saw auto used for sale

cutting width: 375 mm Cutting height: 150 mm dimensions of saw-blade: 500 x 30 mm Motor output: 2 x 3 kW Cutting length: 5100 mm speeds: 2800 U/min air pressure: 6 bar weight of the machine ca.: 700 kg dimensions of the machine ca.: 6100 x 1450 x 1450 mm Profile support plate made of steel Stable cast construction of the saw unit Large cutting range, 2 profiles can be cut at the same time Easy adjustment of the moving unit with roller guides Double storage of the swivel device Safe clamping thanks to the two-pressure system Double saw feed guide Hydropneumatic saw feed External dimension correction scale Left saw unit fixed Swivel range 45°-90° Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 500 mm throat: 1050 / 485 mm workpiece height: 300 mm saw band length: 3920 - 4050 mm cutting speed: 15 - 940 m/min table height: 1040 mm table surface area: 750 x 800 mm Table tiltable: 15 Grad total power requirement: 4,0 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made  ...

cutting width: 280 mm Cutting height: 150 mm Motor output: 2 x 4,0 kW saw blade: 420 x 30 mm Cutting length: 6000 mm speeds: 2800 U/min air pressure: 7 bar weight of the machine ca.: 1750 kg dimensions of the machine ca.: 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic circular saw Type: CM 601 Manufacturer: Adige Year: 2014 Control: Siemens Hours: 14611 Pipe diameter range: 10–102 mm Square profile: up to 70 × 70 mm Aluminum profile: 90 × 90 mm Cut length: up to 800 mm Step feeder 6500 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Cutting capacity: 4300 mm x 4300 mm. Sawblade height: 125 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 1-150 m/min. Returnspeed 150 m/min. Programm fence speed: 90 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1075/1825/2625/3425 mm. Machine control: CADmatic 4 ? Professional Hardware: Windows XP (US) TFT display Software showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.

cutting diameter: 15 - 560 mm : 560 x 630 mm dimensions of saw-band: 7.400 x 54 x 1,60 mm Control: KASTO material feed - single: 900 mm multiple feeding length: max. 9.999 mm cutting length min.: 6,00 mm sawing motor: 5,50 kW cutting speed: 13 - 127 m/min height of material-table: 700 mm total power requirement: 12,00 kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control, frequency-controlled saw band drive, chip conveyor, infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m, Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Behringer HBP 263 AG Metallbandsäge Vollautomat (2008) Hersteller: Behringer Typ: HBP 263 AG Metallbandsäge Vollautomat Baujahr: 2008

cutting diameter: 15 - 300 mm saw band length: 4640 mm cutting width: 1,3 mm cutting range - square -: 300 x 300 mm feed length: 600 mm feed length: multiple: 5400 mm dimensions of saw-band: 4640 x 41 x 1,3 mm cutting speed: 19 - 130 m/min min. cut-off length: 10 mm height of material-table: 700 mm total power requirement: 7 kW weight of the machine ca.: 2,7 t dimensions of machine L x W x H: 2,35 x 2,34 x 1,95 m Accessories: chip conveyor, DRO for cutting length, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEBA Mebamat 434 Metallbandsägeautomat Hersteller: Meba Typ: Mebamat 434 Baujahr 2013 Zustand: gut, gebraucht Einschaltstunden: 14.800h Sägestunden: 5682h Ausführung NC-Automat Motor 7,5 kW Sägeband 6220 x 41 x 1,3 mm Bandgeschwindigkeit 15 ? 150 m/min. Max. Materialdurchlass Ø 430 / 430 x 430 Kleinster Ø 5 mm Abmessungen (L x B x H) 1700 x 3100 x 2350 mm Arbeitshöhe 750 mm Gewicht 4100 kg Nullanschlag Kratzspäneförderer Minimalmengenschmierung Automatische Materialhöhen- und Breitenerkennung Rollenbahn 300cm 8x neue Ersatzsägebänder

Kaltenbach KBS 400 NA Metallbandsäge Automat (2020) Hersteller: Kaltenbach Typ: KBS 400 NA Baujahr: 2020 Zustand: gebraucht, sehr gut, unter Strom Sägeband (mm) 5.730 x 41 x 1,3 mm Motorleistung (kW) 4 Schnittgeschwindigkeit (mm/min) 15-90 Sägeblattvorschub (m/min) 0-300 Schwenkbereich 115° Rund 90° 350 mm Rund 45° 350 mm Vierkant 90° 400×;350 mm Vierkant 45° 315×;350 mm Arbeitshöhe 720 mm Gewicht 3600 Kg CNC-gesteuerte Schnittwinkeleinstellung Separat angetriebene Spänebürste Automatischer Materialnachschubgreifer mit Hublänge 2.600 mm im Einfachhub Hydraulische Bandspannung Elektronische Sägeband-Schlupfüberwachung

CONTROLS   CNC controls KASTO TECHNICAL SPECIFICATION   max. cutting height: 430 mm   sawband length: 6830 mm   sawband width: 1.3 mm   chucking capacity min: 6 mm   clamping diameter max.: 430 mm ELECTRICAL SPECIFICATIONS   total power consumption: 22 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 4750 mm   total height: 2602 mm   total weight approx.: 4500 kg Precision, hydraulic, high-performance, with roller conveyor Ausstattung: Rollenbahn mit Quertransport am Eingang der Anlage und Förderband mit Abschiebetisch am Ausgang der Anlage

\" Technical details Manufacturer: COSMEC S.r.l. Model: SM 400 Type: Automatic multi-blade rip saw Year: 2002 Serial number: M3472 Supply voltage: 380 V Frequency: 50 Hz Total installed power: 40 kW Main motor: - 37 kW - 2940 rpm - 400/690 V - IP55 Configuration: - Automatic chain-feed system - Siemens inverter - Multi-blade circular saw arrangement - Dust extraction system - CE certified construction Blade diameter: 300–400 mm Maximum cutting height: 128 mm Maximum passage width: 650 mm Conveyor width: 400 mm Feed speed: 4–12 m/min or 8–24 m/min Arbor speed: 3400 rpm Dust extraction connection: Ø70 mm Manuals: Included Application: - Longitudinal timber cutting - Multi-blade ripping operations - High-production woodworking applications Dimensions: - Length: Approx. 7000 mm - Width: Approx. 1800 mm - Height: Approx. 2200 mm Weight: 2800 kg Cond ...

