We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,485 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Tailstock with quill and moving grain tip CMB TD35/250 Tool holder: MK3 Center height: 250 mm Quill stroke: approx. 100 mm Quill diameter: Ø 45 mm Base: 285 x 125 mm hole spacing: 185 mm hole diameter: Ø 16.5 mm spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 450 x 260 x 310 mm
used
Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm
used
Tailstock with quill and fixed center point PAGUS center height: 110 mm quill stroke: 25 mm quill diameter: Ø 15 mm base: 120 x 118 mm groove width: 14 mm groove depth: 5 mm with mounting screw and 2x slot nut used, checked! Dimensions: 150 x 120 x 127 mm
used
Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock: from Meuselwitz lathe -Tip height: about 300 mm -Recording: MK5 -Measures: see drawing in the photos -Dimensions: 720/300 / H570 mm -Weight: 182 kg
used
Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Ramo a42 lathe -Quill: electrically driven -Motor: 220/380 V 0.18 kW -Spindle stroke: 300 mm -Recording: MK4 -Dimensions: 790/550/H580 mm -Weight: 98 kg
used
Tailstock for lathe, counter bearing for dividing head, dividing head -from: Schaublin 102 -Collet holder: type W25 -Drawing: with the photos -Dimensions: 450/360/H170 mm -Weight: 11kg
used
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 75 - 180 mm adjustable -Recording: MK2 -Dimensions: 275/240/H260 mm -Weight: 22.5 kg
used
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 130 mm -Recording: MK2 -Adjustment of the tip from the center: + - 25 mm -Dimensions: 240/210 / H160 mm -Weight: 7 kg
used
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 90 mm -Admission: -Drawing: in the photos -Dimensions: 140/135/H160 mm -Weight: 4.7 kg
used
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 95-205 mm adjustable -Recording: MK2 -Dimensions: 275/260/H265 mm -Weight: 23 kg
used
Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg
used
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg
used
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 129-131 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 240/120/H150 mm -Weight: 11.3 kg
used
Description: Tailstock Bison type 5819, with adjustable center height, suitable for use with Bison dividing heads and rotary tables, precise adjustment of the height from 170-200 mm possible weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 450 x 250 x 250 mm
used
new parts in original packaging
used
achkettenquerförderer or Auschutisch with pull-off cross conveyor. Chains with roof chain takers. 5 chain strands. Length 5,900 mm. Spread width 2,000 mm. Total width 2,400 mm. Chain spacing: 750 - 750 - 1250 - 2000 mm. Fully plated. Drive via gear motor with 3 KW and adjustable slip clutch. Sprockets with clamping elements. Chain 80 x 40 x 6 mm. Technically reviewed and tested. Trial run possible.
new
Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5 ...
used
Roof centrifugal fan, centrifugal fan, centrifugal blower, centrifugal fan HÜRNER D16-RU250-15e V:. 600 m3/h n max: 1500 rpm Input: Ø 215 mm Output: Ø 240 mm Motor : eKDF 71 B-4 F4 0,0,37 kW 1400 rpm 380 V 3AC IP44 explosion-proof used, tested ! Dimensions: 700 x 650 x 750 mm
used
roof fan, axial fan, axial blower, axial fan, supply air mode, horizontal suction S&P, SOLER & PALAU HCTT/4-500A Product no.: 5113441900 Fan diameter diameter: Ø 500 mm motor: 0,, 85 / 0.5 kW 1350 / 1060 rpm 400 V 3AC 50 Hz IP65 thermoplastic impeller, glass-fibre reinforced plastic hood made of aluminium, seawater-resistant, Ø 900 mm base plate and channel box made of sheet steel, galvanised channel box: 690 x 690 x 310 mm, flange: 875 x 875 mm approx. 3.5 m connection cable with 5-pin CEE plug used, tested ! Dimensions: 900 x 900 x 680 mm
