shrink 51 used for sale

Available in stock 4 x Used Capstone Gas Fuel Manifolds. Most commonly used for Microturbines C30. All of the manifolds are complete with premix solenoid (P/N 507033-001). The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 510mm -Width: 310mm -Height: 65mm -Plate thickness: 27 mm -Weight: 37.7 kg

Available in stock 1 x Used Capstone Pre-charge LCM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone BCT Inductor Module. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Lns Sprint S2 barfeed - Fanuc 18-T Control

Available in stock 1 x Used Capstone BCT Inductor Module. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone FB RFC Heat Exchanger. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

machine has transport damage, 7.5 hp, Tilt adjustment possible

Quality unchecked. Please note! Pick-up is only possible by appointment! Chuck: 530mm

Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W

Available in stock 1 x Used Capstone Digital Power Controller (DPC Board). The unit is complete. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Please note! Needs to be checked

Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W

Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W

Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W

Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W

Quality unchecked. Positions on exchanger: 30

Radius profile scraper IMA Type: 08.515

Controls: Siemens S5, length: 7100mm, width: 2600mm, height: 2500mm, weight: 10.6t, with Bar Loader Iemca PRA 40/42/F, documentation, control cabinet, hydraulics, with bar guide and chip and coolant disposal was maintained regularly.

3 pcs. Pfeiffer Balzers TPU 170 (turbomolecular pump) 3 pcs. Pfeiffer Balzers TCP 120 (controller for TPU 170) 3 pcs. cable for TPU 170 1 pcs. Alcatel Type 5150 (turbomolecular pump) 1 Alcatel CFF 100 (controller for type 5150) 1 Alcatel 5030 CP (turbomolecular pump) Price plus 19% VAT Not tested for functionality. Please see photos for technical data. Can also be picked up.

Steuerung: HEIDENHAIN TNC 150.

Max. bending diameter: 30mm, an inspection is possible.

X-travel: 3665mm, y-travel: 1250mm, z-travel: 200mm, max. plate thickness: 120mm, weight: 4t.

Including spare parts, without accessories, was maintained regularly.

Wrap around BAUMER mod. FLEX 515 Year 2004 Speed 30 cartons/minute Operator panels with touch-screen PLC Siemens S7 Gluer PREO Safety Protections CE System put hive

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy

Number of printing works: 2, format: 100-520x150-365mm, paper thickness: 0.04-0,4mm, printing area: 505x350mm, printing speed: 3000-1000sheets/h, plate size: 510x400mm, plate thickness: 0.3mm, length: 2215mm, width: 1540mm, height: 1598mm, weight: 2t, number of prints: 2.5 Mio.

Sheet dimensions: 100-520x150-365mm, printing area: 505x350mm, connected load: 3kW, weight: 2.2t.

Working width: 520mm, number of punching stations: 2, unwinding diameter: 76mm, with documentation, unwinding, splicing table, side edge control, grid take-off and matrix rewinding/grid rewinding, label converter/label shifter for 110x75mm format, slitting station with four shear blades, two separate rewinding axes, magnetic cylinder 134Z and magnetic cylinder 161Z, on-site inspection is possible.

High-speed milling spindle HENNINGER Type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Stem dimension 110 mm (machine spindle to tension nut Tool holder MK4 with tightening thread M16 Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12,5 / 13 / 14 mm Net weight 6,5 kg good condition; used

There are two identical electric forklifts available, connected load: 7.6kW, weight: 8.17t, operating hours of machine 1: 24,063h, on-site inspection is possible.

TOP CONDITION - OVERHAULED IN 2022 ! - 1 year warranty Year of construction: 2007 Panel format: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick puncture incl. ball roller table incl. 4-fold head change magazine incl. 2 cutting heads incl. 10-fold automatic nozzle changer FE: up to 24mm VA: up to 15mm oxide-free designed for high-pressure cutting up to 20bar no foundation needed ! Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training Always regularly serviced

Shredder mill with blades brand: Trit, Model: TRIT-510, motor: 10 hp, new, cutting chamber: 330 x 250mm, with electrical panel.

teach-in touch Siemens control Swing over bed: 515 mm Swing over cross-slide: 328 mm Distance centre tot centre: 1500 mm Dia of spindle bore: 108 mm (option ) Power on the spindle: 10 HP Number of speeds: 16 > 1500 rpm (option ) Command: Siemens Weight: 2270 kg

heavy duty lathe with 3 guides with conical ruler rapid movement of cross-slide one steady of 710 mm one steady of 420 mm 4 claw chuck dia 420 mm Distance between centers: 5100 mm Swing over bed: 1200 mm Swing over cross-slide: 880 mm Swing in gap: 1650 mm (400 mm long) Diametre of main spindle bore: 130 mm Number of speeds: 7 > 700 rpm Digital screen: Fagor 1 axis Weight: 13 ton Steady(s) (fixed): 2 steadies

max. format 36.50 x 52 cm Year of construction: 1998 Shed feeder Ryobi Filmfechtwerk SuperDampener Cooling unit MGE ECO Plate quick-release rails Dry pollinators Delivery date: immediately Price on request. We deliver and install worldwide!

Speed control unit GAC-ESD5131 1 piece(s) available, with original packaging

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS., Mimu machine tools Italy, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 250, Wheel diameter: 510, C ...

Stock Number: 3782 CNC LATHE Manufacturer: MIYANO, Type: BNE-51S Machine NO.: 98BX510077, Year of manufacture: 1998 Specifications: Max. swing diameter 51 mm dia. Main engine power 11/7.5 kw Main spindle speed range 4000 rpm Bore through drawing tube 51 mm dia. X axis movement 150 mm X2 Ash Movement 115 mm Z ash movement 380 mm Z 2 axis movement 125 mm Tool turret 1 with 12 stations Powered stations turret 1 6 pieces. Tool turret 2 with 10 stations Powered stations turret 2 5 pieces Counter spindle Motor power counter spindle 5.5/3.7 Kw Max. collet subspindle 41 mm/dia Control FANUC 18T Fabr. Accessories: Charger Kama B4265 fabr. Length: 2600 mm + magazines, height: 1950 mm, width: 2560 mm, weight: 6300 kg

Working width: 510 mm; Planing shaft: tersa; Number of knives: 4; dressing table length: 2800 mm; Dressing table adjustment: lever; Display Spahnabnahme: Scala; Hollow and pointed joint display: -; Dressing stop angle adjustable: yes; Engine power: 7 kW; Machine length: 2800 mm; Machine width: 1000mm; Weight: 800 kg;

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

Cast iron clamping cube Length: 1290 mm Width: 920 mm Height: 510 mm T-slots dimensions: 42 x 25 mm 2 faces slotted Weight: approx 1 T

cutting diameter: 330 mm saw band length: 4640 mm cutting width: 510 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: round: 330 mm capacity 90 degrees: square: 320 mm capacity 45 degrees: flat: li. 350 x 320 / re. 380 x mm capacity 45 degrees: round: li. 320 / re. 320 mm capacity 45 degrees: square: li. 320 / re. 320 mm capacity 60 degrees: flat: li. 230 x 310 / re. 250 x mm capacity 60 degrees: round: li. 200 / re. 200 mm capacity 60 degrees: square: li. 200 / re. 200 mm weight of the machine ca.: 1,19 t total power requirement: 4,0 kW Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice clo ...

1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m

MAZAK HYPER GEAR 510 laser cutting machine manufactured in Japan in 2006, guarantees its user the highest quality laser cutting of workpieces with a maximum weight of 930 kg. The CO2 laser HYPERGEAR 510 has an indestructible construction made of the highest quality raw materials with a large working table, which ensures excellent rigidity and stability during machining. The laser cutting machine is equipped with a reliable PANASONIC YB-L400A8M5E laser source, which generates a 4 kW laser beam, as well as a large control panel with installed MAZATROL Preview CNC controller for controlling all machine functions. The MAZAK laser weighs 14800 kg. Technical data of the laser cutting machine MAZAK HYPER GEAR 510 - laser power: 4 kW - work table dimensions (L x W): 3000 x 1500 mm - feeds in X/Y/Z axis: 3070/1545/100 mm - maximum sheet metal weight: 930 kg - maximum sheet metal dimension ...

Jessey Jaguar 2080 Ø 510 x 2000 mm CNC Swing over bed: 510 mm Swing over cross-slide: 340 mm Distance centre tot centre: 2000 mm Spindle cone: A2-8 Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 12 > 1800 rpm Command: Fagor Length: 4060 mm Width: 1420 mm Height: 1600 mm Weight: 4 ton

12 stations main turret(6 are driven) - 6 stations sub turret - LNS sprint 552 barfeed new in 2010 - Fanuc 21TB Control.