Serial number: 313026 Saw blade diameter: 450 mm incl. roller conveyors Operating voltage: 3 x 400 V Frequency: 50 Hz Reference: Steinbach & Holler - Lot 28 Auction-ID: A7-49882-128

Machine number: 232597 Operating voltage: 400 V Nominal current: 32 A Belt length: 5080 mm Control: SIEMENS SIMATIC HMI Material support height: 1200 mm Roller diameter: 630 mm Projection: 370 mm Maximum cutting height: 320 mm Guide rod (hydraulic stroke): 200 mm Belt tension (hydraulic stroke): 60 mm Sawing parameters - Belt speed: 250 - 2000 m/min incl. roller conveyor width: 350 mm Reference: Heraeus Auction-ID: A7-49882-162

Key data: 235 mm, 2710 mm, 1 mm

Automatic horizontal band sw machine. Included roler material feeder. Cooling system Manual shoulder moving Manual material tightening Material stopper Speed 40-80 m/min 400V/50Hz/1.45kW

Controllo touch KASTO BASIC CONTROL Auction-ID: A7-50204-18

Saw unit, sawing unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit cutting depth 60 mm -Saw blade: Ø 250 mm -Engine: Fimec H71SE -Power: 3 kW -Speed: 2800 rpm -Transport dimensions: 455/455/H420 mm -Weight: 27 kg

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2

Vertical band saw HESKA type ESA 4Fabr. No. 681174 year of construction approx. 1985Roller diameter 420 mmThroat depth 400 mmTable size 500 x 500 mmCutting height 285 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed Gear stage (1) 15-140 m/min. Saw blade speed gear stage (2) 150-1400 m/min. Motor power 1.5 kWNet connection 380 volts, 50 Hz - stepless saw blade speed via PIV gearbox with handwheel adjustment and 2 gear steps - saw table swivel in 2 axes -

Vertical band saw JAESPA type MSU 4Fabr. No. 724749 year of construction approx. 1980Roller diameter 420 mmProjection 400 mmTable size 610 x 610 mmCutting height 260 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed 10-1500 m/min. infinitely variableMains connection 400 volts, 50 Hz- infinitely variable saw blade speed via 2 gear stages and infinitely variable via belt drive- Saw table swivel- Saw blade butt welding machine IDEAL BS0-16- Saw blade shear- Sharpening stone for grinding the weld seamSpace requirement L x W

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

For e.g. Festool plunge saw, Detail: 1 x 160 x 2.2 x 22 mm. - 24 teeth, 1 x 160 x 2.2 x 22 mm. - 36 teeth, 1 x 160 x 2.2 x 22 mm. - 48 teeth. Circular saw blades set 3 -piece 160mm for e.g. festool plunge saw Auction-ID: A1-40897-77

Controls a wide variety of pressure set points during tangential flow filtration processes when in use THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-108

Low-voltage oscillating plaster saw, specially designed for removing casts in hospitals and clinics Auction-ID: A1-49756-221

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Yours sincerely Trade ...

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Flaring system for sewage gas combustion - Mint- Manufacturer: Haase Maximum flow rate: 10 m³/h Gas pressure: 15-50 mbar Material: Stainless steel (V4A) Diameter: 150 mm Total height: 4.500 mm Emissions: CO2 and NOx to TA-Luft in the range of 50-100% of the maximum power. Flaring system is unused. Only a test run was conducted so as new and in very good condition! System is still built and can be visited at any time!

Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.

Poly-clip PDC 600 Semi Automatic Double Clipper, for fibrous, plastic, natural and collagen casings, calibres up to 90 mm, on a trolley, Suitable for following clip sizes: S 625 / 628 / 632 / 638, upon request with separator, in good condition!

Halbautomatischer pneumatically operated hand filler, ATEX compliant, any filling volumes from 20-1000 ml with different dosage piston, higher dosing volumes with multiple hub possible, suitable for filling liquid and semi-solid products

Rod tube

VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg G & BAR-BV-1 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78

Used semi-automatic batcher granules machine, type DP/3. Production - Italy. New 2005. Stainless steel.

Korimat KA 160 autoclave, 120 liters, 1.6 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

AUTOMATIC HYDRAULIC GUILLOTINE type MONGUZZI TRA 2600 Second hand machine Volt. 380/50 Working conditions : good Technical details : max. useful cutting length mm. 2650 max. useful cutting heigth mm. 100 max. useful cutting width mm. 1000 min. useful cutting width mm. 40 hydraulic motor power Hp 5,5 net weigth kgs. 2600 CE mark : NO

Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, smooth surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more.

HEIDELBERG Stahlfolder RFH 66/4 BCUH of 2007 16 pages combined. International - English & German fold A folding machine of 66 cm, config; -1St unit 4 x. Pockets, round pile feeder + 3 x. Knives KTL = 16 pages - int. English or German folds > > Option: VF-66 2006 - Mobile knife / total fold 32 pages < < Delivery St. Unit TSH 70 presser stacker Condition; VERY GOOD condition, immediately available, Can be lakes in our factory at Strasbourg FR

Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.