rh used for sale

Socomec long belt grinding machine (Ref. No. 279-2664) Table size: 2400 x 1200 mm Lifting height: 450 mm Hubart: Electronic Sandpaper: 6900 mm length Suction: 2 pieces left and right The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Sealing punch Deventer (Ref. No. 160-2665) for window seals Cutting width 30 mm L x W x H: 150 x 250 x 200 mm Weight approx. 3 kg The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Gasket welder (Ref. No. 160-2667) for window seals Welding width 40 mm 220 volts L x W x H: 250 x 300 x 100 mm Weight approx. 3 kg The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Circular table saw Elmag with sliding table The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Parcel scale, spring scale up to 25kg – used- : Price from location: 100.-€ (net)! Manufacturer: unknown Year of construction: still needs to be clarified Up to 25kg Section: 50gr. Condition: good Available: now Location: Rhine / Main, later Frankenberg camp / Saxony

Gas-powered film shrinker, rollable, Ripack – second-hand - : Construction site price for pick-up this week from location: 5.500.- € (net), dismantled, packed and loaded! Later price from warehouse Frankenberg/Saxony: 5.950.- € (net), dismantled, packed and loaded! Manufacturer: Ripack, FR Type: Turbopack Year of construction: 2010 Gas: Propane Connected pressure: 3 bar Weight: 110kg Max. shrink height: 220cm Nominal heat load: 190kW Connected load: 163,400 Kcal Condition: good Available: immediately Location: Rhein Main / later Frankenberg / Saxony

Long belt sander Motor 4 kW Professional machine, runs perfectly, in good condition, ready for operation Sold due to lack of space Transportation by buyer Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Head machine for special square rolls Model: Mini-Rustica GS, with guillotine and punching device incl. 2 longitudinal cutting rollers 3 and 4 rhg. Belt flour for infeed conveyor LED control, Stainless steel Ribbons NEW Machine mobile with brake Connection 400V, 16ACEE plug Dimensions: 1740 x 815 x 1650 mm, WxDxH Machine is cleaned and workshop inspected with 6 months warranty

Moulding machine / milling machine Olma for profiles 2 spindle 30 + 45 mm High-speed locking The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Band Saw Reiden heavy-duty version The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Dressing thickness planer Duco ADM 65 comb. Planing width 650 mm Planing thickness 220 mm 2 knives Tersa Wave Articulated Pressure Roller Length dressing table foldable 2300 mm 8.5 hp The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Profile milling machine Guillet OFP Shaft 40 mm with glazing bead cutter Table 1200 - 750 mm Extraction 120 mm, Lateral extension from 2200 mm Auto. Defective positioning Engine Brake The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Frame Press Hess 3000 - 1750 mm pneumatic The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump, radial piston pump -Double hydraulic pump: radial piston pump with clutch -Pump: unfortunately no exact type designation -Part No.: A3918 2 515 105 780 -Clutch: Kupplungstechnik Rheine PL 350/15/ -Dimensions: see photo technical. drawing -Dimensions: 730/470/H470 mm -Weight: 164 kg

Double mitre saw Elumatec DG 79 3000 mm with E 255 1 x stationary 1 x mobile Available from the end of November 2023 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

corner joining press Elumatec EP 120 incl. support arms + tools Available from the end of November 2023 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder -Manufacturer: rhymes, tool grinder -Type: unfortunately not known -Motor power: 0.37 kW -Grinding discs: Ø 100 mm -Coolant system: separately, dim. total 400/350/H490mm -Accessories: incl., see photos -Dimensions: 860/700/H1560 mm -Total weight: 440 kg

Starter, starter, diesel engine, propulsion engine, marine diesel, diesel generator, diesel generator -Manufacturer: Behr, thermostat regulator insert from power unit MWM RHS 518V16 -Type: Behr X2 350.68.110 / WMW 26.150-156.4 -Dimensions: Ø73 x 110 mm -Weight: 0.5 kg

Gear motor, electric motor, electric gear motor, three-phase synchronous motor -Manufacturer: Sew-Eurodrive, gear motor servo motor -Gearbox: Type KHF47 / A 11 rpm i 131.87 -Motor: Type CMP71S / PK / RH1M / SM1 -Speed: 0 - 2000 rpm -Construction: B5 -Hollow shaft: Ø 35 x 175 mm -Protection class: IP 65 -Dimensions: 600/205 / H210 mm -Weight: 33 kg

Edge sanding machine Kündig LBK 160 mobile Rotary table for extraction various ribbons The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Veneer press Bürkle 310-1931 2500-1300 Plans and documents available The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Veneer splicer Kuper FM Mini 630 T The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Veneer cutting machine long fence LZ 2 Cutting length 3050 mm Height 45 mm Tension beam via manual control valve with compressed air The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Chip extraction Schuco Fan and filter Loading capacity 9800 m3 Filter old 115 m2 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Drill-Press-Automat Grass Pot hinge bore The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Column Drill Ayen mobile Branch Flick Head Drill head for window olives Extension for drill chuck Stops on both sides Depth gauge The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Brewery brewhouse 1200 l. A complete brewery plant from a home brewery in North Rhine-Westphalia for sale. If you are interested, we will be happy to send you a list.

