side channel used for sale

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Number of spindles: 6 St. Working width: 230 mm Working height: 150 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 6-24 m/min. LEADERMAC Type LMC 623 COMPACT Four-Sided Moulder -------------------------------------------- Sold on behalf of a client! Working width (min. – max.): 15 – 230 mm Working height (min. – max.): 10 – 150 mm Width and height are motorized/controlled 6 spindles, spindle diameter 40 mm, 6,000 rpm Spindle configuration -------------------------------------------- Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: top Spindle 5: top Spindle 6: bottom Technical specifications provided by the manufacturer – no guarantee! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 4 St. Working width: 230 mm Working height: 150 - 200 mm Length of the planing table: 2000 mm Feed motor: 4 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type MB7023 Maximum working width 230 mm Minimum working width 20 mm Maximum working thickness 180 mm Minimum working thickness 8 mm Shaft diameter 40 mm Feed speed 5–30 m/min. Spindle speed 6000 rpm. 7 spindles B-4kw, R-5,5kw, L-5.5kw, T -7.5kw, T-5.5kw R-5,5kw, B-5,5kw Side motors of grinding brushes 2.2/2.2 kW Top motor of grinding brushes 2.2 kW Total power 52.2 kW Air pressure 0.2–0.3 mpa Width of side sanding brushes 200mm Width of top sanding brushes 300mm Transport dimensions 3750x1600x1500mm Weight 4200 kg Price 36880 Eur (EXW Jonava, Lithania)

REX HOMS-410-K two-side high-performance planer and saw combination, year 2004. Exchangeable planer heads, centre-cut guide saw, lower and upper working shafts and special lower multi-blade circular saw. Maximum planing width 410 mm, planing height 280 mm, saw cutting height 90 mm, self-feeding workpieces from 900 mm. Electronic feed 8–48 m/min. Drives: 5.5, 15, 22 and 55 kW plus 7.5 kW feed. Machine dimensions approx. 4,500 x 1,700 x 2,215 mm; weight approx. 7,800 kg. 400 V, 50 Hz, three phase. Overhauled and serviced in 2024.

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. control: Powercom Weinig Powermat 500 (Window Version for window producers) 5 x PowerLock -------------------------------------------------------- The machine will be a partial renovated at our warehouse prior to delivery. The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated. Technical Summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4: CNC-controlled axial adjustment - Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment - Window package for glazing bead separation: pneumatic cycling for right and top spindles for bead separation Detailed Description: -- ...

Weinig Profimat 23 FN01 four-sided planer for dowel production Working width 120mm Number of spindles 3 Spindle layout: 7.5kw Down Top 11kw Down 7.5kw Pneumatic Material Clamps Feed speed adjustable 5-30m/min 3kw feed motor Machine dimensions 290x130x187cmH

Weinig Profimat 23 FN01 four-sided planer for dowel production Working width 120mm Number of spindles 3 Spindle layout: 7.5kw Down Top 11kw Down 7.5kw Pneumatic Material Clamps Feed speed adjustable 5-30m/min 3kw feed motor Machine dimensions 290x130x187cmH

Manufacturer: WEINIG (Michael Weinig AG) Model: Powermat 700 Machine type: Four-Sided Planing and Moulding Machine Year of manufacture: 2023 Machine No.: 10008719 Standard Technical Specifications: Working height: 10–160 mm Working width: 20–230 mm Spindle speed: 7,000 rpm (except straightening spindle) Feed speed: 5–40 m/min, frequency controlled Max. tool cutting circle on horizontal spindles: 200 mm (except 1st bottom spindle) Max. tool cutting circle on vertical spindles: 200 mm Standard motor power, vertical spindles: 7.5 kW Standard motor power, horizontal spindles: 7.5 kW Standard Equipment / Control: Comfort Set operating concept Memory Plus control Electronic digital read-outs Pressure shoe in front of top spindle, feeding from the tool Spindles started and stopped by frequency converters Electrical Data: Operating voltage: 3 × 400 V / 50 H ...

