scheer granulator used for sale

pneumatically max. cut length 3,000 mms - saw sheet Diameter 180 mms dimensions 3600 x 700 x H 1,400 mms weight 400 kg (changes and mistakes in the technical data, information and prices as well as intersales reserve!)

Scheer FM2-3000 Scheer veneer saw 3000 mm G-2521-M3DVZ No VAT! Special price: 770,-

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

See photos

Automatic copying device: x ja/nein converter: x ja/nein turning speeds: 11000 U/min Number of knives: NA z= Diameter: NA mm Length: mm Shank diameter: mm Motor output: kW Dimensions (L/W/H): mm Vertikal stroke: mm Table dimensions: mm Dust suction hood: mm Diameter of the saw arbor: mm Length of the rolling table: mm Sawblade tiltable: ° milling stroke vertical: mm total power requirement: kw Weight: kg Spindle diameter: mm Length of the planing table: mm Number of heads vertical: St. Number of heads horizontal: St. Number of milling agregates: St. Number of knives: St. Number of sanding units: st. Number of spindles: St. Number of spindle head vertical: St. Number of spindles head horizontal: St. Number of milling spindles: St. : St. Number of tools: St. Working width: mm Year: Speed of boring spindles: U/min. Required air-pressure: bar Dowel insertingunits: St. Electrical height adj ...

Granulator Abrasion : 1,1 KW Operating voltage : 3~380 V, 50 Hz, 220 V, 1.6 A; Rotor speed : 100 - 1150 rpm Rotor diameter : 120 mm Rotor width : 50 mm Number of teeth : 20; --> 2 identical machines in stock.

Joining and fine cutting machine / veneer saw make SCHEER type FM 8/3100Machine -No: 72824Technical specifications:Cutting length: 3100 mmCutting height: 45 mmSaw blade diameter: 180 mmFeed: manualPower requirement: 1.8 kWDimensions: 3950 x 470 x 920 mmWeight approx: 400 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cutting length: 3000mm.

Foot operation., Engine: 1.1 kW // 2,700 rpm.

Number of boring spindles: 21 St. Boring depth max.: 80 mm Motor output: 2,2 kW Weight: 420 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Veneer saw Scheer Type: FM 5-3000 Cutting length 3000 mm Saw motor approx. 1.85 kW Pneumatic pressure beam Maximum insertion height 70 mm Saw blade diameter maximum 180 mm Maximum cutting height approx. 45 mm Support table at the back Weight approx. 450 kg Dimensions: 3600 mm x 1000 mm x H 1300 mm

Manufacturer: Scheer Funiersäge, Cutting lenght mm: 2800, Working hight mm: ca.30, Main engine kW: ca.1,5, Pressure beam: yes,

Manufacturer: Scheer, Year: 2003, Program: yes, Type: PA 6000, Plattenformat max mm: 4200 x 3200, Working hight mm: 80, Length to slide in mm: 4200, Saw Blade Diameter mm: 350, Number of clamping tools: 7, Main engine kW: 9, Feeding speed max m/min: 70, Feeding speed continous adjustable: yes, Scoring Aggregate : yes, Compressed air bar: 6, Year :2003

Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,

Manufacturer: Scheer, Type: DB 10, Control: Hand, Drilling beam swivel-mounted: yes, Number of drill spindles: 3, Working length mm: 2200, Lochraster: 22,5, Drilling engine kW: 0,75, Working range max mm: 65, Work piece clamping: pneumatisch, Work stations: 2, Wight approx. kg: 400,

Veneer saw, veneer saw, joint cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with suction

Quills, processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. Feed: stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill machining units available -Price: per piece -Weight: 25 kg/piece

Router, router, hand router, edge router -Manufacturer: Scheer, hand router type HM 6 -Speed: 18000 rpm - Depth stop -Rated consumption: 650 watts - Connection: 220 volts -built-in collet: Ø 6 mm -Dimension: 460/190/H230 mm -Weight: 4.1kg

Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm -Weight: 24 kg

Stair stringer milling machine, router, groove milling machine, stair stringer milling machine -2x stair stringer milling devices -hardened guide shafts -complete stop system -Max. Intermediate dimensions: 1550 mm -Table dimensions: 4000 x 1900 mm -Table height: 770 mm -Spindle motors: 1.1 kW 2780 rpm -Spindle stroke: 60 mm -Transport dimensions: 2000/800/H800 mm -Weight: approx. 250 kg

