rim roller used for sale

sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

v.v. CNC control system; foot pedal; remote control; Hydraulically adjustable

Manual

Equipped with "Elektra Beckum" SPA1700D extraction unit 230v; "Emmegi" Fermo V18 C3780 discharge roller bench 300 x 3450 mm (transport size: 570 x 4100 mm 180 kg) with digital counter; 16A 5-pin socket (50Hz); protective cover; up to 130 mm square cutting range; Saw cooling

Roller conveyor on wheels dimensions 60x40cm. SysTec IT1000 weighing system.

Roller conveyor on wheels dimensions 60x40cm. SysTec IT1000 weighing system.

Table dimensions: 1400x4000mm, feed rate: 2-16m/min, length: 4500mm, width: 10,500mm, with documentation.

Machine bed length: 16,000mm, roller table diameter: 200mm, load: 150kg/m, band width/ length: 150/ 3500mm, with documentation, the machine needs overhauling.

Working width: 1030mm.

Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.

Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm.

Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012.

Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.

Working width: 3000mm, max. sheet thickness: 15mm, with digital display of roller adjustment, driven rollers, mobile control panel, cone bending device, upper and lateral cylinder support device.

Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls.

Working width: 2500mm, max. sheet thickness: 20mm, with optical display of roller adjustment, central lubrication, cone bending device and overrun brake.

Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024.

Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible.

Eroding diameter: 100-420mm, max. roll length: 2500mm, roll weight: 8t, eroding length: 11mm, number of electrodes: 60, length: 5000mm, width: 2000mm, height: 1200mm, weight: 25t, with documentation, inspection is possible.

Feed length - 0.1 - 6500 mm Width 20 - 300 mm Belt thickness 1.0 - 3.0 mm Material Quärschnitt 500 mm2 motor - 2,2 kW Complete documents more info on request

Manufacturer: Festo Machine Type: RSTC-U W40/7/500GL Overall size: 1600 x 900 x 1800 mm Plate width: 500 mm Number of castors: 6 Voltage: 380 V

Roller width: 2400mm, product width: 2200mm.

Roller diameter: 250mm, roller length: 1000mm, suitable for grist, without the motor.

Length: 6025mm, width: 3270mm, height: 2000mm, weight: 2.2t, with documentation, without accessories or spare parts, suitable for foam, for dosing, gluing and spreading, has been serviced regularly.

Max. working width: 1200mm, clear span: 70-150mm, table dimensions: 1700x1400mm, working height: 850mm, roll diameter: 250mm, connected load: 2.2kW, weight: 800kg.

sheet width: 3000 mm plate thickness: 12 mm pre-bending: 10 mn number of rolls: 4 Walzen diameter of upper rolls: 320 mm roll diam. bottom roll: 250 mm speed: 1,5 - 5 m/min total power requirement: 20,0 kW weight of the machine ca.: 13,05 t dimensions of the machine ca.: 5,9 x 2,05 x 1,85 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. operating temperature: 1270°C, roller dimensions: 45x35x2350mm, roller distance: 60mm, min. format: 150x150mm, working width: 1200mm, length: 80.000mm, including documentation.

Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation.

Max. pallet dimensions: 1200x800x2400mm, max. load: 260kg, roller diameter: 50mm, length: 12,000mm.

There are 190 identical floor rollers available, length: 611mm, width: 410mm, height: 195mm, edges deburred, recesses for stackability of the floor rollers, threaded press-in bolts M8x35, spacer sleeves, with handle bar.

properties: Used pallet conveyor Condition: Used Material: Steel (galvanized) Expertly dismantled and packaged 22.5 meters in stock Price per meter specifications Dimensions pallet roller conveyor approx. System consists of 22,500mm and 9 segments Total length of one segment: 2500 mm Total width: 955 mm Clamping length: 855 mm Center distance: 130 mm Roll cross-section: 60 mm Material: steel, galvanized Frame height: 80 mm Pallet roller conveyor Due to the excellent processing of the pallet roller conveyor, your material glides gently to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assem ...

properties: Used pallet conveyor Condition: used with rust Material: Steel (galvanized) Color: gray Expertly dismantled and packaged 51.87 meters in stock Price per meter specifications Dimensions pallet roller conveyor approx. Total length of the system: 51.870mm Total length of one element: 2470 mm The plant consists of 21 elements Total width: 945 mm Clamping length: 850 mm Center distance: 130 mm Roll cross-section: 60 mm Castors of the manufacturer: Interoll Material: steel, galvanized Frame height: 70 mm Pallet roller conveyor Due to the excellent processing of the pallet roller conveyor, your material glides gently to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your  ...

