sheet rolling machine used for sale

Dough Sheeter -NEW- - Model: TA520 - Z - Table model - Band width: 520 mm - With plastic tapes - Condition: New - Warranty: 12 months

Much sheet saw with Electr. Width adjustment from 1 sheet Chain width 250 mm unit 220 mm cutting height of 150 mm 15 kw motor

Dough Sheeter -NEW- - Make: RONDO - Model: SSO-Z 630 - Band width: 633 mm - Roll length: 660 mm - Rollers opening: 3-45 mm - Condition: New - Warranty: 12 month

Capacity: 50 mm x 15.0 mm in manor, drive: by hand, with substructure, 150 kg; good, ready to use

(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes per 1 min: 20 Single slide strokes per 1 min: 16 Shut height: 1060 mm Slide adjustment: 320 mm Table dimensions: 3150x1800 mm Slide dim., front-back: 1700 mm Window H 1500 x W 1900 mm Hydro pneumatic cushion in table clamping force at P = 0.42 MPa (P = 4.2 kg / cm2), kN 2000 ejection force P = 0.45 MPa (P = 4.5 kg / cm2), kN 200 Main-drive electric motor power: 132 kW DIMENSIONS: 5150x4700x11400 H floor7830 mm WEIGHT:193 ton

Key data: 40

Shearing capacity: 40 mm Nibbling capacity: 0 mm Punching capacity: 0 t Make: GEKA Type: Hydracrop 80 SD YOP: 2010 Large package tooling 5 Working stations 2 Foot switches Stroke adjustable:     70mm Punching force:        80T Capacity Ø x thickness:40 x 20 mm Cutting force:         150T Throat:                500mm Capacity L profile:    130 x 130 x 13 mm Power:                 9kW Length:                2.200 mm  Width:                 1.200 mm  Height:                2.200 mm  Weight:                2.800 kg

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

Capacity, ton 630 Ram stroke, mm 300 Ram adjustment, mm 220 Number of strokes per minute 15 Table dimensions, mm 1100 x 1500 Slider dimensions, mm 1000 x 1250 Distance between table and slider in its lower and upper adjustment position, mm 650 Ram ejector stroke, mm 100 Capacity of hydro cushion, ton 55 Stroke of hydro cushion, mm 150 Main motor power, kW 55 Press weight, kg 63000

The force of 500 tons. stroke 305 mm. Adjust slide bar 254 mm. Distance between table and slide 485 mm. Distance between columns 3050 mm. Table size 2740 x 1370 mm. Pusher in table 155 mm. Maximum press height above floor level 6900 mm. Power 37 kW. Number of RAM strokes 12 strokes/min. Weight 93 tons.

Capacity: 250 ton Slider stroke: 400 mm Number of strokes per minute: 25 Table dimensions: 2500x1250 mm Slider dimensions: 2500x1250 mm Distance adjustment between table and slider: 250 mm Distance between table and slider in its lower and upper adjustment position: 800 mm Clamping plate thickness: 100 mm Hydro-cushion: -Force: 46 ton -Stroke: 160 mm Weight: 70 ton

New FRITSCH roll-out machine; Type: Rollfix 300 CM/650 -NEW- Dough roll-out and cutting machine - autom. Flour spreaders - Manual and foot shift - infinitely adjustable speed - left table with cutting plate and plastic strap - right table with plastic strap - incl. triangle cutting knife 160 x 180 mm - incl. cross cutting roller 120 mm - incl. longitudinal cutting roller 120/700 - Original price of the machine: EUR 24.306,- Specifications: left table 1,400 mm right table 1,600 mm Width 650 mm Roller opening 0.1 - 45 mm Roll diameter 88 mm Throughput height protective grille 85 mm Discharge belt 40 m / min. or 67 cm / sec. Cutting speed 2 - 7 m / min. El. Connection 400 V, 50 Hz, 1.1 kW Overall dimensions 3,700 x 1,270 x 1,300 mm Weight 416 kg The reason for the sale of the machine is a bakery takeover. The machine is in very good condition and has neve ...