Fabr: Scheer Type: BS 5102 Power: 3.5kW Working width: 1500mm

Machine double-sided row drilling machine 2 drill motors 1.8 kW with oil brake cylinder Stroke max. 130 mm with pneumatic reversing valve 21 spindles, spindle pitch 32 mm Drilling distance max. 640 mm (by moving the Bkhqffww workpiece max. 2656 mm) Portal passage 850 mm Air verbatcu at 5 atm approx. 11 l per cycle Suction nozzle 160 mm Machine dimensions approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short-term Location: 97478 Hainert

Hand Plane MH75 SCHEER Planing width 75mm Motor: 230V 5.5A 1100W 10000 U/1 Planed sole length 500mm 2 knife shaft D= 60mm reversible knife

SPECIFICATIONS: Max. cutting length mm: 3100 Pneumatic workpiece stop Voltage: 380 volts Hand-operated saw carriage

General SKU063S235 LocationBarneveld MakeScheer & Cie TypeHSG400 No.21057927 Year of construction1990 Main Features Motor22 KW Inlet diameter200 mm Width400 mm Specified Features - Pelletiser Motor22 KW, 380/660 Volt Information Mounted on framecheck Mounted on wheelscheck Floorspace1,0x1,6 M Total height1,7 M Weight1200 KGPelletisersScheer & CieMills > PelletisersBrand > Scheer & Cie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

SCHEER saw fully functional, the entire control cabinet is invested, practically new, reliable, can be cut 5 panels at a time

Hole rowing machine DB 3 - 25 drill bits pitch 32 mm

Cutting length: 3100 mm Cutting height: 45 mm Motor output: 1,8 kW Dimensions (L/W/H): 3950 x 470 x 920 mm machine weight ab.: 400 kg Scheer joining and fine cutting machine FM-8 3100mm with rear support table ------------------------- (technical data according to manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Machining Center Scheer Type: BC 2001 Year of construction: 2000 Axle travel: X 3500 mm, Y 1500 mm, Z 220 mm Axis speeds: X 80 m/min., Y 60 m/min., Z 30 m/min. Work table size: 3200 x 1200 mm Minimum part size: 250 mm x 70 mm x 10 mm Max. part size: 3200 mm x 1250 mm x 70 mm In pendulum mode: 800 mm x 1250 mm complete machining 1000 mm x 1250 mm surface processing Vacuum pump 2 x 40 m³/h Vacuum cups 12 pieces 120 x 120, 2 pieces 120 x 65 mm Drilling unit: L-shape, 13 individually controllable spindles, 7 in X-direction, 6 in Y-direction, 32 mm wheelbase, Extension stroke 70 mm, pneumatic Scheer male thread M 10 re+li, 1.5 kW / 6000 rpm Milling unit power 7.5 kW at 12000 to 18000 rpm, Speed 1000 rpm to 20000 rpm electr.adjustable Right-left rotation Hollow shank taper DIN 69893-HSK F63 Tool magazine on the move with 18 places Distance in magazine 88 mm Max.  ...

Description: veneer cutter made in Germany after pneumatic fixation cut up to 3000 mm veneer length Approx. Onsite Dimension. (l x w x h): 3,750 x 100 x 1,200 mm, weight approx.: 300 kg

cutting length: 3050mm; workpeace clamping: Handrad; suction connection: yes;

Out of stock, we offer spare parts for McIntyre alligator scissors. Main wearing parts such as blades for JMC 150, JMC 200B, JMC 320; JMC 407, JMC 500, JMC 600, JMC 640, JMC 900. In addition you will find control blocks, hoists, foot control, springs, screws for the knife sets, adjusting screws on the knife sets, adjusting screw cutter with brass wear plate, electric box next to other parts always in stock. Inquire. We help in the short term. Also express shipping possible. By phone at 02824/4193

Recycling machine trade AGICOM-Pedergnana OG: Granulator PM1840 used and ready for use. A powerful single-shaft shredder/pre-shredder for electrical cables. Throughput: 250 - 300kg/h (electric cable)

Granulator/granulator directly from stock available! Can be used in the cable processing and cable recycling, Kunstoffzerkleinerung and destruction of plastic and plastic parts Granulator/Schneidmühle type: RMH 16/22 VGA _ 4 KW drive power (further data see table) other granulator/granulator on request) RMH 16/22 VGA/power: 4 KW RMH granulator features: -In the RMH granulator RMH, a knife set is installed. -A sieve is fitted (drill holes on request.). -The following filter inserts are available standard production: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm -V cutting geometry â Lenze electric motor / Schneider Electric box and breaker -Slight tilt of the filler funnel -Available with wheels/2 x fixed castors/2 x brake castors or adjustable rubber-mounted feet -With various trays available 1) Insert as box, here the material out of the box out can be tilted (2) slide ...