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine in working condition

filling capacity: 800 kg max. workpiece height: 900 x 300 mm workpiece weight: total 500 kg container volume: 878 l max. workpiece weight: 30 kg/Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1175 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workp ...

Gluing station Prakma 105 top gluing Pressing station Prakma 105 2 roller pressing Optional can be bought "as it is" or refurbished, can be sold as stand alone units, with mounting table or with (vacuüm) belt to mount on

properties: Used roller conveyor Very stable design Feet to order separately Drive Type: Gravity without motor Condition: fully functional with signs of use Ideal for fast material transport Expertly dismantled and packaged Price per meter specifications: Dimensions of the roller conveyor Total width approx.: 800 mm Total length: 24.000mm Roll width: 740mm 7 segments with plastic rollers 1 segments with steel rollers Role Details Roll diameter 50 mm Axis spacing: approx. 75 mm Information on the frame Height: 120mm Width: 25mm Roller conveyor The roller conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the roller conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or ...

properties: Used roller conveyor Very stable design Feet to order separately with motor Condition: fully functional with signs of use Ideal for fast material transport Expertly dismantled and packaged Price per meter specifications: Dimensions of the roller conveyor Manufacturer: Costo Total width approx.: 800 mm Total length: 9.820mm Roll width: 740mm 2 segments length: 3.000mm 1 segment length: 3.820mm Role Details Roll diameter 50 mm Axis spacing: approx. 75 mm Information on the frame Height: 120mm Width: 25mm Roller conveyor The roller conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the roller conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point ...

Angle conveyor (roller-chain) - galvanized rollers - stainless steel chain - working length of the roll: 730 mm - roll diameter: 50 mm - lifting on chains: B08-1 - spacing between chains: 145 mm - number of chains: 5 - construction: stainless steel - includes 2 geared motors: - for rollers – SEWUSOCOME; 0.25 kW; 1300/77 rpm - for chains – SEWEURODRIVE; 0.25 kW, 1300/77 rpm

Roller trestles roll bed Manufacturer: PEMA / ESAB Type: 3 TXA / 3 TXN (1 unit) Year of construction: 2008 Load/section max.: 1.5 tons / 1.5 tons Maximum force F: 3 kN Rolling speed range: 60 – 1200 mm/min. Fixed center height: 434 – 800 mm Total diameter range min-max.: 106 – 2179 mm Steel rolls piece/section: 2 pieces Roller diameter / total width: Ø 350 / 80 mm Mains voltage: 230 V – 1 Ph – 50 Hz/16 A Length: 1690 mm / 1445 mm Width: 670 mm / 570 mm Height: 615 – 878 mm / 610 – 878 mm Weight: 480 kg / 420 kg Remote Control / Cable Length: RC31H / 6m

BOMAG BW 200 Roller / Pneumatic Compactor, 7 to, 4 Zyl Deutz Motor, Vibration full working, German Machine, Year 1977

BOMAG BS 180 Grit Spreader for Roller / Grit Spreader Sprayer for Compactor, Grit Spreader & Hydraulic Arm, Year 2008

: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 660 - 815 mm Colour: blau / rot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GARLAND ROLLERS for tape width 800 mm Rollers with dimensions: 315 mm L x 108 mm ∅ Price €28 per piece 1200 units In stock

GARLAND ROLLERS for tape width 1200 mm Wheels with dimensions: 465 mm L x 133 mm ∅ Price €36 per piece 300 units In stock

1 batch of rollers for roller gear Rollers with dimensions: 500mm x 89mm SW 14 Price : €11 each 2200 pieces in stock.

50 pieces roller conveyor Length 2200-3000 mm Width 500 mm

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut fig.: approx. 380 x 60 x 50 mm Mounting plate abm.: approx. 140 x 135 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 275 mm Frame width: approx. 245 mm Minimum height: approx. 660 mm Maximum height: approx. 900 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut abm.: approx. 180 x 60 x 50 mm Mounting plate abm.: approx. 140 x 220 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized