rc 69 used for sale

2 Side Rotary creasing and slotting Machine, series 69175/60, Max: 1300mm, Min: 135x80mm, 100m./minute

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

Ser. No.: 071000312 Book Size: Book Block (mm): min. 120 x 120 // max. 360 x 320 Cover (mm): min. 120 x 250 // max. 360 x 696 Speed: 525 cycles per hour Equipment / Additional information: Adhesive: EVA hotmelt

For sale: Diosna spiral kneader W 240 - 3 boilers - Program memory - Speed control with an inverter - with the possibility to change the speed of the spiral/tool - boiler with tilting possibility - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

Turning diameter: 900 mm Turning length: 4500 mm Turret positions: 0 CNC Brand: Siemens CNC Model: Siemens Sinumrik Front and Rear chuck 885 mm Multi fix tool system Max. turning Ø:900mm X-Axis:        590mm Z-Axis:        4500mm Spindle bore:  355mm Speedrange:    500Rpm Spindle power: 45kW Pinole taper:  6Mk Stroke pinole: 300mm Quill Ø:       140mm Length:        6900mm Width:         2600mm Height:        2200mm Weight:        10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitut ...

Radial drilling machine make CSEPEL type RF 20Masch. -No: 69027Technical specifications:Technical specifications:Drilling capacity in steel: 40 mmDrilling performance in GG: 50 mmTapping up to: 50/60 mmThroat: 1600 mmQuill stroke: 300 mmSpindle mount: MK 512 spindle speeds: 45 - 2000 rpm.9 automatic feeds: 0.05 - 1.25 mm / rev.Column diameter: 360 mmsmall / large Spindle distance from base plate: 350/1420 mmPlaten size: 1675 x 930 mmPower of the drill motor: 3.0 kWtotal installed power: 4.97 kWWeight approx .: 3.2 twithout pictured cube tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

PROFROID QC LT 75 PK Brand:PROFROID Type:QC LT 75 PK Stock number:M21-1291 Cooling capacity:2.04 kW Application:Freezing Number of fans:1 Refrigerant:R744 (CO2) Voltage:230 Volts Motor power:0,25 kW Dimensions:1200 x 690 x 1028 mm Weight:185 kg Year:2018 New/unused Number in stock:1 piece(s) Price: Quotation request Description: New unused Profroid condensing unit with 2 scroll compressors. Mentioned capacity at an evaporating temperature of -32°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Radial drilling machine make CSEPEL type RF 22 / BMachine -No: 69085 built in 1969Technical specifications:Drilling capacity in steel: 40 mmDrilling capacity in GG: 50 mmTapping up to: 50/60 mmProjection: 1600 mmQuill stroke: 300 mmSpindle mount: MK 512 spindle speeds: 45 - 2000 rpm.9 automatic feeds: 0.05 - 1.25 mm / rev.Column diameter: 360 mmsmall / large Spindle distance from base plate: 350/1420 mmSize of the clamping plate: 1675 x 930 mmPower of the drill motor: 3.0 kWtotal installed power: 4.97 kWWeight approx: 3.8 tDimensions approx: 2540 x 930 x 2900 mmwith- electro-hydr. Central clamping- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

USED STAINLESS STEEL 2000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6845 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Cónico - Sup. klopper Vessel outside diameter 1300 mm Vessel height 1260 mm Vessel height + funds TOTAL: 3700 mm Technical characteristics: Motor characteristics: Power 2.1 kW Rotational speed 690 rpm Reducer characteristics: Rotational speed 15 rpm

Radial drilling machine make VEB Schmölln Bowes type BR 40x1250/1Machine -No: 691354Technical specifications:Drilling capacity in ST 60:40 mmDrilling capacity in GG 255 mmProjection: 1250 mmDrilling depth: 355 mmClamping area: 1450 x 920 mmRemove drilling spindle - base plate: 375 x 1375 mmBoom height adjustment: 750 mmLateral movement of the headstock: 950 mmDrilling spindle speeds: 20 - 1200 rpm.Feed range 6 x: 0.063 - 0.63 mm/revConnection value of the machine: 4.7 kWRequired space: 2050 x 930 mmHeight of the machine Transport height / max boom above: 2800 /3200 mmWeight approx.: 3000 kgColor greenwith- Dice table- new electricsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for you ...

CNC vertical travel stand machining center with 4th axis Table size 2380 x 5000 mm. Movement x-axis 1760 mm. Movement y-axis 500 mm. Movement z-axis 780 mm. table load 800 kg Number of tools in the magazine 36 pieces. Maximum spindle speed 10,000 1/min. Tool cone DIN 69871A-40. CNC control Heidenhain TNC 430 M. If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

Hydraulic Precision Cylindrical Grinding Machine make MARUS type HS 1/600Machine -No: 692 Year 1969Center height: 115 mmWorkpiece diameter max.:220 mmMaximum distance: 650 mmGrinding length: 620 mmWorkpiece weight max.:20 kgGrinding wheel size: 200 x 20 mmGrinding wheel speed: 2900 rpm.Clamping tool cone: MK 2Oil tank filling: 60 lDrive power: 1.1 / 2.2 kWWeight approx: 850 kgExternal dimensions approx: 1950 x 870 x 1450 mmWith- hydraulic slide feedxa0xa0infinitely variable 0 - 4 m / min.- Spindle drive hydraulically, stepless 100 - 500 rpm.- Hydraulically operated quick release devicexa0xa0with foot pedal operation- Grinding support height adjustable by 90 mm- Machine for the dry longitudinal grinding of rolls andxa0xa0Cylinders with covers made of rubber, synthetics, cork, glass,xa0xa0Ceramics and the like- Stepless control of spindle speed andxa0xa0carriage- suitable for grinding tens ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 810 M Operating hours: 15198 Technical data Number of axis total: 3 Table length: 2280 mm Table width: 450 mm Number of T-channels: 3 Distance of the T-slots: 150 mm T-channel width: 18 mm Longitudinal travel (X-axis): 2000 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 425 mm Tool changer: Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent pockets: 180 mm Tool lenght: 220 mm Max. tool-weight: 8 kg Spindle nose SK: 40 DIN 69871 Vertical spindle speeds: stepless from: 20 rpm up to: 10500 rpm Feeds: Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 18 kW Total power required: 31 kVA Machine´s weight about: 7200 kg Overall dimensions machine: Length: ...

For sale: Konig spiral kneader GYD 240 system as in Diosna - 3 boilers - after general overhaul - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

Surface grinding machine make TOS Hostivar type BPH 20 NFabr -No: 05218, built in 1960Working length: 700 mmGrinding width: 200 mmMagnetic plate: 600 x 200 mmgr. grinding diameter: 250 x 18 x 76 mmkl. Grinding diameter: 130 x 18 x 76 mmGrinding spindle slide Longitudinal movement: 690 mmGrinding spindle slide Cross movement: 225 mmFeed rates Table grinder longitudinal: 1 - 18 mm / minFeed rates Table grinding carriage transverse: 0.5 - 6 mm / minMax. Grinding wheel diameter: max 240 mmExternal dimensions L x W x H: 1800 x 1600 x 1600 mmDrive power: 4.3 kWWith:- Magnetic diskused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 140 mm Taper in spindle:: 5 MT Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1600 mm Various accessories: Tailstocks: 2 x Set of centers

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 425 Technical data Number of axis total: 3 Table length: 900 mm Table width: 530 mm Number of T-channels: 8 T-channel width: 14H7 mm Distance of the T-slots: 63 mm Table load max.: 400 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 600 mm Vertical travel (z axis): 450 mm Spindle speeds: stepless from: 10 rpm up to: 6300 rpm Tool changer: number of tools: 22 with double gripper Spindle nose SK: 40 DIN 69871 Pull-Studs: DIN 69872 B Tool diameter: 80 mm Diameter with free adjacent pockets: 130 mm Tool lenght: 300 mm Max. tool-weight: 8 kg Time of tool changing: 5-15 sec Feeds: stepless longitudinal from: 2 mm/min up to: 10000 mm/min transversal from: 2 mm/min up to: 10000 mm/min verti ...

