shear hidraulic used for sale

Guillotine shears Manufacturer Kramer Type TM II a 4000 Year of construction 1988 2.5 mmm sheet thickness. Machine is in a used very good condition. With invoice and VAT.

plate thickness:4 mm blade length:180 mm weight of the machine ca.:21 kg dimensions of the machine ca.:400 x 100 x 1500 mm

Capacity: 150 x 150 x 1.5mm

Please note: weighs approximately 3500kg, no suitable forklift truck present, buyer must take care of suitable housing himself.

offer 22537 Specifications: - working width 4040 mm - cutting capacity St 40 6 mm - Cutting angle hydro.adjustable 0.5 - 3 ° - Cutting gap adjustment hydr. - Number of hydraulic hold-downs 22 pcs -Mot. – Backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 p/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - with: - E-foot switch - Cutting line lighting - Pneumatically supported sheet metal lifting

Hydraulic guillotine shears Manufacturer Atlantic Type ATS3000 Year of construction 1996 max cutting thickness 6,0mm cutting length 3050mm New knife on machine in addition there are 2 knives plus 1 stump once new Machine is fully functional, has not been energized for 4 months Anschäge, circulation and documentation available.

The machine is in good technical condition. Max. length of cut sheet: 2000mm Max. thickness of the cut sheet: 6.3 Weight: 6725 kg Upon prior agreement, the possibility of a tour in progress.

Working width: 3000mm, an inspection is possible.

Description with exact angle system cutting width 50cm

Description heavy automatic hydraulic plate shears / guillotine shears up to 50mm with cycle feed Working width approx. 155cm Thickness max. 50mm

Working length: 3050mm, sheet thickness: 10mm.

Max. sheet thickness: 120mm, length: 2940mm, width: 3660mm, height: 2670mm.

Shaft diameter: 145mm, sheet dimensions: 650x1.5mm, without tools.

Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t.

Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t.

Working width: 3050mm, max. cutting capacity: 9mm, length: 3500mm, width: 2500mm, height: 2000mm, weight: 10t.

Specifications: Working length: 4080 mm Stand width: 3680 mm Pressing force: 320 to CNC control: DELEM DA controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke : 365 mm Projection: 410 mm Installation height: 535 mm Table width: 200 mm Working height: 1050 mm Hdr. Tool clamping at the top pneumatic die displacement CNC-controlled crowning 1 CNC-controlled bending aid CE marking Motor power: 37 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 24,5 tons The seller is not liable for typing or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without any warranty.

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 4x2000 SMO-2004-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 4.0 mm - Maximum working length: 2000 mm - Cutting angle: 0.5 - 1.5° Eufzrzpm0 - Strokes/minute: 6 - 20 - Backgauge retract distance: 600 mm - Motor power: 4.0 kW - Length: 2700 mm - Width: 1500 mm - Height: 1650 mm - Total mass: 2500.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working len ...

Max. working diameter round/ square/ flat: 30/ 28/ 30mm, length: 550mm, width: 1050mm, height: 1750mm, weight: 700kg.

Working width: 2040mm, max. sheet thickness: 3mm.

Stroke speed: 42/min, connected load: 2.5kW.

sheet width: 3000 mm plate thickness: 3 mm distance between columns: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pile cutting machine, stack cutter, face cutter SCHNEIDER type Senator 155 Rubber, paper and veneer shears Masch. No. 60178 Year of construction 1968 Cutting length 1550 mm Cutting thickness approx. 125 mm Application height 140 mm Backgauge max. 1550 mm Motor power Knife drive 5.5 kW Mains connection 380 volts, 50 Hz - 2-hand operation for stroke triggering - automatic pressing by hold-down presses the stack of paper onto the table - Kickback (backgauge) with digital dimension selection and sequence cut adjustment via control - Backgauge adjustment via servo motor (motor and control has been retrofitted) Space requirement L x W x H 300 x 270 x 165 cm Weight 5100 kg good condition Ideal for cutting paper, cardboard, leather, cork, rubber or fabric reinforced rubber; used

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x2500 SMO-2506-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade cl ...

Voltage: 220/ 380V, nominal current: 8/ 5A.

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x3200 SMO-3206-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm Eehs322 - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 14 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Total mass: 5200.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade ...

Max. working width: 3000mm, max. sheet thickness: 8mm, with documentation.

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 8x3200 SMO-3208-N Hydraulic press brake Specifications - Maximum thickness mild stainless steel: up to 8.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 15 - Backgauge retract distance: 1000 mm - Motor power: 11.0 kW - Length: 4300 mm - Width: 2000 mm Bwydfs9 - Height: 2100 mm - Total mass: 6400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - B ...

Max. workpiece thickness: 20mm, including one unused and originally packed set of blades.

Cutting length: 1250mm, table height: 830mm, connected load: 22kW, length: 1900mm, width: 2200mm, height: 1900mm, weight: 9.6t, with documentation, without spare parts.

Working width: 3000mm, max. sheet thickness: 6mm.

Working width: 2040mm, max. sheet thickness: 4mm, weight: 1.8t, an inspection is possible.

Hydraulic guillotine shears STEINER type HTS 30/20 R Masch. No. 315 Year of construction 1982 Cutting length 3050 mm Cutting thickness 20 mm Backgauge 800 mm controlled Motor power approx. 30 kW Mains connection 400 Volt, 50 Hz - Backgauge with positioning control ELGO - Backgauge adjustment via ball screws - Safety light barrier SICK front as intervention protection - 3 pieces of material support arms with ball castors - electric foot switch - spare knife Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space required for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul.; used

Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm

4-fold combined profile steel shears PEDDINGHAUS type Peddy Masch. No. GJ 4405 Year of construction 1970 Notching device: rectangular notch 40 x 40 to 7 mm sheet steel Punch dimension 40 x 50 mm - stroke rate 40 strokes/min. - Table support 750 x 260 mm Profile steel shears: Profile shears at 90 angles 70 x 70 x 7 mm Profile shears at 45 angles 50 x 50 x 6 mm Bar steel shears:Cutting capacity round 28 mm Cutting capacity square 25 x 25 mm Flat steel shears: Cutting capacity max. 10 mm cutting capacity flat 80 x 6 mm- blade length 175 mm- usable length 135 mm - shear angle approx. 2 motor power 1.5 kW mains connection 380 volts, 50 Hz. - mechanical stroke tripping - bogie with material support Space requirement L x W x H 1200 x 750 x 1700 mm Weight 500 kg good condition; used

Oscillating shears KÖLLSCHEN type BSK 2000/2 Fabr. No. 69 1307 Year of construction 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Engine power 4 kW - Drive via gear motor with brake and crankshaft - Mechanical sheet metal hold-down - manual backgauge 500 mm - Stop adjustment via 2 handwheels, rear on the backgauge guide with dimension cala - front side stop left 720 mm- electric foot switch - manual central lubrication - control cabinet on the machine- machine stands on 4 pieces oscillating elements, approx. 100 mm height space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition; used

: gebraucht : 2021 : 9648 : prompt, Zwischenverkauf v : Spanien : 15900 € : 1 : 60 to : 250 mm : 5 : 40 x 11 mm : 32 1/min : 350 x 15 mm : 120 x 10 mm : 45 / 40 mm : 10 mm : max. 150x10 mm : 5 kW : 2100 mm : 1400 mm : 1600 mm : 1390 kg DEMO MACHINE with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release User Manual in german + CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

System: Oscillating cut Cutting thickness max: 12 mm Cutting length max: 3,000 mm Knives: 1 set new, 1 set used Machine weight 14.000 kg Machine dimensions LxWxH: 4.040x2.850x2.450 mm

Scissors for reinforcing steel or bars max 32mm

offer 21001 Specifications: - working width 3050 mm - cutting capacity St 40 10 mm - Cutting angle 2 ° - Cutting gap adjustment by manual hand - Number of hydraulic hold-downs 17 pcs - Motor - Backgauge 20 - 1000 mm - front angle stop + support arms - Hydraulic drive 400 V / 22 kW - Table height approx. 900 mm - Space requirements incl. backgauge, without front support arms -ca. W 3900 x H 1950 x D 2250 mm - Weight approx. 7800 kg - with: - E-foot switch - Cutting line illumination - - Cutting length preselection

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 10x3200 SMO-3210-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 10.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 12 - Backgauge retract distance: 600 mm - Motor power: 15.0 kW - Length: 4000 mm - Width: 1800 mm - Height: 2100 mm - Total mass: 8400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade  ...

Sheet thickness: 25,00 mm void: 2 Table length: 710 mm Table width: 560 mm Knife length: 200 mm Lauffer PT Hydraulic frame presses for metal forming; From 630 kN to 10.000 kN freely configurable for your application. Whether forming, punching, cutting or embossing, solid and variable press frame concept allows individual adaptation of the press size to your requirements. For smaller presses in monobloc design  R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg:           100000 Distance between column:755mm Table Length:          710mm Table Width:           560mm Table Height:          450mm Ram stroke:            200mm Approche speed:        350mm/min. Work ...

Sheet thickness: 7,00 mm Sheet width: 3150 mm Depth rear gauge: 1000 mm Guillotine with ELGO Length measuring device front Sheet support holding system backside Throat 500 mm Maximum sheet thickness:    7mm Max. cutting length:        3150mm Strokes on full length:     22mm Strokes in short 1000 length:45 Cutting angle:              0,30 - 3 Gr° Length backgauge:           1000mm Number of down holders:     21 Power:                      11kW Length:                     3800mm Width:                      2200mm Height:                  &nbs ...

Sheet thickness: 2,00 mm Sheet diameter: 2 mm Knife diameter: 0 mm BMS - KSA 1500 x 2.0 Decoiler for coils up to 1500 mm Straightner with 9 rolls adjustaable to 0.2 -  2 mm Slitting roll with 3 knive blades Cutting plate shear up to 2 mm Positioning & Feed & Speed controller Maximum sheet thickness:2mm Length:                4500mm Width:                 2000mm Height:                1600mm Weight:                4000kg

Guillotine shears TS S30-6 Year of construction: 1969 Sheet thickness: 6mm Sheet width: 3000mm Depth stop electr. adjustable Front editions available Dimensions: approx. 3400 x 1500 x 1700 mm Weight approx. 7 T Finger/hand protection available Sale without guarantee and without return, the guillotine shears can be tested on site for function.