rösen u roberts used for sale

General SKU006E028 LocationBarneveld MakeCollette, modifications by Ekato Schopfheim TypeGRAL-25 S (test model for VST type dryers) No.89MG2524 Year of construction1989 Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume25 Ltr. Specified Features - Universal mixer Paddle dryer(1x) Capacity25 Ltr Trough sizesdia. 370x260mm With jacketcheck Motor1,98/3.0 KW, 500 Volt (Ex) With lump breakercheck Motor1,62/1,18 KW, 500 Volt (Ex) Universal mixers MaterialStainless steel Universal mixercheck Capacity25 Ltr. Vessel sizesdia. 370x260 mm With jacketcheck With motor1,98/3.0 KW, 500 Volt (Ex) With lump breakercheck With motor1,62/1,18 KW, 500 Volt (Ex) Information Mounted on framecheck With switchcheck Floorspace1,9x1,0 M Total height1,7 M Weight800 KG ATEX compatiblecheckUniversal mixersColletteMixers > Universal mix ...

General SKU278N326 LocationBarneveld MakeLAUDA TypeSUK 400 W-EX Mach.No.HKS08013 Main Features Heating (medium)Electric Capacity27 KW Temp.20 °C Specified Features - Temperature control unit Temperating machineProcesscoolingsystem Heating medium:Downtherm J With coolingCoolingmedium R404 A Temperature-40 /20 gr.C. With pumpcheck Motor37 KW, 400 Volt (Ex) With temperature controllercheck Information Year of construction2008 Mounted on framecheck With switchgearcheck Floorspace1,3x1,9 M Total height2 M Weight2300 KG ATEX compatiblecheck Technical specs Extra informationheatingsystem 8 bar, coolingsystem 28 barTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are we ...

General SKU215P171 LocationBarneveld MakeBOE-THERM TypeBT TEMP 10.62 Vac. Mach.No.43588 Pressure Working pressure440 Bar Main Features Capacity6 KW Temp.95 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:water Electric capacity6 KW Temperature10-95 Degr.C. Tank capacity17 Ltr With pumpcheck Motor1,1 KW With temperature controllercheck Information Year of construction1996 With switchcheck Floorspace0,6x0,3 M Total height0,7 M Weight44 KGTemperature control unitsBoe-ThermHeat exchangers > Temperature control unitsBrand > Boe-Therm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

General SKUR1396 LocationBarneveld MakeL.B. Bohle Maschinen & Verfahren GmbH (D) TypeVMA20 V M Ex system Single Pot High Shear Granulator Mach.No.0108701001 A Nr 79398 Main Features MaterialStainless steel Volume20 Ltr. Motor17 KW Specified Features - Universal mixer Universal mixercheck Gral-granulatorcheck Capacity20 ltr ( Batch size 7 Ltr.) Vessel sizesdia. ca 300x250mm Outletdia 60mm With jacketcheck With motorcheck Rotor speed10-470 rpm With lump breakercheck With motorcheck Rotor speed1420-1870 rpm MaterialStainless steel Information Year of construction2002 With switchgearcheck Total height2,0 M Floorspace1,9x1,4 M Weight1000 Kg Extra SpecificationsThe one-pot granulator VMA is a granulation system specially optimized for pharmaceutical applications. The three process steps mixing, high-shear wet granulation and drying are implemented in a closed proc ...

General SKU219N094 LocationBarneveld MakeThyssen Henschel TypeHU/G 1750 Mach.No.831938 Main Features MaterialStainless steel Volume1750 Ltr. Motor85 KW Specified Features - Universal mixer MaterialStainless steel Universal mixercheck Capacity1750 Ltr Vessel sizesdia. 1790 x 700mm With covercheck Inlet1x dia. 150mm, 1x dia. 200mm, 1x dia. 320mm Pneumatic operated outletcheck Outletdia. 250mm With motor63,0/85,0 KW, 380 Volt Rotor speed± 40/80 Rpm With lump breaker(1x) With motor6,8/8,0 KW, 380 Volt Rotor speed± 1500/3000 Rpm Information Year of construction1987 With switchgearcheck Floorspace3,3x2,0 M Total height2,8 M Weight6000 KG Extra Specificationsinside is polishedUniversal mixersHenschelMixers > Universal mixersBrand > Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipp ...