Surface grinding machine make WMW type SFW 200 x 600Fabr -No: 330690Technical specifications:Working area: 200 x 600 mmgr. adjustment in Y-direction: 230 mmgr. adjustment in X-direction: 690 mmgr. Distance between worktable and spindle center: 500 mmUsable table surface: 200 x 600 mmpermitted table load: 110 kpTable speed stepless: 2 - 18 m / minGrinding wheel size: 200 x 20 x 51 mmelectrical connection: 3 kWGrinding spindle drive: 1.1 kWOutside dimensions approx: 1500 x 1700 x 1900 mmWeight approx: 1.01 tWith- Electromagnetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

bore capacity in steel (diameter): 32,0 mm arm length: 310 - 820 mm workpiece height max.: 370 - 870 mm turning speeds: 75 - 1220 U/min spindle taper MT: 4 MK base plate: 825 x 690 mm threading: 24 M quill stroke: 250 mm quill feed: 0,1/0,16/0,25 mm/U travel x / y: 500 / 510 mm total power requirement: 2,25 kW weight of the machine ca.: 1200 kg. range L-W-H: 1470 x 750 x 2100 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - ...

Machine type MIG/MAG welding system Fabrikat Castolin Eutectic Type Derby 230 Connection voltage 3 x 400 Volt Setting range 25 – 230 amps Duty cycle 35 % ED at 230 Ampere 60% ED at 154 amps 100% ED at 120 amps Current setting 8 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 2-roller drive Fuse 16 amps Dimensions L x W x H 800 x 440 x 790 mm Weight 84 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SB 154 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 ...

Hydraulic keyseating machine make FRÖMAG type Rapida D RAD 63/600Fabr. -No: AKK84873 built in 1978Technical specifications:Groove width: 3 - 63 mmmax.groove length: 600 mmHole diameter: 10-500 mmFeed size: 0.01-0.5mmCutting speed: 0-22 m / minReturn speed stepless: 0-50 m / minLoad capacity max .: 30000 kgCutting force: 30000 NTable size: 460 x 690 mmOperating height: 1145 mmBase area: 1200 x 1800 mmFoundation depth: 760 mmDrive power: 8.77 kWWeight approx: 1680 kgWith- many draw numbers- many guide bushessecond hand:SPECIAL PRICE in stock as available - with lots of accessories!Control in need of overhaul: EUR 6.500, - Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWA ...

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...

Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine type: 4 TNV 98 T Engine No.: 180067 Motor power: 37.7 KW Cooling: Water-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator Type: ECP32.2S4C Gene. Item #: P217148 Generator power: 45 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 4 pole Delivery: Assembled Width approx. mm: Height approx. mm: Depth approx. mm: Tank: Design: Base frame tank with drip tray Width approx. mm: Height approx. mm: Depth approx. mm: Content / Litre: 100 Dimensions of th ...

Post turning machine make FEINBAU type PM 1-HUBFabr. -No: 3473Tip width: 165 mmTop height: 110 mmgr. circulation diameter over bed: 220 mmover cross slide: 110 mmSpindle bore: 23 mm3 spindle speeds by directly on theSpindle drive motor: 690/1380/2850 rpm.Drive motor 380 V,: 690/1380/2850 rpm.: 0.22 / 0.37 / 0.5 kWSpace required: 400 x 830 x 1170 mmWeight: 160 kgused, from a service release, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Recon Part Number: 1227 6988 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

CNC universal tool milling machine make STANKO type SMK 25/32Year of construction 1992Travel X: 510 mmTravel Y: 410 mmTravel distance Z: 400 mmSpindle mount DIN 6987 ISA 40Table surface: 800 x 400 mmPiece weight: 400 kgstepless speeds: 20 - 2000 rpm.Quill stroke: 80 mmFeed range: 1 - 3000 mm / minRapid traverse: 5 m / minDrive power: 11 kWOutside dimensions: 2600 x 2150 x 2130 mmWeight approx: 2000 kgWith- Point distance control HEIDENHAIN TNC 135- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Servo Module Bosch SM 10/20-TA SM 25/50-TA SM 17/35-TA Servo Module Manufacturer: Bosch Available types: Bosch SM 10/20-TA 520 V DC 10 A D802npu2i Price: 580€ Bosch SM 25/50-TA 520 V DC 25 A Price: 690€ Bosch SM 17/35-TA 520 V DC 17 A Price: 590€ Bosch SM 17/35 520 V DC 17 A Price: 590€ Condition: fully functional and ready for use Functional guarantee upon handover --ᐳ Please indicate in the inquiry which servo module you are interested in.