Grunwald line no. I, buckets 3l, 5l, 10l, from point 10: 1 Station for manual feeding of buckets 2 Dosing station 3 Welding and cutting station 4 Device for applying lids 5 Pressing station 6 Bucket collection station The machine is adapted to the specific requirements of working in wet conditions. All drives are built into the machine body in a covered manner, under the table plate. The machine body is covered on the sides with transparent safety glass panes. The body, table plate and all stations mounted on it are made exclusively of stainless steel or anodized aluminum. The drum motor moves the plate conveyor and the product-safe bucket conveyor in rhythm. All driving movements of the stations are performed using cam and lever mechanisms as well as pneumatic actuators. The work and drive area has been designed in a clear and practical way. This area is protected on all side ...

Crane traverse, Wewira, 3 to. –used-: Price from location: 6.500.-€ (net)! Manufacturer: Wewira Type: Compensating truss Year of construction: 2022 6.000mm 6 hooks Load capacity: 3,000kg Original price, 7.800.-€ (net) Condition: very good - basically unused! – classic bad buy! It's just a bit dusty at the moment! Available: now Location: 79206 Breisach am Rhein

Scissor lift table, Bolzoni, 3 to., platform: 1.500 x 1.000mm– used- : Price from location: on request / against bid! Manufacturer: Bolzoni Auramo Type: A130A010020W Year of construction: 2011 Load capacity: 3.000kg Weight: 540kg Operating pressure: 140 bar Stroke: 850mm Platform: 1,500 x 1,000mm Retracted height: 350mm Motor: 2.2 kW The lift table does not have a control unit, customer has used the table within a production line Condition: good Available: now Location: 46414 Rhede

Gallus EM 280, 2003(5) Unwinder Web guide 5 Flexo 5 GEW Rhino (new 2018) 5 hot air dries Rail Turning cross 2 Rotary punch Grid take-off Video Control Hoist and crane Sheeters Unwinding station Conveyor belt Takeup

Long belt sander Hunziker (Ref. No. 517-2697) Format: 2.5 x 1.2 m L x W x H: 5.0 x 2.0 x 1.7 m Weight approx. 480 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Used rotary adhesive labeling machine PE Universal 16T up to 6000 bph In the bottling industry the efficiency and precision that the Used Adhesive Rotary Labeler PE Universal 16T brings to the production line are paramount Introduced by P E Labellers this rotary adhesive labeling machine known by its model number UNIVERSAL 16T 1120 4S 4E was launched in 2005 and has since established its reliability and performance consistency notably handling up to 6000 bottles per hour bph Sophisticated Design Capacity Constructed for glass containers particularly with formats supporting 1 0 L the robust design reflects its capacity to sustain high volume production workflows With its 16 plates functionality the rotary adhesive labeling machine ensures uniform application and distribution of work a technical detail that resonates well with experts seeking minimal downtime and maximum throughput The mac ...

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 250mm for power chucks on request Manufacturer: (SMW Autoblock; SCHUNK; KITAGAWA; REISHAUER) Base jaws in good functional condition: KNCS250; QJ310; RHU250; THW; Schunk-Rota G250 Base jaw type: Helical toothing Metrics: Width: 26 mm Length: 104mm Height: F-groove: 12mm Bridge: 20mm Hole spacing: 40mm Thread: M12 Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

General SKU365U988 LocationBarneveld MakeFryma AG Rheinfelden TypeVME-20 No.F70.4795 Year of construction1980 Pressure Working pressure2.5 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor1.1 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselvacuum processing vessel Capacity20 Ltr. (max. 38 Ltr.) Vessel sizesdia. 365x370 mm Flat top sidecheck With covercheck Top connectionsdia. 33 mm, dia. 34,5 mm Outletdia. 39 mm With jacketcheck With anchor stirrercheck (stirrer with scrapers: motor: 0,18 kW) With dissolver stirrercheck (motor: ± 1,1 kW: ± 2840 rpm) With homogenisercheck Motor1,1 kW: 2840 rpm Information Mounted on legscheck With switchcheck Weight410 kg Floorspace1,1x0,6 m Total height1,9 m Extra Specificationswith vacuum pumpProcessing vesselsFryma KorumaPr ...

