shears 3100 used for sale

Heavy motorized circle Scissors make PARX type KSM 6 SMachine -No: 3962 Series -No: 36/79 Year 1979Shear performance up to 40 kg strength: 15 mmShear capacity up to 105 kg strength: 9.0 mmminute Diameter of the tube: 450 mmMax. Diameter of the tube: 1600 mmDischarge between the stand and knife: 625 mmCutting speed: 10 m / min.Drive power: 11 kWWeight approx: 8,2 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized sheet metal shear make LOTZE Year of construction approx. 1960 Working length: 1500 mm Sheet thickness (steel): 8 mm Motor power approx .: 17 kW External dimensions approx. L x W x H approx .: 2500 x 1900 x 1600 mm Weight approx .: 5 t With: - 2 front support arms - Angle stop - Foot release - Finger guard used, in very well maintained and functional condition Price on request. Delivery: ex warehouse or location free loading truck. Payment: net at takeover or by appointment. Technical data are not binding. Errors excepted. We would be pleased, if you like our offer and are always available for your queries. Best regards M. Waldeck WAHO Machine Tools

Crank sheet metal scissors make LOTZE type probably KShy 25Max. Cutting length: 2500 mmMax. Sheet thickness approx: 5.0 mmlateral projection: 70 mmTable width: 500 mmDimensions L x W x H: 3100 x 1600 x 1300 mmWeight: 4000 kgWith- Table extensionthe front cover plates are missingused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

METALPRES NHM 3006 hydraulic guillotine shears built in the Czech Republic in 2000, are used for precision cutting of black or acid-resistant steel sheets with a maximum length of 3000 mm. The NHM 3006 T guillotine shears have been regularly serviced and upgraded throughout their lifetime. In 2023, a general overhaul was performed with a net value of approximately PLN 16000, during which seals, clamps, controls, electrical installation with cabinet were replaced and the knives were sharpened. The price of the machine also includes a rack with saw for steel and a rack for sheet metal shown in the photos. The total weight of the METALPRES NHM 3000 3M machine is 2000 kg. Technical specifications of the METALPRES NHM 3006 guillotine shears - maximum cutting length: 3000 mm - maximum workpiece thickness (acid-resistant steel): 5 mm - maximum workpiece thickness (black steel): 6 mm - di ...

Sheet metal and steel shears manufactured by PEDDINGHAUS type 4 BR 8Year of construction 2013Sheet steel up to: 8,0 mmRound steel up to: 20 mmSquare steel up to: 18 mmKnife length: 175 mmWeight approx: 43 kgExternal dimensions: 600 x 18 x 500 mmvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Engine. Guillotine Shears Impact Shears Tin Shears Scissors Cutting Manufacturer: KRAMER Model TM IIa 3000x4,5 max. cutting length 3050 mm max sheet thickness at ST 40 4.5 mm Distance between uprights 3050 mm Projection 130 mm Table width 360 mm Strokes per min 30 pcs. Hold-down device 16 pieces Manual backgauge travel 5 – 550 mm Engine power 7.5 kw Machine weight 4000 kg Space requirements: W 3480 mm D 3600 mm H 1400 mm Foot switch Back gauge front support arms Angle stop The machine is in good condition and ready for immediate use. Machine runs very quietly. Forklifts available, freely loaded trucks Cheap shipping possible Location of the machine 48324 Sendenhorst for enquiries 0157-35496006 The price is net plus 19% VAT.

Motorized tin snips make TRUMPF type OMS 450Machine -No: 94278Technical specifications:Cutting capacity: 4.5 mmCutting speed: up to 4 m/min.small radius to be cut: 30 mmNumber of cuts per minute: 1400Power: 1100WPower connection: 380 V / 50 HzWeight approx.: 100 kgExternal dimensions: 350 x 2500 x 1100 mmWith- Pillarused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Combined lever shears make PEDDINGHAUS type 5 RP 10Machine -No: 992815Technical specifications:Blade length: 175mmPerformance sheet steel up to: 10 mmPower angle iron: 80 x 8 mmPerformance bar steel shears round: 22 mmPower bar steel shears square: 20 mmPerformance profile steel shears: 60 x 7 mmDimensions approx.: 700 x 200 x 700 mmApprox. weight: 107 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...

Cutting width: 3900 mm Dimensions (LxWxH): 5100 x 1700 x 3100 mm Height without legs: 2410 mm

Novastilmec shear with cutting capacity 4200 mm x 12 mm thick. Cutting angle, gap between the blades and support of the automatic sheets. Sheet metal stop 1005 (incidentally cuts the paper again).

