self adhesive used for sale

HOT IRON OSCILLATING SAW & OIL HYDRAULIC FEEDING CONTROL SYSTEM

Handy hydraulic punching bracket with 70mm projection. Maximum punching capacity Ø24mm in 16mm steel. A double-acting hydraulic unit with a maximum printing capacity of 700bar. This new machine comes from a warehouse clean-up. Additional punching tools would be sold separately.

Clay court roller Length 1 m Width 1.55 m Height 0.80 m Weight approx. 250 kg Three-point mount Cat. 1

Several different machine frames made of steel are offered. Partly with controls, control cabinets, ladders, stairs, protective grilles, Engines equipped. Racks can be dismantled and transported away on site.

A pipe shredder for wood chips is offered with a spare sieve, hole diameter on request Self-made, connection: 380 volts

Capacity: 56 cbm bolted segment construction with discharge chute with sturdy steel construction

Overview This labeller was built in 2014 by Italian manufacturer Framax. It is an automatic rotary self-adhesive labelling machine for glass bottles with a capacity up to 4,000 bottles per hour.  Techn. Details  Capacity: up to 4,000 bph (0,33l glass bottle, wrap-around label) 2 labelling stations  Max. height of the paper passage 200 mm Max. speed of the output of the paper: 32 m/min. Max. roller outer diameter 300 mm Max label length 180mm Voltage: 400V, 50 Hz  Stainless-steel pass-through conveyor belt (2.500 mm) Stop of the machine in case of container jam-up Low wear and noise levels due to alternated steel and zellamid transmission gears Self-adhesive labelling station speed variation automatically synchronized with the machine  Photocell for paper stop automatic self-regulation for the read-out of the different label colours Photocell of presence of the container Controls pan ...

Overview The labeler was built in 2002 by the Italian manufacturer Cavagnino e Gatti. The machine applies self-adhesive labels to glass bottles. The labels come from the roll and so you are flexible in the dimensions. Technical details 7.000 bph Application for glass bottles Recently used formats 0,375l until 1,0l glass bottels 200 ml PET-bottle 3 self-adhesive stations Electrical power: 3,5 kW Compressed air: 25 l/ min, 5 bar

Overview  The labeler was manufactured in 2004 by the German manufacturer Gernep. The last service was carried out in October 2021. Various label combinations can be realized with this machine. Including the application of wet glue and self-adhesive labels in combination on the bottles. The machine is sold without label monitoring. The machine is expected to be in operation until the end of 2024 and can be inspected at any time. Technical details  Output: approx. 6,000 bottles/h   Formats: 250ml, 750ml, 1,000ml  Right-left machine  2 wet glue stations  3 self-adhesive stations  12 bottle plates  Automatic machine. Lubrication  Bottle alignment unit 

NERI DL400 self-adhesive labeller for bottles etc., with two labelling heads, suitable for bottles from 80 to 180mm diameter/width and from 30 to 120mm high. Output up to 100 containers per minute, all stainless steel construction.

self adhesive labelling machine, work direction: left-right, safety housing, 4 stations,

For self Adhesive Labels and Wet Glue Format Parts for Bottle Size 0.375l , 0,75l , 2.0l More then 300 machines new and second hand on our seema .de

Labelling machine for self-adhesive labels with 3 stations Front, back, top or wrap-around (roll-on) label Label width: 5-300 mm Label length: 10-500 mm Bottle format: round bottles and square bottles Capacity: up to approx. 6000 bph. (depends on bottle size) Complies with CE directive Weight: approx. 800 KG Dimensions: 3000（L）x1300(W)x1800(H) mm. Etimax Website: https://etimax.seema.de/  YouTube Video: https://youtu.be/zuztvYhDkNc  Equipment: - TouchScreen SIEMENS - Control SIEMENS - Inverter SIEMENS -Station 1 front label -Station 2 back label/wrap-around (roll-on) label -Station 3 top label -belt conveyor for stabilising the containers with drive -2 side belt conveyors in the infeed for separating the products More then 300 machines new and second hand on our seema .de