General SKU412T1302 LocationBarneveld MakeFryma Maschinen GmbH Rheinfelden TypeMSM-12 No.M13585 Year of construction1989 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Vertical sandmillCoBall mill (1x) Capacity± 0.5 Ltr. Housing dimensions Dia 140x90 mm Inlet20 mm Motor3 kW (Loger DNGW-100) With variable speed drivecheck Rotor speed1100-2648 rpm Capacity5-40 Ltr./h (depending on product) With pumpcheck (Loher LP-A) Motor0,25 kW Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck ( as is) Floorspace1,4x0,8 m Total height1,65 m Weight310 kgSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced  ...

General SKU070C324 LocationBarneveld MakeFryma Maschinen AG Rheinfelden TypeMSM-12 No.F-086132 Year of construction1982 Material Housing materialMild steel Pressure Working pressure1.5 Bar Working pressure jacket0.5 Bar Main Features MaterialMild steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity0,54 Ltr Housing dimensions dia. 140x90mm, Rotor dia. ± 129mm With mechanical sealcheck With jacketcheck Motor3,0 KW, 220/380 Volt (IP44) With variable speed drivecheck Rotor speed± 1100-2650 Rpm Capacity10-20 Ltr/Hr (paint/varnish) Information Floorspace0,7x0,5 M Total height0,8 M Technical specs Extra informationRotor dia. ± 129mmSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready  ...

General SKU079G409 LocationBarneveld MakeChaudronnerie Tuyauterie Rhone-Alsace Feyzin No.845 Year of construction1996 Pressure Working pressure6 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4539 (904L) Stainless Steel Reactors Reactor(1x) Capacity11.000 Ltr Vessel sizesdia. 2400x1500mm Conical bottom(1500mm) Dished top sidecheck Manholedia. 500mm Top connections3x dia. 250mm Outletdia. 150mm Half coil jacketed(335 Ltr), Half coil in Duplex (1.4462) Max. temperature160 Degr. C. With paddle stirrercheck Motor15,0 KW, 220/380 Volt (Ex) Speed mixing shaftvariable Information Floorspace2,7x2,7 M Total height5,5 M ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmaceuticsRubberLubricants & ...

General SKU268K299 LocationBarneveld MakeRomaco AG Fryma Koruma Rheinfelden TypeCoBall mill MS-50 No.75439/00 Year of construction2000 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume9.8 Ltr. Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillAnnular gap bead mill (1x) Capacity9,8 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Max. temperature80 Degr. C. Motor55,0 KW, 400/690 Volt (Ex) Capacity150-1000 Ltr/Hr Information With switchcheck Floorspace2,1x1,0 M Total height2,3 M ATEX compatiblecheckSand millsRomacoMills > Sand millsBrand > Romaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU302N426 LocationBarneveld MakeBrabender OHG Duisburg TypePlasticorder PLE 330 No.183518 Main Features Volume0.03 Ltr. Motor2.3 KW Specified Features - Viscosity test machine Viscosity meterTorque Rheometer Motor3,3 KW, 220 Volt Variable speedcheck Speed10-250 rpm Analogue metercheck With recordercheck TypeServogor 320 With kneadercheck TypeW 30 H, with pneumatic feeder No.181510 Electric heatingcheck Capacity0,03 Ltr Information Mounted on framecheck With switchgearcheck Floorspace1.5x0.6 M Total height1.2 M Weight600 KGViscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit  ...

General SKU070C323 LocationBarneveld MakeFryma Maschinen AG Rheinfelden TypeMSM-32 No.M-10922 Year of construction1984 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume2.4 Ltr. Motor22 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity2,42 Ltr Housing dimensions dia. 350x210mm, Rotor dia. 340mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor22,0 KW, 380/660 Volt (IP54) Rotor speed± 580 Rpm Capacity90-180 Ltr/Hr (paint/varnishes) Information With switchcheck Floorspace1,4x0,8 M Total height1,7 M Technical specs Extra informationRotor dia. 340mmSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

General SKU300P663 LocationBarneveld MakeFryma Rheinfelden (CH) TypeVME-50 No.184.814 Year of construction1979 Main Features MaterialStainless steel Volume50 Ltr. Specified Features - Processing vessel MaterialStainless steel Closed stirring vesselcheck Capacity50 Ltr Vessel sizesdia 450 mm x 400 mm Flat top sidecheck With covercheck Top connections1 Outletdia 25 mm With jacketcheck With propellor stirrercheck With anchor stirrercheck With dissolver stirrercheck Information Mounted on legscheck With switchgearcheck Weight620 KG Floorspace1,4x0,8 M Total height2,2 M Extra SpecificationsThe machine is missing parts from the homogenizer (suction tube, stator and adjustment device that moves the stator up and down, the adjustment itself is present). Processing vesselsFrymaProcessing vessels > Processing vesselsBrand > Fryma What you can expect from Foeth: -- Mac ...