Qty. 1 Second-hand automatic sheets (pallets) storage system Mfc.: MATTER S.R.L Built: 2002 Model: Mat 00.6 Number of Automatic Retrieval Cars: 2 Number of drawers: 756 Pallets Dimension of Pallets: Width: 1000/1500 mm / Length: 2000/4000 mm / Height: 250 mm Max. Pallet Weight: Max: 3000 kg Maximum speed of Retrieval Cars: Y Axis: 11 m/min . / X Axis: 58 m/min. / Z Axis: 20 m/min. System is working with Picking Station for separating and handling of pallets Dimensions of the system: Length: 74 meters x Width: 9.40 Meters (not including the picking station) X Height: 9.6 meters ( 9 rows )

Effort 500t Slide stroke 500mm Number of strokes per minute 20 Slider dimensions 3840 x 2290 x 2360mm Slider weight 17 300kg Adjustment of the distance between the slider and the table 500mm Max. open press height 1300mm Max. open die height 1280mm Min. Closed height of press 800mm Min. closed die height 820mm Height of sliding table 500mm The maximum force of 3 pillows of pressing 100t Cushion plate stroke 200mm Main motor power 75 kW Number of sliding tables (sideways movement) 1 Number of additional drawers 1 Press weight 136,700kg

moving bolster Capacity, ton 500 Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000

Capacity 500 tons Speed 20 spm Bed area 2800 x 1800mm Ram area 2800 x 1700mm Stroke 500mm Die height 1100mm SDAU weight 130 tons

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Notching machine make COMACA type N 225 EPAS 4Machine -No: 2612Technical specifications:Knife length 225 mmMax. Sheet metal thickness 42 kg, strength 4.0 mmMax. Sheet thickness 70 kg / VA 3.0 mmfixed cutting angle 90 °Projection 110 mmStrokes per minute 45Cutting capacity 10 tTable size 1050 x 800 mmDrive power 4.0 PSWeight approx. 700 kgWith- inner depth stop- foot switch- 2 adjustable angle stops- without pneumatic automatic stopused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic fixed angle notching machine make KNUTH type KKM 250.6Machine -No: 124780 built in 2002Technical specifications:max.sheet thickness at 45 kg: 6.0 mmCutting length: 250 mmCutting angle: 90 degreesStrokes per minute: 50Table size: 810 x 750 mmHydraulic oil tank: 40 lDrive power: 4.0 kWExternal dimensions approx .: 900 x 900 x 1150 mmWeight approx: 856 kgWith- foot switch- 2 adjustable angle lengthsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data:1 notching tool for presses External dimensions: 345 x 345 x 210 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 550, ------------------------------1 notching tool for presses External dimensions: 250 x 350 x 260 mm used, in good condition: EUR 350, -----------------------------1 notching tool for presses External dimensions: 345 x 345 x 220 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 520, ----------------------------1 notching tool for presses External dimensions: 345 x 345 x 325 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 410, -For drawing see documentsPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are a ...

Hydraulic notching machine make INDUMASCH type FA 250/6Year of construction 1995Technical specifications:fixed cutting head:90°Blade length: 250mmCutting capacity mild steel: 250 x 250 x 6.0 mmCutting capacity stainless steel: 250 x 250 x 4.0 mmTable dimensions approx.: 1000 x 790 mmMain Voltage: 380V 50HzDrive power: 3.0 kWApprox. weight: 810 kgDimensions approx.: 1000 x 1200 x 1250 mmwith- Electrical stroke adjustment with digital display- Inside stop- foot switch- automatic cutting gap adjustmentused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

We offer you here a dough Sheeter. Producer: Salem Rondo Type: Combi 613 Dimensions of the straps: - width: 60 cm if interested and for more information we are available.

Mobile strech bander suitable for grouping + banding of folding boxes asn. Output: up to 40 bundles / min. PLC: Siemens S5.

Producer W&H Type GF 1005 Web width 800 mm. Cut-off length 650 mm. Material 18 – 200 gsm. Speed 220 cut/min. It has 4 unwind shafts, two of them can take reels of 1000 mm. dia. The machine has been making wrapping sheets for the food industry.

Pastries line Fritsch Euroline P 235 Basic model version I Bandwidth 615 mm with dough coil holder Cutting station with cutting rollers with roller tray Dough collecting container Wrapping roller easy Dough scraper with guillotine with cutting length adjustment Stainless steel version 6000 mm long Connection 400V, 16A-CEE plug Machine

