We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,273 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Cat. No. 12-1130 in very good condition Measurements and Weight: LxWxH: 160 x 45 x 102 cm Weight: 192 kg Model: HTIRM Type: 55VT-DS NW 50 4,4 kW 100 l/min, 6000 l/h 9 bar DN 65 Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
50,0 kW, max. 7,61 bar, 8,60 m3/min. Oil-free. Air cooled. Variable speed drive. Volume flow 2,6 - 7,6 m3/min.
used
intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox
used
Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale
used
The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.
used
The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.
used
Cat.-No. 13-0291 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 6,0 bar capacity: 6600 litres/h motor: 220 V, 380 A, 3,0 kW Connection: inlet/outlet: DN 80 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely via frequency converter Measurements and weight: length: 1200 mm width: 400 mm height: 1050 mm weight: appr. 250 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale
used
355 kW, 7.5 bar, 63.10 m3/min
used
132 kW, 10.0 bar, 18,0 m3/min.
used
SACMI line for plastic caps. Perfect condition.
used
SACMI line for one and for two component caps, with control video system.
used
Rotray screw air compressor Atlas Copco oil-free ZR 160 VSD FF 160 kW, 10,40 bar, water cooled, variable speed drive. With built-in adsorption dryer. Volume flow 6,9 - 24,4 m3/min.
used
IBEX MOG 2130BA Serial No. 931278 / 01B 400V, 5.5A integrated fan motor Connections: DN 80 Double mechanical seal, sealingwater connections
used
Solid star feeders with input and output diameter 275 mm, with gear drive 0,25 kW / 35 RPM. Several identical feeders are available (built between 2000 and 2007), in very good condition, partly unused.
used
Compressed air screw compressor Kaeser DSD 238 T 132 kW, 12 Bar, 19.92 m3/min
used
Air Screw Compressor Atlas Copco ZR 160 VSD Oil-free 160 kW, 10.40 bar, 23.60 m3/min
used
Air Screw Compressor Atlas Copco GA 250 FF 250 kW, 8.20 bar, 41.70 m3/min
used
Compressed air screw compressor Kaeser DSD 238 132 kW, 8.50 bar, 23.80 m3/min
used
Compressed air screw compressor Kaeser ESD 351 200 kW, 12 bar, 30.30 m3/min
used
We are very pleased to offer one full 40` container (FCL) containing the following compressors: Make Model Atlas Copco 1xGA 110 Atlas Copco 1xGA 75 Kaeser 1xCS 75 Kaeser 1xAS 30 Kaeser 1xBS 50 Kaeser 1xBS 60 Atlas Copco 1xGA 30 Atlas Copco 1xGA 15 Atlas Copco 3xGA 22 Kaeser 5xAS 35 For more details please contact us.
used
Compressed air screw compressor Kaeser FSD 571 315 kW, 12 bar, 46.40 m3/min
used
Air Screw Compressor Atlas Copco ZR 160 VSD Oil-free 160 kW, 10.4 bar, 23.6 m3 rpm
used
Compressed air screw compressor oil-free Atlas Copco ZR 315 VSD 315 kW, 8.6 bar, 49.2 m3/min
used
Compressed air screw compressor Kaeser ESD 301 160 kW, 8.5 bar, 30.6 m3 rpm New level 2009
used
Air Screw Compressor Atlas Copco GA 160 FF 160 kW, 7.2 bar, 27 m3/min With built-in compressed air refrigerant dryer. Refrigerant R 404a. New mineral oil. New oil separator.
used
Faceplate speed level 1: 0.005 0.25 Faceplate speed level 2: 0.019 1.02
used
used
Table load: 12 to.
used
Hydraulic Type Manufactured by Angelo Cremona Maximum Diameter 800 mm Minimum Diameter 120 mm
used
Compressed air screw compressor Kaeser DSD 281 160 kW, 8.0 bar, 25.82 m3/min
used
Compressed air screw compressor oel-free Atlas Copco ZT 90 VSD FF 90 kW, 8.75 bar, 15.50 m3/min Comment: oel-free, air-cooled, frequency-controlled. Delivery volume 4.7 - 15.5 m3/min. With integrated MD dryer.
used
used
Compressed air screw compressor Kaeser DSD 202 110 kW, 8.5 bar, 20.46 m3/min
used
1 x centrifugal pump ABB motors, used, type: M2AA180 M4 / IEC 180 M / L, 18 KW, flange connections, power approximately 100,000 ltr. / h, picture on the right, POS. 9, price: 1,200 1 x used centrifugal pump Hilge, type: HYGIA S-II / 20 d, 15 KW, connections DN 80/65, capacity approx. 80,000 ltr. / h, pictured left, POS. 10, price: 2.250,- Prices plus 19% VAT from stock Dolgesheim
used
Compressed air screw compressor oel-free Atlas Copco ZR 145 FF 145 kW, 7.5 bar, 23.20 m3/min
used
Technical data: Table load 40 to. Table diameter 3,330 mm Speed 0.01 0.2 U/Min. Voltage 400 V / 50 Hz Power 6 KW To the weight of the table 15. Dimensions L x W x H 5,600 x 2500 x 3,200 mm
used
Air Screw Compressor Atlas Copco GA 132 VSD 132 kW, 8.5 bar, 27.40 m3/min
used
Air screw compressor Atlas Copco ZR 500 VSD 500 kW, 8.6 bar, 79 m3/min Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.0 m3/min.
used
Stock number U802V-5 Used stainless steel centrifugal pump by INOXPA (Spain) type S-26E. Pump is driven by el. motor 4 kW, 3000 rpm, 220/380 V, 50 hz. Inlet has a diameter 65 mm and outlet has a diameter 45 mm. Inlet is equipped with one way valve. Rotor has a diameter 145 mm. Pump has a working output up to 50 m3/h and delivery up to 35 m.
new
Unused Düchting Centrifugal Pump Type HK200x6 Year of construction 2015 Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 300 m³/h H 490 m N 1480 1/min P 560 kW Further Düchting pumps in stock Applications: Conveyance of contaminated, chemically neutral or aggressive liquids with up to 10% solids content. Main water drainage in mining Secondary water drainage and mine air cooling in mining Pressure boosting systems in industrial processes Water supply and water treatment plants Condensate conveying Mineral fertilizer industry Oil & Gas Applications LHK125x6 HK150x11 Q150m³/h H730m n1485 1/min P430kw HK250 HPXU100x10 Q90m³/h H250m n1485 1/min P100kw HK150x5 Q163m³/h H325m n1485 1/min P210kw HK150x9 Q220m³/h H435m n1485 1/min P435kw HPXU150-200x5 Q150m³/h H665m n1485 1/min P415kw HK200x6 Q480m³/h H470m n1485 1/min P792kw HK200x4 Q500m³/h H265m n1485 ...
used
; ready for operation
used
; ready for operation
used
; ready for operation
used
; ready for operation
used
Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Price and additional information on request.; good condition, working order
used
diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price
used
Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price
used
Rated power up to 600 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (three-phase) Electrical fuse 16 A Laenge 2080 mm width 1030 mm He 1450 mm Juice pan in 1.4301 / AISI 304 Pressing force 24 to Press pressure 380 bar Juice yield up to 75% connection for juice drain 30mm High juice drain 400 mm Supplied scope of delivery 80x80cm, 20 pressing inserts made of acacia wood 50x50xcm ; New machine - best condition
used
Packing press 180P2 Inox with hydraulic lifting and vertical device Nominal power up to 1200 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2250 mm Width 840 mm He 1880 mm Maximum acceptance 1380 mm Weight 1020 kg Material 1.4301 / AISI 304 Press force 50 to Press pressure 270 - 320 bar Juice yield up to 75% Connection for juice drain 1 1/4 High juice drain 420 mm Scope 22 Pressing tummy 100x100cm + 24 press inserts Stainless steel 65x65cm ; New machine - best condition
used
Little used and is very well maintained, factory No. 3791, in execution with degree - and indirect sharing using disc of part of. Table size 500 mm diameter Height 150 mm Length 710 mm 590 mm width (without drive) T - slot width 16 mm Gear ratio 1: 120 Weight 180 kg Accessories: Part of disc, operating instructions.