scm t 130 used for sale

Used sander SCM Sandya 5 mod. 5 RCS 110 useful working width mm 1100 I° tape: helical steel calibrator roller with height adjustment of the group II° belt: combined 60 sh sander roller unit and automatic buffer Nr.. 1 motor kw 11 flat positioner with pedals and height control nonium pneumatic belt centering new tow mat with two-speed motor

Key data: 1000 mm, 4 kW, 35 mm

SPECIFICATIONS: Workbench mm: 1000 x 1000 with 4-roller Europa drive with variator Installed capacity KW: 4.0 Diameter of spindle mm: 35 Tilting spindle shaft Max. vertical stroke mm: 210 Tilt: 0° - 45°

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

SECOND-HAND SPINDLE MOULDER WITH TILTING SHAFT SCM MOD. TI120 - CE RULES - tenonig carriage model TL - spindle shaft diam. 40 mm. - motor Hp 7,5 - year 2008

Key data: 2540 mm, 35 mm

SPECIFICATIONS: Table size mm: 2540 x 740 Spindle diameter mm: 35 Spindle inclination: 0°-45° Speed: 3000/10000 rpm Voltage: 3800 volts Equipped with: - Electronic programmer for spindle stroke and spindle inclination - 4-roller feed

THICKNESS PLANER type SAC SUERI RS 53 S second hand machine CE mark : Yes technical details : useful working width mm. 530 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed by inverter m / min. 4 ÷ 16 motorized table positioning with electronic reading n.4 knives "Tersa" main motor power Hp 5,5 volt. 380/50

With feed and vacuum pump

--------------------

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE

working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Planer width 630 mm chip removal 8 mm Planer shaft type Xylent spiral Main engine 7 kw HP HP 9,5 50 Hz Third pull-out roller min max planing height 3.5 mm - 300 mm

Planer SCM F520 Class Working width 520mm Electric planing height adjustment 4-knife shaft Traditional knives Sampler adjustable at an angle of 45 Worktop length 2990mm Extraction connection 115mm Motor power 4kw

noise-insulated table lips---------- Technical data ---------- planing width: 400 mm, table length: 2,600 mm, number of knives: 4 pieces ; TOP! Workshop-tested & immediately ready for use

Code: 0126 Brand: MINIMAX SCM Model: T 124 Wood-turning lathe with base for producing columns, furniture parts, etc., for wood, plastics, plaster, marble, etc. Technical data: Max distance between centres mm 1180 Centre height mm 210 Three-phase motor (V. 380) Hp 1,5 Spindle speed rpm 570/1000/1850/2500 Max working diameter mm 420 Rapid tailstock Easy speed change Holder table Suction hood diameter mm 100 Box with n° 5 gouges Overall dimensions mm 1800 x 600 x 1280 h Weight kg 125

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK

Key data: 520

SCM thickness planer S 52 Product name: Thickness planing machine Type: S52 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: Condition: Used Technical details: - Work table size: 520 x 850 mm - Working width: 520 mm - Chip removal max.: 8 mm - Passage height min.: 3 mm - maximum planing height: 230 mm - Knife shaft diameter: 120 mm - Planer shaft with 4 pieces of Tersa knife - Sectional pressure roller - Knife shaft speed: 4,500 rpm - Feed speed for thickness planing: 6 -10 - 13 - 17 m/min - Table lift motorized and fine adjustment by hand - numerical display of the table height - Deliverable pull-out roller in the thickness table - 2 Aigner mounting rails (1x input table, 1x output table) - Weight: 600 kg Engine data: - Voltage: 380 V - Current: 12 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,900 rpm The machine was completely refurbished  ...

Router with table widening Speed: 10,000 – 20,000 rpm. Table dimensions: 900 mm x 765 mm4. Engine 3 kW5. 380 V Dimensions: 900 mm x 1400 mm x 1600 mm Weight approx. 575 kg

Good day! I would like to offer you the following machine: 1 used swivel spindle table milling machine T 150 Class - Spindle inclination -10° to +45° - Spindle diameter 30 mm - Spindle quick-change device with pneumatic release device - 5 interchangeable spindles 30 mm with a stand - Motorized height and swivel adjustment of the milling spindle - 5 speeds up to 10000 rpm. - 5.5 KW 380 volt motor - Operating pressure of the pneumatics 6 bar - Swivel segment for milling fence - Aluminium stop jaws with insert strips for continuous workpiece support - Infinitely adjustable table insert instead of table rings Adjustable from the outside, for the largest possible workpiece support - Extraction hood under table with nozzles 120 mm - Bow milling guard (unused) with suction nozzle 120 mm - Clockwise/counterclockwise rotation - Socket for  ...