Meurer Machine type: CM/HBB40-T80 Built :2000 V:400/230 Kw:19

CNC swivel bending machine make FASTI type 2095-12-3Machine -No: 85295040 built in 1985Technical specifications:Usable length: 1270 mmmax.sheet thickness: 3.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmDrive power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1480 kgExternal dimensions: 2500 x 3600 x 1700 mmWith- CNC stop table 2500 mm- foot switch- Two-handed disengagement- CNC screen control with floppy disk driveSPECIAL PRICE as a spare part dispenser or for reconstructionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized folding machine make LOTZE type HZK 25 2500/3Machine -No: 1827 built in 1956Max. Working length: 2540 mmMax. Sheet thickness: 3.0 mmmin. Inner bending radius: 4.0 mmMax. Opening width of the upper beam: 300 mmOpening width of the bending beam: 40 mmWorking height: 800 mmDrive power: 3.5 / 2.2 kWDimensions: 4200 x 1400 x 1600 mmWeight approx: 3.75 tWith- gear lever gearbox for opening and closing,xa0xa0xa0 Bending and returnused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized folding machine make KRAMER type AMaut IIYear of construction 1985Effective length: 1020 mmMax. Sheet thickness: 3 mmMax. Opening width of the upper beam: 290 mmMax. Adjustment speed of the lower and bending beam: 90 mmMotor power bending beam: 2.2 kWEngine power upper beam: 1.5 hpDimensions L x W x H: 1600 x 700 x 1500 mmWeight approx: 1300 kgWith:- backgauge- Footswitch- separate control panel- one-sided bending cheek driveused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized folding machine make KRAMER type AMaut IIMasch. -No: . 45858, year of construction 1985Working length: 2025 mmMax. Sheet thickness: 2.25 mmMmin. Turning width: 5 X sMin. Inner radius: 1.5 - 2 X sAdjustment of the lower and bending cheek: 90 mmfor round bends: 90 mmhighest working position of the upper beam: 190 mmmax. Opening width of the upper beam: 290 mmDrive power: 3.0 / 1.1 kWDuration of a workflow: 7.0 sec.Weight approx: 2450 kgExternal dimensions approx: 3000x1000x1650 mmWith:- Control panel on the right side of the machine- Easy bending angle adjustment on the control panel- optional switching to automatic, semi-automatic or inching mode- Potentiometer for the degree adjustment- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted ...

Motorized swivel bending machine make FASTI type 2095/10/4Machine -No: 91295055 built in 1991Technical specifications:Usable length: 1020 mmmax.sheet thickness: 4.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmMotor power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1420 kgExternal dimensions approx .: 2113 x 900 x 1500 mmWith- foot switch- Operating modes: individual switching for each work step Automatic operation for a complete work cycle- Bending angle adjustment via digital display- Tear stopATTENTION: The bending beam is torn in 2 external places: and professionally welded.usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wald ...

Universal motorized folding machine make STÜCKMANN + HILLEN type AWR / M 2000/2Machine -No: M 05769061, year of construction 1976Working width: 2050 mmMax. Sheet thickness: 2.0 mmlargest passage: 3100 mmOpening width of the upper beam: 250 mmOpening width of the lower beam: 105 mmOpening width of the bending beam: 105 mmlargest opening width: 200 mmDrive power: 0.75 / 3.0 kWWeight: 2850 kgExternal dimensions: 3900x1000 x 1700 mmWith- driven upper, lower and bending cheek- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized swivel bending machine make HERA type UM III 2500 x 5 mmMachine -No: 2013Technical specifications:Working width 2500 mmMax. Sheet thickness 3.0 mmSmallest shelf height with the greatest sheet thickness 16 mmsmallest inner bending radius with the greatest sheet thickness 4.5 mmMax. Opening width of the upper beam 350 mmMax. Adjustability of the lower andFolding beam 125 mmlargest diameter when rounding 250 mmWeight approx 3100 kgMotor power 5.5 HPWith- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic swivel bending machine make JORNS Norma-Line-125-SH-OP / 2-8Machine -No: 9778-01 built in 1997Technical specifications:Bending length: 8000 mmInsertion depth: 1000 mmmax.sheet thickness steel: 1.25 mmmax.sheet thickness aluminum: 2 mmmax.sheet thickness VA: 0.80 mmmax.operating pressure: 140 barStroke of the upper beam: 200 mmNumber of bending cylinders: 4Drive power: 4.0 kWDimensions: 8500 x 1300 x 1800 mmWeight approx: 4.9 twith- OP 2100 axis control (9 memory locations)- Guide rail with roller shears- 2-pedal foot control- Emergency stop raillittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sugden Stainless twin lane sheeter, stainless mesh belt, belt width 400mm, width of stainless rollers 400mm, mobile frame, 3Ph