CNC tool milling machine make DECKEL type FP4 - 60Machine -No: 31902, built in 1992Working area X: 600 mmWorking area Y: 500 mmWorking area Z: 450 mmTool holder: SK 40 / DIN 69871-ASpindle speeds: 31.5 - 5000 rpm.Swivel range / vertical milling head: + - 45 °Spindle drive: 10 kWFeed all directions: 2 - 6000 mm / min.Rapid traverse: 6000 mm / min.Drive power: 7.5 / 10 kWConnected load: 19.5 kVAWeight: 4.3 tExternal dimensions: 3100 x 2400 x 2200 mmWith- Control Dialog 11- full protection cabin- rigid angle tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal tool milling machine make PRVOMAJSKA - MACMON type M 100Fabr. -No: 944 built in 1978Table longitudinal movement X: 310 mmSpindle traverse Y: 170 mmTable perpendicular Z: 340 mmSpindle mount: ISA 40Projection: 210 mm16 spindle speeds: 40 - 2000 rpm.16 feeds: 9 - 450 mm / minvertical clamping surface: 640 x 195 mmTable size rigid table Clamping area: 600 x 210 mmwith 4 T-slots alongTable size rigid table total: 690 x 380 mmDrive power: 1.5 / 2.2 kWExternal dimensions of the machine: 1066 x 1048 x 1800 mmWeight approx .:370 kgWith:- rigid angle table- different tool holders- Viceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine To ...

Supply Module Manufacturer: Bosch Available types: Bosch VM 60/EB 520 V DC 60 A Price: 690€ Bosch VM 60/EB-TA 520 V DC 60 A Price: 690€ Bosch SM VM 100/R 520 V DC 100 A Price: 1850€ Condition: fully functional and ready for use Functional guarantee upon handover --ᐳ Please indicate in the request which supply module you are interested in.

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 217 325 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 400 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...

Technical data Table length: 690 mm Table width: 270 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 375 mm Distance from vertical spindle to table: 400 mm Distance from horizontal spindle to table: 470 mm Table load max.: 60 kg Spindle speeds: stepless from: 50 rpm up to: 3150 rpm Taper in spindle: 40 ISO Feeds stepless: longitudinal from: 5 mm/min up to: 1000 mm/min transversal from: 5 mm/min up to: 1000 mm/min vertical from: 5 mm/min up to: 670 mm/min longitudinal: 2.4 m/min transversal: 2.4 m/min vertical: 1.6 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.2 kW Total power required: 5.1 kVA Machine´s weight about: 900 kg Overall dimensions machine: Length: 1500 mm Width: 1300 mm Height: 2000 mm Various accessories: Dividing attachment Coolant system Rigide table Universal table Vertical milling head Automatic central lub ...

Key data: 5000 Heidenhain, 1000 TNC 426, 5000

Table length: 5000 mm Table width: 1000 mm Longitudinal X: 5000 mm Cross Y: 1200 mm Vertical Z: 1500 mm Positions ATC: 60   CNC Brand: Heidenhain CNC Model: TNC 426 ATC Chain changer 60 positions 4e axis integrated in CNC Tailstock for 4e axis Renishaw 3D Taster Recent milling head rebuild BIG tooling package X-Axis:               5.000mm Y-Axis:               1.200mm Z-Axis:               1.500mm Table Length:         5.000mm Table Width:          1.000mm Table load:           10.000Kg Power on spindle:     29,6 kW Spindle speeds:       3000Rpm Spindle Taper:        50ISO/Bt/Mk Feed rate X-Axis:     10 ...

Four-column screw press make AGEO type SP 40/650Technical specifications:Pressure force: 40 tAchievable maximum pressure: 50 tSpindle diameter: 95 mmNumber of guide columns: 4Clear width between the columns: 650 mmInstallation height: 440 mmRam stroke: 345 mmTable surface: 650 x 550 mmPlunger surface: 580 x 250 mmPusher bore: 50 mmTable height: 690 mmDimensions L x W x H: 1800 x 1200 x 1800 mmWeight approx. 2210 kgWith- hydr. Rear lifting deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Capacity: 0 t Diameter: 0 mm Length: 0 mm CN sections bender Manual and Automatic mode for forming discontinuous radius shapes such as Ovals Volutes Ellipses Parabolas     Horizontal and vertical:H + V  Shaft Ø:               100mm Number of rolls:       3 Horizontal:            Yes  Vertical:              Yes  Resistance moment:     33CM³ Capacity flat:         100x 20 mm Capacity Tube:         114,3 x 3,6 Ø x mm Capacity bar:          90 x 5 mm Capacity T-Profile:    100 x 100 mm Capacity HEA-Profile:  120 x 58 mm Working speed:         2,5 - 5 - 7,5 mm/min. Length:  ...

Key data: 1020 , 600 , 700

Grinding length: 1020 mm Grinding width: 600 mm Grinding height: 700 mm Wheel diameter: 406 mm X – Travel:              1.020mm Y – Travel:              600mm Z – Travel:              700mm Table Length:            1.020mm Table Width:             700mm Table load:              1.500Kg Feed rate X-Axis:        25.000mm/min. Feed rate Z-Axis:        25.000mm/min. Grinding stone dimensions:406 x 50 x 127 mm Power:                   7kW Speeds:                  1450Rpm Length:                   ...

Key data: 900 _Unknown / Other, 4000 Rexroth VAM 10, 500

Grinding diameter: 900 mm Grinding length: 4000 mm Workpiece weight: 500 kg CNC Brand: _Unknown / Other CNC Model: Rexroth VAM 10 Centre height:           500mm Grinding Ø:              900mm Grinding length:         4.000mm Grinding stone dimensions:1000 x 305 x 150 mm Grinding stone speeds:   640Rpm Table inclasement:       6° Length:                  12.000 mm  Width:                   3.500 mm  Height:                  2.500 mm  Weight:                  29.000 kg 

Amperage range maximum: 0 A Amperage range minimum: 0 A Table Length:        1.220mm Table Width:         1.220mm Table load on 50 mm: 5.000Kg Table load on 200 mm:4.545Kg Table load on 400 mm:3.500Kg Table load on 600 mm:2.900Kg Table load on 1000 mm:1.850Kg Rotation table:      360000° Length:              2.000 mm  Width:               1.600 mm  Height:              1.800 mm  Weight:              2.000 kg 

Wire diameter: 320 mm Speed: 0 rpm Number of rolls: 0   X-Axis:                 320mm Y-Axis:                 245mm Z-Axis:                 220mm Table size L x W / or ø:695 x 590 mm Table load:             500Kg Length:                 2.000 mm  Width:                  2.100 mm  Height:                 2.100 mm  Weight:                 2.400 kg 

Drilling capacity: 40 mm Radius: 800 mm Spindle taper: 36   SPECIFICATIES Uitlading / arm lengte 800 mm Boor capaciteit 40 mm Boor capaciteit staal Ø 40 mm Boor capaciteit gietijzer Ø 50 mm Tap capaciteit M  M 36 Spindel pinole opname Mk  Sk 40 Spindel diameter Ø 195 mm Spindel pinole slag  200 mm Max. afstand spil - tafel  695 mm Tafel / voet afmeting lengte x breedte   1200 x 750 mm Vermogen  kW   5.5 kW Toeren - Snelheden - Stappen   2800 Rpm  

Hydraulic. Parallel cut hacksaw machine make KASTO type WBS 150/170Machine -No: 122 041 120369320 Year 1985Technical specifications:Cutting area round: 150 mmsquare: 150 x 150 mmrectangle: 150 x 170 mmin miter at 45 °: 100 mmSaw blade dimensions: 300 x 30 x 1.5 mm (bore 8.5)Working height: 695 mm2 stroke rates: 75/80 H / minDrive motor: 380 V, 0.75 kWDimensions: 800 x 800 x 1350 mmWeight approx. 170 kgColor: blue / whiteWith- Coolant device- Material vertical stress- Stepless oil-hydraulic cutting pressure control with lifting in idle stroke- Depth of cut can be determined by depth limit switch- rotating machine headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best  ...