used
Roof fan, vertical, explosion-proof HELIOS VDD 250/4 Ex Item: 07265 / 00 Volume: max. 1280 m3/h 0,12 kW 1400 rpm 400 V 3AC 50 Hz IP45 Fan wheel diameter: Ø 250 mm Flange: 575 x 575 mm Intake opening: Ø 180 mm Output: 350 x 350 mm Control and terminal box type A21-E1-01106 200119 New ! with documents ! Dimensions: 680 x 580 x 320 mm
used
Roofing nails PASLODE 3.1 x 19 mm (3.0 x 19 mm) No. 00X7015 19,000 pcs (2 boxes) wire magazines New ! Dimensions: 510 x 450 x 320 mm
used
Roofing nails PASLODE 3.1 x 25 mm (3.0 x 25 mm) No. 00X7017 18,000 pcs (2 boxes) wire magazines New ! Dimensions: 460 x 500 x 300 mm
used
Fan, fan, electric motor, blower, centrifugal roof fan, emergency ventilation fan, flue gas fan -Speed 1420/1260 rpm -Line 0.13/0.09 kW -Dimensions 670/670/H445 mm -Weight 24 kg
used
Roof window shutters, blinds, roller shutter curtains -Number: 1x roof window roller shutter available -Price: per piece -External dimensions: 1700/480/H180 mm -Net weight: 19.3 kg/piece
used
Fan, fan, electric motor, blower, centrifugal roof fan, emergency exhaust fan, flue gas fan -Speed: 2870-3300 rpm -Power: 0.66/5.0 kW -Volume flow: 14,000/28,500 m3/h -Soundproof -External diameter: 1475 mm -Number: 2x fans available -Price per piece -Dimensions mounting flange: 1160 x 1160 mm -Height: 1310mm -Weight: 412 kg
used
Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners, end clamp -Solar fasteners: roof hooks, -Dimensions: see photos -Quantity: 66 hooks available -Price per piece -Minimum order: 10 pieces. -Transport dimensions: 240/130/30 mm -Weight: 0.4 kg/pc.
used
Rollforming line, for producing trapezoidal metallic pannels T8
used
Thermofin roof condenser, type: TCH 100.1-15-E-N(D5), number: 701849-100-0001, year of construction: 09/2006, 5 fans, dimensions: 9950 mm x 1630 mm x 1500 mm.
We can offer the following paper bag machine for Block bottom / SOS bags: Block bottom / SOS bag machines Producer : Windmoeller & Hoelscher Type : Triumph 3 Year app. 1968 Bag width 120 - 260 mm. Tube length 240 - 900 mm. Bottom width 70 - 150 mm. Max. web width 860 mm. Max. mechanical speed 200 m/min. W&H QMS 992 - 4 colour tail end printer 2 unwinds and glue units for 2 ply bags Still in operation: No Available: Now
used
MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...
used
Piston pump for dosing, type EK 1 H, with batch-control by electric impulse batching counter. Working pressure 7,5 bar, dosing stream 290 l./h max., hose coupling Rd 34 x 1/8 inch with hose tail NW 15, with switchgear, mounted on table.
used
Steel silo volume 25 m3, payload 40 to, net weight approx. 2,500 kg, outlet height 1,300 mm, outlet flap NW 250, 1 injection line, 1 vent line, 1 manhole lid NW 500 in cylinder, 1 manhole lid in the silo roof
used
The Enduro is a joint development of BÖWE SYSTEC and BÖWE BELL + HOWELL, combining proven technologies from both parts of the company: intelligent control and operation as well as modular input components on the one hand, and the proven gripping arm technology, on the other hand. With up to 11,000 envelopings per hour, the Enduro is used in the medium power segment. A wide range of applications, the convenient operation and easy accessibility of all modules are the highlights of the system. This covers the entire processing spectrum from classic invoicing to a wide range of advertising broadcasts. With the COMPACT, BÖWE SYSTEC offers a space-saving, solid yet versatile enveloping system in the performance class up to 7,200 envelons per hour, which can be tailored to a wide range of requirements. Thus, it is equally suitable as an entry-level model for daily post- ...