General SKU016G043 LocationBarneveld MakeFryma AG Rheinfelden TypeMSZ-12 No.M-15149 Year of construction1991 Material Housing materialMild steel Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity0,54 Ltr Housing dimensions dia. 140x90mm With mechanical sealcheck With jacketcheck Motor± 3,0 KW, 380 Volt (Ex) With variable speed drivecheck Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck Motorcheck Information With switchcheck Floorspace1,0x0,6 M Total height0,8 M Weight200 KG ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwi ...

General SKU090W551 LocationBarneveld MakeBrabender Year of constructionunknown, With electric heating Main Features Motor6.5 KW Specified Features - Viscosity test machine Viscosity meterTorque Rheometer (1x) Motor6,8 KW Variable speedcheck Speed± 5-120 Rpm Information Extra Specifications- With 7 interchangable measuring heads Viscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU016G067 LocationBarneveld MakeFryma Maschinen AG Rheinfelden TypeMSZ-50 No.M-14190 Year of construction1990, Grinding chamber needs to be replaced Material Housing materialMild steel Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume6 Ltr. Motor45 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity6,0 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor45,0 KW, 380 Volt (Ex) With pumpcheck Motor0,75 KW, 230/400 Volt (Ex) With variable speed drivecheck Information With switchcheck Floorspace1,9x1,2 M Total height2,4 M ATEX compatiblecheck Extra Specifications-- RECONDITIONED -- ReconditionedSand millsFrymaReconditionedMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in  ...

General SKU016G068 LocationBarneveld MakeFryma Maschinen AG Rheinfelden TypeMSZ-50 No.M-14189 Year of construction1990 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume6 Ltr. Motor45 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity6,0 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor± 45,0 KW, 380 Volt (Ex) With pumpcheck With variable speed drivecheck Information With switchcheck Floorspace1,9x1,2 M Total height2,4 M ATEX compatiblecheck Extra Specifications-- RECONDITIONED -- ReconditionedSand millsFrymaReconditionedMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

General SKU274K293 LocationBarneveld MakeFryma Maschinenbau GmbH Rheinfelden TypeMSZ-12 No.M-12360 Year of construction1986 Pressure Working pressure2.5 Bar Main Features MaterialMild steel Volume0.5 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity0,5 Ltr With mechanical sealcheck With jacketcheck Rotor jacketed2 bar Motor2,2 KW, 220/380 Volt (Ex) Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck Motor0,08 KW, 220/380 Volt (Ex) With variable speed drivecheck Information With switchcheck Floorspace0,7x0,6 M Total height0,8 M ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

General SKU041H138 LocationBarneveld MakeFryma Maschinen GmbH Rheinfelden TypeMSM-12 No.L-14038 Year of construction1993 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Vertical sandmillCoBall mill (1x) Capacity± 0,5 Ltr Housing dimensions dia. 140x90mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor3 kW, 380 Volt (Ex) With variable speed drivecheck Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck With variable speed drivecheck Information With switchcheck With switchgearcheck (as is) Floorspace0,9x0,6 m Total height0,8 m Weight220 kg ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

General SKU300U892 LocationBarneveld MakeBohlin Instruments TypeGemini Year of constructionunknown Specified Features - Miscellaneous Motor220 volt Information Total height0,51 m CEcheck Floor space0,33x0,33 m Extra Specifications- Peltier system: A Peltier system is a thermoelectric device that can both heat and cool. In the context of a rheometer, a Peltier system is used to control the temperature of the sample being tested. - Advanced Rheometer, work range room temp 0°C/40°C, with Peltier system, temp range -40°C till 125°C. MiscellaneousBohlin InstrumentsMiscellaneous > MiscellaneousBrand > Bohlin Instruments What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKU354T1386 LocationBarneveld MakeFryma-Maschinen Rheinfelden TypeLVE-C Main Features MaterialStainless steel Motor0.55 KW Inlet diameter25 mm Specified Features - Deaerators De-aeratorcheck Vacuum de-aeratorcheck Vessel capacity±40Ltr. Vessel diameter320mm Cylindrical height420mm Conical height270mm With centrifugal discDia: 200mm Motor0,55kW, 220/380Volt, 2850rpm With vacuum pumpcheck Motor1,1kW, 220-240/380-415Volt, 2850rpm With product pumpFryma, NL15A Motor0,37kW,230/400Volt,1380Rpm With variable speed driveStröber, R17-1025-037-4 MaterialStainless steel 1.4571 (316Ti) Information Year of construction1993 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace1,5x0,9m Total height1,65m Weight230kg NumberM 15904DeaeratorsFrymaDe-aerators > DeaeratorsBrand > Fryma What you can expect from Foeth: - ...