quick tech used for sale

Druckplatten - Entwicklungsmaschine / Plate Processor AZ FE Year 1999 - Serial-No. XX158 Working width max. 300mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Horizontal 5-axes CNC lathe Quick tech DT 42 DUO Year 2012 Control: Mitsubishi M70 Machine number: 3264 Weight: 3,400 KG 380 V, 60 HZ 15 KVA S1, S3, X, Y, Z, X 1, Z1 Maximum turning diameter: 42 mm Maximum turning length: 100 mm Spindle bore: 44 mm Speed: 4,000 rpm. Procedures: X: 200 mm Y: 250 mm Z: 235 mm X-1: 235 mm Z-1: 235 mm Bar feeder quick tech BFG 42 with LED display the rod length / position of the rod Year 2012 Machine number: 1154 Weight: 1800 KG 220 V, 60 HZ The machine can be visited at any time under power and is in a good condition. We love to hear from you.

This Quick Tech T8-Hybrid-YB Turning Milling machine was manufactured in the year 2021 in Taiwan. It is equipped with a Fanuc Series Oi - TF Plus control unit.

This QUICK-TECH Q5 Milling center was manufactured in 2018 in Taiwan. It is equipped with a Mitsubishi M80 control. This turning machine has a table size of 620 x 420 mm with a max. table load of 250 kg. The clamp type is BT30. The machine is still under power and can be inspected at any time. There are 4 units available of the same model and YOM at the same location.

Turning diameter: 200 mm Turning length: 500 mm Turret positions: 12 CNC Brand: Mitsubishi CNC Model: 900 T Max. turning Ø    200 mm X-Axis       200 mm Z-Axis        500 mm Spindle bore     52 mm Speedrange       4000 Rpm Spindle power         7.5 kW ATC / revolver           12 Control         Mitsubishi 900T Chip conveyor       Yes Dimensions Length       3.000 mm Width        1.500 mm Height       1.800 mm Weight       2.500 kg

Number of sanding units: 8 St. sanding width: 300 mm Sanding height max.: 100 mm Quickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine ---------------------------------------------------------------------- --------------------------------------- Maschine zur Längsholzbearbeitung - Lose Fasern werden von der Oberfläche entfernt - Erhebliche Reduzierung der Faserbildung nach der Grundierung - Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur - Bessere Tiefenwirkung im Holz - Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz - Stufenlose Einstellungen aller Geschwindigkeiten - Leichter Werkzeugwechsel durch abnehmbare Spindeln - Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite - Lieferbar auch mit weniger Schleifaggregate je nach Anwendung - Optionale PLC-Steuerung vorgesehen Einsatzmöglichkeiten - Fensterflügel-  ...

Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg

Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg

Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg

Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg

Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg

Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg

Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS

X-travel: 1200mm, y-travel: 800mm, z-travel: 700mm, max. load: 1.5t, rotational speed: 1-14,000/min, operational hours counter controls/ machine/ spindle: 41,351/ 133,865/ 60,163h. The Z-axis hums after switching on.

Voltage: 220V, including spare parts.

Opening dimensions: 550x300mm, tunnel length: 1150mm, connected load: 7kW, weight: 215kg, with conveyor belt and documentation.

SPECIFICATIONS: Max. machining width: 800mm Working height: 150mm Installed power Kw: 3.0 2 brushing units consisting of 4 counter-rotating brushes Ø250mm x 220 mm Transport carpet with speed control Controller

Manufacturer: Quickwood, Type: RO 1300/1T, Year: 2000, Control: yes, Number of units: 1, Working widht mm: 1300, Through running hight max mm: ca. 100, Through running hight max mm: ca. 100, kW output motor: ca. 3, Weight approx. kg: 1500, Required space L x W x H mm: 2180x1850x2100, Year :2000

Manufacturer: Quickwood , Type: Pro 1400 Elite, Year: 2008, Control: Pogramm , Number of units: 8, Working widht mm: 1400, Through running hight max mm: 100, Diameter of brushes: max. 350, Through running hight max mm: 100, kW output motor: 4x1,84, Feeding speed continous adjustable: yes, Weight approx. kg: 2100, Work piece width min-max mm: 1400, Min.-max. workpiece height in mm: 100, Year :2008

Professional automatic packaging system from a renowned German manufacturer. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. -Automatic welding frame movement (electromotive). -Perforation possible via 2 adjustable needle rings. -Roller holder movable. -Tunnel opening approx. 450 x 240 mm. -Maximum packing theoretically approx. 500 mm x 400 mm x 240 mm. -Maximum film roll width approx. 600 mm. -Adjustable product slot. -Machine with rollers movable and lockable. -380 V / 5.5 KW. A lot of setting options on the display: -Automatic operation / manual operation. -Tunnel temperature. -Welding time. -Cooling time/holding time during welding. -Transport time of the conveyor belt. -Transport speed of the roller chain. -Cycle time for automatic operation. Dimensions set-up approximate ...