3-fold combined hydr. Sheet metal working machineHydraulic folding machine - press brake - guillotine shearsMake GRIEBEL type SAS 75-30-4 built in 1981Technical specifications:PRESS BRAKE PERFORMANCEWorking pressure: 75 tWorking length: 3050 mmProjection: 120 mmStroke: 270 mmForward speed: 37 mm / sec.Working speed: 0 - 30 mm / sec.Return speed: 45 mm / sec.Number of angle programs: 6PERFORMANCE BENDING MACHINELength: 3050 mmSheet thickness: 3.0 mmProjection: 400 mmStroke of the upper beam: 290 mmForward speed of the upper beam: 37 mm / sec.Return speed of the upper beam: 42 mm / sec.Working speed of the bending beam: 45 ° / sec.Number of bending programs: 6PERFORMANCE TABLE SHEARSCutting length: 3050 mmmax.sheet thickness: 4.0 mmCutting angle: 1 ° 20´Knife strokes: 10 - 15 H / min.Number of hold-down devices: 20Pressure of the hold-down device: 250 kpProjection: 270 mmGENERAL DATA:El ...

Motorized swivel bending machine make FASTI type 212 30/4Year of construction 1980Technical specifications:max.working length: 3040 mmmax.sheet thickness: 4.0 mmOpening width of the upper beam: 350 mmAdjustability of the bending and lower beam: 80 mmBending angle preselection: 0 - 180 °:Drive power upper beam: 4.0 kWDrive power bending beam: 7.5 kWWeight approx: 6500 kgExternal dimensions approx. (Without back gauge): 4500 x 1200 x 1800 mmWith- FASTIMATIK electronic control- 2-way goat tool- additional bending railsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual bending machine make REINHART München type UBM IIMachine -No: 127Bend length: 500 mmBending capacity at 37 kg strength: 1.0 mmBending capacity at bending length 300 mm: 1.5 mmBending capacity at bending length 200 mm: 2.0 mmOpening width of the upper beam: 20 mmDepth of the back stop: 300 mmOutside dimensions approx: 900 x 600 x 280 mmWeight approx: 150 kgWith- many different additional tools- manual backgaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual swivel bending machine make HERA type U IIIYear of construction 1974Technical specifications:Bending length: 1540 mmgreatest sheet thickness at 40 kg: 4.0 mmSmallest shelf height with the greatest sheet thickness: 20 mmOpening width of the upper beam: 350 mmAdjustability of the lower and bending beam: 125 mmlargest diameter when rounding: 250 mmExternal dimensions approx .: 2500 x 1000 x 2000 mmWeight approx: 1000 kgWith- counterweight- Hand wheel for height adjustment of the upper beamused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual swing bending machine Fabr. Schechtl type UKV 2002 x 1 Masch. -No: 6412 Year of construction 1995 with segmented bending tools Technical specifications Working width 2000 mm Max. Tin thickness steel 1.0 mm Max. Sheet metal thickness ALU 1.5 mm Max. Tin thickness Va 0.70 mm Opening width of the upper wang approx. 100 mm Outer dimensions L x B x H 2600 x 800 x 1200 mm Weight approx. 625 kg with - split tools up and down - Weight equalization for top and bending cheek - Foot pedal for close the top cheek - Scale for bending angle left and right - Manual background Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC-controlled hydr. Sheet metal shearing machine make WEINBRENNER type TSV 6/3050Machine -No: 687 T built in 1987gr. Working width: 3050 mmFor sheets with 45 kg strength up to: 6.0 mmclear column width: 3160 mmclear stator projection: 200 mmCutting angle min./max .: 1/2 °Backgauge adjustment: 1000 mmNumber of hydr. Hold down: 12Number of strokes min./max. (depending on cutting length and material thickness): 22/36 / minHydraulic drive: 380 V, 15 kWTable height above hall: 900 mmDimensions incl. Backgauge, without frontSupport arms: 4100 x 2300 x 2100 mmWeight approx .: 8500 kgWith- Control in swivel control panel CYBELEC CNC 1000- compl. elec. Device with control device in the large switchingxa0Cabinet attached to the side of the machine- Backgauge control with programming- Material quality code- Sheet thickness preselection- stroke length adjustment- Contact cutting device- Scrapweed- ...

