scrap metal shear used for sale

Cross-flow scraper mobile version for the treatment of mixed waste fractions (municipal waste, biowaste, scrap metal, packaging, etc.) - Material input via vibrating chute - Efficient shredding in QSZ (1,600 mm) - Material transport via discharge belt below QSZ - Material discharge via conveyor belt (foldable) - Metal sorting by means of an overbelt magnet (neodymium) - Hook lift holder for transport - Motor power: 160 kW, 50 Hz, 400 V -Material discharge: screen discharge made of wear-resistant steel, screen plates are individually replaceable, Various hole geometries and sizes possible, external discharge box with flange connection for dust extraction - Contaminant discharge: discharge opening with hydraulically operated slider, incl. hydraulic unit and inductive end position sensors - percussion mechanism: chain mounting system for the use of up to fou ...

Storage box or scrap box according to photo. The box can be transported by forklift or crane. In the case of crane transport, there is a third eyelet at the bottom for tipping. Weight approx. 411 kg Multiple available! Price per piece!

Band width: 150mm; Table size: approx. 2500mm x 800mm; Suction port: 140mm; Motor power: 3kW; Machine length: approx. 3400mm; Machine width: 1200mm; Weight: 400kg; Robust design also allows the machining of longer workpieces grinding unit swivels, thus can also be used as an edge grinding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the abrasive belt High belt speed of 17 m/s right-counterclockwise rotation Upper sanding sole with graphite coating 4-ply sprung sanding pad With movable sanding pad for oblique surfaces Smooth-running grinding table even under high loads due to heavy workpieces Optimal price-performance ratio

TMC PADOVAN MARGARINE & SHORTENING CONTINUOUS CRYSTALLIZER VOTATOR KOMBINATOR SCRAPE SURFACE HEAT EXCHANGER FOR MARGARINE AND SHORTENING CRYSTALLIZATION CYLINDER DIAMETER 40 CM CYLINGER LENGTH 220 CM WORKING PRESSURE 70 BAR COOLING GAS AMMONIA MOTOR POWER 45 KW YEAR: 2012

Condition: Very good condition

Vise, bench vise, locksmith vise, parallel vise, heavy duty vise -Parallel vice: jaw width 150 x 30 mm -Wingspan: 190mm -Number: 1x vices available -Price per piece -Dimensions: 485/210/H190 mm -Weight: 26 kg

Vise, bench vise, locksmith vise, parallel vise, heavy duty vise -Parallel vice: jaw width 150 x 30 mm -Wingspan: 240mm -Dimensions: 490/325/H200 mm -Weight: 26 kg/pc.

Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg

ID2757 Scraper conveyor scraper conveyor 13 m long, 115 cm wide inside, 180 cm wide outside Scraper conveyor 13 m long, 115 cm wide inside, 180 cm wide outside

Dehairer Abele Total power: 12 kW Engine: 2.2 kW Two-shaft with ejection arm External dimensions: 2200 x 900 x 1300 mm Working dimension: 1700 mm Condition: Used, very good

General SKUR0090 LocationBarneveld MakeSchröder & Co (D) Typemanufacturer plate is missing No.30-392 Main Features MaterialStainless steel Volume2 Ltr. Motor2.2 KW Specified Features - Scraped surface heat exchanger Capacity2 Ltr. Inletdia. 25mm Outletdia. 25mm With motor2.2 kW 230 Volt With variable speed drivefrequency controller Scraped surface heatexchangers MaterialStainless steel Cylinder sizesdia. 95x350mm Inletdia.25mm Outletdia.25mm Motor2,2 kW 230 Volt With variable speed drivefrequency controller Information Mounted on wheelscheck With switchgearcheck Floorspace1,3x0,4 M Total height1,4 M Weight260 KgScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...

