shardlow used for sale

SANTANDREA DUAL SHAFT HYDRAULIC SHREDDER, Type H50 130, very good conditions, Shafts length 1.300 mm, with top hydraulic ram, 50 mm.knives - 1 hook + spacers + cleaning teeth, Air/oil heat exchanging unit, Shredding chamber mm. 1.300x900), Electric motor 37 kW 400v 50hz, Hydraulic power station, Electrical control panel, Loading hopper, CE compliance, Users manual, electrical drawings, very sturdy structure, The rotation of the shafts is determined by 2 reduction stages composed by 1 gearbox with 2 large gears in an oil bath + 1 planetary gearbox., St.Andrea are longlasting machines, width: 1.300 mm. (51.18), Power: 37 kw

General SKUR0464 LocationBarneveld MakeSHA Siegmund Henning Anlagentechnik GmbH (D) TypeRFI114x00760-0E064 / 15_00462_00 No.05662 Year of construction2015 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter100 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter100mm Pitch50mm Shaft diameter40mm Screw length950mm Inletdia. 300mm Outletdia. 100mm (2x) With motor0,55 kW 230/400 Volt Information Total height0,4 M Weight120 Kg CEcheck Floorspace1,6x0,5 MMetering screwsSHA GmbHDosing units > Metering screwsBrand > SHA GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ma ...

production extrusion line for the production of binder for baling from PP KIT TO THE FINISHED PRODUCT (AS SHOWED IN THE PHOTO) The line is from 2018 and it works flawlessly Are we looking for a strategic partner to sell an item Sale of the building 1000 m / 2 - price negotiable I am at your disposal for more information

Isobar monobloc bottling machine with 16 washing heads, 16 filling heads and 6 capping heads Belt conveyor Automatic labelling machine Rotary accumulation table at the beginning of the line and accumulation table at the end of the line Compressor and vacuum pump Machine not used much due to change of company orientation

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

HELMA- model CF-40-copy milling/shaping machine feed thru with work piece return (2) milling spindles- 18" max. distance between the spindles centers- 28" x45" Table - (2) 30mm. work spindles- 10,500 RPM spindles- 4"max. cutting height - vertical adjustment 10 mm.- (2) 7 1/2 hp. spindle motors - 1/2hp. variable speed feed motor 5' to 30' per min.- 2,200 lbs. $7,500

Cytocentrifuge Cytospin 4 Shandon https://www.fishersci.fr/shop/products/cytospin-4-cytocentrifuge-cytos pin-4-2/15721433 VERY GOOD CONDITION Date of purchase: September 2011

Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               Pneumatic do ...

this extra information is standard for this model. Please always double-check the details during a visit The Shakti Lab Mixer with Jacket Bowl, Scrapers, and Vacuum is a cutting-edge pharmaceutical machine designed for precision mixing of liquid formulations. Renowned for its reliability and efficiency, this model offers advanced features to meet the demanding needs of pharmaceutical laboratories and small-scale production facilities. Equipped with a jacketed bowl, this mixer allows for precise temperature control during the mixing process, ensuring optimal conditions for sensitive pharmaceutical formulations. The inclusion of scrapers ensures thorough mixing and homogenization, preventing material adherence to the bowl walls and ensuring consistent product quality. The vacuum functionality enhances the mixing process by removing air bubbles, resulting in a smoother and more uni ...

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98 (year 1998), NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motors, 3ph, 660V, 50Hz. The mixer is in serviceable condition, but is without electrical drives/operator controls, hydraulic unit or lubrication unit (Can all be quoted if required). Full manuals/drawings available. Available: Immediately (ex stock UK).

Shaw Intermix K4 MK5 Mixer Body and Hopper Foot-Center of Shaft= 700mm. Diameter of Shaft: 180mm. With dust seal holders and drop door motor Without brass dust seal rings

Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) PRINTER: - Epson CW-C6000

Francis Shaw 18/22\ Dump Extruder, Crammer feed Length of Screw 9ft 6\. Reliance 400hp D.C., 1150 r.p.m., 480 volt. Large Hopper/Chute to next floor level.

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

1 x Francis Shaw model K1 Intermix MK4, Installed new in 1991, fully maintained and checked over by HF in 2005. Net chamber volume: 5.5litres, pneumatic hopper, hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor and controls. Castell Key interlock system Complete and in excellent condition. Chamber and rotors are like new! O/a dimensions: 3m x 1.2m. Can be seen working. All manuals/documentation available.

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel

Complete Shavereinheit with handpiece, foot switch, 2 sterilization box for the Shaverpaltes. 46 Shaverplates Fully functional. Unused, mint condition, used only for demonstration purposes.

