -Height-adjustable coil trolley -Decoiler type HYD DEC-5-1500 -Stretching / Feed through unit -Length cutting unit -Length measuring device -Cutting shears type BKR 1600-2-S -Positioning device -Punching unit with 20 punches -Profiling unit -Double mini press brake -Outfeed roller conveyors -Sheet vacuum lifter with stacking station plate cut-off length: 6,300 mm, strip width: 125 - 1500 mm, coil internal diameter: 500 mm, coil external diameter: 1,000 mm, coil weight: max 5000 kg, weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 50,000 x 3,000 x 3,000 mm

LINE FOR LOWER AND CROSS-CUTTING OF COILS (annual capacity 10 000 t): Sheet thickness: from 0.4 mm to 2.0 mm Sheet width: from 800 mm to 1580 mm Material: cold rolled and galvanized sheet metal Strength limit: max. 480 MPa (for max. thickness of 1.5 mm) Yield strength: max. 250 MPa (for max. thickness of 1.5 mm) Output material parameters - cut sheets Width tolerance up to: +/- 0.1 mm according to EN 10140 Length tolerance up to: +/- 0.3 mm according to EN 10140 Maximum number of longitudinal stripes: 6 (for max. thickness 1.5 mm) Maximum number of longitudinal sections: 5 (for max. thickness 1.5 mm) Minimum width of one strip: 180 mm Minimum length of boards: 200 mm Maximum length of the boards: 3500 mm +

<br>DECOIL DURCHMESSER: 1000 MM, AUFWICKLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DECOIL DIA.: 1000 MM, COILER DIA.: 800 MM, WIDTH: 1000 MM, GRAMMAGE: 180 GSM, Still in operation: No Available: IMMEDIATELY

CMC Cevenini E450 Automatic Roll Slitting machine Automatic Roll Parting Machine Age: 2012 Working width: 1700 mm Max. Roll diameter: 430 mm Core diameter: 25 – 76 mm Roll weight max.: 80 kg Cutting width: From 2 mm Cutting System: Single rotating circular knife PLC Siemens Control Panel with Touch screen Machine comes with various circular knives in different diameter Machine comes with various shafts from 25 – 76 mm core diameter Machine is cutting Adhesive foil rolls, Adhesive tape rolls, paper rolls, foam rolls or other rolls. It uses a rotating circular knife for cutting a roll in several pieces with smaller widths

Nobs Slitting Line Shaft diameter 80 mm Shaft length 500mm Thickness: 0.10 - 1.20 mm can cut 6mm width Cuts maximum width 450mm Knife: 100 pieces of German production SPACE RINGS: AVAILABLE RUBBERS: AVAILABLE + - TOLERANCE ADJUSTABLE MAKES PRECISION CUTTING LINE:FULL AUTOMATION

12″ x .125″ x 4000Lb Bliss Slitting Line Make: Bliss Material Width: .075” – 12” Material Thickness: .008” – .125” Weight Capacity: 4,000Lb Coil ID: 16” – 20” Coil OD: 72”

18″ x .070″ x 6,000Lb Morvay Slitting Line Material Width: 18″, Weight Capacity: 6,000Lb, Material Thickness: .008″-.070″, Coil ID: 20″, Direction: Left to Right. Mandrel Uncoiler with Disc Brake, Powered Mandrel Expansion, Powered Hold-Down Roll, Driven Entry Pinch Rolls, Slitting Head with Adjustable Arbors, Knives & Tooling, Recoiler with Hydraulic Push-Off, Powered Over-Arm Separator, 50HP Motor, Exit 2-Arm Turnstile

60″ x .135″ x 20,000Lb Cincinnati – Forte Loop Slitting Line Material Width: 12″ – 60″ , Thickness: .010″ – .135″, Weight: 20,000Lb, Coil ID: 16″ – 24″, Coil OD: 72″, Speed: 600 fpm, Direction: Left to Right. Entry Turnstile, Entry L-Type Coil Car, Mandrel Uncoiler with Hold-Down Roll, Powered Peeler, Driven Pinch Rolls, PVC Applicator, Entry Shear, Two Slitting Heads, Injection Design, 5″ & 7″ Arbor Diameter, 75HP DC Motor, Two (2) Hydraulic Scrap Winders, Pit Cross Over Table, Drag Board & Rotary Tension Stand, Recoiler with Over-Arm Separator & Push-Off, 150HP DC Motor, Exit L-Type Coil Car & Turnstile. Electrics, Hydraulics, Controls, Tooling, Spare Parts

60″ x .135″ x 40,000Lbs Yoder Slitting Line Material Width: 12″ – 60″ Material Thickness: .010″ – .135″ Weight Capacity: 40,000Lbs Coil ID: 20″-24″ Coil OD: 72″ Pull Through Design Entry Coil Car Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Slitting Head with Gear Box and AC Feed-Up Motor Single Scrap Winder Recoiler with Over-Arm Separator DC Motor Drive Exit Turnstile Electrics, Hydraulics, Controls

60″ x .625″ x 100,000Lb McKay Slitting Line Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

72″ x .187″ x 50000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Key data: 400

Reel system Sheet width : 100 – 400mm Inner dimension : min. Ø 470mm. – Ø 530mm. Dimensions : Ø 1400mm. Load : 4000kg. Rotary speed d/min : 14 Rotary Speed Controller Right & left rotation ----- Feed system - SERVO Sheet width : 70 – 400mm Sheet thickness : 0.2 – 3mm. Speed : 100m/min. Feed : Ø 80mm. ( 2pcs.)

Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) is perfect solution for longitudinal cutting of coil metal into strips. This line can work with very big coils up to 74,000 Lb weight and 0.25 inches maximum metal thickness. Line is strong enough to make cutting speed 200 – 600 fpm depends on metal thickness and width you work with Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Manufacturer: PRO ECO Material: CRS, HRS, HPP & O Material Width: 12″ – 72″ Material Thickness: .060″ – .250″ Coil Weight: 74,000Lb Coil ID: 20″ – 30″ / 20″ – 24″ Coil OD: 72″ Line Speed: 200 – 600 fpm Direction: L-R Three (3) Coil Storage Ramp Coil Car Powered Lift & Traverse Double Cone Uncoiler Sliding Base Dual Water Cooled Brake Feed-Up Motor Powered  ...

Merkle Slitter 500mm wide

SLITTER AND ROTARY DIE CUTTER FOR BLANK LABEL PRODUCTION SPECIFICATION: THE CUTTING SPEED: 80M/MIN MAX WEB WIDTH: 320MM MAX UNWINDING DIAMETER: Ф600MM MAX REWINDING DIAMETER: Ф600MM THE CUTTING LENGTH: 190-450MM OVERALL DIMENSION: 1600×1060×1500MM DETAILS: AUTO WEB GUIDE MAGNETIC DIE CUTTING DIGITAL COUNTER TENSION CONTROL FOR UNWIND AND REWIND

Slitting line Fimi 1500×2.5mm x15t (A3783) Manufacture FIMI ITALY Year 1990 Strip width Min. 200 mm Max. 1500 mm Strip thickness 0.3 – 2.5 mm Coil weight Max. 15 t Coil- Max. 1500 mm Speed Max. 80 m/min Working direction Right  Left The line consists of:  Decoiler Mandrel Cone-Ø 480 – 610 mm Drive / braking Hydraulic motor Lifting table Hydraulic  Coil opener / pinch roll unit Telescopic table Hydraulic No. of pinch rolls 2 Pinch roll-Ø 400 mm Driving motor 25 kw  Slitting head No. of heads 2 Shafts diameter 120 mm Main drive D.C. motor Driving power 92 kW  Scrap baller  Minimum scrap width 5 mm  Maximum number of slits 17 Slits up to 1.0 mm 5 Slits at 2.5 mm  Brakes Pneumatic Press up and dow  Re coiler Capacity 15 t Diameter 508 mm Driving power 120 kw  Term style 4 arms x 15 ton

GOEBEL U7 SLITTER-REWINDER, overhauled in 2010, working width 3.600 mm., materials min 20 max 95 gqm, for paper, board, tissue, core Ø on mother reel 76/152 mm., unwinder: max reel diam.1.450 mm, rewinder: max reel diam.1.200 mm., Slitting: minimum5 mm.on 76 mm core, average speed 1.000 m/min., web guiding unit, shear slitting system, very good conditions, (the yellow table before unwinder is no more avialnle), WORKING WIDTH: 3.600 mm. 141.73

72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Liney Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Driv ...

GUILLOTINE REEL SLITTER, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety conditions: 2-hands operation ...

Slitting line HJ Loop 1600mm x 9mm x 50,000Lb (A3790) for longitudinal cutting of coil metal into strips of required width up to 9mm metal thickness Year of Manufacture: 2002 Make: HJ ENG,KOREA Raw Material: HR Coil Tensile Strength: Max. 50Kg/mm2 Yield Strength: Max. 30Kg/mm2 Coil Thickness: Min. 1.2mm ~ Max. 9.5mmT Coil Width: Min. 400mm ~ Max. 1,650mm Coil Weight: Max. 25,000Kg Coil Inside Diameter: 508mm Coil Outside Diameter: Min. ∅1,000mm ~ Max. ∅2,000mm LINE DATA Line Speed: Max. 150/80m/min Threading Speed: Max. 20m/min Slitting System: Pull & Drive Cutting by DC Power Control Slitting Width: Min. 40mm ~ Max. 1,300mm Slitting Number: Max. 30Cuts x 29Strips Pass Line Height: 900mm Line Threading Direction: Left To Right Coil Car With Coil Skid Uncoiler Coil Peeler Coil Opener Three(3) Bending Roll No.1 Pinch Roll Crop Shear with Guide Table Si ...

Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and  ...

Spectrometer for scientific use QEPRO-CUSTOM#HC-1 Characteristics:  Dimensions: about 182mm x 110mm x 47mm, weight about 1,18Kg;  Hamamatsu detector S7031-1006 2D 1044 x 64 pixels;  Integration time: from 8ms to 60min;  Maximum quantum efficiency: 90% , quantum efficiency at 250nm: 65% ;  Signal-to-noise ratio: 1000:1;  HC-1 composite diffraction grating, suitable for the range 200-1100 nm; Slit width: 25µm;  Interchangeable slits (not included), available in 5, 10, 50, 100 and 200μm;  Resolution (FWHM): about 2.0 nm with 25μm slit;  Thermoelectric cooling;  Direct interface with PC via USB;  Standard SMA 905 fiber optic connector. 2. Interchangeable slits cod. SLIT-XX Available in sizes 5, 10, 25, 50, 100, 200 μm. 3. Operating software cod. OCEANVIEW Characteristics:  Includes the necessary drivers for spectrometer control; ...

Essilor SLE 60 slit lamp: -High quality slit lamp in excellent condition - Manufacturer: Essilor -Type: SLE 060 -Year of manufacture: 1999 Essilor AKE 500 Computer: - High quality keratometer in excellent condition - Manufacturer: Essilor -Type: AKL 001 / AKE 500 Refractive diopter meter: -Focus rangefinder focimeter Essilor LME 60 - Manufacturer: Essilor -Type: LME 60 Essilor diets hand grinder: - Manufacturer: Essilor FHG Heat Gun Frame Heater: - Manufacturer: Essilor -Type: FHG 001 N -Electrical data: 230 V, 51 Hz, 10 A UV tester: - Multifunctional anti-UV tester, matching lenses and for testing banknotes Essilor PD Meter - Manufacturer: Essilor -Digital CRP meter Motorized table -Adjustable height The devices are sold together! All devices are in good condition and can be tested and can be viewed on site.

ega Plus - LF 330 Internal machine number: Vega Internal C3 number: Variant 10 Printing process: UV flexographic printing Printing units: 1 Own Coating Unit: No Printing ink: UV - flexographic printing ink Drying: UV - drying Painting-partial: No Painting-full: Yes / Flexosleeve Varnishes: Gloss varnish, matt varnish, TTF varnish, luminescent varnish Laminating: No Material width paper and foil: min.: 150 mm / max.: 340 Print width: max. 310 Printing performance: only punching max. 200 m/min., printing max. 70 m/min. max. rolls Ø - down: 1000 mm / max. rolls Ø - up: 400 mm punching width: max. 320 mm Print feed: min. 80T = 254 mm Print feed: max. 136T = 431.8 Format punching: Rotary WGR 240 punching units: 2 Flat punching: No Punching sheet: Yes Punching cylinder: No Airshock cylinder: No Upper punch: Yes Lower punch: Yes Sheet cutting (crosswise) / leaf cutter: No ...

