renishaw pl system used for sale

PLASMA Suction and filtration system FILTERBLOC - TFK PL Series Special central suction and filter system for plasma smoke when burning and cutting the FILTERBLOC TFK PL series TUeV Certified manufacturer according to DIN EN ISO 15012 and CE drawing FILTERBLOC - TFK PLASMA 40/60/80 engine power 5.5/7.5/11 KW air volume 4000/5500/6200 m3/h filter area 124/186/248 m2 Dusting area 4x/6x/8x 84 liters Automatic jet cleaning system with welding smoke class W3 24 months warranty The price information refers to the TFK PL 40 naehere information on request; ready to use

Pierce Control Automation RUR 2500 P working range: 2.1 m x 6.1 m control: Burny 10 LCD Completely welded portal construction without screwed connections o linear guide in the transverse axis o AC servomotors (12 000 mm/min.) o Digital synchronization on the laeng axis o CNC control system BURNY 10 LCD Plus with touch screen o membrane keyboard o flyingmounted cutting buttons o Automatic initial adjustment of the plasma torch o voltage monitoring of the plasma torch height o 1 torch parking lot outside the cutting area o circuit breaker at the end of all axes 1 x Plasma Kjellberg 160i with manual gas console cutting up to 25mm qualifying cut Optional autogencan Completely factory-assembled machine assembly and commissioning ready for use

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

Pierce control automation RUR 2500 P Work area: 2.1 m x 6.1 m Control: Burny 10 LCD Fully welded Portal construction without bolted connections o LM Guide in the transverse axis o AC servo-motors (12 000 mm / min.) o Digital synchronization on the longitudinal axis o CNC control system BURNY 10 LCD Plus with touch screen o Membrane keyboard o 'Flying' bearing inserts o Automatic initial setting of the plasma torch o Voltage monitoring of plasma torch height o 1 burner parking outside the cutting area o Circuit breaker at the end of all axes 1 x plasma Kjellberg 160i with manual gas console Cut quality cutting up to 25 mm Optional autogen retrofittable Completely Factory reconditioned machine Installation and commissioning on request

CNC flatbed portal cutting machine with web control CNC 3000. plasma system Fabr. KJELLBERG HiFocus 160i and filter system Fabr. KEMPER. Working range: 2000mm x 4000mm portal bridge with double-sided, synchronised rack/pinion drive in longitudinal axis / play-free timing belt drive in transverse axis / guide track with cover and high-precision linear guide system on torsion stiffener aluminium profile / trolley with precision profile rollers / 3 pieces digital AC drive motors / switch gear control for the switch gear CNC control under Windows with 32bit processor, color screen 12.1 LCD TFT, interfaces V24 + USB, SATRONIK PLUS CAD/CAM programming software with all geometry functions (e.g. point, arc, circle, rectangle, long hole, etc.), functions (e.g. moving adjustment, stretching, chamfering, etc.), manipulations (e.g. turning, mirroring, etc.), SATOMATIC HV 150 PT arc height scan  ...

; and cutting as new, Demonstration

Portal bridge SATRONIK HD 4000 CNC web control CNC 3000M - driving along reference limit switch in X and Y direction - double-sided racks for existing track rails for cutting lengths of 13m (16 m racks) plasma inter Lock circuit for a plasma power source plasma system Kjellberg Fine Focus 800 , cut up to 80mm (cutting data see PDF) -suction-cutting table 3200 x 13200 mm - 2 tables a 1600 mm next to each other filter system type DOWNFLO DFPRO 12- ZU 562 (external installation) The system is under current . Dassembly and commissioning on request; ready for immediate use

Fine beam plasma cutting system HD 3070 with manual gas console incl. Arcwriter hose package suitable for 3m x 8m systems; ready for immediate use

Guide machine Manufacturer: SATO Type: SATRONIK G 1500 Control: CNC 3010 Size: 4000 x 1500 mm Year of construction: 2008 operating hours: 8,090 h (machine on) plasma plasma Source Manufacturer: Kjellberg Type: Hi-Focus 280i Additional equipment: Automatic gas control PGV 3 Year of construction: 2008 operating hours: 728 h (plasma jet on) suction system Manufacturer: Donaldson Type: Torit DCE, DFPRO 6-CYCLO Year of construction: 2008 to visitunder electricity Very good condition mining and commissioning on request; ready for immediate use