used
Cat. No. 11-1040 New For liquid with a density of 1350 kg/m3 Material: V2A - AISI 304, 1.4301 Surface: Ground Upper and underbody: Klöpperboden Cylinder body: with flange DN 100 with sight glass with rupsing disc with CIP line with spray head through. 90 mm made of V4A with cable for spunding machine DIN 40 with side manhole 509 x 372 mm with low-screw shut-off valve for residual and clear drain with digital thermometer with residual drain line through m. 2"1/2 with ladder bracket with transport eyelets height-adjustable with 4 calotte feet Technical data Dimensions (mm) Total height inside: 1592 mm Dia. inside: approx. 4600 mm Total height outside: 4605 mm Dia. outside: --- Roof 426 mm height 3.0 mm thickness Cylinder 3000 mm height 2.5 mm thickness Underbody 426 mm height 3.0 mm thickness Feet 600 mm hei ...
used
Steel silo type CB 3000, volume 3 m3, payload approx. 4.8 tons, net weight approx. 700 kg, outlet height 1,000 mm, outlet flap NW 250, 1 injection line, 1 vent pipe, 1 manhole lid NW 500 in the roof, 1 manhole lid NW 500 in cylinder, 1 riser ladder, 1 stand platform, forklift sphotos and crane eyelets.
used
Mini-silo type CB 1000, volume 1 m3, payload approx. 1,600 kg, net weight approx. 290 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid NW 500 in silo roof, crane eye and forklift holder
Ladies and gentlemen, we offer: Machinery and equipment for the production of roof tiles, Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and load ...
used
Heavy duty centre lathe KRAMATORSK model 1A670 Manufacturer: KRAMATORSK Condition: good, complete Machine is just dirty, we will clean it, and paint it. Technical details: Tail stock taper 120mm diameter of hole in the spindle 80mm diameter of spindle's taper 120mm chuck diameter is 2000mm bed width is 2240mm Swing over bed 2000 mm Swing over carriage 1600 mm Max distance between centres 10 000 mm Centers hight 1060 mm Max workpiece weight 63 000 kg Spindle hole 80 mm Spindle cone (1:7) 120 mm Tail stock cone (1:7) 120 mm Spindle speeds range ( stepless ) 1-125 rpm Carriage feeding longitudinal 0.19 - 32 mm/rev Carriage feeding transversal 0.076 - 12.8 mm/rev Carriage rapid feeding 3100 mm/min Threading metric 2-96 mm, inch 12-3/8 tpi Main motor power 100 kW Installed power 112.5 kW Dimensions 17720x3840x2850 mm Machine weight 105 000 kg
used
Trapezoidal sheets - RAN 35/207 for roof and wall from 5,70 / m² (net) Profiled sheeting produced steel profiled sheets to measure! In thickness 0.50 mm (similar to RAL 3009) and a minimum order quantity of 1001,00 m², with us, get special items produced to measure. At a quantity up to 100.00 m² (sheet thickness 0.50 mm) = 6,23 / m² (net). At an additional cost of 2.22 m (net) get m² us also with Antikondensbeschichtung (anti drip coating/nonwoven coating). Prices for corrugated sheets as special items to measure direct from the manufacturer Special items Checkout, payment & pick up/delivery Only our terms and conditions, available at abc.ranrode.com, are based on our offer. We again expressly please indicate that our offer includes no technical editing (auditable statics, laying, color concepts, etc.). Therefore, we advise to statically verify our offer befor ...
used
Mini-silo type Piccolo 1.2, volume 1.2 m3, payload approx. 1,600 kg, net weight approx. 300 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid NW 500 in silo roof, crane eyelets and forklift holder
used
Mini-silo type Twinleg, volume 1.2 m3, payload approx. 2,000 kg, net weight approx. 390 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid in the silo roof, crane eyelets and forklift holder.
used
Workspace tip height 102 mm centre distance - with normal headstock with 450 mm - reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm spindle poles spindle nose for collets type Schaublin W25 spindle bore 25 mm collets passage 20 mm reduction ratio of 1:5 Raedergetriebes cheek height x width x length 168 x 130 x 1000 mm cheek from cast iron, trapezoidal profile as lathe 102 N and dovetail, hardened and ground. Sledge greatest way on the cheek width 400 mm runner - length 90 mm top runner above 80 194 mm way manual adjustment 20 mm shank of tools 12 x 12 mm cross slide width length 94 300 mm way manual adjustment 100 mm bed slide length of leadership on the cheek 250 mm screw lead screw for longitudinal turning and threading, Ø 40 mm screw hardened, Ground thread, slope 4 mm speed range RPM 270 3000 rpm turning 0.02 0.3 mm / Rev. Tapping largest slope ...
used
Steel silo type CB 3000, volume 3 m3, payload approx. 4.8 tons, net weight approx. 700 kg, outlet height 1,000 mm, outlet flap NW 250, 1 injection line, 1 vent pipe, 1 manhole lid NW 500 in the roof, 1 manhole lid NW 500 in cylinder, 1 riser ladder, 1 stand platform, Forklift sphotos and crane eyelets
used
Centre height 135 mm Top width 630 mm The bed diameter 315 mm Permissible diameter into the spindle bore 40 mm 45 Speed 3000 rpm Feed 0.015 0.35 m / h Inner taper spindle / tailstock MK 5 / MK 3 Weight 1150 kg
used
Cheap LAGERCONTAINER 10 feet (3m) ideal as a material/storage container from location DE-83395 Freilassing Delivery at extra cost ! DESCRIPTION / SPECIFICATION Factory-new storage containers in robust and stable design. Welded steel frame made of wood and rolled profiles with corner fittings, stackable. The floor construction consists of steel beams with welded cross beams and a covering made of 28 mm thick, water-resistant glued plywood. The walls were made of a profile plate with a thickness of 1.5 mm and are welded to the frame construction. The roof skin consists of a 2.0 mm thick profile plate. Container doors are equipped with a double lip seal and rotary rod closures. Each container has anti-theft protection and forklift bags. TECHNICAL DATA / TECHNICAL DATA Dimensions outside: length x width x height: approx. 2,991 x 2,438 x 2,591mm Dimensions inside: length x wid ...
used
Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!
used
approx. 30 m ³ / 30,000 liter tank PE-plastic tank / double-walled flat bottom tank Excellent condition - storage tank for liquid feed, whey, molasses, water, seeping juice, certain chemicals, etc. Content: 30 m³ / 30,000 litres Internal dimensions: approx. Ø 3,00 dimensions: approx. Ø 3.40 x 4.30 m high Operating pressure: pressure-free Details: double-walled, non-translucent, various connections such as ventilation, inlet, outlet, etc., domed lid on top of the roof, level indicaton by a plastic tube attached directly to the tank Matrial: PE-HD or HDPE (high density polyethylene) Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a simila ...
used
Accessories available. Main data: Distance between top 400 mm Centre height 100 mm Table: Längsverfahrweg of Max 420 mm Kontinulerliche process speed up to 5 m / min Reverse stop at 4 sec Angle 9 ° Grinding spindle stock: Wheels Ø 300 mm Grinding width at Ø 300 up to 50 mm Grinding width at Ø 450 up to 80 mm Grinding wheel hole with Ø 300 127 mm Grinding wheel hole with Ø 450 203 mm Continuous feed up to 0.8 mm / Ø Work piece headstock: Taper Mount MK 4 Orientation 360° Continuous speed regulation 65 500 U/min Tailstock: Inner taper of Quill MK 3 Adjusting spindle stroke 20 mm Dimensions: 2020 mm Width: 1200 mm Height 1350 mm Net weight 1100 kg
used
BRICK FACTORY, RED BRICK, CLAY BRICK PLANTS - second hand, used, We offer also DE montage and Montage. Also control renewing. Porenbetonwerk, Kalk Sandstein Werk, Dachziegelwerk, Ton Ziegelwerk, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Clay brick plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at
new
Wood Turning Lathe Precision device for professional users, with grey cast iron variable speed control high degree of spindle concentricity Spindle can be fixed all 15° LCD speedometer One hand operation of the tailstock and tool rest with quick-release mechanism Voltage: 230V / 50 Hz Engine power: 735W (S1 100%) Tip height: 160 mm Top width: 510 mm Speed ranges: 250-750 m-1, 550-1650 min-1, 1300-3850 min-1 Spindle stock rotation: 180 degrees Headstock thread: M33 DIN800 Morsekonusaufnahme: MK2 / MT2 Quill stroke: 63 mm Weight: 52 kg Dimensions: 1035 x 305 x 449 mm G & HM-D510F