roto flo used for sale

Used Rheinhardt Technik Conti Flow Vario 2K for bonding and sealing dosing system !

Used stainless steel belt press made by Flottweg model B-FRU-500 made in 2010. Capacity 500-2000 kg/h. The press includes pulp pump, circulation pump, wash water screen, pressure pump, juiice pump, stationary juice screen, control panel, piping.

turning diameter: 100 bis 400 mm tool taper: SO weight: 30 t control: Siemens 840 D Ball machining center Special facility for balls 100 to 400 mm A viewing and demonstration is possible by appointment. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered out of insolvency is a ready-to-use tapping machine Manufacturer: Flott Model SB 15 GL Built in 1989 Masch.No.34177063 Specifications: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Projection 200mm Chuck Bilz WFP 1 + inserts Drill chuck Röhm 0-10mm Foot switch Digital display Pinolhub Single continuous cycle Emergency stop Speeds from 80-3150rpm 380 volts Motor power 0.75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs lead screw--pitch-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions Weight approx. 200kg

Key data: 700 mm, 400 mm, 400 mm

Manufacturer: Flott Type: BC 40 Super Year of Make: 2005 Tool holder: BT 40 Motor: 7.5/5.5 kW Spindle speed: 50-8000 rpm X-axis travel: 700 mm Y-axis travel: 400 mm Travel Z-axis: 400 mm

Key data: 16 mm

Column Drill Speed 200- 3000 rpm 380 V 16 A Height adjustable 55 cm Expellers Drill chuck Albrecht 3 - 16 mm

Key data: 13 mm

Bench drill Speeds 400 - 4800 rpm Height adjustable 15 cm Röhm Supra 1/32 - 1/2 Weight 35 kg 380 V 16 A

Antistatic industrial flooring, grey mottled used, good condition Click plates Thickness: approx. 10.4 mm Different sizes available: ca. 410 pcs. Abm. approx. 600 x 600 mm approx. 129 pcs. Abm. approx. 600 x 300 mm ca. 90 pcs. Abm. approx. 1,000 x 600 mm ca. 40 pcs. Abm. approx. 1,200 x 600 mm ca. 3 pcs. Abm. approx. 600 x 530 mm Price: on request Location: Bochum Intermediate trade reserved

Standard equipment: With swivel head (left/right) for mitre cuts, two speeds, Stable cast construction of the machine housing, Oil bath reduction gears, consisting of bronze wheel and hardened, ground steel screw. Quick-release vise with Counterclamping device for double workpiece clamping. Long-lasting, mechanical coolant pump Adjustable length stop Operating tool Machine colour: RAL 7037 Specifications KS 315 M Motor three-phase current 400 V, Pole switchable (kW) 1.3/1.9 Vise Span(mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine Dimension with base frame (mm) 1,000 x 1,100 x 1,800 Machine Dimension 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame

Flowtech Flowboost 2V JH1 water pump system with tanks 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph

Standard equipment Main switch Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with CEE plug 3-year warranty for single-shift operation Specifications Continuous/normal drilling capacity (mm) 23/25 (in E335/ST60) Tapping capacity (pitch dependent) M16x1 Spindle MK III Drilling depth (mm) 115 Projection (mm) 260 Column diameter (mm) 110 Usable work surface (W x L) (mm) 420 x 340 T-slot size (arm), spacing (mm), dimension width (mm)Quantity 2, 125, 13/26 Speed display: digital Drilling depth display: digital Drilling depth stop: quickly adjustable stop ring Fee ...

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Flowcon, Automatic Balance Valve, unused in original packaging -Type: F380.0.EBI F360111 -Price: per piece -Number: 2 piece -Dimension box: 185/100/H45 mm -Weight: 0.6 kg/piece

Baking oven with 4 floors, hood and stand Dimensions: 165x155x215cm Electric power: 10.5kW

Bakery Oven with 4 floors and a fermentation chamber Dimensions: 115x120x200cm Electric power: 42kW Capacity: 2 trays x 60x80cm

Vacuum Pump - Suction for Laser Dust There are two vacuum pumps. Please indicate how many you would like when making inquiries.