Used Colgar CM 303 CNC shears Visible in Italy Sold as it is

LVD MVS 6200 x 4 mm Cuttinglength: 6200 mm Max sheetthickness st 45: 4 mm Depht of throat: 60 mm Strokes/min: 16 > 50 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 1,5° Electric motor (power): 7,5 kW Length: 6400 mm Depht: 2300 mm Height: 2100 mm Weight: 14 ton

NEW MACHINE – READY FOR INDUSTRY 4.0 ESA S640 CNC control Cutting length mm 3070 Nominal thickness mm 10 Frontal protections with photocells Pneumatic sheet support Cutting thread Cutting angle adjustment 0.50° – 2.00° Rear register stroke mm 1000 Shots at 1 minute 12-18 Main engine power kW 22 Approximate weight 11000 kg Use and maintenance manuals

The machine is in good technical condition. Max. length of cut sheet: 4000mm Max. thickness of cut sheet: 6mm Controlled rear stop with a range of 1000mm (stroke) Manually adjustable knife spacing Stroke height regulation Weight: 11,000 kg

Alligator shear ideal for processing weapons Fully Guarded As New 660mm blade length

Capacity 4100 x 6 mm Cybelec DNC 60 CNC control Pneumatic elevation table at the rear Electric cutting gap and angle adjustment

Capacity: 3200 x 3mm Renewed control panel from Schroder (original) New encoders and recently spindles High and sharp upper blade Hydraulic automatic top clamping

Machine weight: 28800 kg Max. cutting length: 6100 mm Max. metal sheet thickness: 10 mm Unloading in racks: 350 mm Maximum number of strokes per minute: 8-13 min

The machine is in good technical condition, it is possible to test it by agreement. Max. sheet length: 3000 mm Max. sheet thickness: 16 mm Weight approx.: 12000 kg Dimensions: 4200x1700x2300 mm

Untha RS 100 HD four-shaft shredder. Very good condition. Cutting unit new! With control cabinet and insertion troughs. Drive power 2 x 55 kW. With new 30 mm perforated screen!

fully hydraulic circular shears , capacity 6 mm ,

DURMA MS 2004 guillotine shears were built in 2008 in Turkey. The machine, characterised by the application of many facilities and modern solutions, guarantees precise and efficient machining of, among others, stainless steel, aluminium, copper and plain steel. A sheet metal with a maximum thickness of 4 mm is fed through ball transfers built into the work table, whose design protects the surface of sensitive materials from scratches and nicks. All machining process parameters are programmed on the intuitive DURMA ENC-100M control panel with a clear LCD display and memory for 50 programmes. During the cutting process, the rigid design of the machine ensures that sheet deformations are within tolerance, making both the workpiece and the cut-off ready for further machining. The DURMA MS-2004 mechanical guillotine shears are offered with direct drive, high-quality cutting knives with adj ...

Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Panel shears Sheet metal scissors used Manufacturer: RAS / REINHARDT Maschinenbau Type: 82.20 Cutting width max. 2040 mm Sheet thickness max. 2 mm 380 V Dimensions approx. 2500 x 1500 x 1100 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

1) Mechanical guillotine shear COLGAR mod. 3006 Year 1997 length 3050 mm width 32000 mm passage between uprights 250-500 thickness of sharp blades 7 mm 2) Mechanical guillotine shear COLOGAR mod. CS 1520 Length= 1550 mm Blade length = 1580 passage between uprights = 1600 Recess 250 mm. Cutting capacity with sharp blades 22 mm. 3) Mechanical guillotine shear COLGAR CM 3020 Year 1997 Useful cutting length 3050 mm Lamw length 3550 mm Passage between uprights 3465 mm Thickness 22 mm.

sheet width: 1550 mm plate thickness: 3 mm distance between columns: 1600 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 2,06 x 2,14 x 1,21 m Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DURMA SB 3020 hydraulic guillotine shears built in 2008 in Turkey are an ideal choice for machining stainless steel, copper, aluminium and plain steel. Workpieces with a maximum thickness of 20 mm are cut using extremely precise, hardened cutting knives with manual adjustment of the gap between the blades. The high-quality monoblock design, combined with the hydraulic system, additionally ensures the highest stability and machining performance, even during the most demanding challenges. To facilitate the operator’s work, special transport rollers have been integrated into the work table, on which the workpiece is fed directly under the cutting line. The machining parameters are programmed in the intuitive DURMA ENC 100M control panel with clear LCD display and memory for 50 programs. The DURMA SB 3020 guillotine shears also features a driven back stop with T-slots and sockets with d ...

Guillotine shears Manufacturer Kramer Type TM II a 4000 Year of construction 1988 2.5 mmm sheet thickness. Machine is in a used very good condition. With invoice and VAT.

Description with exact angle system cutting width 50cm

Description heavy automatic hydraulic plate shears / guillotine shears up to 50mm with cycle feed Working width approx. 155cm Thickness max. 50mm

The machine is in good technical condition, after prior agreement it is possible to test it. Cutting length: 3000 mm. Max. sheet thickness: 16 mm.