General SKU277U496 LocationBarneveld MakeGericke Type450x800 MK2 NIBBLER No.NB248002 Year of construction1998 Main Features MaterialStainless steel Motor9 KW Width450 mm Specified Features - Sieve granulator Granulating sievecheck Sieve sizes450x800 mm Sieve perforation2 mm Inlet800x450 mm Outlet800x450 mm Motor7,5/9 kW 380-415/440-480 Volt Speed64 rpm MaterialAluminium, Mild steel, Stainless steel 1.4301 (304) Information Total height0,62 m Weight550 kg Floor space2x0,75 m Extra SpecificationsCap. approx. 30,000 L/h (product-dependent)Sieve granulatorsGerickeSieves > Sieve granulatorsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many  ...

General SKU315U727 LocationBarneveld MakeSklenar TypeDKS-250 A No.20-18-025/21-0100000-00 Year of construction2018 Main Features MaterialStainless steel Motor2.2 KW Width300 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Sieve sizes350 mm Sieve perforation5 mm With hopper515x480 mm Inlet490x330 mm OutletDia. 300mm Motor2,2 kW, 230/400 volt With extra sieves3x 2-10 mm MaterialStainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight250 kg CEcheck Floor space0,79x1,19 m Total height1,4 mSieve granulatorsSklenarSieves > Sieve granulatorsBrand > Sklenar What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

General SKU354T996 LocationBarneveld MakeArtech TypeTR-410 No.416027.001 Year of construction2004 Main Features MaterialStainless steel Motor7.5 KW Width400 mm Specified Features - Sieve granulator Granulating sievecheck Gratercheck Rotor sizesDia. 390x390 mm Sieve sizesDia. 400x400 mm Sieve perforation1,9 mm Inletdia. 163 mm Outlet890x450 mm Motor7,5 kW, 400 volt Speed750 rpm MaterialStainless steel 1.4401 (316) Information Mounted on stainl. st. framecheck Total height1,8 m Weight650 kg CEcheck Floor space1,5x1,0 mSieve granulatorsArtechSieves > Sieve granulatorsBrand > Artech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU213T1392 LocationBarneveld MakeRubitec AG TypeVMT 200 No.071080 Year of construction2007 Main Features MaterialStainless steel Motor4 KW Width190 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia: 190x100 mm Sieve sizesDia:260x130 mm Sieve perforationDia: 5 mm OutletDia: 300 mm Motor4kW,220-240/380-415Volt, 2905rpm(EX) Speed100-1000 U/min MaterialStainless steel 1.4435 (316L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck Total height0,88 m Weight230kg Floor space1,0x0,60 m ATEX compatiblecheck Extra SpecificationsAtex II3GSieve granulatorsRubitecSieves > Sieve granulatorsBrand > Rubitec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...

General SKUR1045 LocationBarneveld MakeBohle TypeBTS No.0007792009 / 71374 Year of construction2000 Main Features MaterialStainless steel Width310 mm Specified Features - Sieve granulator Conical granulating sievecheck Sieve perforation1 mm With hoppercheck Inletdia. 310 mm Outletdia. 260 mm Motorcheck Speed± 150-3000 rpm MaterialStainless steel 1.4401 (316) Information Total height0,6 m Weight180 kg Floor space1,3x0,56 m Extra SpecificationsWITH NEW ROTORSieve granulatorsBohleSieves > Sieve granulatorsBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU334U822 LocationBarneveld MakeGericke TypeNBS 200/200 No.2023 Year of construction1994 Main Features MaterialStainless steel Motor1.1 KW Width180 mm Specified Features - Sieve granulator Gratercheck Rotor sizesDia: 180x200 Sieve sizesDia: 200x200 Sieve perforation3mm Inlet200x200mm Outlet200x200mm Motor1,1kW, 220/380Volt, 920rpm. Speed920 rpm Sieve granulators Rotating sievecheck Sieve sizesDia: 200x200 Outlet200x200mm With inspection hatchcheck Speed920 rpm With sieve cagecheck MaterialStainless steel 1.4552 Information Total height0,30 m Weight100kg Floor space0,75x0,32 mSieve granulatorsGerickeSieves > Sieve granulatorsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU300U595 LocationBarneveld MakeGlatt GmbH TypeOR 50-30 No.D 01474 Year of construction1999 Main Features MaterialStainless steel Motor1.1 KW Width500 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesDia: 115x490mm Sieve sizes125x500mm With hoppercheck InletDia:200mm OutletDN250 Motor1.1kW, 400Volt, 2820rpm (ex) With variable speed drivecheck Speed51-293rpm MaterialStainless steel 1.4571 (316Ti) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight520kg CEcheck Floor space1,8x1,2m Total height1,39-2,45m ATEX compatiblecheckSieve granulatorsGlattSieves > Sieve granulatorsBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...