table dim. approx. 530x900 mm; throughput 5, 8, 12 and 18 meters/min.; maximum removal 8 mm (ATTENTION! Piping not included!)

heavy-duty thickness planer SCM S 520 Planing width 520 mm Planing height max. 250 mm Chip removal 3 - 8 mm Ribbed Steel Feed Roller Rubber pull-out roller 4-knife planer shaft, diameter 120 mm motorized height adjustment l mech. DIGITAL Feed rate 5 - 8 - 12 - 18 m/min. Machine is WORKSHOP OVERHAULED IN TOP CONDITION

SECOND-HAND COMBINED THICKNESSER - SURFACE PLANER SCM L'INVINCIBILE 500 MM.

Code: 0239 Brand: SCM Model: D/80 Automatic double end tenoner with 10-groups (5+5) for furniture, doors, window frames, panels, prefabricated panels, tables, cladding, prefabricated houses, fibre cement, plexiglass and various Technical data: Working length mm 3200 Min working length on 1 track mm 75 Min working length on 2 tracks mm 150 Working height mm 180 Adjustable feed speed from 5 to 30 mt/min Heavy cast-iron structure Rubber-coated tracks Track lubrication unit Composition: Automatic scoring unit - Motor Hp 1,5 Hogging unit - Motor Hp 8/12 Automatic Spindle moulder unit - Motor Hp 6,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 5,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 7,5/9 - Rpm 3000/6000 - Shaft diameter mm 40 Overall dimensions for transport: Machine mm 4800 x 2400 x 1700 h + Shoulders (tr ...

Code: 0245 Brand: SCM Model: D 80/K Automatic double end tenoner for wood, furniture, custom-made furniture, panels, doors, frames, composite materials and various Technical data: Working width mm 2500 Min working width on 1 track mm 75 Min working width on 2 tracks mm 250 Working height mm 180 Electronic variable feed speed from 3 to 18 mt/min Rubber-coated tracks Working width programmable with NC Composition: Automatic belt scoring unit applied to the direct drive unit - Rpm 5500 Hogging unit: Motor Hp 7,5 - Rpm 3000 - Suction mouth diameter mm 150 Automatic spindle moulder unit: Motor Hp 5,5/9 - Rpm 3000/6000 - Suction mouth diameter mm 120 Control panel Compressed air Bar 6 Overall dimensions mm 4100 x 2000 x 1550 h

Key data: 520 mm, 250 mm, 5 kW

Used comb. Dressing / Thickening Manufacturer: SCM Type FS 520 Built in 1998 4-Knife Wersa Shaft Planing width 520 mm Total length of dressing tables 2,300 mm Planing height 250 mm Inclination of the joint fence 90° to -45° Power 5.5 kW With engine brake Slotted table lips Weight 980 kg With pneum. Quick changeover system dressing -> thickness -> dressing Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarante ...

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Description: TECHNICAL FEATURES: Useful working dimensions X: , ,min 250 – max 3,000 mm Useful working dimensions Y: min 100 – max 920 mm Piece passage: min 12 – max 60 mm COMPOSED BY: 6 top vertical drilling units with numerical control positioning, each complete with 2 chucks with 26 independent vertical spindles 6 lower vertical drilling units with numerical control positioning, each complete with 2 chucks with 26 independent vertical spindles 2 numerically controlled horizontal drilling units each complete with 2 chucks with 21 independent spindles 6 electronically positioned pressure units Fixed side panels and photocell barriers serial number: ALL/076/03, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 20,000 kg

Swivel spindle milling machine SCM Samco Type T 40 I Machine No. KK/038438 Year of construction 1997 Includes 3 rollers of feed Includes table extension Swivel cutter head included Spindle diameter 30 mm Spindle swivel 90° - 45° Motor power 3 kW Engine Brake Spindle left clockwise Table size 870 mm x 560 mm Spindle clamping length 135 mm Maximum tool diameter 180 mm Suction nozzle diameter 120 mm Speed 1400/3500/6000/8000 rpm. Weight with feed approx. 250 kg

Key data: 630 mm, 240 mm, 7 kW

SPECIFICATIONS: Max. machining width mm: 630 Max. working height mm: 240 Installed power: 7.5 KW Feed speed: 6-18 m/min Roller with 4 blades Voltage: 380 volts Manual operation

SCM Flush-Thickness Planer Model L' Invincibile 2150: - 400mm planer, table length 2150mm - thicknessing planer, manual table lifting Machine not according to CE standards, for export

Description: serial number: AB/128460 Technical specifications: Dimensions for pieces to process minimumum squaring: : length 30 mm, width 50 mm maximumum squaring: : length 3200 mm, width 3200 mm saw angle adjustment 0 - 45° minimumum for cutting with paralel guide: 10 mm maximumum for cutting with paralel guide: 1270 mm minimumum height: 3 mm maximumum height: 100 mm with saw blade 315 mm diameter, at 90° maximumum height: 70 mm with saw blade 315 mm diameter, at 45° minimumum / maximumum diameter saw blade: 250 / 315 mm (inner diameter 30 mm) vitesse de rotation saw blade: 4000 rpm scoring blade diameter: 120 (inner diameter 20 mm) vitesse de rotation scoring blade: 8000 rpm fixed table dimensions: 900 x 550 mm mobile table dimensions: 3200 x 360 mm Approx. Onsite Dimension. (l x w x h): 5,200 x 2,400 x 1,700 mm, weight approx.: 770 kg

SCM machining center model RECORD 130TV: - axis travel X=4330 - Y=1720 - Z=300mm - useful working range 3830 x 1245mm - piece passage 280mm - worktop with 6 TV bars - laser for positioning aid - supplied with 12 suction cups and 12 clamps for TV bars - 3 loading aids - rubbish drain mat - 100 mc/h vacuum pump - automatic lubrication - optimized and centralized suction - electronic control with PC-OFFICE, in Windows system and XILOG PLUS interface - dimensions installed with protections mt 8,4 x 5,9 Operator groups: - vertical spindle type POWER2000 liquid cooled, motor KW 11 with inverter, HSK63F connection, with 4th vector rotating axis, served by: Dual RAPID tool changer at 12 + 12 positions rear tool room with 12 + 12 positions - UNIVERSAL K horizontal milling unit with 2 outputs (tip + blade), adjustable 0-90° , KW 3 motor Machine according to CE standards No ...

Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001

equipped with EUROPA 340 feeder; including shims

Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible.

Key data: 1320 mm, 2 , 150 mm

SPECIFICATIONS: Max. grinding width mm: 1320 Max. machining thickness mm: 150 Sanding belt size mm: 2150 x 1150 Installed capacity KW: 15.0 (1 motor + 1 drive) Configuration: I. Group: 1 roller II. Group: 1 roller-shoe combination

THICKNESS PLANER type SCM S 52 SURFACE PLANER type SCM F 410 SPINDLE MOULDER type SCM T 130 NOT SEPARATE SALE second hand machines

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

Facilities: - Aigner Integral Stop - Feed apparatus (3 rolls) - manual foot brake - Height adjustment by hand wheel - Aigner table extension

Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front

Spindle moulder SCM model T130N: – 1200 x 730 mm worktop – FAST sector plan, instead of rings – shaft D=35mm – Motor power kw 5,5 / HP 7,5, volt 380 – 5 shaft rotation speeds: 3000/4500/6000/7000/10000 rpm – adjustable spindle moulder cap – complete with 3-wheel driver Machine according to CE regulations

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

Spindle tenoning machine SCM T130 Motor power 7,5kw Machine control from puplite Electric spindle setting Sidecar for trunnion Total spindle height 200mm Spindle diameter 40mm Variable rotation on the belt Spindle speed 3000/4500/6000/7000/10000rpm CE Certificate Extraction nozzles 2x120mm

SCM Topset XL planing and molding machine for four-sided planing and profiling of wood with CNC-controlled spindles and SCM T-Set quick release nuts., working width: 240 mm, working height: 120 mm, spindles: 7, spindle 1: Bottom / 7.5 kW / 8,300 rpm, spindle 2: Right / 11 kW / 8,300 rpm, spindle 3: Left / 11 kW / 8,300 rpm / CNC, spindle 4: Right / 11 kW / 8,300 rpm / CNC/, spindle 5: Top / 11 kW / 8,300 rpm / CNC, spindle 6: Below / 7.5 kW / 8,300 rpm / CNC), spindle 7: Universal / 7.5 kW / 8,300 rpm, feed: 5,5 kW, control: Control 100 PC Plus, table rollers: Driven table roller in the outlet, spindle diameter: 40 mm

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Spindle swivel: No; Sliding carriage: Yes; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Height indicator: Scala; Swivel angle indicator: -; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 9000; Motor power: 5 kW; Engine braking: Yes, automatic; Suction connection: 2 x 120mm; Machine length: 1200mm; Machine depth: 900mm; Weight: 600kg;