Choice of 2 x Francis Shaw K7 MK3 intermix, Total Volume: 320L, Useful volume 210L, Order number: 6061/1 and 6061/2, Year of manufacture: Oct 1986, NR2 Rotors, SSA type dust seals, Hydraulic drop door with linear actuator, Pneumatic hopper, Zamech full unidrive gearbox, Type: WD263-22.5, ratio 22.5:1. with 1000kW, 990rpm, 6000V motor. Rotor speed 44rpm. With modern starter panel, but without operator controls.

1 x Francis Shaw model K2A MK4 Intermix Machine number 11242.8, Year June 1994, NR2 rotors, Working batch volume 27 - 36 litres Drop door with linear actuator, SSA dust seals, Pneumatic hopper, Hansen semi unidrive gearbox, Rating 150kw, 1475/32rpm, With ASEA 152kW, 1510rpm DC variable speed motor and controls.

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

1 x Francis Shaw model K1 Intermix MK4, M/c number: 4176, Date: Jan 1991, Net chamber volume: 5.5litres, NR2 style intermeshing rotors, Pneumatic hopper, Hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor. 2 x Tool Temp temperature control units. The mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed.  All other components checked, serviced or replaced during re-assembly.  The mixer will be supplied with NEW control panel with PLC, touch screen PC with data capture.

K-280 sharpener is a device thanks to which you can professionally sharpen various types of grinder knives and plates in your plant. The sharpener is fully automated. The built-in programmer allows the user to program parameters such as time, thickness of cut and tempo. The device has a magnetic holder built-in. The machine perfect for meat processing plants and the meat industry. Specification: Producer: BMG TRADE Model: K280 Dimensions: 1150 x 570 x 625 (mm) Power supply: 400V 50Hz Total motor power: 2.67 kW Cooling pump power: 0.12 kW Rotation: 2860 rpm Tank capacity: 33 L Thickness of cut: 0.2mm; 0.4mm; 0.8mm; 1.2cm; 1.6cm; 2,00cm Program of grinding pace Rotation: Right / left Weight: 250 kg

Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel

1 x Francis Shaw model K4 intermix, Machine number: 4549, Original Year of manufacture:1992, Chamber volume: 91 litres, Batch weight: approx 76kg (at 70% F.F. and 1.2 S.G), Hydraulic hopper, Hydraulic drop door with linear actuator, Full unidrive David Brown gearbox - power rating 450kW, ratio 29.065:1 (input speed 1500rpm, output 51rpm), In good condition, but currently without motor or controls. Manuals/drawings available.

This Brown & Sharpe Mistral Measuring machine was manufactured in the year 2001. It has 3 axis. The machine has a table size of 1250 x 2200 mm.

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

Qty. 1 Second-hand wall paper production line – already dismantled & in warehouse Mfc.: Shin Shang Built: 1998 New electrical incl. cables in 2019 Production stopped in 2/2023 In line system Printing width: 850 mm 6 colors printing station Hot embossing system PVC coating system Six colors high speed paper roll CI flexo printing machine Automatic high speed flexo printing machine High speed CI type Central Drum 6 Colors Flexographic Printing Machine for paper OPP/ BOPP/ PP plastic film rotogravure printing machine

Francis Shaw 30mm Extruder Roller Feed LD ratio 15:1 Year 1993

Surface grinding machine, grinding machine -Surface grinding machine: Brown & Sharpe 612 Micromaster -Magnetic plate: 300 x 150 mm -Table: x 370 mm/y 180 mm -Max. Grinding height: 250 mm -Grinding wheels diameter: 180 mm -Transport dimensions: 1000/1400/H2280 mm -Weight: 772 kg

Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine -Precision universal cylindrical grinding machine -Max. Shaft diameter: 203 mm -Max. Grinding length: 490 mm -Collet: Ø 32 x 87 mm -Grinding wheels diameter: 160 mm -Dimensions: 1660/1500/H1500 mm -Weight: 1802 kg

Linear blow molding equipment for sale with a capacity of 6000 bottles/hour for 0.5 pet containers and 4000 bottles/hour for 1.5 pet containers. There are guarantees, no defects. Main equipment parameters 3500, 0 × 1450, 0 × 2000, 0 Release year 2020 Country of origin Shanghai, China, all packed and ready to ship. The price includes all the necessary additional equipment for the full cycle of production of pet containers. There are also 4 bottle designs included. We can connect everything at your facility and make start-up equipment. 1. Automatic feeding of the preform to the blow molding machine 2. High pressure compressor 3.2M³/3.0MPA 3. Low pressure compressor 2.0M³/1.0MPA 4. Dehumidifier and air purifier 5. Air buffer for 500 bottles. 6. Preform cooling equipment. 7. Filters Includes 4 preforms (included in the price) 1. Presform 500ml 4 bottles (2  ...

