roll cutter used for sale

Year: 2007 - technically efficient, ready to work (after full service) - 3-spindle (high-speed motors) - possibility of setting for various profiles (frame / sash) - pneumatic profile clamping

Vertical milling machine SPECIFICATIONS: Spindle milling machine: Ø 25 mm Speed: 12000 rpm Installed power: 2.2 kW ACCESSORIES: 3-roller drive with speed controller

- Krämer + Grebe frozen meat block grinder - Fresh and frozen blocks down to -25°C - Model: AutoMincer 200 - Type: AM 200 - Power: 57 kW - 400 V, 50 Hz - Screw diameter: 200 mm - Mill dimensions (L x W x H): 1500 x 2400 x 1850 mm

Counter profile cutter head HUMPH G&-5041-M31MC VAT not deductible! Special price: net 120,-€

Oppold Gluing cutter D= 120mm x 59mm x 30mm HSS G&-5043-M31MC VAT not deductible! Special price: net 120,-€

Year of construction: 1985 7 drilling spindles adjustable drill spindle spacing incl. base electr. Drive electr. Foot switch Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Hydr . Flat profile and bar steel shears with notching device and hole punching Specifications: - Flat steel shears cut up to 375 x 10 mm - 220 x 20 mm - Profile steel shears - cuts L-steel at 90° to 130 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device - with square notching device 100 x 42 x 10 mm - Hole punch - punching force 600 KN - with stop table - Projection 300 mm - perforated in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Offer 22562 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 500 x 18 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 120 x 13 mm - at 45° 90 x 10 mm - Round steel 45 mm - Square steel 40 mm - Notcheter - With square notch for sheets up to 13 mm - Jack width / depth 65 / 85 mm - With triangular notch for sheets up to 13 mm - Notch depth 70 mm - Hole punch - Punching force approx. 80 t - Projection 510 mm - Stroke approx. 10 to 29 mm - perforates in steel up to 39 mm Ø in 16 mm - perforates in steel up to 30 mm Ø in 20 mm - Stroke rate at 20mm hole. / Scissors 30 / 20 1/min - E. contact stop - various punches + matrices - Drive 400 V / 7.5 kW - Dimensions W 900 x H 1800 x D 1800 mm - Weight approx. 2600 kg ...

KARL SCHNELL KS ultra-fine shredder Type: FD 225 2 plate system with handwheel adjustment Engine: 90 kW Completely overhauled

Milling machine for connecting drawers OMEC 750 The machine is designed to make connections min. drawers, boxes The operator sets two components at the same time, then the machine Automatically mills along the entire length Spindle on eccentricity Milling motor power 1.1 kW Spindle speed 18000 RPM Two speeds of 25 and 35 n/-1 Machining parameters: Front thickness: min/max: 7/60 mm Sidewall thickness: min/max: 10/30 mm Key height: min/max: 6/18 mm Machine dimensions: 1300x700x1200h mm Machine weight: 400 kg

Vacuum cutter Alpina PBV 330-1110 DC Manufacturer Switzerland Year of production Overhauled Technical data overall dimensions 3300x2600x2450 mm; bowl 330 ltr; power supply 400 V, 50 Hz; total power 115 kW / 150 A; knives speeds 550/975/1950/2500/3200/4100 rpm, main motor 103 kW DC; bowl speeds 4/8/12/16 rpm, bowl motor 1,2 kW; mixing speeds 65/130 rpm, hydraulic system 5,5 kW; loader; unloader; vacuum pump Busch 250 m3/h, 5,5 kW; weight 5600 kg.

Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions

Specifications: Cutting performance Max. round bar diameter: 36 mm Max. thickness of the square bar: 30 mm Max. flat steel thickness: 200 mm Stroke rate: 45 1/min Weight, approx.: 1760 kg Dimensions (LxDxH), approx.: 2300 x 850 x 1550 mm For further technical data, see pictures. Equipment: Device for cutting : - Round rods - square rods -Strap iron -Angles - T-profiles - Corner profiles - for hole punching

Max. punching and shearing capacity: 1000 kN Receptacle for hole diameters up to 90 mm Punches 31 mm holes in 25 mm steel Shears on the flat steel shears to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of punches and dies as desired Weight: approx. 3,000 kg

73 cms cut off Hydraulic Infrarred security guards Digital program with 100 programs Touch screen Side tables Air table

WEINIG Rondamat 912, S/N 912-497 – fully automatic tool grinding machine • Automatic re-sharpening of straight planing knives in the cutter head with conventional or hydro-clamping • Automatic resharpening of cutters in the hydroplaning head (in front of the chest) • Automatic dividing head for up to 36 cutting edges • concentricity tolerance of less than 0.005 mm • Integrated coolant device • Table feed infinitely variable (forward / return) • Easy operation via membrane keypad and digital displays Specifications • Grinding mandrel D=50 mm • Planer head diameter min. 80 mm to max. 280 mm • Grinding length max. 260 mm • Table stroke 500 mm • Programmable knife count from 2 – 36 • Programmable grinding cycles per tool 1-9 • Clearance angle infinitely adjustable 15° – 35° • Axis angle max. 15° • Grinding spindle speed n=4,600 r ...

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 138 mm -Height: 25 mm -Socket: Ø 30 mm -Number: 1 cutter -Screwed saw blade: 140 x 4 mm -Price: complete -Weight: 2.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 150 mm -Height: 20 mm -Socket: Ø 30 mm -Number: 1 cutter -Price: complete -Weight: 2.2 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 125 mm -Height: 30 mm -Socket: Ø 30 mm -Number: 1 cutter -Price: complete -Weight: 2.2 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 125 mm -Height: 40 mm -Socket: Ø 30 mm -Number: 1 cutter -Price: complete -Weight: 2.2 kg

End mills, end mills, milling cutters, groove milling cutters, wood milling cutters -Double cutter -Roughing and finishing cutter -4x: cutter Ø 4 x12 mm -7x: cutter Ø 5 x 12 mm -10x: cutter Ø 6 x 14 mm -1x: cutter Ø 8 x 20 mm -5x: milling cutter Ø 10 x 20 mm -4x: cutter Ø 11 x 22 mm -3x: cutter Ø 12 x 22 -Take: Ø 10 mm -Type: M623 -Number: 34 pieces -Sale: only completely -Weight: 3.6 kg

Cutter head, milling adapter, hard metal milling cutter, indexable insert milling cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Inserts: hard metal -Adjustment: SK50 -Weight: 4.5 kg

Plate cutter, composite stone cutter, stone pincers, plaster stone pincers -for effortlessly cutting slabs and composite stones to length through the translation of the eccentric lever -great stability with low weight -exact guidance of the cutting knife -pendulum suspended upper knife for cutting materials that have a conical cross-section (curbs) -Max. for 6 cam stones -Own weight: 10 kg

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Cloth cutter Make Kolbus Model KS Year 1969 Min-max working width 50 - 1400 mm Min-max working length 10 - 1050 mm Speed 14-36 cycles per minute Cutting directions longitudinal & transverse cutting Materials Products to be cut include calico, linen, synthetic leather, wax cloth, gauze, PVC and other Available direct

Threadcutter ROLLER KING Type: 847 220 V Adapter for smaller than 2 are missing ! Dimensions: 480 x 120 x 190 mm

Ratchet thread cutter with 6 cutting heads RIDGID D 286 30118 with cutting heads 12-R 1/2, 3/4, 1, 11/4, 11/2, 2 very good condition ! Dimensions: 750 x 300 x 110 mm

Plasma cutter SAF nertaZIP 520 04808 - 2300 Cutting capacity: max 20 mm 3~ 220 / 380 V Cutting gun with 5 m cable Dimensions: 500 x 750 x 1000 mm

Tool holder for threaded screw-in milling cutter, 3 pieces POKOLM 2x 75 12 750 100 12 750 SK 40 thread M12 usable length: 2x 75 / 100 mm conical design inner coolant supply used, tested ! Dimensions ( single tool holder ): 163 / 188 x Ø 64 mm Dimensions ( packed ): 250 x 140 x 70 mm

Tool holder for threaded screw-in milling cutters, 4 pieces POKOLM 2x 50 12 750 ZYL 75 12 750 ZYL 100 12 750 ZYL < br /> SK 40 Thread M12 Usable length: 2x 50 / 75 / 100 mm Cylindrical design inner coolant supply used, tested ! Dimensions ( single tool holder ): 138 / 163 / 188 x Ø 64 mm Dimensions ( packed ): 280 x 140 x 70 mm

Tool holder for threaded screw-in milling cutters, 3 pieces POKOLM 50 16 750 75 16 750 100 16 750 SK 40 thread M16 usable length: 50 / 75 / 100 mm conical design internal coolant supply used, tested ! Dimensions ( single tool holder ): 138 / 163 / 188 x Ø 64 mm Dimensions ( packed ): 260 x 140 x 70 mm

Tool holder for threaded screw-in milling cutter, 2 pieces POKOLM 75 16 750 100 16 750 SK 40 thread M16 usable length: 75 / 100 mm Conical design inner coolant supply used, tested ! Dimensions ( single tool holder ): 163 / 188 x Ø 64 mm Dimensions ( packed ): 250 x 120 x 70 mm

Tool holder for threaded screw-in milling cutter, 3 pieces POKOLM 25 16 750 ZYL 75 16 750 ZYL 100 16 750 ZY SK 40 Thread M16 Usable length: 25 / 75 / 100 mm Cylindrical design internal coolant supply used, tested ! Dimensions ( single tool holder ): 112 / 163 / 188 x Ø 64 mm Dimensions ( packed ): 250 x 140 x 70 mm

Tool holder for threaded screw-in milling cutters POKOLM 250 16 750 SK 40 thread M16 usable length: 250 mm conical design inner coolant supply used, tested ! Dimensions: 338 x Ø 64 mm Dimensions (packed): 350 x 70 x 70 mm

Tool holder for threaded screw-in milling cutter, 3 pieces POKOLM 2x 75 10 750 100 10 750 SK · 40 thread M10 usable length: 2x 75 / 100 mm Conical design internal coolant supply used, tested ! Dimensions ( single tool holder ): 163 / 188 x Ø 64 mm Dimensions ( packed ): 250 x 140 x 70 mm

Tool holder for threaded screw-in milling cutter, 2 pieces POKOLM 50 08 750 ZYL Cylindrical design 75 08 750 Conical design SK 40 thread M10 usable length: 50 / 75 mm inner coolant supply used, tested ! Dimensions ( single tool holder ): 138 / 163 x Ø 64 mm Dimensions ( packed ): 200 x 110 x 70 mm

Fräser, H, schl. Zahnst. Group cutter FETTE K HSS E ( KHSSE ) Modul 0,8 EW 20° DIN 3972 BP I

Wood cutter, adjustable WMW VWF 35 - 01 ( 35-01 ) n 6000 rpm 220 x 50 x 35 links New ! Dimensions: 250 x 250 x 150 mm

Wood cutter WMW VWF 35 - 01 ( 35-01 ) n 6000 rpm 220 x 50 x 35 right New ! Dimensions: 250 x 250 x 150 mm

worm gear cutter KLINGENBERG Type A 6517 C01S HF.9.432 bore Ø 32 mm New ! Dimensions: 70 x 70 x 60 mm

worm gear cutter KLINGENBERG Type A 6519 C01S HF.9.432 bore Ø 32 mm New Dimensions: 70 x 70 x 60 mm

Cutter mandrel, tool holder WMW 4 x 30 x 200 ( 4x30x200 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 30 mm New ! Dimensions: 490 x 50 x 50 mm

Cutter mandrel, tool holder, with tightening thread WMW, VWF 40 x 40 x 315 ( 40x40x315 ) SK40 Tool holder: Ø 40 x 315 mm used, tested ! Dimensions: 485 x 63 x 63 mm

Cutter mandrel, tool holder, with tightening thread WMW, VWF 40 x 32 x 315 ( 40x32x315 ) SK40 Tool holder: Ø 32 x 315 mm used, tested ! Dimensions: 478 x 63 x 63 mm

Cutter mandrel, tool holder, with tightening thread WMW, VWF 40 x 27 x 315 ( 40x27x315 ) SK40 Tool holder: Ø 25 x 315 mm used, tested ! Dimensions: 473 x 63 x 63 mm

Cutter mandrel, tool holder, with tightening thread WMW, VWF 40 x 27 x 315 ( 40x27x315 ) SK40 Tool holder: Ø 25 x 315 mm used, tested ! Dimensions: 473 x 63 x 63 mm

Pipe cutter with accessories STAHLWILLE EXPRESS 150/3 pipe diameter: 3/4 - 3 accessories: 6 scoring wheels 4 guide rollers used, tested ! Accessories unused ! Dimensions: 500 x 140 x 60 mm

Pipe cutter for thin-walled, stainless steel pipes, copper pipes and others ROLLER, S CORSO Cu/INOX 113380 pipe diameter: 6 - 42 mm used, tested ! Dimensions: 180 x 70 x 35 mm