radial drilling machine used for sale

bore capacity in steel (diameter): 55,0 mm arm length: 1750 mm workpiece height max.: 1630 mm turning speeds: 19 - 1320 U/min bore spindles - Morse Taper: 5 MK engine output: 5,5 kW weight: 5 t range L-W-H: 2,4 x 1,0 x 3,55 mm feed movement: 475 mm floor plate size:: 1650x1000 mm feeds: 0,07-2,9 mm/U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50,0 mm arm length: 1.350 mm workpiece height max.: 1630 mm turning speeds: 19 - 1320 U/min bore spindles - Morse Taper: 5 MK engine output: 5,5 kW weight: 5 t range L-W-H: 2,4 x 1,0 x 3,55 mm feed movement: 475 mm floor plate size:: 1650x1000 mm feeds: 0,07-2,9 mm/U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Volume flow: 27,000m³/h, pressure increase: 3800pa, fan belt length: 3550mm, motor power: 55kW, available after June 2023.

v.v. clamping device

The lot is located on the 1st floor, accessible by stairs. There is no elevator. A forklift truck is available on site.

with saw blade

920 Watt

This lot has been tested for function.

920 Watt

lot consisting of: Omga radial arm saw and Ferrock FM16 drill press

920 Watt

Radial piston pump with pressure regulating unit ORSTA Radial piston pump: B5 - 5/16-L TGL 10869 p: max. 20 MPa ( 200 bar ) n: max. 1450 rpm pressure control unit: C00.1 x C00.1-G TGL 10888 5 - 5/16 - L drive bearing: C1L TGL 10870 p: max. 4 MPa ( 40 bar ) n: max. 2000 rpm shaft: Ø 22 mm, length: 38 mm groove width: 6 mm pump foot: 285 x 240 mm hole spacing: 220 / 200 mm hole diameter: Ø 18.5 mm New !hole spacing: 220 / 200 mmbr / hole diameter: Ø 18.5 mmbr /br /New ! Dimensions: 345 x 345 x 370 mm

SECOND-HAND RADIAL ARM SAW LYONFLEX - volt. 380/50

Description: cutting width: 450 mm with Accessories Approx. Onsite Dimension. (l x w x h): 600 x 600 x 1,500 mm, weight approx.: 150 kg

Specifications: - Drilling capacity into solid steel ST 60 40 mm - Drilling capacity GG 25 50 mm - Tapping ST 60 M 33 - Tapping GG 25 M 45 - Drilling spindle holder MK - Spindle diameter 55 mm - Quill stroke 200 mm - 18 drilling spindle speeds 35 - 1800 rpm - Drilling feeds 0.075 - 0.60 mm/rev - Height adjustment of the drilling column 450 mm - Drilling radius min / max 305 / 1005 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1900 x H 2800 x D 2300 mm - Weight approx. 1800 kg -with: -Auto. Selection of speeds + feeds - Tapping device - hydr. Columns + Boom Clamping - Coolant device - T – Vertical grooves on the left side of the machine

arm length: 1600 mm taper MK: 5 serial number: 14442 weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Rapid radials with - Advance - Thread cutting device - Tool holder with tools - Coolant system see pictures Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Workpiece height - max. 550 mm Table clamping surface 1530 x 750 mm Spindle holder MK 4 Projection 1000 mm Drill spindle stroke 170 mm Spindle speeds 38 - 2000 rpm Operating voltage 380 V Connected load 5.0 kW Machine weight approx. 2.0 t Space requirement approx. 2.0 x 1.6 x 2.1 weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 2,100 mm

Description: 1700W electric motor Cutting disc with a diameter of 210 mm Durable die-cast aluminum frame Swivel base adjustable in the range -45°/0°/45° Equipped with precise cutting lines for laser marking LEDs for excellent lighting Advancement that allows a cut of 340 mm with the base in the 0° position, setting the base in the 45° position allows a cut of 240 mm Maximum cutting depth: Disc inclined at 90°: 65 mm Disc inclined at 45°: 38 mm Equipped with cutting depth limiter. Extendable worktop The miter saw set includes a miter saw and two cutting discs with a diameter of 210 mm, equipped with 24 and 60 carbide cutting teeth. Approx. Onsite Dimension. (l x w x h): 600 x 500 x 500 mm, weight approx.: 15 kg

Description: • Radial arm saw • Voltage 220-240 V • Swiveling head, tilting head • saw blade diameter 290 mm • Motor 1.10 KW-2800 rpm • Transversal cutting capacity approx. 500 mm • Mounted on metal support, wooden working table with dimensions 800 x 800 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,000 x 1,500 mm, weight approx.: 100 kg

Description: Working speed:  ,250 - 2000 rpm ,  , Approx. Onsite Dimension. (l x w x h): 1,400 x 1,100 x 220 mm, weight approx.: 1,700 kg

Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used

Boom drilling machine KNUTH type KAB16 Masch. No. 44715 Year of construction 1987 Drilling capacity in steel 16 mm Drilling capacity max. 23 mm Spindle holder MK 2 Pinol stroke 80 mm Projection 550 mm Spindle speed 290 - 2330 rpm 12 steps Clamping surface 650 x 310 mm Distance between drilling spindle Clamping surface max. 890 mm Column diameter 102 mm Motor power 0.55 kW Mains connection 400 volts, 50 Hz Spindle speed via 12 V-belt steps - Drill head height adjustment via hand crank - Drill head swivels +/- 90- Drill head rotatable on the column and on the boom arm Space requirement L x W x H 1030 x 400 x 1000 mm Weight 140 kg very good condition; used

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Gebr. Drilling and mortising machine Hollow Mortizing Machine FIELDS MCD Motor power: 1.1 kW (380V) max. chisel insert: 25 mm Table length adjustment: 240 mm Table depth adjustment: 76 mm Vertical stroke: 175 max. wood height: 1,000 mm Drill Center Distance: 82 max. wood width: 160 mm Weight: 185 kg Information according to manufacturer incl. 2 chiseling tools Copy of instruction manual available Good original condition! From private workshop closure Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.