CHICKEN GRILL ALTO-SHAAM - AR-7EVH ,HAXEN- CHICKEN GRILL approx. 28 chickens Professional Grilled Chicken Oven with Rotisserie Function Mountingfree-standing Number of furnaces / chambers 1 Makes perfect cooking the center of attention. The AR-7EVH electric rotisserie oven can be displayed anywhere in the customer's field of vision, without the constraints of the necessary hoods. It has an integrated ventilation system that has been fully tested and certified by UL for safety and hygiene. A powerful CFM fan pulls steam and smoke out of the furnace chamber to filter out greasy fumes, smoke and odors. Checked cleaned New Door seal

General SKU266U440 LocationBarneveld MakeSharples centrifuges LTD. TypeMV8816.3.38Y.1JY No.73.110340 Year of construction1973 Main Features MaterialMild steel/Stainless steel Motor1.5 KW Specified Features - Separator Separatorcheck Motor1,5 kW,220-250/380-420 volt, 2800 rpm, Max. rotor speed15000rpm InletDia:50 mm Liquid outletDia:50 mm Solids outletDia:30 mm MaterialSilicon steel 1.5023, Stainless steel 1.4306 (304L) Information Mounted on mild steel framecheck Total height1,6 m Weight400 kg Floorspace1,0x0,5 m Extra SpecificationsMax bowl speed 15.000 rpm, inside diameter 105mm With coil jacket SeparatorsSharplesCentrifuges > SeparatorsBrand > Sharples What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKU046C162 LocationBarneveld MakeSharples-Stokes / Pennwalt France TypeTornado Mill 44F No.80 01 Year of construction1980 Specified Features - Hammer Mill Material finishMirror polished Main Features Motor4 KW Inlet diameter250 mm Width120 mm Hammer Mills MaterialStainless steel Hammer mill(1x) Rotor sizedia. 250x120mm Fixed hammerscheck With sieve cage(± 20x20mm) Inletdia. 145mm Motor4,0 KW, 380 Volt Speedmax. 5200 Rpm Information Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,2x1,0 M Total height1,8 M Weight300 KGHammer MillsSharplesMills > Hammer MillsBrand > Sharples What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...

General SKU351S826 LocationBarneveld MakeSharples (UK) TypeDSNX4250DS306 No.91/115345-01A Year of constructionunknown Main Features MaterialStainless steel Motor30 KW Specified Features - Decanter Decantercheck Screw length1850mm Inletdia. 50mm Liquid outlet120x120mm Solids outlet300x300mm Motor30 kW 380-415 Volt Max. rotor speed3150 rpm MaterialStainless steel Information Mounted on framecheck Floorspace4,0x2,6 M Total height3,0 M Weight4200 KgDecantersSharplesCentrifuges > DecantersBrand > Sharples What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Material: stainless steel Weight: 350 kg Length x Width x Height: 1500 mm x 1200 mm x 1250 mm max.rotor speed : 5000 Upm, max. z-factor : 2180. Drum diameter : 150 mm, max. charge : 77 dm³. Drive : 5,5 kW u. 0,75 kW. Very good condition. Are you looking for something else? Write us below!

Robinson 60” (1500mm) x 22” (550mm) Two Roll Mill Hand operated nips Water cooled rolls Rotary joints for steam heating / water cooling Electric Autostop (kicked reverse stop) Lunn Safety Bar Bull wheel drive The Mill sits on a fabricated bedplate With Gearbox, Motor and Control Panel

Refer to code 1002 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1003 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1118 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1119 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Filling station for oil, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump -operated: by hand -2x: separate tanks with pumps -with return: into the tank -Dimensions: 800/530/H1100 mm -Weight: 88 kg/piece

Filling station for oil, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump -Hand: operated -with: return to the tank -Number: 2x pumps available -Price: per piece -Dimensions: 580/590/H1005 mm -Weight: 70 kg/piece

Manufacturer: Alfa Laval Type: P3000 Year of construction: 1980 Max. sludge density: 1.25 kg/dm Max. drum speed: 4000 rpm

The machine is designed for steam heating up to 10 bar (140°C) or water cooling and has a capacity of about 3.45 kG with a specific gravity of 1.0, i.e. working volume about 3.45 l. Flow drive of 60 hp, suitable for impeller speeds of 88 to 8 rpm, mixing chamber is steel housing, inner surfaces chrome-plated

dimensions of the machine ca.: xx m amplification -fold: xx diameter: xx mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Screen size: 935 x 525 mm or 42' Approx. Onsite Dimension. (l x w x h): 1,000 x 400 x 700 mm, weight approx.: 15 kg

Approx. Onsite Dimension. (l x w x h): 600 x 600 x 1,300 mm, weight approx.: 100 kg