Hydr. CNC-Sheet metal Shear make GWF MENGELE type S 8 - 1500Machine -No: S2544, built in 1989Max. Cutting length: 1550 mmMax. Sheet thickness: 8 mmlateral. Discharge i. Stand: 50 mmSheet metal passage: 16 mmCutting angle adjustable: 2 ° 30 - 0,5 °Empty strokes: 25 - 32Number of hold-downs: 8Cutting pressure: 280 barHold-down pressure: 80 barOil filling: 300 lDrive power: 18.5 kWTotal connected load: 20.1 kWExternal dimensions: 2130 x 3260 x 2360 mmWeight: 5.8 tWith- CNC control SIEMENS S 5 for numerical sheet bending- Holding device mot- Sheet metal removal with conveyor belt- Cutting gap and cutting angle m. Control programmable- Spare knife- Schermesser for 750 kg strength- Separate hold-down z. Cutting after crack- Hold-down pressure adjustable and readable from the front- 2 rocker stops- Finger guard with recessed grip- balls in the support table- Angle stop m. Norius- Footswitchus ...

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

CNC sheet metal shears make EHT type TSS 4-20Fabr. -No: 107785, year of construction 1998Technical specifications:Working length: 2020 mmmax sheet thickness at 450 N / mm 4 mmOil volume: 160 lelectr. Connection: 400 V, 50 HzDrive line: 7.5 kWDimensions approx: 2800 x 2150 x 2150 mm, weight approx: 4.5 tWith- CNC control ELGO P 8721- Hold-up device- Scrap chute- foot switch- automatic cutting angle- automatic cutting gap adjustment- 3 angle stops in front- Cutting line lightingin a little used and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic CNC swing cut guillotine shears make KNUTH type KHT D 3006Year of construction 2018Technical specifications:Max. cutting length: 3100 mmMax. sheet thickness: 0.5 - 6.0 mmCutting angle: 1.3°Number of hold-down devices:16Stroke :105mmNumber of strokes per minute:15Working table height: 865 mmNumber of support arms:3Oil tank: 200LMotor power: 15 kWDimensions approx.: 4110 x 2200 x 2100 mmWeight approx.: 7300 kgwith- Sheet metal holding device- D-Touch 7 control with touch screen for motorized backgauge 1000 mm and intersection- foot switchlittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Sheet Metal Shear Make MENGELE Type S 4 - 5000/3Machine -No: S 2237 5000/3 Year 1976Cutting length: 5050 mmMax. Sheet thickness: 3.0 mmlateral. Discharge: 300 mmCutting angle: 0.6 °Strokes per minute: 34Number of hold-downs: 22mot. backgauge: 0 - 1000 mmlateral. Angle stop: 2000 mmOperating pressure: 230 barHold-down pressure: 58 barOil filling: 200 lDrive power: 11 kWOutside dimensions approx: 5750 x 2500 x 1700 mmWeight approx: 15 tWith- mot. backgauge- Angle stop front- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Sheat metal Shear make EHT type EHS 6-50Machine -No: 19782 Year 1983Max. Sheet thickness: 6.0 mmCutting length: 5050 mmKnife length: 5100 mmCutting angle: 1 - 15 °Knife strokes per minute: 18Number of hold-downs: 26Pressure p. Hold down: 60 barOperating pressure: 280 barOil filling: 220 lDrive power: 12 kWWeight approx: 11 tOutside dimensions approx: 5500 x 2900 x 2100 mmWith- mot. back gauge 1500 mm with length indicator- Cutting angle indicator- Cutting angle adjustment- Cutting length limit- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make LOTZE type TS 3000/5machine -No: 2623003 year 1975Technical specifications:Max. Effective length: 3040 mmMax. Sheet thickness steel: 5.0 mmMax. Sheet thickness stainless steel: 3.0 mmOutside dimensions approx: 3750 x 1255 x 1600 mmWith- motor backgauge with handwheel fine adjustment- Cutting length limit- Angle stop front- Table extension- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic swing cut guillotine shears make HERA type HSS 3Machine -No: 557 built in 1984heavy, unbreakable all-steel designTechnical specifications:Passage: 1100 mmLarge sheet thickness at 400 N / mm 2.0 mmThroat: 200 mmNumber of strokes: 56 H / minStop length at the front: 1000 mmStop length at the back: 1000 mmMotor power: 2.2 kWWeight about 1500 kgDimensionswith- motorized backgauge- foot switch- front support arms- hydr. Hold-downused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Swing cut sheet metal shears make RAS type 52.31Fabr. -No: 23/7, built in 2000Technical specifications:Cutting range up to: 3100 mmmax.sheet thickness: 2.0 mmNumber of strokes per minute: 37Cutting angle: 0.9 degreesDrive power: 3.0 kWExternal dimensions approx L x W x H: 3580 x 1700 x 1220 mmWeight approx .: 1950 kgwith- CE marking- Angle stop in front- 2 table extensions- foot switch- Single stroke - continuous run- Cut material switch via hand leverwithout back gaugeused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools