140,947 used machines on RESALE, but how to find them? Machine Search
Technical data: Cutting range: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest offcut length: 35 mm Total connected load: 2.0 kW Saw motor, power frequency controlled: 1.5 kW Cutting speed infinitely variable at frequency controlled: 20 - 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, top in maximum position: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Stepless cutting speed - Saw blade guides made of carbide, replaceable - Hydraulic cutting feed - ...
CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0)
cutting diameter: 255 mm dimensions of saw-band: 2750 x 27 x 0,9 mm cutting width: 200 x 320 mm cutting speed: 20 bis 80 m/min : 125 mm : 125 x 125 mm : 195 mm Impact energy: 350 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,1 x 0,8 x 1,75 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 235 mm dimensions of saw-band: 2645 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 45/90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 400 Volt total power requirement: 1,1 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.
Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg
Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, Horizontal band saw, Automatic band saw type C-916A -Cutting dimensions (flat): approx. 410 x 230 mm -Cutting data round: approx. 230 mm -Cutting data square: approx. 230 mm -Saw blade speed: continuously adjustable, 15 - 120 m/min -Engine power: 3 kW -Saw blade: approx. 4014 mm -Coolant system: present -Dimensions: 2080/1400/H1390 mm -Weight: 670 kg
Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor
Key data: 230 mm
suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece
Automatic sawing machine MEP 320 AXI, Information about technical data are not binding., Machine available subject to prior sale., Round cutting capacity: 260 mm, Rectangular cutting capacity: 320x000 mm, Blade dimension: 3150x27x0.9 mm, Band speed range: 20 - 100 m/1 (Stepless), Weight: 1.000 Kg
Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile
Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg
CONTROLS PLC TECHNICAL SPECIFICATION max. cutting height: 360 mm sawband length: 5334 mm sawband width: 41 mm max. bar feed (single stroke): 600 mm cutting speed min.: 14 m/min cutting speed max.: 102 m/min power of band drive: 5.5 kW ELECTRICAL SPECIFICATIONS total power consumption: 10 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2840 mm space requirements -front/back-: 2800 mm total height: 2130 mm total weight approx.: 2540 kg
cutting diameter: 200 mm band length: 350 mm capacity 90 degrees: round: 200 mm total power requirement: 3,0 kW weight of the machine ca.: 0,45 t dimensions: 1,4 x 1,4 x 1,3 m Automatic hacksaw - with 1000 mm infeed roller conveyor - preset counter - material stop with trigger, max. 600 mm - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
work piece width: 1.200 mm workpiece height: 500 mm bore diameter: 8 - 40 mm Number of drilling agregates: 3 Stk. spindle speed:: 150 - 1.100 U / min tool changer: 15 Stk saw blade diameter: 1.430 mm cutting speed: 8 - 30 m/min total power requirement: 43 kW weight of the machine ca.: 20 t dimensions of the machine ca.: m Working Capacity Angle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mm Channel sections: 80 × 45 mm to 400 × 110 mm I-beams: 80 × 46 mm to 600 × 220 mm Wide flange beams (HE): 100 × 100 mm to 1,008 × 302 mm Special wide flange and welded T-beams: up to 1,200 × 500 mm Workpiece Data Max. workpiece width: 1,200 mm Max. workpiece height: 500 mm Drilling Unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 – 40 mm Spindle speed: 150 – 1,100 rpm Drilling feed: 0 – 500 mm/min Rapid approach: 3,850 mm/min Rapid return: 8,000 mm/mi ...
cutting diameter: 235 mm dimensions of saw-band: 2645 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 0 - 90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 230 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double-miter band saw - Variable speed control - Miter cuts up to 60° left and 45° right - Vise with quick-clamping mechanism - Blade tension monitoring - Automatic electric cooling system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ADIGE TT640 circular sawing machine was built in 2009 in Italy by ADIGE S.p.A. The machine enables precise, automatic cutting of a wide range of metal workpieces, such as bars, tubes and profiles. Solid, square and rectangular sections are machined by means of a cutting disc with a maximum diameter of 275 mm. It ensures high repeatability and cutting precision in both unit and series production. The ADIGE TT640 is equipped with a feeder that facilitates the loading of material into the workspace and enables continuous machine operation. The intuitive SIEMENS SIMATIC PANEL HMI control panel enables precise programming and control of process parameters, ensuring user-friendly operation. All this is complemented by an extremely rigid design that maintains high operational stability even during the most intensive use. The ADIGE TT 640 automatic circular sawing machine weighs 1350 kg. T ...