General SKU354T1003 LocationBarneveld MakeChemtech International Ltd Type212W and WH 35F No. CC9816-01 and CC 9816-07 Year of construction1998 Pressure Working pressure40 Bar Working pressure jacket13.8 Bar Main Features MaterialStainless steel Motor7.5 KW Surface1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Scraped surface heat exchangercheck Number of stages:2 Heating surface1,03m² Heating surface shell±0,28 Heating surface rotor±0,25m² Capacity 200kg/h Cylinder sizesDia: 152x600mm Max. temperature0-195°C With jacketcheck Rotor can be cooled/heatedcheck Max. temperature0-195°C InletDia: 50mm, 38mm OutletDia: 50mm, 38mm Motor1.1kW, 400/690volt, 1465rpm With post treatment cylindercheck Heating surface±0,5m² Cylinder sizesDia: 280x570mm Motor7,5kW, 400/690Volt, 1430rpm ...

General SKU354T1373 LocationBarneveld MakeSchroder Kombinator TypeVEMK 01/108-350 No.11/4053-1-182757 Year of construction2002 Main Features MaterialStainless steel Volume1.8 Ltr. Motor3 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4571 (316Ti) Scraped surface heatexchangers Mixercheck Capacity1,8Ltr. Information Total height1,7m Weight380kg CEcheck Floorspace1,7x0,65m Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser Scraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to  ...

General SKU232S114 LocationBarneveld MakeTerlet (NL) TypeMaxxitherm No.0410143 Year of construction2005 Pressure Working pressure5 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Motor1.1 KW Surface7.5 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4404 (316L) Scraped surface heat exchangercheck Number of stages:1 Heating surfaceca 7.5 m2 Heating surface shellinner wall ca. 3.5 m2 outher wall ca. 4 m2 Cylinder sizesouther wall dia. 560x2400mm (1x), inner wall dia. 500x2400mm (1x) Max. temperature-10/100 degr. C With jacketcheck Max. temperature153 degr. C InletDN80 OutletDN80 Motor1.1 kW 220-240/380-415 Volt Speed1,4 rpm Information Mounted on framecheck Mounted on wheelscheck Total height2.1 M Weight2100 Kg CEcheck Floorspace4.0x1.2 M Extra SpecificationsThe Maxxitherm brings about a continuous  ...

General SKU236N120 LocationBarneveld MakeAPV Nordic Unit Systems Silkeborg TypeHEXRT-672 No.27069952 Year of construction2001 Material Product contact materialStainless steel 1.4401 (316) Pressure Working pressure12 Bar Working pressure jacket8 Bar Main Features MaterialStainless steel Motor22 KW Surface0.84 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,84 m2 Cylinder sizesdia. 150x1850mm Max. temperature-35/149 Degr. C With jacket17 Ltr Max. temperature149 degr. C Inletdia. 60 mm Motor22,0 kW Speed252 rpm Information Mounted on framecheck Floorspace3,5x0,6 M Total height1,0 M Weight800 Kg Technical specs Extra informationcylinder size: dia. 150 x 1850 mm Scraped surface heat exchangersAPV ProductsHeat exchangers > Scraped surface heat exchangersBrand > APV Products What ...

General SKUR0081 LocationBarneveld MakeV.K.I. Schiedam bv (NL) Type3V SSHE Micro Votator / Schröder Kombinator No.V0910-94353-10A19191 Year of construction1995 Main Features MaterialStainless steel Motor7.5 KW Surface0.22 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchangerMicro Votator Number of stages:1 steam heated, 1 freon r-404a cooled, 1 water cooled/heated Heating surface0,246 (scraped surface) Heating surface shell0,229 m2 Capacity50 - 150 Kg/h Cylinder sizes(3x) dia.157mm x 500mm Max. temperature140 degr.C With jacketcheck Inletdia.30mm Outletdia.30mm Motor7,5 KW, 380/660 Volt Speed50- 500 rpm Information Mounted on framecheck With switchcheck With switchgearcheck Weight1500 KG CEcheck Floorspace1,9x1,4 M Total height2,5 M Extra SpecificationsWith Bitzer Kühlmaschinenbau GmbH Reciprocati ...

General SKU316S539 LocationBarneveld MakeAPV Products Type884 No.9150 Year of construction1995 Pressure Working pressure10.34 Bar Working pressure jacket10.34 Bar Main Features MaterialStainless steel Motor11 KW Surface2.7 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(2x) Number of stages:2 Heating surface2,7 m2 Cylinder sizesdia. ? x 2050 Max. temperature204 degr. C With jacketcheck Max. temperature204 degr. C Inletdia. 70 mm Outletdia. 70 mm Motor11 kW 380-400/660-690 Volt (2x) Speed207 rpm Information Mounted on framecheck Total height1,5 M Weight1900 Kg Floorspace3,7x1 MScraped surface heat exchangersAPV ProductsHeat exchangers > Scraped surface heat exchangersBrand > APV Products What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any d ...

General SKU316S529 LocationBarneveld MakeWaukesha Cherru-Burrell (US) TypeVotator II (6x48) No.A7149 Year of construction2004 Pressure Working pressure41.4 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor22 KW Surface3.36 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(4x) Number of stages:4 Heating surface3,36 m² Cylinder sizesdia. 370x1170 mm Max. temperature204/-29 °C With jacketcheck Inletdia. 71 mm Outletdia. 71 mm Motor18,5 kW 400/690 Volt (3x), 22 kW 400/690 Volt Speed232 rpm Information Mounted on framecheck Total height2,3 m Weight4000 kg Floorspace3,4x2,1 m Extra SpecificationsWith cooling system: 2,2 kW 380/415 Volt (4x) and Samson control valves (4x), type: 0277-02101.Scraped surface heat exchangersWaukeshaHeat exchangers > Scraped surface heat exchan ...

General SKUR0078 LocationBarneveld MakeTMCI Chemtech TypeCR 0327 No.WO 0327/01 Year of constructionunknown Main Features MaterialStainless steel Motor5.5 KW Surface0.1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Heating surface0,1 M2 Cylinder sizesdia 110 x 320mm Inletdia. 20mm Outletdia. 20mm Motor5,5 kW 380-415 Volt Information Total height1,4 M Weight260 Kg Floorspace1,0x0,6 MScraped surface heat exchangers-Heat exchangers > Scraped surface heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0087 LocationBarneveld MakeSchröder & Co Maschinenfabrik (D) TypeVWK 01/60-400 No.110705 Year of construction1989 Main Features MaterialStainless steel Motor2.2 KW Surface0.07 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Number of stages:1 Heating surface0.07 M2 Cylinder sizesdia.60x380mm With jacketcheck Inletdia. 25mm Outletdia. 25mm Motor2,2 kW 230 Volt With variable speed drivefrequency controller Information Mounted on wheelscheck With switchgearcheck Total height1,4 M Weight230 Kg Floorspace1,4x0,4 MScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

General SKU311P700 LocationBarneveld MakeSchröder&Co Maschinenfabrik (DE) No.23-232 Year of construction1984 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchangerCooler Number of stages:1 Cylinder sizes+/- dia.80mm x350mm Max. temperature-20 degr.C. Inletdia.25mm (product), dia.25mm (Glycol) Outletmissing Motor2,2 KW, 220/380 Volt With variable speed drivecheck With variable speed drivecheck Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,7 M Total height1,3 M Weight150 KG Technical specs Extra informationcylinder size: dia. 80 mm x 350 mmScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- ...

General SKU273P407 LocationBarneveld MakeDeutsche Vacuumapparate GmbH (DE) TypeM03B No.94006 Year of construction1994 Pressure Working pressure1 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Motor5 KW Surface3 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4571 (316Ti) Scraped surface heat exchangercheck Heating surface shell+/- 3,0 m2 Capacity500 Ltr Cylinder sizesdia.600mm x2300mm Max. temperature100 degr.C. With jacket(60 Ltr) Max. temperature-10 degr.C. Inletdia.55mm, dia.25mm Outletdia.55mm Motor5,0 KW, 400/690 Volt (Ex.) Speed71 rpm Information Floorspace1,2x1,1 M Total height3,0 M Weight840 KG Technical specs Extra informationcylinder size: dia. 600 mm x 2300 mmScraped surface heat exchangersDVA DeutscheHeat exchangers > Scraped surface heat exchangersBrand > DVA Deutsche What you can expec ...