CNC plasma cutting system Esab Pegasus Working area: 4x2m Esab Precision Plasma 100A, with PT24 burner automatic gas mixing console (+1 complete, new gas mixing console as replacement), complete documentation; in good condition, without suction many new and original slip parts (Duesen; electrodes), as well as other spare parts. assembly and commissioning on request; ready for immediate use

CNC plasma cutting machine Euen, 2 x 3 m, year of construction Dec. 2004, Type: Eu-SPP- 2000/3000 PF b with double-sided Bosch-Laengs drive. CNC control: ANC, M767F with DNC interface for CAD/CAM systems, complete system with plasma fine beam cutting system Kjellberg FineFocus 800 to 80 mm (up to 45 mm hole piercing and quality cut), Kemper fuel table and suction filter unit, CAD/CAM system and Buero PC with DNC transfer, year construction year: Dec. as (new price of the plant 140,970 EUR) Price VB EUR +VAT from location; very good condition, as good as new

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

Sato LS 2500 CNC 3010 working range: 2000mm x 4000mm 1 x Plasma 280i Kjellberg with automatic gas console Recommended cutting range from 0.5 to 50 mm Materialstaerke (HiFocus 280i) with suction system very good condition, on request ready for immediate use

Cr Advanced Working area 2m x 6m 1 x Plasma Hypertherm HD 3070, cut up to 20mm 1 x Arcwriter marking function Cad Cam Software including suction assembly and commissioning on request; ready to use

CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use

Sato LS 2000 Working Range: 2000mm x 6500mm CNC 3010 Topaz Touch Screen 1 x Plasma Ultra Cut 200 ( Cutting up to 35mm ) Donaldson Suction System. To visit . Installation and commissioning on request; ready for immediate use

Plasma cutting system / power source Manufacturer: Kjellberg Type: PA-S47 CNC Year of construction: 1994 Cutting power: 40-130 A Quality section: 35 mm Cut: 45 mm Gas console: PV-S75W-1 without hose package .

Sprueh cleaning system for small to medium batches, for workshop, maintenance or interim cleaning, cleaning with hot water, spruehkabine as top - loader abhaenging of model: basket diameter 820 - 1250 mm, load capacity 80 - 300 kg, spruehdruck 1.8 - 3.5 bar, heating 4.5 - 12 kW, optional: thermostat 0 - 90,Timer, oelskimmer, filtration, be- and unloading trolley; optional: thermostat 0 - 90,timer, oelskimmer, filtration, be- and unloading trolley; New

Esab CXD 3000 P Working range: 14000 x 2500 mm 2006 completely overhauled , new control system, new plasma system installed. 1x Plasma Plasmaarc 200 Cutting up to 40mm Burning table 2 x 6m inclusive Without burning tables , without filter system assembly and commissioning on request; ready for use

CNC Portal Plasma Cutting Machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Control: Vision DNC Connection track width: 2,500 mm runway: 5 m Working area: 2 x 3 m Extraction table 1 plasma torch with power source Kjellberg HiFocus 160i automatic gas console (see PDF) cutting tools: up to 25 mm filter cutting system: Columbus Immediately available ; ready for immediate use

Sato Satronik C 1500, Y.O.M. 98Control 801Travel distances 2500mm x 1500mmSuction table Kemper 3000mm x 1500mm, Y.O.M. 2012Extraction Kemper 8000, Y.O.M. 2012, but with 0 operating hours, for outdoor installation, with portable control panel, plasma source Hypertherm Powermax 1650,laptop with laptop with Lantek programing softwareAssembly and commissioning on request; ready for immediate use

Plasma cutting system with Hypertherm HPR 130 with automatic gas console cutting up to 20 mm Work area: 1500 x 3000 mm included filter system available under current mounting and commissioning on request

CNC plasma cutting system Work area: 1500 x 3000 mm OTC Super plasma 12000 Cut quality cutting up to 20 mm New control ProDNC from Micompan Data transfer via USB