Complete with intelligent random in feed system. As new condition

Key data: 6000 mm, 2000 mm

Ref.Nr. 00846 Name of the system: Used waterjet machine Spare parts system Manufacturer Flow Model Foracon WS3-20/602KS Built in 1995 Sheet size 2000mm x 6000mm Achievement 9Kw ( Engine ) 2 pumps (flow) 2 cutting heads Operating hours pump 1 = 19700 h Operating hours pump 2 = 24751 h Incl. sand tower Incl. sludge removal system Renewal of the control system 2016 ( Engelmann company ) Condition of the system was disconnected a week ago Is still under power but cannot be demonstrated because the cables have been cut during disconnection Customer has used the system until the end Submission date Immediately

Diaphragm pump, centrifugal pump, water pump, chemical pump -from: scrubbing machine make Gansow -Delivery rate: 8.7 l/min -Number: 1x available -Price: per piece -Dimensions: 180/100/H110 mm -Weight: 1.6 kg

Air conditioner, air conditioning unit, condensate pump for air conditioner -Air conditioning - Manufacturer: Siccon - Type: Flowatch Design -Dimensions: 935/135/H75 mm -Weight: 1.3 kg

Refrigerant recovery system, vacuum pump for air conditioners, air conditioners, refrigeration units, differential pressure gauge -For use in: air conditioning systems with recovery, CFC, HFC and HCFC -Dimensions: 300/400/H320 mm -Weight: 19kg

Diaphragm pump, centrifugal pump, water pump, chemical pump -from: Scrubber-dryer, brand Gansow -Flow rate: 8.7 l/min -Quantity: 2 available -Price: per piece -Dimensions: 200/200/H95 mm -Weight: 2 kg

Tapping machine, bench drilling machine -Spindle mount: B12 -Tap chuck: Tapmatic 30 X M1.5-M7 -Projection: 165 mm -Motor power: 0.25 kW -Weight: 60 kg

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg

For sale is a used Schäfer & Flottmann tray erector with lateral insertion function for package inserts, package products such as e.g. Flower seed bags, etc., which are placed at the bottom of the tray. The tray is previously covered with an adhesive and can thus be fixed to the bottom of the tray. A vision system from Keyence uses the camera to check whether the products used have been positioned correctly. If not, the tray is ejected. In one of the following stations, products can either be inserted laterally or the tray is formed into an open tray. The Schäfer & Flottmann has run little and is in very good condition. There were 2 systems in stock and one of them has already been sold. There is a very extensive spare parts package worth about 150,000 € for the system

TECHNICAL SPECIFICATIONS Manufacturer: GEKO Name: Concrete recycling plant Type: Stationary Type: FLOMAT 20 Year of Make: 1995 SPECIFIC COMMENT - New bearings of the main shaft - Gearbox reconditioning and engine overhaul - New lining of the complete trough - New lid - New rubber buffer vibrating trough - New washing paddles and new screen linings on the cups - New unbalance motor on the dewatering screen - Dismantled and ready for loading

Spindle mount MK 3 Drilling capacity in steel: 30.0 mm Coolant pump

Complete baking line capacity: 1000kg/hour. Consisting of: Stainless steel vibrating supply hopper dimensions approx. 1950x1400x1350mm; Conveyor transport belt belt width 400mm; lift height 1900mm; Stainless steel baking oven inlet width approx. 700mm; min. product layer thickness approx. 40 mm max. product layer thickness approx. 70mm; Baking oven equipped with lifting mechanism oven dimensions approx. 6500x1400 mm; Stainless steel cooling tunnel dimensions approx. 3450x1000x1850 mm equipped with metal mesh belt and axial fans; Stainless steel glazing unit salt/glaze belt with agitator on mobile frame; Mobile flavoring dispenser working width approx. 800 mm; Mobile conveyor big-bag transport belt with supply hopper belt width 250 mm height approx. 2800 mm; Stainless steel controling panel; Video of bakeline in process available. Request video by contacting seller.