The machine is in good technical condition, can be tested under power. Cutting length:3000 mm. Max. sheet thickness: 10 mm.

sheet width: 3000 mm plate thickness: 3 mm distance between columns: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pile cutting machine, stack cutter, face cutter SCHNEIDER type Senator 155 Rubber, paper and veneer shears Masch. No. 60178 Year of construction 1968 Cutting length 1550 mm Cutting thickness approx. 125 mm Application height 140 mm Backgauge max. 1550 mm Motor power Knife drive 5.5 kW Mains connection 380 volts, 50 Hz - 2-hand operation for stroke triggering - automatic pressing by hold-down presses the stack of paper onto the table - Kickback (backgauge) with digital dimension selection and sequence cut adjustment via control - Backgauge adjustment via servo motor (motor and control has been retrofitted) Space requirement L x W x H 300 x 270 x 165 cm Weight 5100 kg good condition Ideal for cutting paper, cardboard, leather, cork, rubber or fabric reinforced rubber; used

Hydraulic guillotine shears STEINER type HTS 30/20 R Masch. No. 315 Year of construction 1982 Cutting length 3050 mm Cutting thickness 20 mm Backgauge 800 mm controlled Motor power approx. 30 kW Mains connection 400 Volt, 50 Hz - Backgauge with positioning control ELGO - Backgauge adjustment via ball screws - Safety light barrier SICK front as intervention protection - 3 pieces of material support arms with ball castors - electric foot switch - spare knife Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space required for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul.; used

Sale guillotine shears (guillotine) Safan B-Shear 310-6 2013 release in excellent condition, there are all documents on diagnostics and maintenance work performed. Running hours 12 674

4-fold combined profile steel shears PEDDINGHAUS type Peddy Masch. No. GJ 4405 Year of construction 1970 Notching device: rectangular notch 40 x 40 to 7 mm sheet steel Punch dimension 40 x 50 mm - stroke rate 40 strokes/min. - Table support 750 x 260 mm Profile steel shears: Profile shears at 90 angles 70 x 70 x 7 mm Profile shears at 45 angles 50 x 50 x 6 mm Bar steel shears:Cutting capacity round 28 mm Cutting capacity square 25 x 25 mm Flat steel shears: Cutting capacity max. 10 mm cutting capacity flat 80 x 6 mm- blade length 175 mm- usable length 135 mm - shear angle approx. 2 motor power 1.5 kW mains connection 380 volts, 50 Hz. - mechanical stroke tripping - bogie with material support Space requirement L x W x H 1200 x 750 x 1700 mm Weight 500 kg good condition; used

Oscillating shears KÖLLSCHEN type BSK 2000/2 Fabr. No. 69 1307 Year of construction 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Engine power 4 kW - Drive via gear motor with brake and crankshaft - Mechanical sheet metal hold-down - manual backgauge 500 mm - Stop adjustment via 2 handwheels, rear on the backgauge guide with dimension cala - front side stop left 720 mm- electric foot switch - manual central lubrication - control cabinet on the machine- machine stands on 4 pieces oscillating elements, approx. 100 mm height space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition; used

: gebraucht : 2021 : 9648 : prompt, Zwischenverkauf v : Spanien : 15900 € : 1 : 60 to : 250 mm : 5 : 40 x 11 mm : 32 1/min : 350 x 15 mm : 120 x 10 mm : 45 / 40 mm : 10 mm : max. 150x10 mm : 5 kW : 2100 mm : 1400 mm : 1600 mm : 1390 kg DEMO MACHINE with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release User Manual in german + CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

System: Oscillating cut Cutting thickness max: 12 mm Cutting length max: 3,000 mm Knives: 1 set new, 1 set used Machine weight 14.000 kg Machine dimensions LxWxH: 4.040x2.850x2.450 mm

Scissors for reinforcing steel or bars max 32mm

Sheet thickness: 7,00 mm Sheet width: 3150 mm Depth rear gauge: 1000 mm Guillotine with ELGO Length measuring device front Sheet support holding system backside Throat 500 mm Maximum sheet thickness:    7mm Max. cutting length:        3150mm Strokes on full length:     22mm Strokes in short 1000 length:45 Cutting angle:              0,30 - 3 Gr° Length backgauge:           1000mm Number of down holders:     21 Power:                      11kW Length:                     3800mm Width:                      2200mm Height:                  &nbs ...

Sheet thickness: 25,00 mm void: 2 Table length: 710 mm Table width: 560 mm Knife length: 200 mm Lauffer PT Hydraulic frame presses for metal forming; From 630 kN to 10.000 kN freely configurable for your application. Whether forming, punching, cutting or embossing, solid and variable press frame concept allows individual adaptation of the press size to your requirements. For smaller presses in monobloc design  R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg:           100000 Distance between column:755mm Table Length:          710mm Table Width:           560mm Table Height:          450mm Ram stroke:            200mm Approche speed:        350mm/min. Work ...