Consisting of, desks, sideboards, metal cabinet, mobile pedestals, conference tables, showcase, document shredder and much more. Auction-ID: A1-51529-138

With content best. Stamps, dies, grinding discs and much more. Auction-ID: A1-51529-32

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Feed motor: 4 kW Dimensions (L/W/H): 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer customer is still working on it, machine can be visited -------------------------------------- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm 3 units, table rollers ------------------------------- ------- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective, these could be reinstalled by an electrician. -------------------------------------- Additional technical data (former order confirmation) attached -------------------------------------- Price of the above- ...

Well working 3 side tipper with papers. Auction-ID: A3-46114-17129

Technical details Configuration: 5-spindle machine Spindle layout: - Bottom spindle (jointing) - Right spindle - Left spindle - Top spindle - Bottom spindle Working capacity: - Working width: 20–230 mm - Working height: 10–160 mm Feed system: - Feed speed: 5–40 m/min - Feed motor power: 5 kW - Electronic infinitely variable feed adjustment - Pneumatic lifting/lowering of feed roller before first spindle - Quick-change feed rollers - Serrated feed roller Electrical specifications: - Supply voltage: 400 V - Frequency: 50 Hz - IE3 Premium Efficiency motors Control system: - Memory Plus touchscreen control - Storage of axial and radial spindle positions - Electrically adjustable pressure elements - Guided machine setup Right spindle: - Motor power: 11 kW - Spindle diameter: 40 mm - Speed: 7000 rpm - Axial movement: 80 mm - Maximum profiling depth: 35 mm Left spindle:  ...

Side telescopic height chart for column scales, never used Condition: new, never used This telescopic height chart can be fitted to many SECA column scales. It allows convenient reading of the height at eye level, even for short people. Auction-ID: A1-51618-526

USED PETER WOLTERS MICROLINE AC700F DOUBLE-SIDED FINE GRINDING MACHINE Wheel diameter: 720 mm Ring width: 200 mm Max. workpiece thickness: 75 mm Max. workpiece diameter: 200 mm Auction-ID: A1-50950-90

SET OF 2 USED PETER WOLTERS AC500F DOUBLE-SIDED FINE GRINDING MACHINES Serial No.: 10719 Machine No. (plates): 280 and 281 Year: 1999 Power supply: 400 V – 50 Hz – 16 A Disc diameter: 440 mm Equipped with 1 Lubrication pump tank Auction-ID: A1-50950-91

Seca 224 – Side Telescopic Height Measuring Column Scale Manufacturer: Seca Model: 224 Auction-ID: A1-51618-291

Seca 224 – Side Telescopic Height Measuring Column Scale Manufacturer: Seca Model: 224 Auction-ID: A1-51618-289

Side telescopic height chart for column scales, never used Condition: new, never used This telescopic height chart can be fitted to many SECA column scales. It allows convenient reading of the height at eye level, even for short people. Auction-ID: A1-51618-527

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-40408-25

Equipped with pallet with accessories and spare parts. Auction-ID: A1-42990-278

Side telescopic height chart for column scales, never used Condition: new, never used This telescopic height chart can be fitted to many SECA column scales. It allows convenient reading of the height at eye level, even for short people. Auction-ID: A1-51618-528

Seca 224 – Side Telescopic Height Measuring Column Scale Manufacturer: Seca Model: 224 Auction-ID: A1-51618-292

Side telescopic height chart for column scales, never used Condition: new, never used This telescopic height chart can be fitted to many SECA column scales. It allows convenient reading of the height at eye level, even for short people. Auction-ID: A1-51618-525

Seca 224 – Side Telescopic Height Measuring Column Scale Manufacturer: Seca Model: 224 Auction-ID: A1-51618-290

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-40408-38

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-40408-27

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-40408-30

3x3 to 6x3 tarpaulins Some of Lambert's - not everything Lambert tent roof Auction-ID: A1-51628-88

A&D LPRS 24 3-axle curtainsider semi-trailer – 2017 – air suspension – disc brakes Specifications: Brand: A&D Type: LPRS24 Model/Version: LPRS 24 – Mercedes-Benz Disc Year of construction: 2017 Date of first registration: 26-10-2017 VIN/chassis number: WSJPRS327HTC20308 Vehicle category: O4 Maximum technically permissible mass: 41,000 kg Mass in running order: 6,500 kg Number of axles: 3 Axle brand: Mercedes-Benz Maximum axle load: 9,000 kg per axle Tyre Size: 385/65 R22.5 Interior dimensions (L × W × H): approx. 13.62 × 2.49 × 2.70 m Stock number: 009108 Features: Air suspension Disc brakes Knorr-Bremse TEBS G2.2 / EBS brake system WISADECK floor Grey sliding tarpaulin Double rear doors Black Bull HD200TK-A outriggers Particularities: Tyre profile axle 1: left/right approx. 8/8 mm Tyre profile axle 2: left/right approx. 14/14 mm Tyre pr ...

as good as new, hardly any signs of wear, fully functional and complete Auction-ID: A1-51816-28

Equipped with 2 separately opening side doors and end door lock case unused Auction-ID: A1-47452-1148

Equipped with 4 separately opening side doors and end door lock case maximum payload 24 Ton unused Auction-ID: A1-47369-1145

Number of spindles: 9 St. Working width: 230 mm Working height: 120 mm Weinig Unimat 23, 8 spindles + Uni-spindle -------------------------------------------- Width and height controlled Includes Haberkorn workpiece return system The machine is still in operation and can be viewed at short notice! Spindle arrangement -------------------------------------------- Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: right Spindle 5: left Spindle 6: top Spindle 7: bottom Spindle 8: top Spindle 9: universal -------------------------------------------- Maximum feed rate: Hour meter: 8,848 h Spindle diameter: 40 mm Motor power ratings for individual spindles Overall dimensions: length x width x height including control cabinet: 7.2 m x 1.7 m x 2 m Planing table length: 2.2 m Planing heads included Tool wrenches included Driven table rollers: 6 pcs. Circuit diagram and operating instruc ...

GMC 3500 SL V8 5.7 pick-up / 3-sided dump truck – LPG – 1995 – automatic GMC 3500 commercial vehicle/pick-up from 1995, equipped with a 5.7 litre V8 engine, automatic transmission and Scattolini Bison 3-sided tipping body. Specifications: Brand: GMC Type: 3500 SL Year of construction: 1995 VIN/chassis number: 1GDHC34K7SE522701 Vehicle category: N2 Engine: 5.7 liter V8 Displacement: approx. 5,700 cc Power: 157 kW Transmission: automatic Fuel installation: LPG LPG tank: approx. 12 litres Odometer reading: Approx. 80,711 miles GVWR according to type plate: 4,536 kg Maximum axle load front: 1,760 kg Maximum rear axle load: 3,402 kg Tyre size according to type plate: LT225/75 R16 Features: Scattolini Bison superstructure Hydraulic 3-sided tipping bucket Aluminium side and rear panels Rear axle with double wheels Towbar Cab with bench seat Particulari ...

1x planing set; 1x profiling set; Axle hole ø40mm; suitable for lot 1; with various accessories. Auction-ID: A1-51016-27

3-piece set for milling turn/tilt frame; retracting; Axle hole ø40mm; suitable for lot 1 Auction-ID: A1-51016-22

For milling thresholds; skirting boards; gutter mouldings; Axle hole ø40mm; suitable for lot 1 Auction-ID: A1-51016-26

Equipped with quick-change blades; extra set of Tersa heads; automatic height / width adjustment; pneumatic extraction valve; Exhaust air duct to be dismantled by copper up to the first shut-off valve. Auction-ID: A1-51016-1

For milling fire-resistant rebate windows and doors; rebate depth 25mm; Axle hole ø40mm; suitable for lot 1 Auction-ID: A1-51016-25

2-piece set for milling outward-turning rebate; Axle hole ø40mm; suitable for lot 1 Auction-ID: A1-51016-23

For milling rebate windows and doors; rebate depth 17mm; Axle hole ø40mm; suitable for lot 1 Auction-ID: A1-51016-24

This lot is located on the first floor accessible via a staircase. There is no elevator. Auction-ID: A1-51166-70

This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not guarantee the operational safety ; The mileage, operating hours and other data given are to be understood as non-binding guideline values. No guarantee is given for the accuracy of the information ; No loading assistance for this lot; Please note: If there is no suitable transport vehicle available at the time of collection, and cannot be loaded, additional costs may apply for a subsequent collection date; Auction-ID: A1-51582-40

Operation is unknown, it probably needs to be restored. Auction-ID: A3-46118-5833

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Battery of 2023 Viewing by appointment! Auction-ID: A1-40340-120