General SKU334N528 LocationBarneveld MakeHenschel TypeHU-500 Mach.No.821197 Main Features MaterialAluminium/Stainless steel Volume500 Ltr. Motor15 KW Specified Features - Universal mixer Universal mixercheck Capacity500 Ltr Vessel sizesdia.900mm x650mm With covermanual operated Pneumatic operated outlet 300x200mm With motor15,0 KW, 380 Volt Rotor speed134 rpm Information Year of construction1976 Mounted on framecheck Floorspace2,4x1,8 M Total height3,0 M Weight1100 KGUniversal mixersHenschelMixers > Universal mixersBrand > Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Injection Molding Machine Brand: Battenfeld, model: Macropower 1100/800 unilog B8, year: 2019. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

General SKU354T993 LocationBarneveld MakeGlass TypeVSM/F 300 VIK Mach.No.3181 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume280 Ltr. Motor2.2 KW Specified Features - Universal mixer Universal mixercheck Capacity± 280 Ltr. Vessel sizesDia: 730x680 mm With covercheck Inlet28 mm Manual operated outletcheck With motor2,2 kW, 240/415 volt Rotor speed22 rpm MaterialStainless steel 1.4301 (304) Information Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,8x1,1 m Total height1,8 m Weight650 kg Extra Specifications Boiler tilt motor: 0.37 kW, 220-240/380-415 volts, 1380 rpm with vacuumUniversal mixersGlass GmbH & Co. KGMixers > Universal mixersBrand > Glass GmbH & Co. KG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

Description: Model: 405120 Variant: WDB405120 Registration number: 4788-DZZ Chassis: WD4051201V209686 Fuel: Diesel 135litres , ADBlue tank: 25litres , Hopper load capacity: 1000 Tyres: 365/80 R20 141/144G Seats: 2  , Displacement: 4/4249cm3 Power: 130kw Speed: 2200rpm , Max. Torque: 675 Overhang: 870mm Wheelbase: 3600mm Dual-circuit hydraulic system with proportional control , Proportional control, circuit I/II, with 24/48 l/min flow rate and operating pressure 200/240 bar Working hours: 1686kms MOT 11.05.22 CE Mirror Certificate CE Certificate , Includes: , Hydraulic front brushcutter FME 600 (2005), Serial Number: 05S02020497, Weight 1120kg  , Max. height 7.2m Lateral movement: 1300mm, Rotation: 240º. , Counterweight Support Road and Tunnel Maintenance System , Ice Maintenance System , Water Tank ,   ...

Used CSW End unwrapping system Manufacturer CSW Year of manufacturing 1992 Capacity up to 200 000 container h The machine is in a very good condition Inclusive lid conveyors to the seamer twin line Inclusive roll conveyors and banister Used as is without guaranty [...for more information send your inquiry to the seller.] refno: AT53

I am selling Probat UG22 from 1950. Refurbished and ready for work. Automatic start and control of temperature. Two probes za temperature in the drum and exit temperature. For more pictures and videos please feel free to ask. Refurbished 2021-2022, its in working condition, packed and ready to be shipped, all parts are original including drum and original engine from 1950,painted with high temp resist paint 500 degrees celsius. It also comes with control box (automatic power on temp measurement in drum etc)

Brand BATTENFELD Type EM 75-120 Unilog B4 All-electric Year of manufacture 2005 Clamping unit Clamping force 75 ton Opening stroke 800 mm Beam dimension (h x v) 405 x 405 mm Installation height min. 150 mm Installation height max. 480 mm Injection unit Screw diameter 18 mm Injection volume 30 cm³ Injection weight PS 27 gr Injection pressure 2440 bar Dimensions and weights Dimensions LxWxH 4.5 x 1.7 x 2.0 m Machine weight 4500 kg

DIRECT FROM PRINT SHOP We are selling this machine on behalf of our customer and are trying to realise his asking price. However, we are open to offers from you. Offer consisting of: Kallfass UNIVERSA 5050 - Angle welder Universa 5050 - Shrink tunnel Compact 650 S - Roll delivery On request we can organise the following for you: Packing, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

General SKU394U1129 LocationBarneveld MakeLauda TypeTR400 HHKT-EX Mach.No.HKS08020 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity306.45 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Thermal oil heatercheck Therminol D12 Heating medium:Oil Heating capacity300 kW Electric capacity306,45 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck Capacityunknown Motor5,5 kW, 400/690 Volt, 2880 rpm (EX) Information Year of construction2008 CEcheck Floorspace2,15x1,0 m Total height2,50 m ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are we ...