General SKU020A140 LocationBarneveld MakeAlfa Laval TypeContherm 6x4 No.HC-288 Year of constructionunknown Main Features MaterialStainless steel Motor4 KW Surface0.4 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,37 M2 (4 Square Feet) Cylinder sizesdia. 152mm (6 Inch) With jacketcheck Motor4,0 KW, 380 Volt With variable speed drivecheck Information Mounted on framecheck Floorspace1,2x0,9 M Total height1,8 M Technical specs Extra informationcylinder size: 152 mmScraped surface heat exchangersAlfa LavalHeat exchangers > Scraped surface heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...

General SKU034G143 LocationBarneveld MakeAlfa Laval TypeContherm 6x3 No.HC-4844 NCC + HC-1802 NCC Year of construction1992 / 1982 Material Product contact materialStainless steel Pressure Working pressure20 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor7.5 KW Surface0.279 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,279 m2 each With jacketcheck Motor2x 7,5 KW, 415 Volt Speed177 Rpm Information Mounted on framecheck With switchcheck Floorspace1,3x1,0 M Total height2,0 M Technical specs Extra informationworking pressure 20 bar (300 PSI) / 31 bar (450 PSI): jacket working pressure 15,5 to 17,2 barScraped surface heat exchangersAlfa LavalHeat exchangers > Scraped surface heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machin ...

- For 800 x 1200 mm and 1000 x 1200 mm pallets - With large bottle table with 90° outlet - Machine in good condition - Machine available immediately - Videos available on request

Scraper chain conveyor WISSMATEC hot-dip galvanized

Description: belt width: 1500 mm Approx. Onsite Dimension. (l x w x h): 9,300 x 2,400 x 5,000 mm, weight approx.: 1 kg

Chip conveyors, scraper conveyors with coolant tank BMF type KF 200 K17 Ident. No: 0495078 Order No: 915979 Year of construction 1992 Metal link width 200 mm Distance between drive bars approx. 380 mm Length of possible chip removal 1100/2100 mm Insertion length approx. 1350 mm Insertion height 370 mm Insertion width 460 mm Hopper width at the top 400 mm Hopper width at the bottom 170 mm Conveyor height - ejection height approx. 1250 mm Motor power Belt drive 0.37 kW Mains connection 400 volts, 50 Hz - Drive of the scraper chain via geared motor coolant tank without coolant pump Space requirement L x W x H 3800 x 1300 x 1650 mm Weight chip conveyor approx. 500 kg good condition The conveyor is used for the transport of chips from a milling machine, lathe or machining centre.

Description: machine number: 6114.14 serial number: 260036616 T pressing pressure: 155 kN motor power: 4 kW Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 1,800 mm, weight approx.: 1,000 kg

APV/SPX scraped surface heat exchanger with 6 cylinders, type: HT 680 SSHE, 4 KPA centrifugal pumps, various valves and flow meters, total dimensions: 2900 mm x 1400 mm x 2900 mm.