Vertical band saw and band filing machine make JAESPA type AS 4Fabr. -No: 735401, built in 1973Technical specifications:Roll diameter: 420 mmCutting height under guidance: 450 mmCutting width: 400 mmBelt speed: 16 - 1600 m / minSaw band length: 3200 - 3400 mmTable size: 660 x 660 mmTable load: 350 kgSaw motor: 2.2 kWGrinding motorExternal dimensions L x W x H: 660 x 900 x 1920 mmWeight: 690 kgwith- Band saw welding machine BSO-16- grindstone- tiltable table- Attack- lighting- Emergency stop switchused, from a company liquidation,in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet thickness: 25,00 mm Bending length: 3100 mm Number of rolls: 4   SPECIFICATIES Besturing  SIEMENS PANEL Werking   Hydraulisch / Mechanisch Hydraulic3 of 4 rollenwals  4 roll Plaatdikte  25 mm Wals lengte in mm  3100 mm Max. wals dikte bij product Ø 2.500  20 mm Max. aanbuiging bij product Ø 2.500  10 mm Boven rol diameter   Ø370 mm Onder rol diameter    Ø370 mm Zij rollen diameter Ø260 mm Werk snelheid in M/Min.  0 - 4 M/min. AFMETINGEN Lengte  6950 mm Breedte  2180 mm Hoogte2100 mm  

Machine type Machining center universal BAZ Manufacturer Heller Model MCS-H / U 300 Year of construction 2002 Condition good (used) Specifications Bright MCS-H/U 300 Year of construction: 2002 Control: Siemens 840 D Workspace: Longitudinal stroke X-axis 1000 mm Vertical stroke Y-axis 800 mm Transverse stroke Z-axis 1100 mm Lifting position longitudinally to the center of the table MCS-H X-axis +500 to -500 mm Lifting position vertically over. Palettes. MCS-H Y-axis +120 to +920 mm Lifting position transverse to the center of the table MCS-H Z-axis +200 to +1300 mm Guidance system: Linear compact roller guide version Size 55 Transfer elements: Accuracy Ball Screws Diameter x Slope Diameter 50 x 20 mm Feed drive system: Three-phase servo motors Closed design Feed forces: X-axis at ED S3-40% 15000 N Y-axis at ED S3-40% 15000 N Z-axis at ED S3-40% 20000 N Positio ...

Turning diameter: 510 mm Turning length: 322 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Fanuc Oi Mate - TC Max. turning Ø:510mm X-Axis:        175mm Z-Axis:        330mm Spindle bore:  45mm Speedrange:    6000Rpm Spindle power: 15kW ATC / revolver:12 Chip conveyor: Yes  Length:        3.325 mm  Width:         1.600 mm  Height:        1.655 mm  Weight:        2.900 kg 

Pneumatically operated table top welding machine make DALEX type F 82-1Year 1972Rated power 50% ED: 10 kVAContinuous power: 7.0 kVAMaximum short circuit power: 42.2 kVAMaximum welding power: 33.7 kVAConnected load: 25.3 kVANumber of control levels: 10Working stroke stepless: 40 mmElectrode force: 5 - 90 kPArm distance min./max.: 118 mmPerformance sheet steel: 2.5 + 2.5 mmPerformance brass: 1.5 + 1.5 mmPower aluminum: 1,2 + 1,2 mmPerformance round bar: 8.0 + 8.0 mmWeight approx.: 110 kgOutside dimensions approx.: 1010 x 690 x 1120 mmWith- Asynchronous four-time control unit ZG 1-2used, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regard ...

Capacity: 0 t Diameter: 42 mm Length: 3000 mm Max.Tube Ø:        42mm Min. Tube Ø:       6mm Max. Wall thickness:2,5 mm Max. Bending radius:270mm Min. Bending radius:25mm Max. bending length:3.000mm 3e dimsion bending:360,000 mm/min. Power:             5.5kW Length:            4.700 mm  Width:             1.300 mm  Height:            1.600 mm  Weight:            3.750 kg