cutting diameter: 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 20 - 140 m/min saw band length: 3720 x 34 x 1.1 mm height of material-table: 825 mm coolant capacity: 80.0 l total power requirement: 2.5 / 3.5 kW weight of the machine ca.: 1500 kg range L-W-H: 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range via handwheel including analogue value display - automatic height adju ...
cutting diameter: 280 mm saw band length: 4200 mm cutting width: 280 x 280 mm dimensions of saw-band: 4200 x 34 x 1,1 mm cutting speed: 18 - 115 m/min multiple feeding: 0 - 6000 mm power capacity: 3,0 kW coolant: voltage: 400 V total power requirement: 5,0 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 330 mm saw band length: 4115 mm cutting width: 0,9 mm main drive motor: 3,7 kW Roller conveyor length: 5000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 13 KVA weight of the machine ca.: 1,8 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...
cutting diameter: 330 mm saw band length: 4115 mm cutting width: 0,9 mm main drive motor: 3,7 kW Roller conveyor length: 5000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 13 KVA weight of the machine ca.: 1,8 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...
cutting diameter: 1300 mm saw band length: 11880 mm cutting width: 1,6 mm main drive motor: 11 kW table surface area: 2500x1300 mm cutting range: 1300x1300 mm total power requirement: 16 KVA weight of the machine ca.: 17,75 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...
cutting diameter: 1300 mm saw band length: 11880 mm cutting width: 1,6 mm main drive motor: 11 kW table surface area: 2300x1200 mm cutting range: 1300x1300 mm total power requirement: 16 KVA weight of the machine ca.: 17,75 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...
cutting diameter: 530 mm saw band length: 6670 mm cutting width: 530 mm Control: CNC main drive motor: 7,5 kW roll guideway: optional total power requirement: 13 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of ...
saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1.5 / 2.2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. ...
cutting diameter: 800x500 mm saw band length: 7200x40 mm cutting width: 880 mm cutting speed: 60-100 m/min engine output: 7,5 kW weight: 8800 kg total power requirement: 7,5 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 26500x6000x2100 m Horizontal bandsaw manufacturer: Behringer, Horizontal bandsaw Automatic bandsaw type HBP 430 Metal bandsaw, Band saw machine, bandsaw, Vertical bandsaw, Horizontal bandsaw, hydr. horizontal bandsaw machine, Semi autom, Band saw machine, Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium
APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: Workpiece length: 55170 mm Workpiece height: max. 27.5 mm Workpiece width: max. 28 mm Milling units: 2 Cross-cut saw: 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany
: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...
dimensions of saw-band: 2910 x 27 x 0,9 mm capacity 90 degrees: round: 240 mm capacity 90 degrees: flat: 310 x 240 mm : 200 mm : 200 x 200 mm : 200 mm : 200 x 200 mm : 140 mm : 200 x 140 mm rest piece length: 60 mm work height max.: 900 mm dimensions: 800 x 1750 x 1500 mm weight of the machine ca.: 470 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350x32x2,5 mm : 15-90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 90x90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 3 kW weight: 685 kg Overall size: 2050x1100x1800 mm turning speeds: 15/90 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 3350x27x0,9 mm capacity 90 degrees: round: 260 mm capacity 90 degrees: flat: 300x260 mm capacity 45 degrees: round: 200 mm capacity 45 degrees: flat: 180x180 mm : 130 mm : 120x120 mm : 25 mm min. dia.: 5 mm work height max.: 900 mm : 35/75 m/min weight: 710 kg Standard equipment: - Fast miter adjustment by scale - miter turning point is the point of intersection between saw blade and material system, no changes in the length measure - Manual material tension - at each angular position of the saw frame is the Material stretched parallel in 90 ° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - Machine stand with chip collecting tray - saw blade drive with limit stop - Precise saw band carbide roller guide Additional standard equipment 260 ...