Sewing machine motor, luminous flux motor, electric motor -Manufacturer: Quick, sewing machine motor type DM 0.5-4 -Power: 370 W -Speed: 1420 rpm -Voltage: 220/380 V 50/60 Hz -Transformer: sewing light 25 W -Shaft: Ø 14 x 30 mm -Dimensions: 245/240 / H280 mm -Weight: 12 kg

Max. Turning Dia. 100mm Max. Bar Working Dia. 65mm Max. Turning Length 230mm Collet Chuck Type KK6-185E60B Spindle Nose A2-6 Spindle Bore 66mm Max. RPM. 6000rpm Sub-spindle Capacity Max. Turning Dia. 100mm Max. Bar Working Dia. 30mm Max. Turning Length 100mm Collet Chuck Type KK5-173E42B Spindle Nose A2-5 Spindle Bore 31mm Max. RPM. 6000rpm C Axis Least Command Unit 0.001° Positioning Accuracy 0.02° Travel&Feed X1/Y1/Z1 axis 150 / 410 / 250mm X2/Y2/Z2 axis 450 / 380 / 300mm Rapid Feed 30m/min Repeated Positioning Accuracy 0.005mm Motor Main-Spindle Servo Spindle 11.0kw Sub-Spindle Servo Spindle 3.7kw X1/Y1/Z1 axis AC Servo 1.5k X2/Y2/Z2 axis AC Servo 1.5k Motorized Tool AC Servo 1.5k A.T.C System OD/ID Tools Main Spindle 6 / 5 OD/ID Tools Sub Spindle 5 / 9 Tool Shank Size □ 20mm Drill Holder Size (Main) ER-20 / Ø20mm

Quick Pack Shrink Hood Machine Year: 2020 On behalf of the customer

SECOND-HAND BRUSHING MACHINE QUICKWOOD RO1300/1T - CE RULES - volt. 380/50 - sn 8275 - year 2002

Description: serial number:  ,6297 dimensions of workpiece: height max. 100 mm width max. 300 mm length min. 380 mm length max. Infinity through feed speed 5-25 m/min spindle speed 200-1100 rpm spindle length horizontal 300 mm number of spindles (number of brush): 4 (8) standard IP54 power supply 380 V, 3PH/ 50Hz serial number: 6,297, Approx. Onsite Dimension. (l x w x h): 2,390 x 1,300 x 1,800 mm, weight approx.: 1,000 kg

Water-cooled grinding spindle motor for JUNKER Quickpiont 13.5 kW ,380/660 V ,25/14.5 A ,2940 rpm ,50 HZ

THE quick scope CNC offers the following advantages: coaxial -, through - and ring light illumination allows the user an optimal illumination of the workpieces to be measured. The powerful QSPAK software-based Windows® is easy to use and offers a wide range of measurement and analysis capabilities. Functions such as zoom, auto-focus, repeat mode, one-click Tools, graphical representation and 48 different macros solve measurement tasks quickly and easily. It only the joystick is. • ï?· measuring range: (X, Y, Z axis) 200 x 250 x 100 mm • ï?· type: QA 359 • ï?· resolution μ m: 0.1 • ï?· sensor type: color CCD • ï?· lenses: zoom type • ï?· magnification (optical): 0, 5 x-> 3, 5 x • ï?&mi ...

. Size C with cylindrical bore 40 / 50 mm .

Brand new quick seamstress of the brand Juki, with thread cut-out, glazing and presser foot ventilation, with lamp and 220 volt servo motor.

Hobart 305 GTP Dry Steam Fast Cooker Gentle, healthy cooking: steaming, steaming or blanching 3 different pressure levels 0 / 0.5 / 1 bar for individual adaptation to the food Extremely short cooking times Individual temperature program as standard: 50° - 99°C Electronically controlled program sequences Compact tabletop unit with built-in steam generator 1 cooking chamber for 3 x 1/1 GN up to max. 65 mm deep or 2 x 1/1 GN up to max. 100 mm depth or 1 x 1/1 GN up to max. 200 mm depth Multi-setting, the connection value can be reduced to 18.2 kW with hot water connection (power then approx. 550 servings/h) Automatic defrosting Water level controller with display Fully electronic control for time input Self-diagnosis with fault display Chamber pressure is displayed digitally Evaporation destruction with built-in wras condensation Automatic boiler emptying with drain pump a ...

Quick coupler, mounting frame, connects hydraulic circuits when changing tools from the driver's cab, in the shortest possible time, at the push of a button

Quick Frame Alpha 4 (Italy) Product name: Quick Frame Model: Alpha 4 Manufacturer: Alfamacchine (Italy) Sales: Bohle AG Serial no.: 46096 Year of construction: 2003 Condition: Used and tested technical details: for making picture frames Weight: 36 kg with foot switch for hardwood (oak), medium hard wood (ramin), softwood (pine, pine) necessary working pressure: 4 - 7 bar Pressure gauges Manual adjustment for working pressure incl. compressor (SIL. AIR, Italy) Operating instructions Spare parts list incl. bracket assortment (photo) Compressor data (SIL. AIR 30-9) Tank capacity: 9 L Flow rate: 50 L/min Pressure: 8 bar (adjustable) Year of construction: 06/1991 Voltage: 230 V Current: 2.4 A Power: 340 W incl. connection hose Device dimensions (L x W x H): 560 x 300 x 400 mm Our price: Quick frame: 890,00 € (EUR) FP plus VAT ex Grunow (Brande ...

High-speed milling spindle HENNINGER Type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Stem dimension 110 mm (machine spindle to tension nut Tool holder MK4 with tightening thread M16 Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12,5 / 13 / 14 mm Net weight 6,5 kg good condition; used

Quick-change tool holder, tool holder head, quick-change tool holder -Mounting dimensions: dovetail width 39 mm see photos -Price per piece -Quantity: 3 pieces -Dimensions: 86/38/H60 mm -Weight: 0.8 kg/piece

Quick change chuck, 3-jaw chuck, three-jaw chuck, power chuck, wedge bar chuck REISHAUER HF 150 H15 60597 Outer Ø: 150 mm bore: 39 mm, depth: 100 mm Height of jaws: 39 mm shaft: Ø 48 mm, length. 305 mm used, checked ! Dimensions: 467 x 150 x 150 mm

pneumatic quick release SPEEDY BLOCK 125/AP3 AO041 Clamping force: 160 / 70 daN Opening angle: > 90° Pmax.: 6 bar New, with documents ! Dimensions: 200 x 48 x 70 mm