General SKU394U1128 LocationBarneveld MakeLauda TypeTR400 HHKT-EX Mach.No.HKS08019 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity306.45 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Thermal oil heatercheck Therminol D12 Heating medium:Oil Heating capacity300 kW Electric capacity306,45 kW, 400Volt Temperature-40°C/+200°C With pumpcheck Capacityunknown. Motor5,5kw, 400/690 volt, 2880rpm (ex) Information Year of construction2008 CEcheck Floorspace2,15x1,00 m Total height2,50 m ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU422U1325 LocationBarneveld MakeGlass GmbH TypeVAS-80 Mach.No.3874 Main Features MaterialStainless steel Volume80 Ltr. Motor4 KW Specified Features - Universal mixer Universal mixercheck Capacity80 Ltr. Vessel sizesDia. 490x440 mm With covercheck InletDia. 100 mm Manual operated outletcheck tilting With motor4 kW, 230/400 Volt, 1464/136 rpm With variable speed drivecheck frequency inverter Rotor speed24-240 rpm MaterialStainless steel 1.4301 (304) Information Year of construction2016 Mounted on wheelscheck With switchgearcheck Total height1,6 m CEcheck Floorspace1,4x1,3 m Weight450 kgUniversal mixersGlass GmbH & Co. KGMixers > Universal mixersBrand > Glass GmbH & Co. KG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to insp ...

General SKU213W136 LocationBarneveld MakeDiosna TypeP-400A Main Features MaterialStainless steel Volume400 Ltr. Motor24 KW Specified Features - Universal mixer Universal mixercheck Capacity360 Ltr. (max. 400 Ltr.) Vessel sizesDia. 1200x617 mm With covercheck Inletdia. 820 mm Pneumatic operated outletcheck Outletdia. 290 mm With motor21/24 kW Rotor speed65-130 rpm With lump breakercheck With motor4/5,2 kW Rotor speed1500/3000 rpm MaterialStainless steel 1.4301 (304) Information Mach.No.250-037 Mounted on framecheck Mounted on legscheck With switchgearcheck Floorspace2,50x1,90 m Total height2,60 m Weight2100 kgUniversal mixersDiosnaMixers > Universal mixersBrand > Diosna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the m ...

General SKU204U938 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120711 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:Water Heating capacity24 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction5/2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 31.1 kVA, 43.3ATest pressure 32.5 bar Machine casing is not present.Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature c ...

General SKU204U940 LocationBarneveld MakeSingle TypeSTW 200/1-12-25-H2.1 Mach.No.083817 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:water Heating capacity12 kW Temperature+10/+200°C Tank capacity24 Ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 18.2 kVA, 26.4A Test pressure 32.5 bar Machine casing is not present. Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Sin ...

Universal machine Manufacturer: Stephan Type UMC 5 Capacity 5 liters Power 0.75 kW 300-3000 rpm. infinitely variable Manual wall stripping cool/heated Stainless steel bowl Ready-to-use state

This HAAS UMC-500SS Vertical Machining center was manufactured in the year 2021 in the United States. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This HAAS UMC-500 Universal Machining center was manufactured in the year 2020 in the United States. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This HAAS UMC-500SS Universal Machining center was manufactured in the year 2021 in the United States. It is equipped with a HAAS CNC control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

Universal machine Manufacturer : Stephan Type: UMC 12 F Capacity: 12 liters Technical data : Bowl capacity 12 litres, batch capacity 2-7 litres, standing on stainless steel table Bowl stainless steel, lid stainless steel up to 3000 rpm. frequency-controlled Vacuum-proof Double jacket for cooling/heating Manual wall stripping suitable for mixing, crushing, emulsifying Very good and functional condition.

General SKU222W220 LocationBarneveld MakeNiro-Fielder Main Features MaterialStainless steel Volume25 Ltr. Motor5.5 KW Specified Features - Universal mixer Gral-granulatorcheck Capacity25 Ltr. Vessel sizesdia. 400x200 mm With covercheck Inletdia. 32 mm (2x) Pneumatic operated outletcheck Outlet150x150 mm With jacketcheck With motorcheck 4/5,5 kW 380 Volt Rotor speed243/486 rpm. With lump breakercheck With motor1,3/1,8 kW Rotor speed1500/3000 rpm. Information Mach.No.90,765 With switchgearcheck Floorspace1,3x1,0 m Total height1,6 m Weight740 kgUniversal mixersNiro FielderMixers > Universal mixersBrand > Niro Fielder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...

A&T universal gripper UG02 full hardoxAVS Rotator Made in AustriaRotator ARG30-2Recording SWM010 (M03)Weight with rotator 79 kgShell width 300 mmOpening width 980 mmContents 27 litres.Load holding valve!

A&T universal gripper UG05 full hardoxRecording Lehnhoff MS03 or Martin M10 can be selected!4-7ton excavator weightOperating weight complete: 243kgClosing force 26 kNOpening width: 1275mmShell width: 450mmContents: 86 litersTorque rotator: 2800NmRotator and cylinder: 320 barload holding valve

Description: b-axis -5 / +100 ° c-axis + / - 360 ° Clamping surface Ø 630 x 500 mm Table load max. 200 kg Total power requirement 38 KVA Description: manual. handwheel Spindle oil cooling system Coolant filter system with Ruma centrifuge Kraft & Bauer fire extinguishing system (incl. extinguishing agent bottle) Elbaron air purification system 4 machine feet z-motion: 400 mm, x-motion: 500 mm, y-motion: 450 mm, control: SIN 840 D, taper: DIN 69893 HSK-A63, toolchanger positions: 16, turning speed range: 10,000 rpm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 5,500 x 2,500 mm

General SKU204U931 LocationBarneveld MakeSingle TypeCompact TK-90-6-24 Mach.No.162166 Pressure Working pressure3.8 Bar Main Features Heating (medium)Electric Capacity6 KW Temp.90 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:Water Heating capacity6 kW Electric capacity380-415 volt, 8,3 kVA With coolingcheck 24kW. no cooling compressor, only external cooling Temperature90°C With pumpcheck With temperature controllercheck MaterialStainless steel Information Year of construction2016 With switchcheck With switchgearcheck CEcheck Floorspace0,80 x 0,27 m Total height0,85 m Weight46 kg Extra SpecificationsMax flow rate 40 l/minTemperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in w ...

General SKU204U936 LocationBarneveld MakeSingle TypeCompact TK-90-9-50 Mach.No.162167 Pressure Working pressure3.8 Bar Main Features Heating (medium)Electric Capacity9 KW Temp.90 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:water Heating capacity9 kW Electric capacity380-415 volt, 11,4 kVA With coolingcheck 50kW. no cooling compressor, only external cooling Temperature90°C With pumpcheck Motor1.0kW, 400Volt, 2790 rpm With controlcheck MaterialStainless steel Information Year of construction2016 With switchcheck CEcheck Floorspace0,80 x 0,27 m Total height0,85 m Weight46 kgTemperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared t ...

Description: Grinding length: 320 mm center height: 100 mm Center width: 400 mm Swiveling screen cover Incremental measuring system with digital display Machine light Grinding spindle speed: 1800 - 1970 - 2170 1/min Grinding wheel large: 350 mm Grinding wheel small: 250 mm Max. Width: 50 mm Coolant capacity: 180 liters Filtering capacity: 60 l/min Internal grinding device: 25000 1/min Approx. Onsite Dimension. (l x w x h): 1,800 x 1,700 x 1,600 mm, weight approx.: 2,000 kg

Description: Center height 100 mm Center width 400 mm grinding length 320 mm grinding wheel speed: 1800 / 1970 / 2170 rpm grinding spindle motor 3 kw internal grinding spindle 22000 / 28000 rpm internal grinding diameter 8 - 60 mm grinding depth 14 - 60 mm Approx. Onsite Dimension. (l x w x h): 1,800 x 1,700 x 1,600 mm, weight approx.: 2,000 kg

Description: Connection: 1000 W Rated current: 26 kHz Welded design made from 1.4571 2 mm thick Dimensions: 495 x 315 x 85 mm 1.5 m flexible Teflon hose Consisting of 2 pieces Incl. 2 ultrasonic cleaning generators Operating voltage: 230 V Frequency: 50 Hz Connection: 1000/2000 W All in original packaging Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 150 kg