cutting width: 375 mm Cutting height: 150 mm dimensions of saw-blade: 500 x 30 mm Motor output: 2 x 3 kW Cutting length: 5100 mm speeds: 2800 U/min air pressure: 6 bar weight of the machine ca.: 700 kg dimensions of the machine ca.: 6100 x 1450 x 1450 mm Profile support plate made of steel Stable cast construction of the saw unit Large cutting range, 2 profiles can be cut at the same time Easy adjustment of the moving unit with roller guides Double storage of the swivel device Safe clamping thanks to the two-pressure system Double saw feed guide Hydropneumatic saw feed External dimension correction scale Left saw unit fixed Swivel range 45°-90° Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 500 mm throat: 1050 / 485 mm workpiece height: 300 mm saw band length: 3920 - 4050 mm cutting speed: 15 - 940 m/min table height: 1040 mm table surface area: 750 x 800 mm Table tiltable: 15 Grad total power requirement: 4,0 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made ...
cutting width: 280 mm Cutting height: 150 mm Motor output: 2 x 4,0 kW saw blade: 420 x 30 mm Cutting length: 6000 mm speeds: 2800 U/min air pressure: 7 bar weight of the machine ca.: 1750 kg dimensions of the machine ca.: 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
automatic circular saw Type: CM 601 Manufacturer: Adige Year: 2014 Control: Siemens Hours: 14611 Pipe diameter range: 10–102 mm Square profile: up to 70 × 70 mm Aluminum profile: 90 × 90 mm Cut length: up to 800 mm Step feeder 6500 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Behringer HBP 263 AG Metallbandsäge Vollautomat (2008) Hersteller: Behringer Typ: HBP 263 AG Metallbandsäge Vollautomat Baujahr: 2008 Arbeitsbereich (Ø / flach): 260 mm / 300 mm x 260 mm Kleinste Materialabmessungen (Ø / flach): 10 mm / 10 mm x 8 mm Kleinste Abschnittlänge: 10 mm Reststücklänge im Automatikbetrieb: ca. 360 mm Reststücklänge manuell: ab 20 mm Schnittgeschwindigkeit: 20 ? 140 m/min Menge Kühlschmiermittel: 60 l Anlagen- bzw. Bandspanndruck: 60 bar Motorleistung Sägeantrieb: 4,0 kW Motorleistung Hydraulikpumpe: 1,5 kW Motorleistung Kühlschmiermittelpumpe: 0,12 kW Motorleistung Späneförderer: 0,09 kW Anschlusswert: ca. 8 kW Spannung: 400 V, 50 Hz Steuer- bzw. Hydraulikventilspannung: 24 V (DC) Stromaufnahme: ca. 16 A Absicherung: 25 A Leitungsquerschnitt: min. 5 x 4 mm² Sägebandabmessung: 4.640 x 34 x 1,1 mm Gewicht (netto): 1800 kg Ma ...