Schröder Kombinator scraped surface heat exchangers with 2 cooling tubes, type: UTK18-200-DH-2A, building number: 120531, year of construction: 1991, refrigerant: Ammonia, total dimensions: 3500 mm x 2000 mm x 2300 mm.

guillotine shears, sheet metal shears DIGEP type OL 3 Fabr. No. 1312 Year of construction 1977 Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mm Cutting thickness at 450 N/mm² 3 mm single backgauge 500 mm Column projection 200 mm Cutting angle 2 Stroke rate at full cutting length max. 50 strokes/min. Working height 860 mm Motor power 2.2 kW Mains connection 380 volts, 50 Hz - LED cutting area lighting - simple backgauge with manual adjustment - Mechanical foot switch - Front angle stop left - 1 piece front sheet metal supports 300 mm Space requirement L x W x H 1660 x 1350 x 1200 mm Weight 1600 kg good condition; used

10′ x 3/4″ Cincinnati Mechanical Shear Material Width: 10′ Thickness: 3/4″ Serial # 6210 Model # 14611 Hardness: 300 Brinell 11 Hold-Downs Adjustable Entry Edge Guides

60″ x 10g Secrest Mechanical Shear Make: Secrest Machinery Material Width: 12″-60″ Maximum Thickness: .125″ Air Clutch & Brake Motor: 10HP AC

10′ x 3/8″ Cincinnati Mechanical Shear Material Length: 10′ Material Thickness: 3/8″ Front Guage Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 11 Electric Foot Pedal Digital Control Motor: 8HP AC

12′ x 1/4″ Cincinnati Mechanical Shear Material Length: 12′ Material Thickness: 1/4″ Model: 1812 Serial # 30782 Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 12 Electric Foot Pedal Digital Control Motor: 15HP AC

12′ x 3/8″ Pacific Hydraulic Shear Make: Pacific Serial # 1090 Model: 375R12 Maximum Width: 12′ Material Thickness: 14g – 3/8″ Knife Length: 144” Distance Between Housing: 12.5’ Electric Back Gage

12″ x .250″ Cincinnati Mechanical Shear Material Length:12′ Material Thickness: 1/4″ Model: 1812 / Serial # 33664 Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 12 Electric Foot Pedal Digital Control Motor: 12HPAC

Shearing Machine ROMEC C20-4 Cutting Length 2050 mm Thichness 4 mm . used machine in good working condition

CNC-controlled hydr. Sheet metal shearing machine make WEINBRENNER type TSV 6/3050Machine -No: 687 T built in 1987gr. Working width: 3050 mmFor sheets with 45 kg strength up to: 6.0 mmclear column width: 3160 mmclear stator projection: 200 mmCutting angle min./max .: 1/2 °Backgauge adjustment: 1000 mmNumber of hydr. Hold down: 12Number of strokes min./max. (depending on cutting length and material thickness): 22/36 / minHydraulic drive: 380 V, 15 kWTable height above hall: 900 mmDimensions incl. Backgauge, without frontSupport arms: 4100 x 2300 x 2100 mmWeight approx .: 8500 kgWith- Control in swivel control panel CYBELEC CNC 1000- compl. elec. Device with control device in the large switchingxa0Cabinet attached to the side of the machine- Backgauge control with programming- Material quality code- Sheet thickness preselection- stroke length adjustment- Contact cutting device- Scrapweed- ...

Hydr. CNC-Sheet metal Shear make GWF MENGELE type S 8 - 1500Machine -No: S2544, built in 1989Max. Cutting length: 1550 mmMax. Sheet thickness: 8 mmlateral. Discharge i. Stand: 50 mmSheet metal passage: 16 mmCutting angle adjustable: 2 ° 30 - 0,5 °Empty strokes: 25 - 32Number of hold-downs: 8Cutting pressure: 280 barHold-down pressure: 80 barOil filling: 300 lDrive power: 18.5 kWTotal connected load: 20.1 kWExternal dimensions: 2130 x 3260 x 2360 mmWeight: 5.8 tWith- CNC control SIEMENS S 5 for numerical sheet bending- Holding device mot- Sheet metal removal with conveyor belt- Cutting gap and cutting angle m. Control programmable- Spare knife- Schermesser for 750 kg strength- Separate hold-down z. Cutting after crack- Hold-down pressure adjustable and readable from the front- 2 rocker stops- Finger guard with recessed grip- balls in the support table- Angle stop m. Norius- Footswitchus ...