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

Plasma cutting system with Hypertherm HPR 130 with automatic gas console Cutting up to 20mm Working range: 1500mm x 3000mm inlusive filter system Immediately available under current assembly and commissioning on request

Plasma extraction and filter system Filter BLOC TFK PL Series special central suction and filter unit for plasma smoke when burning and cutting the FILTER BLOC TFK PL series and CQC certified manufacturer according to ISO 15012 and CE drawing FILTER BLOCK - TFK PLASMA 40/60/80 Motor power 5,5 / 7,5 / 11 KW air volume 4000/5500/6200 m3 / h 124/186/248 m2 filter surface dust container 4x/6x/8x 84 liters Automatic jet cleaning system with testing for welding fume category W3 24 Months Warranty The price refers to the TFK PL 40 for further information on request; ready to use

CNC plasma cutting system knife Metalmaster working range: 8000mm x 2500mm Plasma: Hypertherm 260 Cutting up to 32mm very good condition immediately available with Donaldson filter system Including Cad/Cam software commissioning on request

CNC plasma cutting system blades Metalmaster Work area: 8000 x 2500 mm Plasma: Hypertherm 260 Cutting up to 32mm very good condition with Donaldson filter system now available Including CAD/CAM software commissioning on request

Microstep - EuroCut-P 3001.15 Working range: 1500mm x 3000mm plasma source Kjellberg HiFocus 160i with automatic gascosole cutting up to 25mm quality cutting suction Donaldson MD2-PLC + DFPRO 4 SPRK with an additional EX protection. Refurbished in 2016 All maintenance or repairs were carried out exclusively by the manufacturers (MicroStep and Donaldson). The prescribed maintenance intervals have always been adhered to. All maintenance and repairs are extensively documented. commissioning on request

Microstep - EuroCut-P 3001.15 Work area: 1500 x 3000 mm Plasma source of Kjellberg HiFocus 160i with automatic Gaskosole Cut quality cutting up to 25 mm Extraction Donaldson MD2-PLC + DFPRO 4 which with additional EX-protection. Refurbished in 2016 All servicing or repairs were solely by the manufacturer (Company MicroStep and Donaldson). The prescribed maintenance intervals were always met. All maintenance and repairs are extensively documented. Commissioning on request

Esab Combirex DX 3000 Working range: 2500mm x 4000mm 1x Plasma Support CNC Portal Plasma Cutting Machine Manufacturer: ESAB Type: Combirex DX 3000 Built: 2015 Control: Vision T5 Track width: 3,000 mm frame: 6000mm Working range: 2500mm x 4000 m suction table 1 plasma torch with power source m3 202 torch PT 36 Cutting rods: Punching: 38 mm Cutting: 45 mm laser pointer filter system ex protected cutting software: Columbus Very low operating hours commissioning on request

CNC Portal plasma cutting machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Governance: Vision DNC connection Track width: 2,500 mm Career length: 5 m Work area: 2 x 3 m Vacuum table 1 plasma torch Kjellberg HiFocus 160i power source automatic gas Console (see PDF) Cutting thickness: up to 25 mm quality section Filter system Cutting software: Columbus Now available

ESAB CXD 3000 P Work area: 14000 x 2500 mm 2006 completely overhauled, new controls, new plasma system installed. 1 x plasma Plasmaarc 200 Cutting up to 40mm 2 x 6 m including burning table Without firing tables, without filter system Installation and commissioning on request

CONTI-WELD PLASMA CUTTING EQUIPMENT TYPE 60 H CONTI-PAC -60 amp -Snijcapaciteit in staal 20 mm -Ingebouwde luchtdrukregelaar -Met toebehoren -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Kitzinger planks wash consists of: Transport system Stacking system Discharge stack system MFI Manufacturer: Kitzinger

CNC Portal Plasma Cutting Machine + Autogen Manufacturer: Messer Type: Omnimat L 5600 Built: 1999 CNC control: Omnicom Track width: 5,600 mm Career length: 25 m Working range: 4 x 22 m 1 plasma torch with hypertherm HD3070 power source 2 car-gene burners 1 powder marker Suction table Filter system Donaldson

CNC Portal Plasma Cutting Machine Manufacturer: Zinser Type: 2425 N Built: 2007 CNC control: CNC2050 1 plasma burner with power source Kjellberg HiFocus 160i Working area: 2x4 m Length: 6 m Table and filter on request

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

specifications: - air-cooled plasma cutter portable - Cutting current adjustable in 3 stages 20 - 60 A - Duty cycle 30 A / 100% ED - 60 A / 60% ED - max. cutting thickness - steel approx. 15 mm - Alu ca. 10 mm - Stainless steel approx. 8 mm - Pneumatic connection - Connection 400 V / max. 9 kVA - burner package - Ground cable - Space requirement approx. W 500 x H 750 x D 800 mm - Weight approx. 20 kg

working length: 8000 mm working width: 3500 mm Power: 300 A Plasma source: Nertajet type: HP 300 CNC burner heads: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: HS 4001.25 P Year of construction: 2003 CNC control: MSNC500P Working range: 2500 x 4000 mm 1 plasma torch with power source Kjellberg HiFocus 100 Filter system Kemper 8000

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L5000 Year of construction: 2000 CNC control: Fanuc Working area: 3000 x 6000 mm Extension possible 1 plasma torch with Hypertherm HT2000 power source 3 oxy-fuel burners without table without filter

Mezzanine SECOND-HAND GOODS Data: L : approx. 43.5 m B : approx. 12 m Lower edge of the stage : approx. 2.5 m Top edge stage : approx. 2.9 m Total area : approx. 522 sqm Load : 500 kg / sqm Lining : 38 mm clamping plate Support grid : approx. 4.3 x 2.8m incl. 2x stairs incl. approx. 44lfm railing incl. 2x transfer lock Used goods ex stock Wietmarschen ALL DIMENSIONS AND HEIGHTS UK STAGE / OK STAGE CAN BE ADAPTED TO CUSTOMER REQUEST IF REQUIRED! OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR NEEDS. --- Price: 52.200 € net 62.118 € gross You will receive an invoice with VAT shown.

Mezzanine SECOND-HAND GOODS Data: L : approx. 36 m B : approx. 12 m Lower edge of the stage : approx. 2.8 m Top edge of the stage : approx. 3.1 m Total area : approx. 432 sqm Load : 500 kg / sqm Lining : 38 mm clamping plate Support grid : approx. 4.3 x 2.8m incl. 2x stairs incl. approx. 36lfm railing incl. 2x transfer lock Used goods ex stock Wietmarschen ALL DIMENSIONS AND HEIGHTS UK STAGE / OK STAGE CAN BE ADAPTED TO CUSTOMER REQUEST IF REQUIRED! OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR NEEDS. --- Price: 43.200 € net 51.408 € gross You will receive an invoice with VAT shown.

Pharmaceutical, cosmetic, food and chemical stirrers / blenders Tripod agitator: VISCO JET® VJ200 - as good as new, unused because not ATEX The pilot plant agitator for research and production Can be used up to a container height of 500 mm, max. container diameter of 400 mm Manual lifting height adjustment, infinitely lockable, operation via touchscreen Safety switch for container clamping, emergency STOP switch. Including 5 different VISCO JET® agitators for low-, medium- and high-viscosity media Original price as offered (stainless steel roller table, touch screen, shafts and stirrers) was EUR 23.000,- net

Specifications: - Pipe diameter B 20 to 1200 mm - x – axis 3000 mm - Y - axis 1500 mm - Oxy-fuel + plasma operation - Plasma cutter Kjellberg PA – S40 CNC - mot. driven container turning device - Plant is mounted on steel plate - Space requirement approx. L 6000 x W 2900 x H 2900 mm - Weight approx. 10000 kg

CNC Plasma Cutting Machine Manufacturer: Messer Type: Metalmaster 3015 CNC control: Global Control S Year of construction: 2011 Retrofit 2019 Working range: 1,500 x 3,000 mm 1 plasma torch with power source Kjellberg HiFocus 280i

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...