Machine: Gallus R250 Internal Machines No.: 567 Internal C3 No.: Variant 5 Printing Process: Letterpress Printing Units: 5c+Varnish Own Coating Unit: YES Printing Ink: UV Printing Inks Drying: UV Drying Painting-partial: YES / Flexo-Cliché Painting-full-f.: YES / Flexo-Cliché Varnishes: Gloss Varnish, Matt Varnish, TTF Varnish, Luminescent Varnish Lamination: NO Paper material width: min. 130mm / max. 270mm Print width: max.: 255mm Printing capacity: max. rolls Ø - From: 700mm / max. rolls Ø - On: 700mm Punching width: max. 255mm Pressure feed: min. 304.8mm (96T) Pressure feed: max. 596.9mm (188T) Format punching: Flat & rotary WGR 220 Punching units: 1x flat / 1x rotary Flat Stamping: YES Punching Plate: YES Punching Cylinder: YES Airshock Cylinder: YES Upper punching: YES Bottom punching: YES with pass. Umfg. to the Upper Punches Sheet Cutting (Cross) / Sheet C ...

LAMINATING SYSTEM POLYTYPE BB 2200 LAMINATION LINE Coating/- lamination equipment for solvent based resin system. On an existing film or composite material. Year: 2008 Condition: Excellent The different film thicknesses what can be used depending on the materials, see references: Plastic foils 25-250 microns Metal foils (copper, aluminium) 20-150 microns Total composite thickness max. 500 microns Machine data: Production speed 0 - 150m/min Production speed 840 - 2160mm Resin 1 - 40g/m2 Winding units (main winder-/ lamination winder-/tensilized film winder): For unwind of the base film there are two winders (main winder/ lamination winder). Winder performance: - Winding direction clockwise / anticlockwise - Brakes ystem for constant and regulated tension e.g. alu foil with max. 2000 kg roll weight - Roll system centerless for steel,plastic-, carton tubes with optimal  ...

· Rotary Die Cutting Machine with Magnetic Cylinder · Easily replaceable die · Automatic feeding with double sheet detection and automatic correction · Double magnetic cylinder with anti-splitting coating · Indicated for slit and semi-cutting in adhesives, labels, cardboard, etc. · High pile suction feeder · Touch screen · Machine with automatic stripping · Front registration TECHNICAL SPECIFICATIONS · Max sheet size: 480 X 740 mm · Min sheet size: 240 X 280 mm · Max final product size: 456 X 720 mm · Min final product size: 50 X 80 mm · Min distance (depends on the material): 5 - 8 mm · Max die size: 480 X 750 mm · Min die size: 160 X 100 mm · Die height: 1 mm · Die cutting accuracy: ± 0,1mm · Material thickness (die cutting): 0,2 - 0,5 mm · Material thickness (max creasing): 0,4 mm · Feeder stack height: 500 mm · Max speed (depends on t ...

Uraca PÜV 8/200 Safety valve, bypass valve, overflow valve (pneumatic and silicone-free) similar but no Hammelmann, Woma, Kamat Ab. Operating overpressure: 50-200 bar Mpf. Flow rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10.9 kg with MADER PEU-063-0010-I-P-M Built: 2012 (unused) VE water: Suitable for operation with demineralized water. Electro-pneumatic control: Takes over the switching command and the pressure adjustment of the valve. Slit seal: Serves the exact reproducibility of the response pressure. For more technical data, see data sheet. Keeps the operating pressure constant regardless of the nozzle assembly. Suitable for long-term overflow operation. Excellent dynamic behavior with rapid flow changes. Special features: Very high responsiveness, high response dynamics, cone can be used on two sides.