General SKU300U593 LocationBarneveld MakeFrewitt TypeTC-150 No.1201034 Year of construction2001 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Sieve granulator Granulating sievecheck Gratercheck Conical granulating sievecheck Rotor sizesdia. 100x50 mm Sieve sizesdia. 120x55 mm Sieve perforation0,8 mm With hoppercheck Inletdia. 250 mm Outletdia. 100 mm Motor2,2 kW 380-420/220-240 Volt With variable speed drivecheck Speed300-4000 rpm With extra sieves1,5 mm (grater), 1,5 mm, 2 mm, 3 mm MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight200 kg Floor space0,7x1,1 m Total height1,6 mSieve granulatorsFrewitt FribourgSieves > Sieve granulatorsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At ...

General SKU300U600 LocationBarneveld MakeStephan TypeKG 150 P No.B 715.817 Year of construction1989 Main Features MaterialStainless steel Motor1.8 KW Specified Features - Sieve granulator MaterialStainless steel 1.4016, Stainless steel 1.4301 (304) Granulating sievecheck Gratercheck Rotor sizesdia. 175x135 mm Sieve sizesdia. 178x145 mm Sieve perforation0,6 mm With hoppercheck Inletdia. 100 mm Outletdia. 300 mm Motor1,8 kW 380 Volt With variable speed drivecheck Speedmax. 284 rpm With extra sieves0,8 mm , 2 mm (2x),3 mm (2x), 4,2 mm Information Mounted on wheelscheck With switchcheckSieve granulatorsStephanSieves > Sieve granulatorsBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...

General SKU354T983 LocationBarneveld MakeWuxi Intech Typeunknown, missing typeplate Main Features MaterialStainless steel Motor7.5 KW Width140 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesdia. 140x360 mm (2x) Sieve sizesdia. 140x415 mm (2x) Sieve perforation1,5 mm With hoppercheck Inlet560x400 mm Outlet450x460 mm Motor7,5 kW 380/660 Volt MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck With switchcheck Floor space1,5x0,7 m Total height1,3 m Weight800 kgSieve granulatorsWuxi Intech MachinerySieves > Sieve granulatorsBrand > Wuxi Intech Machinery What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...

General SKU354T987 LocationBarneveld MakeArtech GmbH TypeARTOFEX TR-210 No.416026.006 Year of construction10-2002 Main Features MaterialStainless steel Motor3 KW Width245 mm Specified Features - Sieve granulator Gratercheck Rotor sizesDia: 245x245mm Sieve sizesDia: 250x245mm Sieve perforationDia: 1,2mm InletDia: 115mm Outlet890x300mm Motor3kW, 380-420/660-720Volt, 1420 rpm Speed688 rpm With extra sievescheck1 piece, 1,2mm MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Information Mounted on stainl. st. framecheck With switchcheck With switchgearcheck(as is) Weight410kg CEcheck Floor space1,35x1m Total height1,8mSieve granulatorsArtechSieves > Sieve granulatorsBrand > Artech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

General SKU354T1382 LocationBarneveld MakeFrewitt TypeMG-205 No.058551366 Year of constructionunknown Main Features MaterialStainless steel Motor0.75 KW Width450 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesDia: 120x450mm Sieve sizes200x490mm Inlet490x350mm Outlet300x100mm Motor0,75kW, 220/380Volt, 1395RPM (EX) With variable speed drivecheck Stöber, R27-1055-075-4 Speed47-330rpm MaterialStainless steel 1.4305 (303) Information Mounted on stainl. st. framecheck With switchcheck(as is) Weight200kg Floor space0,95x0,7m Total height1,1m ATEX compatiblecheck Extra Specificationsthis machine does not contain a sieve Sieve granulatorsFrewitt FribourgSieves > Sieve granulatorsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any dest ...

General SKU244U283 LocationBarneveld MakeAlpine TypeRO 28/40 No.3540/1 Year of construction1987 Main Features Motor15 KW Specified Features - Granulator MaterialSilicon steel 1.5023 Granulatorcheck Rotor width390 mm Rotor diameter300 mm Open rotorcheck Number of rotor knives3 Number of stator knives:2 Without hoppercheck Inlet410x285 mm Motor15 kW 380/660 Volt Rotor speed± 915 rpm Information Mounted on framecheck With switchcheck (as is) Weight650 kg Floorspace1,3x0,8 m Total height1,5 mGranulatorsAlpineMills > GranulatorsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!