TECHNICAL DATA Labelling machine for self-adhesive labels with 2 stations Front, back or wrap-around (roll-on) label Label width: 5-300 mm Label length: 10-500 mm Bottle format: round bottles and square bottles Capacity: up to approx. 6000 bph. (depends on bottle size) Complies with CE directive Weight: approx. 600 KG Dimensions: 2800(L) x 1300(B) x 2400(H) mm Etimax Website: https://etimax.seema.de/  YouTube Video: https://youtu.be/zuztvYhDkNc  EQUIPMENT: TouchScreen SIEMENS Control SIEMENS Inverter SIEMENS Station 1 front label Station 2 back label/wrap-around (roll-on) label -belt conveyor for stabilising the containers with drive -2 side belt conveyors in the infeed for separating the products More then 300 machines new and second hand on our seema .de

Overview  The labeler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Tandem version consisting of  4 x SES-120III mounted on the left  2 x SES-120III mounted on the right Max. label height 120 mm Max. container dimensions: Height: 50-300 mm Ø: 20-100 mm Control Siemens S7  Control box IP 54 splash-proof / stainless steel version Photocell for label scanning wide fork width Device for label control  Fully automatic tandem changeover / pneumatic Automatic separation device. electric / right left 2 x automatic winding station incl. counter pressure plate Inkjet system included, Domino Ax350i

2 labels fron and back with capsuling machine More then 300 machines new and second hand on our seema .de

Capacity: up to approx. 4.500 bph Working direction: left-right Format Parts:                 0.375 Bord 0.375 Schleg                 0.5 Bord                 0.75 Bord  0.75 Schleg                 1.0  Bord   1.0 Schleg                 1.5l Bord   1.5 Schleg More then 300 machines new and second hand on our seema .de

Equipment: Double-sided adhesive tape dispenser for folder-gluer is controlled by an existing electronic glue application control system. controlled, 24V valve, clamping over 30mm square, pneumatically driven cutting knife device.

The universal rotary machine for top flexibility in self-adhesive labelling. The Pago System 630 is based on a sturdy rotary machine and the powerful Pagomat 6 series labelling heads. The system is designed for self-adhesive labelling of all kinds of products and for applications in every industry. labeler PAGO SYSTEM 630M producer: PAGO TYPE: 720.12T.S2.E2 Year: 2003

Neri ETA 400S self-adhesive vignette labeller for top labelling of cartons or similar objects. Carton size range (lying flat) from 40 x 110mm (W x L) to 165 x 360mm (W x L). Label size range from 10 x 13 mm (W x L), to 90 x 250 mm (W x L). Infeed via 400-capacity carton magazine, carton discharge via shingling conveyor for easy carton removal. Includes PCE label presence control with rejection of faulty labels and rejection crosscheck. Capacity up to 250 cartons per minute.

Bausch + Ströbel ESA1001 self-adhesive labeller for ampoules, vials, etc., suitable for containers from 6mm to 36mm diameter, and from 20mm up to 140mm high. Includes format parts for Ø 9,75 x 48 mm high, Output depending on size of container and label up to 15,000 per hour. In 2019 the following upgrades were completed: - New Siemens S7-1500 PLC controller - Centralised touch-screen HMI for control of all parameters - Servo-drive for the label feed - New integrated DC drives and absolute encoder - upgraded safety circuit and guarding to the latest standards

Multivac MR 335 tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons, 2 label dispenser model SUPER MR4000, label passage width max. 50 mm, label reel maximum diameter 360 mm, reel core diameter 76 mm, labelling speed up to 1.2 m/s, width of through conveyor 190 mm, speed of conveyor from 0.35 to 1.08 m/s, infeed/outfeed height approx. 820-920 mm, machine on wheels, electrical connection 230V/50Hz, 16A, maximum load 2.5 kW, compressed air 6 bar, machine floor space approx. 2738 x 1210 mm (WxD), machine height approx. 2300 mm, machine net weight approx. 700 kg

PackLab WING REPC FWB60 self-adhesive labelling machine for front & back labelling for cylindrical, oval or rectangular shaped bottles, etc., 2 label applicator type M60 DX 250, label speed 60 m/min., outer diameter of the label reel max. 400 mm, core diameter of the label reel 45-75 mm, label carrier tape with a maximun height of 250 mm, label width from 15 up to 480 mm, maximum label height approx. 245 mm, conveyor width 80 mm, top stabelising belt, press-on belt with a height of approx. 110 mm, electrics 400V/50Hz/3PH, machine floor space approx. 4140 x 3000 mm (LxW), machine height approx. 1900 mm, machine net weight approx. 950 kg

milling station Dust and schnitzel suction PVA (cold glue) back glue PVA (cold glue) side glue Gaze station Stack envelope feeder Envelope groove 2 to 6 times Still in operation: No Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

NERI DL400 type V duplex vignette labeller, for top labelling of cartons or similar. Fitted with two labelling heads, carton size range from 80 x 30mm (W x L)) to 180 x 120mm (W x L). Output up to 100 cartons per minute. All stainless steel construction.

Type: 9T S2/E2 SENSITIVE Model: A-720 Machine capacity: 135 bottles per minute

Nordson 3100-2AA32; State as is; only checked for function; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Schmedt Praecoll; good condition; 2.glue basin; Block width 110-450mm; Block height up to 345mm; Blockstaerke up to 82mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

spare parts - cook bolinders - glue application with gluing combs Ccmealplm For adhesive application on compact wedge zinc systems (compact wedge zinc machine ) Praezisions glue comb system with working width max. 250 mm, 2 tine laenia 15 mm or alternatively 20 mm

M.No: 612155217 Equipment / Additional information: Binds from 2 sheets to 60 mm max. cover width : 400 mm production up to 500 books/hr. LCD control panel glue tank with 2 application rollers, scrapers milling with high power waste extraction soft book ejection ramp, high capacity book cooling vertical stacker book size: max. 320x385 mm (spine) // min. padding mode: 90x75 mm (spine) min. perfect bind mode with BBR reception : 100x100 mm min. perfect bind mode without BBR reception : 140x210 mm cover size: max. 685x385 mm // min. 200x100 mm cover weight: 80-250 g/m2 cover pile height: 60 mm gluing temperatur: 140 - 165°C (sensitivity + 2°C) with vertical book stacker BBR - capacity 70 cm

3 MONTHS LA-POSTPRESS WARRANTY Excluding electronics Offer consists of: - Single clamp perfect binder BQ-270 Horizon BQ-270 Single clamp perfect binders - Brackets: 1 - Spine gluing: Hotmelt - Side gluing: Hotmelt - Book block thickness: integrated measuring station (outside the pliers) - Milling machine: with suction - Milling depth: adjustable - Envelope feeder: suction drum feeder with 4-fold creasing - Technology: Touch & Work - Job memory: 200 memory slots for repeat jobs - Paper size: max: 320 x 310 mm; min: 135 x 115 mm - Envelope format: 660 x 320mm; min. 240 x 135mm - Book thickness: max. 50mm; min. 1mm - Turnover: 90 - 300 g/sqm - Handling stack height : max. 70mm - Power: max. 500 cycles/h - Dimensions: 2.720 x 910 x 1.545mm - Current: 400V/ 50Hz - 2.7kW - Weight: 900kg On request, we can organize the following points for ...

Perfect binder - cold glue Gantenbein Model Bufalo BAFC-33 Year 1966 Working width 330 mm Speed up to 240 cycles per hour Grinding roller sand paper roll and grinder knife roll Details automatic movement of the wagon Available Direct

Perfect binder - cold glue Gantenbein Model Bufalo BAFC-33 Year 1970 Working width 330 mm Speed up to 240 cycles per hour Grinding roller sand paper roll and grinder knife roll Details automatic movement of the wagon Available Direct

DIRECTLY FROM THE PRINT SHOP Offer consists of: - Single clamp perfect binder BQ-280 PUR - 2kg drum melt from SM-Klebetechnik Horizon BQ-280 PUR Single clamp perfect binders - Brackets: 1 - Spine gluing: PUR - Glue filling: by barrel melting - Side gluing: Hotmelt - Book block thickness: integrated measuring station (outside the pliers) - Milling machine: with suction - Milling depth: adjustable - Envelope feeder: suction drum feeder with 4-fold creasing - Technology: Touch & Work - Job memory: 200 memory slots for repeat jobs - Paper size: max: 385 x 320 mm; min: 135 x 105 mm - Envelope format: 660 x 385mm; min. 225 x 135mm - Book thickness: max. 50mm; min. 1mm - Turnover: 80 - 350 g/sqm - Envelope stack height: max. 70mm - Power: max. 500 cycles/h - Dimensions: 3.055 x 905 x 1.520mm - Current: 400V/ 50Hz - 2.7kW - Weight: 900kg O ...

Hot glue book spine glue Book spine milling station for books max H440xB280xD40mm