Description: x-travel 850 mm y-travel 630 mm z-travel 500 mm Spindle drive 12 kW Spindle speeds 25 - 4200 rpm Spindle taper ISO 40 Quill stroke 90 mm Feed range 1 - 10000 mm/min Table size 800 mm Total power requirement 15 kW with HEIDENHAIN TNC 407 - NC round table - Splash guard - various tool holders Approx. Onsite Dimension. (l x w x h): 4,300 x 4,400 x 2,300 mm, weight approx.: 4,000 kg

Description: Serial number: 5X1162, 400 V, 50 Hz, 3 phases, Main motor: 26 kW, Total capacity: 75 kVa, Hydraulic pressure: 30 bar, Weight: 9 t Equipment based on order confirmation: Milling swivel head: - With torque motor and hydraulic clamping clamping, drive power 29 kW - Swivel range +30/-120°, infinitely variable - 14,000 rpm, 160 Nm torque - Separate spindle cooling for constant temp. - HSK-A63 tool holder with blow-out function Integrated rotary table: - With torque motor and hydraulic clamping, Ø 610 mm - Extended clamping area 1,100 x 610 mm General: - Heidenhain glass standards in all 5 axes - 60-position tool changer with double arm gripper - Coolant and compressed air gun - Chip conveyor, coolant device - Electronic handwheel - Work area light - Ergonomic control console Heidenhain TNC 640 control - 15” color flat screen (TFT) - Ethernet interface - 2x USB connection, CE ...

Description: Travel B-axis -115° to +30°, C-axis NX 360° Including ATC 75 tool change magazine, chip conveyor  , A standard truck is sufficient for transportation z-motion: 450 mm, x-motion: 600 mm, y-motion: 450 mm, control: HEIDENHAIN ITNC 530, table surface area l x w : 270x270 mm, taper: HSK - A 63, toolchanger positions: 75, turning speed range: 100 bis 20000 rpm, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 4,000 x 2,000 mm

Description: Serial number 1058 , B-axis travel - 115° to + 30° , C-axis travel NX 360° Including coolant system , Chip conveyor , Tool change magazine ATC 220 , Table diameter 450 mm  , Attention, the clamping pallets and the machine vices shown are not included in the scope of delivery! A standard truck is sufficient for transportation. z-motion: 450 mm, max. workpiece weight between centers: 200 kg, x-motion: 600 mm, y-motion: 450 mm, control: HEIDENHAIN iTNC 530, taper: HSK-A63, toolchanger positions: 220, power capacity - spindle: 23 / 30 kW, spindle torque: 91 Nm, turning speed range: 100 - 20000 rpm, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 4,000 x 2,500 mm

This 5-axis MTcut UD100-5A was manufactured in 2017 and features a robust design with a 1,000 mm X-axis, 800 mm Y-axis, and 700 mm Z-axis. It includes a 52-position tool changer, integrated rotary table, and a milling swivelling head with a 14,000 rpm spindle. Ideal for complex machining tasks, the MTcut UD100-5A machining center we have for sale is immediately available. Contact us for further details regarding this machining center.

Description: Cold bending: flat steel 100 x 5 mm square steel 16 x 16 mm Round steel 18 mm angle steel 60 x 8 mm - Hot bending: flat steel 100 x 15 mm square steel 30 x 30 mm round steel 30 mm angle steel 100 x 12 mm Fitted with eccentric quick clamping device readable bending angle up to 120 degrees angle stop lever and bending jigs material stop delivered in original packaging unused ! Approx. Onsite Dimension. (l x w x h): 300 x 220 x 250 mm, weight approx.: 35 kg

General SKU204U934 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.083814 Pressure Working pressure20 Bar Main Features Heating (medium)Steam Capacity69.6 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:Water Heating capacity24 kW With coolingcheck (no cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor400-690 volt, 4 kW, 2950 rpm With temperature controllercheck MaterialStainless steel Information Year of construction2008 With switchcheck CEcheck Floorspace1,60x0,32 m Total height1,21 m Weight309 kg Extra SpecificationsPower 30,6 kVA, 44,2A, test pressure 32,5 barTemperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperierte ...