Decanter Z53-4/454 manufactured in stainless steel by FLOTTWEG in 2003. Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Transport information Weight 5300 Kg Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Decanter Z4E-4/454 made of stainless steel by FLOTTWEG in 2004. Material Stainless steel Technical features Model Z4E-4/454 Year of manufacture 2004 Maximum speed 4200 rpm Maximum sediment density 1.4 g/cm³ Working temperature 0/100 ºC Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Description Osai series 10 Blink CNC Osai - Prima electronics InduKey KG08755 keyboard Alps Electric Floppy Drive DF354N902G

Ulma Atlanta flowpacker, -

Sanding belt dimensions 150x2250 mm Grinding table dimensions 525 x 160 mm (without plate, the plate you can see in the photos was glued on) Table dimensions on pulley 320 x 280 mm Suction nozzle Ø 100 mm Motor power 1.1 kW Connected loads 400 V, 50 Hz, 3~, 2.5 A Dimensions: 1,400 x 400 x 1150 mm

A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible.

Length: 2700 mm Width: 1100 mm Height: 850 +- 150 mm engine output: 0,37 kW Electric capacity: 0,5 kw compressed air: 6 bar Horizontal impregnation system Pro flow for individual parts with rinsing circuit. --------------------------------- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. --------------------------------- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blo ...

spindle cone: MK 1 turning speeds: 200 - 3000 U/min table-size: 300 x 220 mm total power requirement: 520 W weight of the machine ca.: 200 kg dimensions of the machine ca.: 8004001800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Floraco adhesive tape carton sealing machine is available. On-site inspection is possible.

Table, Drilling and Tapping Machine FLOTT Type TBZ 15 GLFabr. No. 32177027 year of construction 1986Drilling capacity 15 mmSpindle mount MK2Throat depth 195 mmPine stroke 80 mmTable size 275 x 200 mmColumn diameter 70 mmSpindle speed 80 - 4500 rpm. 18 stepsMotor power 0.55 + 0.75 kWNet connection 380 volts, 50 Hz- 6 belt steps from the motor and 2 belt stages to the drilling spindle 2 motor speeds- 3 pieces guide cartridges 0.7mm + 0.8mm and 28G available- Drill head height adjustment via crank with rack on the

Column Drilling Machine FLOTT type 16 STG/R2 Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Width: 500 mm Depth800 mm Total height: 1100 mm Weight: approx 150 kg

Height=1.88 m, Overall length= 3.2 m, Overall width= 1.1 m, Net weight= 900 kg,

Boring power: 23.0 / 28.0 mm Boring depth max.: 140 mm Center of spindle to wall or column: 300 mm Column diameter: 125 mm Size of table plate: 415 x 385 mm Speed: 100 - 2000 U/min. spindle taper MT: 2 MK voltage: 380 V Motor output: 0.9 / 1.4 KW weight of the machine ca.: 225 kg Dimensions (L/W/H): 900 x 600 x 1960 mm maintained condition () Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103760 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 90.0 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with rob ...

width of the strips: 150 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 100 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible ext ...

Column Drill FLOTT 32 STG Year of Make: 1992 Drilling capacity in steel 32 mm Clamping surface table 500 mm x 360 mm Drilling depth adjustment with digital display Drilling depth 150 mm Spindle mount MK 3 Spindle speeds 140 rpm – 1400 rpm infinitely variable with digital display Drill Table Lighting

Waterjet machine Flow Incl. new maintenance kit pump incl. documentation Year of Make: 2006 Manufacturer: FLOW Europe GmbH Manufactured Date: 11/05 Working area: (L x W x H): 3600 x 2000 mm Continuous working pressure: 3,800 bar High Pressure Pump: FLOW – Hyplex Pump Model HyPlex 50 Hours: 4342 hours Maintenance intervals: Regular according to maintenance schedule Last service at: 4102 hours (major pump maintenance) Software: Flow-Master PC Software Flow PATH Module, Version 6.0 Flow CUT Module, Version 6.0 Flow Master 6.0 Professional (FlowNest) Hardware clamping and clamping device, Flow, set-up and positioning aids with laser pointer, Devices 1x Sand Silo 1x Sand mixer unit Flow 1x Water Softening (WTS) 1x collision sensor defective Documentation package, Various spare parts, all pre-pipes and cables

- 2 units availebel matching cast irion floorplates bedplates - Integrated levelling chambers - Can be used in combi with PAMA SPEEDRAM 1000 Machid 8643 - Testing area - Mounting area - Measuring area - Calibration area

Spindle Holder MK 2 Drilling capacity in steel: 15.0 mm Stepless speed adjustment with digital display Digital depth display

Spindle mount MK 3 Drilling capacity in steel: 23 mm