cutting diameter: 15 - 300 mm saw band length: 4640 mm cutting width: 1,3 mm cutting range - square -: 300 x 300 mm feed length: 600 mm feed length: multiple: 5400 mm dimensions of saw-band: 4640 x 41 x 1,3 mm cutting speed: 19 - 130 m/min min. cut-off length: 10 mm height of material-table: 700 mm total power requirement: 7 kW weight of the machine ca.: 2,7 t dimensions of machine L x W x H: 2,35 x 2,34 x 1,95 m Accessories: chip conveyor, DRO for cutting length, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MEBA Mebamat 434 Metallbandsägeautomat Hersteller: Meba Typ: Mebamat 434 Baujahr 2013 Zustand: gut, gebraucht Einschaltstunden: 14.800h Sägestunden: 5682h Ausführung NC-Automat Motor 7,5 kW Sägeband 6220 x 41 x 1,3 mm Bandgeschwindigkeit 15 ? 150 m/min. Max. Materialdurchlass Ø 430 / 430 x 430 Kleinster Ø 5 mm Abmessungen (L x B x H) 1700 x 3100 x 2350 mm Arbeitshöhe 750 mm Gewicht 4100 kg Nullanschlag Kratzspäneförderer Minimalmengenschmierung Automatische Materialhöhen- und Breitenerkennung Rollenbahn 300cm 8x neue Ersatzsägebänder
Kaltenbach KBS 400 NA Metallbandsäge Automat (2020) Hersteller: Kaltenbach Typ: KBS 400 NA Baujahr: 2020 Zustand: gebraucht, sehr gut, unter Strom Sägeband (mm) 5.730 x 41 x 1,3 mm Motorleistung (kW) 4 Schnittgeschwindigkeit (mm/min) 15-90 Sägeblattvorschub (m/min) 0-300 Schwenkbereich 115° Rund 90° 350 mm Rund 45° 350 mm Vierkant 90° 400×;350 mm Vierkant 45° 315×;350 mm Arbeitshöhe 720 mm Gewicht 3600 Kg CNC-gesteuerte Schnittwinkeleinstellung Separat angetriebene Spänebürste Automatischer Materialnachschubgreifer mit Hublänge 2.600 mm im Einfachhub Hydraulische Bandspannung Elektronische Sägeband-Schlupfüberwachung
Key data: 235 mm, 2710 mm, 1 mm
Automatic horizontal band sw machine. Included roler material feeder. Cooling system Manual shoulder moving Manual material tightening Material stopper Speed 40-80 m/min 400V/50Hz/1.45kW
Cutting capacity: round 230 mm, square 230 mm, flat material 280 x 150 mm Cutting speed 15 – 110 m/min Mitre cuts left 45°/60° Automatic workpiece feed Hydraulic lowering Micro Spray System Coolant Setup Hold-down device Roller conveyor
: 260 mm Rund documentation: vorhanden automatic feeds: ja : ja weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1,7 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS Point-to-point control (NC) SIEMENS S7 TECHNICAL SPECIFICATION max. diameter of saw blade: 460 mm cutting capacity round: 146 mm cutting capacity square: 138 mm mitre cutting: no .. oblong: 250 mm .. .. x: 100 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 1950 mm total height: 2000 mm total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60% -Saw blade feed rate: 220 mm/s Only 200 operating hours. -3 × 2 m infeed roller conveyor, total length 6.2 ...
Semi-automatic band saw EISMO BOMAR Year of construction: 2016 Bevel cut 45° Max cutting capacity: Ø 260 mm Max vise opening: 300 mm width Motor: 1,5 KW Hydraulic vise Variable speed drive on the blade rotation Automatic descent Lubricant pump Microspraying system Supplied with some new blades Voltage: 380 V Length: 2000 mm Width: 1200 mm Total height: 1400 mm (in low position) Weight: approx 500 KG
Automatic panel sizing beam saw with rear lifting table Max panelsizes when rear loading: 5600mm x 2240mm Max. cutting length x width: 5600 x 5600 mm. Max. stack weight for the lift: 10 ton max stack height 580 mm Saw blade outstand: 125mm Main cutting motor 13,5 kW Sawblade diameter 450 mm. Scoring saw motor 2,2 kW Feed speed of the saw carriage, forward 5 to 150 m/min, return 150 m/min Speed of the pusher 80 m/min Number of grippers: 9, centers 75/275/475/1075/1775/2475/3275/4075/4875 mm. 5 air flotation tables in the front 2810 x 650 mm Controlls: CAD-matic 4.0
Cutting capacity: 4300 mm x 4300 mm. Sawblade height: 125 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 1-150 m/min. Returnspeed 150 m/min. Programm fence speed: 90 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1075/1825/2625/3425 mm. Machine control: CADmatic 4 – Professional Hardware: Windows XP (US) TFT display Software showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.
Key data: 320 mm
2 pieces - Behringer HBE 321 A Dynamic new machines for immediate delivery from stock. Attention, you get up to 15% subsidy if you exchange an old sawing machine for a new one! Equipment: Auto-Feed Control AFC Pro (Pos. 33) Active pruning monitoring (item 22) BEHRINGER Screw Chip Conveyor (Item 105) Automatic member start detection (item 535) Lighting (item 941)
maximum number of results exceeded
please refine your search