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

CNC sheet metal shears make EHT type TSS 4-20Fabr. -No: 107785, year of construction 1998Technical specifications:Working length: 2020 mmmax sheet thickness at 450 N / mm 4 mmOil volume: 160 lelectr. Connection: 400 V, 50 HzDrive line: 7.5 kWDimensions approx: 2800 x 2150 x 2150 mm, weight approx: 4.5 tWith- CNC control ELGO P 8721- Hold-up device- Scrap chute- foot switch- automatic cutting angle- automatic cutting gap adjustment- 3 angle stops in front- Cutting line lightingin a little used and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic CNC swing cut guillotine shears make KNUTH type KHT D 3006Year of construction 2018Technical specifications:Max. cutting length: 3100 mmMax. sheet thickness: 0.5 - 6.0 mmCutting angle: 1.3°Number of hold-down devices:16Stroke :105mmNumber of strokes per minute:15Working table height: 865 mmNumber of support arms:3Oil tank: 200LMotor power: 15 kWDimensions approx.: 4110 x 2200 x 2100 mmWeight approx.: 7300 kgwith- Sheet metal holding device- D-Touch 7 control with touch screen for motorized backgauge 1000 mm and intersection- foot switchlittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Sheet Metal Shear Make MENGELE Type S 4 - 5000/3Machine -No: S 2237 5000/3 Year 1976Cutting length: 5050 mmMax. Sheet thickness: 3.0 mmlateral. Discharge: 300 mmCutting angle: 0.6 °Strokes per minute: 34Number of hold-downs: 22mot. backgauge: 0 - 1000 mmlateral. Angle stop: 2000 mmOperating pressure: 230 barHold-down pressure: 58 barOil filling: 200 lDrive power: 11 kWOutside dimensions approx: 5750 x 2500 x 1700 mmWeight approx: 15 tWith- mot. backgauge- Angle stop front- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Sheat metal Shear make EHT type EHS 6-50Machine -No: 19782 Year 1983Max. Sheet thickness: 6.0 mmCutting length: 5050 mmKnife length: 5100 mmCutting angle: 1 - 15 °Knife strokes per minute: 18Number of hold-downs: 26Pressure p. Hold down: 60 barOperating pressure: 280 barOil filling: 220 lDrive power: 12 kWWeight approx: 11 tOutside dimensions approx: 5500 x 2900 x 2100 mmWith- mot. back gauge 1500 mm with length indicator- Cutting angle indicator- Cutting angle adjustment- Cutting length limit- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make LOTZE type TS 3000/5machine -No: 2623003 year 1975Technical specifications:Max. Effective length: 3040 mmMax. Sheet thickness steel: 5.0 mmMax. Sheet thickness stainless steel: 3.0 mmOutside dimensions approx: 3750 x 1255 x 1600 mmWith- motor backgauge with handwheel fine adjustment- Cutting length limit- Angle stop front- Table extension- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic swing cut guillotine shears make HERA type HSS 3Machine -No: 557 built in 1984heavy, unbreakable all-steel designTechnical specifications:Passage: 1100 mmLarge sheet thickness at 400 N / mm 2.0 mmThroat: 200 mmNumber of strokes: 56 H / minStop length at the front: 1000 mmStop length at the back: 1000 mmMotor power: 2.2 kWWeight about 1500 kgDimensionswith- motorized backgauge- foot switch- front support arms- hydr. Hold-downused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Swing cut sheet metal shears make RAS type 52.31Fabr. -No: 23/7, built in 2000Technical specifications:Cutting range up to: 3100 mmmax.sheet thickness: 2.0 mmNumber of strokes per minute: 37Cutting angle: 0.9 degreesDrive power: 3.0 kWExternal dimensions approx L x W x H: 3580 x 1700 x 1220 mmWeight approx .: 1950 kgwith- CE marking- Angle stop in front- 2 table extensions- foot switch- Single stroke - continuous run- Cut material switch via hand leverwithout back gaugeused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools