We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,628 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
This HAITIAN JU650II Injection moulding machine was manufactured in the year 2018 in China. The machine has a clamping force of 6500 kN and a screw diameter of 80 mm.
used
This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2001 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. It comes with a linear robot ENGEL ERC 23/2-EA (2002). Production hours are at 98167.
used
This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.
used
This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with an ARBURG SELOGICA control unit. The machine has a clamping force of 800 kN and a screw diameter of 30-40 mm.
used
This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2001 in Germany. It is equipped with an Arburg control unit. The machine has a clamping force of 800 kN.
used
This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min 250 mm.
used
This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm).
used
This Battenfeld HM 13000/9200/7700 Injection moulding machine was made in 2004 in Germany and has 67871 hours. The machine has a clamping force of 13000 kN and a screw diameter of 120 mm.
used
This Krauss Maffei KM 280-1400 C3 injection moulding machine was made in the year 2003 in Germany and has 60000 hours. The machine has a clamping fore of 2800 kN and an injection pressure of 2380 bar.
used
This KRAUSS MAFFEI 50-180CX Injection moulding machine was manufactured in the year 2013 in Germany. The machine has a clamping force of 500 kN.
used
This FOSTAG 64fold injection mold for injection moulding machine was built in the year 2003 in Switzerland.
used
This LS MTRON LGH170D-ES Injection moulding machine was manufactured in the year 2017 in China. This machine has a 1706 kgf/cm2 pf pressure. Contact us anytime for further questions.
used
This Krauss-Maffei 160-380 CX Injection moulding machine was manufactured in the year 2016 in Germany. It is equipped with a clamping force of 1600 kN, a SP 380 injection unit with a screw diameter of 35 mm. Shot weight for PS is at 140g.
used
This Battenfeld HM 10000 Injection moulding machine was manufactured in the year 2005 in Germany. The machine has a clamping force of 10000 kN.
used
Offer: Engel Duo 940H/940 M/650 Combi Year 2011 2x Viper Robot 40 PS: Machine free from approx. 08/2021
used
This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.
used
This Tederic DE360 Injection moulding machine was manufactured in the year 2018. It is equipped with a TEDERIC KEBA 2880 control unit. The machine has a conveyor belt of 3000 x 600 mm.
used
This Husky H225 RS 45/38 Injection Moulding Machine was made in the year 2013 in China and has 54744 hours. The machine has a clamping force of 2250 kN and a screw diameter of 38 mm.
used
This FERROMATIK MILACRON k-tec 40 S Injection moulding machine was manufactured in the year 2004 in Germany. The machine has a clamping force of 400 kN.
used
This HPM Hemscheid 750-250 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 750 kN and a screw diameter of 36 mm.
used
This Ferromatik Milacron ELEKTRA evolution / EE 30 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 300 kN and a screw diameter of 18 mm. Operation hours are at 88999h.
used
This FERROMATIK Milacron K-Tec 85 Injection moulding machine was manufactured in the year 2006. The machine has a clamping force of 850 kN and a screw diameter of 25 mm.
used
This Ferromatik Milacron K-TEC 200 S Injection moulding machine was made in 2007 in Germany. It has a clamping force of 2000 kN and a screw diameter of 40 mm. The operating hours are at 65545h.
used
This Battenfeld BA 3500/1900 BK injection moulding machine was built in the year 2000. It is equipped with a Unilog 4000 control unit. The machine has a clamping force of 3500 kN. See video gallery for more impressions.
used
This Husky H300 RS 55/50 Injection Moulding Machine was built in the year 2013 in China and has 62707 hours. The machine has a closing force of 3000 kN and a screw diameter of 50 mm.
used
This Ferromatik Milacron K-TEC 60 S Injection moulding machine was made in 2003 in Germany. It has a clamping force of 600 kN and screw diameters of 18 mm (vertical) and 25mm (horizontal). Operation hours are at 96555h.
used
This Ferromatik Milacron EE 75 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 750 kN and a screw diameter of 30 mm. The operating hours are at 96694h.
used
This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2002 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. Production hours are at 94904.
used
This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit.
used
This Netstal SynErgy 1750-460 Injection moulding machine was made in 2001 in Switzerland. It is equipped with a Netstal control unit. The machine has a clamping force of 1750 kN.
used
This SANDRETTO HES 3500 injection moulding machine was built in the year 2010.
used
This Battenfeld VM 150/525 R1280 Unilog B6P Injection moulding machine was manufactured in the year 2015 in Austria and has 40470 production hours. It is equipped with a BATTENFELD UNILOG B6 control unit.
used
This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.
used
This HPM Hemscheid 2500-1400 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 2500 kN and a screw diameter of 63 mm.
used
This SUMITOMO SHI DEMAG Ergotech 350 Concept Injection moulding machine was manufactured in the year 2003 in Germany. The machine has a clamping force of 3500 kN and a screw diameter of 60 mm.
used
This SUMITOMO SHI DEMAG 1300-8000 injection moulding machine was made in 2010. The machine has a clamping force of 13000 kN and a screw diameter of 110 mm. It Includes a robot MASTER MATTIC RB400CN.
used
This Battenfeld EcoPower180 Injection moulding machine was manufactured in the year 2012 and has less than 500 hours. It is equipped with a Battenfeld Unilog B6 control unit.
used
This Ferromatik K-TEC 60 S Injection moulding machine was made in 2006 in Germany. It has a clamping force of 600 kN and screw diameters of 18mm (vertical) / 25mm (horizontal). Operation hours are at 75874h.
used
This BMB Ekw 70pi Hybrid Injection moulding machine was manufactured in the year 2015. It is equipped with a HEIDENHAIN control unit. The machine has a clamping force of 7000 kN and a screw diameter of 100 mm.
used
This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available.
used
screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
This Ferromatik Milacron K-TEC 60 S Injection moulding machine was made in 2000 in Germany. It has a clamping force of 600 kN and a screw diamter of 25 mm. The operating hours are at 12968h.
used
Injection molding machine Brand Negri&Bossi Nb 40 400 h - 115 year 1996 pres.idr.max 150 power kw 11 -- hz 50 -- volts 380
used
Warehouse No.: 503010 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 47942 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...
used
Warehouse No.: 503011 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 39299 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 35 mm - Shot weight max: 123 g - Injection pressure: 1.964 bar - Injection volume: 0 cm? - Screw speed: 400 rpm - Screw L/D ratio: 20 - Nozzle stroke max: 240 mm - Clamping force: 850 kN - Mould height max: 450 mm - Mould height min: 250 mm - Daylight between platens max: 800 mm - Platen size h: 690 mm - Platen size v: 690 mm - Ejector force: 50 kN - Core pullers: 1 x KDE-6-S-B - Oil tank capacity: 290 l - Power: installed max: 29 kW
used
DEMAG EXTRA 200-840 ECQ (129) Without funnel Year of construction: 2007 Brand: Demag Specifications Spray weight: 400 g Clamping force 2000 kN Screw diameter: 50 mm Spray pressure: 1646 bar Spar spacing: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Weight: 9000 kg Dimensions: 6.7 x 1.8 m Toggle lever locking unit: Yes
used
Injection unit Screw diameter: 35 mm Closing unit Closing force : 1000 kN Distance between tie-bars: 520 x 520 mm Other Equipment : FULL ELECTRIC machine NC5 control Commissioning : 2010 Tonnage : 100