General SKU204U937 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.083815 Pressure Working pressure20 Bar Main Features Heating (medium)Steam Capacity69.6 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:Water Heating capacity24 kW With coolingcheck (no cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200 ltr/min, Hmax 80 m, 2800 rpm Motor400-690 volt, 4 kW, 2950 rpm With temperature controllercheck MaterialStainless steel Information Year of construction2008 With switchcheck CEcheck Floorspace1,60x0,32 m Total height1,21 m Weight309 kg Extra SpecificationsPower 30.6 kVA, 44.2 A, test pressure 32,5 barTemperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperie ...

grinding diameter:260 mm grinding length:1000 mm centre height:130 mm dimensions of grinding wheel:400x60x127 mm grinding wheel speeds:1700,1900,2200 U/min grinding head swivelling:+/- 30 Grad table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

x-travel:1000 mm y-travel:1150 mm z-travel:700 mm table-size:900 mm table load:1500 kg spindle speeds:10.000 1/min spindle drive:Motorspindel von Cytec CS34-180-A 34&42KW/160&200 Nm spindle taper:A100 HSK T-slots:18mm/7/100 mm milling feed range:20.000 mm/min rapid traverse feeds:X/Y/Z: 24 m/min diameter of tools max.:150 mm workpiece length:300 mm weight of tools max.:20 kg weight of the machine ca.:15 t dimensions of the machine ca.:s. Katalog m CNC controller:Heidenhain iTNC-640 HSCI-Steuerung cnc rotary table:von Cytec; mit Ø900mm; 800 1/min Drehmomenttisch (AS3347) + HSK-T63/100 Spindel & ATC + TNC-640 Fräsdrehzahlregelung B-axis:Fräskopf, 0-180° c-axis:0,001° automatic tool changer:HSK-A/T100; 60 fach Scales:in X/Y/Z von Heidenhain mit Druckluft inner coolant:20

x-travel:3600 mm y-travel:1250 mm z-travel:1600 mm table load capacity:8000 kp table clamping surface::4100 x 1050 feed range:10 - 5000 mm/min rapid traverse feeds:10000 mm/min spindle motor:29 kW spindle taper::ISO 50 spindle turning speed range:5 - 4000 U/min total power requirement:70 kW weight of the machine ca.:28 t dimensions of the machine ca.:8,5 x 5,4 x 3,2 m Machine with Heidenhain TNC 430 Steuerung - tool changer 30-fold - milling head indexable 2,5° - 4. axis turn table

table diameter:520 x 22 mm table - swivable:45 Grad total power requirement:1,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:520 x 520 x 1200 mm mit Schleifzylinder Zubehör: 4 ( Aluzylinder) Werkzeuge zur Aufnahme von Schleifmitteln Ø 50, 70 , 90, 120 mm x 223 mm neuer Motor

x-travel:600 mm y-travel:500 mm z-travel:450 mm turning speeds:5 - 5000 U/min quill stroke:90 mm total power requirement:9 kW feed range:0-10.000 mm/min weight of the machine ca.:3260 kg dimensions of the machine ca.:2200x2800x2000 mm spindle:6 kW vertical milling head:SK 40 automatic tool changer:22 Pos. CNC universal milling machine with toolchanger, Equipped with CNC-Heidenhain TNC 407 el.handwheel coolant device

x-travel:2.500 mm y-travel:1.000 mm z-travel:1.250 mm table surface area:2.700 x 900 mm control:TNC 430 HEIDENHAIN turning speeds:4.500 1/min tool taper:SK 50 spindle drive:20 kW table load:8 t weight of the machine ca.:16,5 t CNC milling machine, millling head swivelable in 2 layers 1°/2,5°, chip conveyor, no toolchanger

x-travel:600 mm y-travel:400 mm z-travel:420 mm table diameter:540 mm spindle turning speed range:20 - 4000 U/min spindle motor:6 kW spindle taper ISO:40 Table dimensions:900 x 460 mm feed range:1 - 5000 mm/min total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:4,2 x 4,0 x 2,1 m Machine with CNC HEIDENHAIN TNC 415 automatic toolchanger 32 pockets measuring probe head coolant attachment fixed table hand operating panel

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Mono With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type MONO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type DUO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm