push used for sale

Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach -Type: A 12 P9x2.3-36/126 -Item no.: 45 0276 114 1672 000 -Width: 12mm -Number: 3x broach available -Price per piece -Total dimensions: 1245/12/H24 mm -Weight: 2.5 kg/pc.

Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach -Type: B 6 J9x1.8 RL 24-72mm -Item no.: 45 0014 134 1260 000 -Width: 6mm -Number: 3x broach available -Price per piece -Total dimensions: 900/6/H13 mm -Weight: 0.5 kg/pc.

Manual trolley, push trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley, girder trolley, overhead trolley -Crane trolley: with electric chain hoist -Crane trolley: Demag gearbox type KS 7 motor 0.07 / 0.3 kW -Chain hoist: steel type ST 3216 - 12/3 2/1 -Load capacity: 3200 kg -Chain speed: 3/12 m / min -Lifting height: 6200 mm / 6500 mm -Number: 2x crane trolleys available -Price per piece -Dimensions: 1900/1500 / H1000 mm -Net weight: 375 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: adjustable -Payload: kg -Dimensions: see techn. Drawing with the photos -Dimensions: 240/262/H225 mm -Weight: 12 kg

Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Manufacturer: Balkancar, electric chain hoist with trolley -Load capacity: 125 kg -Main stroke 8 m/min -Delivery head: 12 m -Protection class: IP44 -Dimensions: 320/250/H660 mm -Weight: 31 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange, double pressure switch -Manufacturer: Johnsons Controls, double push button, unused in original packaging -Type: P78MCS-9300 -Price: per piece -Number: 7 pieces -Dimensions package: 130/130/H70 mm -Weight: 0.7 kg/piece

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: 120 mm -Payload: 1000 kg -Dimensions: 5480/120/H245 mm -Weight: 182 kg

Spur gear pulley block, spur gear chain hoist, manual chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley, bottom flange trolley -Load capacity: 5000 kg -Stroke: 4.0 m -Dimensions: 500/400/H800 mm -Weight: 165 kg

Spur gear chain hoist, spur gear chain hoist, hand chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Load capacity: 1500 kg -Travel distance: 4.8 m -Chain: with ring eyelet, without hook -Dimension: 260/300/H500 mm -Weight: 51 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Control panel with: EMERGENCY STOP push button -1 switch with: key -up to: 6 connections -Dimensions: 245/200/H965 mm -Weight: 12 kg

Hand control unit, EMERGENCY STOP device, hand wheel, push button, step switch, keypad, LCD display, axis control, electronic hand wheel, operating unit -The electronic handwheel comes: from a CNC machining center -electronic handwheel: Euchner -Type: HBLS072725 -Dimensions: 270/350/H150 mm -Weight: 3.3 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: max. 230 mm -Payload: 3000 kg -Number: 4x drives available -Price: per piece -Dimensions: 390/250/H200 mm -Own weight: 38 kg

Platform trolleys, transport trolleys, heavy trucks, table trolleys, assembly trolleys -Angled iron frame -Push-in sleeves at each corner -Heavy load transport trolley -Load capacity: 200 kg -Number: 20 pieces available -Price: per piece -Dimensions: 715/1210/H325 mm -Weight 34 kg / piece

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Carrier width: 90-295 mm -Payload: 1500 kg -Number: 1x drives available -Price: per piece -Dimensions: 590/295/H225 mm -Own weight: 21 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: 90-260 mm -Payload: 1500 kg -Number: 1x drives available -Price: per piece -Dimensions: 360/200/H290 mm -Own weight: 16 kg

Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Electric chain hoist with: chassis -Load capacity: 250 kg -Main stroke: 8 m/min -Fine stroke: 2.4 m/min -Hakenweg: 3.4 m -Dimensions: 385/500/H800 mm -Weight: approx. 40 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Number: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Own weight: 19 kg

Spur gear block hoist, spur gear chain hoist, manual chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Load capacity: 1000 kg -Max. Stroke: 4800 mm -Dimensions: 280/600/H190 mm -Weight: 38 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: 100-150 mm -Payload: 1000 kg -Number: 1x drives available -Price: per piece -Dimensions: 370/405/H340 mm -Own weight: 47 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: 90-180 mm -Payload: 3000 kg -Number: 1x drives available -Price: per piece -Dimensions: 320/330/H340 mm -Own weight: 50 kg

sheet width: 3060 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm back stop - adjustable: 5,0 - 1000 mm work height max.: ca. 820 mm cutting angle: 2,4 ° stroke: 7-12 p/min. down holder: 14 Stück operating pressure: 360 bar Control: ELGO oil volume: 200 ltr. voltage: 400 V total power requirement: 22,0 kW weight: 9000 kg range L-W-H: 4000 x 2300 x 2000 mm Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm zero-backlash ball screw for backgauge Backstop beam can be automatically tilted up in max. position Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - ...

heavy thickness planer REX HO-63 Constant machine table with adjustable table sliding rollers electr. Height adjustment of the upper part of the machine by means of a push button and man. Fine tuning Planing width 630 mm Planing height 280 mm Precision thickness gauge with magnifying glass display 4-knife shaft Table quadruple guided Adjustable under-table rollers Main motor 7.5 kW Feed rate 8 + 16 m/min Steel - Feed Roller Articulated pressure beam Machine is FUNCTIONAL in TOP condition From stock Lieboch

Very good condition sheet metal shear guillotine with little use https://www.baileigh/sheet-metal-shear-sh-5210 This hydraulic shear was one of the machines that got us started and built Baileigh’s quality reputation. With its welded steel frame, the SH-5210 sheet metal shear makes perfect cuts every time. 52” length. 10 gauge mild steel maximum capacity. Minimum capacity of 24 gauge mild steel. 5 hp motor runs on 220-volt single-phase power. Up to 28 strokes per minute. Adjustable 24” backgauge ensures precise repeatability. Front support arms and table guides keep the material square to the blade. 3 modes on the operator console: Inch mode: Jog the control and ease the blade down to the material. Single mode: Make one cut cycle per foot pedal push. Auto mode: Continue cycling as you hold the pedal down. This hydraulic shear comes standard with high ca ...

The thickness of the cut sheet is 0.5-4.0mm Decoiler with a lifting capacity of 25T coil outer diameter 508-610mm inner diameter circle 2000mm Slitting unit Width of the cut strip min 10.30mm Circular knives for cutting thicknesses of 5mm, 10mm, 12mm, 20mm, 25mm, 30mm 10mm, 12mm, 20mm, 25mm, 30mm wide push spacers Brake Winder inner diameter 508mm lifting capacity up to 16t. inner diameter max.2000mm

- Trolley speed 1-130 m/min -Return of the trolley 130 m/min - Pusher speed 1-60m/min. -Push return 60 m/min. -Dust extraction fi 200 mm, 115 mm. -Side loading -Elevator width 2200 mm -Total power 22 kW PRISMATIC 301 SPT is the automatic loading version with a raised table and a pusher with grippers. It is a machine that provides high speed in the execution of the cutting cycle, thanks to special double-sided grippers equipped with a lower retracting tab /Giben patent/, enabling the collection of a stack of panels from the lift without the use of other devices.

Machine dimensions Length 5840mm Width 1420mm Height 2180mm Weight 6600 kg Closing system Knee closure type Clamping force 210 t Ejector stroke 100 mm Mold height max 600 mm Mold height min 200 mm Clearance between columns 500 x 500 mm Injection system Screw diameter 52 mm Max injection pressure 175 MPa Max injection volume 548g Max injection speed 170 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push Robot connection Optional Apex robot Vickers hydraulic valves CNC control

Machine dimensions Length 4700mm Width 1300mm Height 1980mm Weight 1300 kg Closing system Knee closure type Clamping force 120t Ejector stroke 100 mm Mold height max 400 mm Mold height min 150 mm Clearance between columns 410 x 410 mm Injection system Screw diameter 41 mm Max injection pressure 158 MPa Max injection volume 188g Max injection speed 84 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control

Machine dimensions Length 3900mm Width 1200mm Height 1900mm Weight 3200 kg Closing system Knee closure type Clamping force 90t Ejector stroke 750 mm Mold height max 350 mm Mold height min 125 mm Clearance between columns 360 x 360mm Injection system Screw diameter 31 mm Max injection pressure 216 MPa Max injection volume 120g Max injection speed 53 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control

Mettler Viscometer complete case with all attachments. The Rheomat RM180: is a portable, easy to use viscometer, used primarily for quality control and product development. It can be used manually using simple push buttons on the keypad or using a personal computer and optional software. The Rheomat can use concentric cylinders, TV spindles and ISO 2555 measuring systems. It uses a rechargeable battery for portability or in the laboratory it has it’s own stand and power supply. The data is displayed on the Rheomats’ Liquid Crystal Display and can be downloaded to printer or personal computer. Displayed instruction is available in English, French, Spanish, German, Italian or Dutch. Typical applications for the Rheomat include cosmetics, food and coatings.

Parker Domnick Hunter LCMS 12/2-E nitrogen generator is suitable for use with both ionization modes of LCMS instruments. The generator employs a pressure swing adsorption technique to deliver continuous streams of clean, dry nitrogen and air without the need for secondary purification. Flow rates are 12 L/min nitrogen and 2 L/min air. When operating the LC/MS in positive ionization mode, nitrogen is used for drying, auxiliary and nebulizing gas. The generator also produces clean dry air for use as nebulizing gas in the negative ionization mode. Features: • Suitable for nebulizing, auxiliary and drying gas • Fully regenerative, proven durability PSA technology • Phthalate-free • Integral oil-free compressor (optional) • Soundproofed compressor box • Digital Interface • CE, UL and CRN approved • Global manufacturing support B ...

The cable peeling machine "MASTER 140" is suitable for peeling XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. In contrast to other underground cable machines, which usually only have one blade, the "Master 140" cuts with two blades at the same time – this saves you an additional pass if necessary. To push the cable halves apart, expansion wedges can be screwed on. Both blades can be individually adjusted to the desired cutting depth. Due to concave tension rollers, the cables are less compressed at the cut surfaces, cores from (lead) sheathed cables can be removed more easily. Specifications: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 Volt Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg

Bowl cutter Kilia 50l 3000 RS Express 50 liter stainless steel bowl Operation via push button 2 knife speeds 2 bowl speeds Mixing speed forwards and backwards 6 pcs. knife head 3 pcs. knife head Rated power 15 kW, total rated current 33 A Operating voltage 380 V / 50 Hz Weight approx. 950 kg

Emergency stop switch SIEMENS 3SB3 801-OEF3-Z 3x Switching element: 3SB3420 400 V 10 A 50 Hz switching function: 2 NC, 1 NO contact 1x Mushroom push button New ! Dimensions: 10 x 85 x 107 mm

Emergency stop switch, 2 pcs TELEMECANIQUE XAL K178 2x Switching element: ZEN-L1121 230 V 3 A 50 Hz switching function: 2x 1 NC 1x Mushroom push button New ! dimensions ( single emergency stop switch ): 68 x 68 x 94 mm dimensions ( packaging ): 140 x 70 x 100 mm

The MX-20 is a high-throughput planar radiography system that allows researchers to monitor animals quickly and affordably. This digital system can scan two to three animals at a time, depending on their size, and scans typically last 12 to 15 seconds. KV and exposure time settings can be easily changed using the computer screen or push buttons on the front of the unit. The MX-20 has geometric magnification capabilities up to 5X to provide ultra-high resolution images of small animals and specimens. The MX-20 has an energy range of 10-35KV and a tube current of 300uA. The focal spot size is

Pruning saw for removing defects from wood TechnologieCNC Optimizer CROSS CUT 306 4000mm Description/name of the machine: Sawing saw for removing defects from wood Manufacturer: TechnologieCNC Model: CROSS CUT 306 4000mm Optimizer Year of production: 2023 CROSS CUT 306 Optimizer 4000mm Saw 4 Meter Feeder A professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of woodworking machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs a transverse cut of the material into sections of a certain length with the elimination of material defects marked with a fluorescent crayon and with the help of a s ...

Scheugenpflug DOS P016 Piston Feeder Piston dosing system DOS P for a wide range of requirements The piston dosing systems from Scheugenpflug work according to the principle of volumetric dosing, i.e. the dosed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material by feeding it from the corresponding material conveyor system. If a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dosing pistons simultaneously push the two components in separate channels towards the exhaust valve, where they only mix in the static mixing tube to form a homogeneous reactive medium. The Dos P016 / 050 / 100 / 300 / TCA piston dosing systems are high-precision volumetric dosing systems designed for pr ...

Specifications: Tool holder: MK 4 Drilling capacity in ST 60: ø 25 mm Drilling capacity in cast iron GG 20: ø32 mm Tapping performance in ST 60: M24 Tapping capacity GG20: M30 Speed range: (12) 102 - 2000 1/min Spindle stroke: 150 mm Feeds: 0.1 / 0.2 / 0.3 mm/rev Table size: 1175 x 525 mm Column diameter: 170 mm Motor power: 1.1 / 1.5 kW Connection: 400 V Weight, approx.: 2200 kg Dimensions (WxDxH), approx.: 1300 x 1620 x 2270 mm Equipment: - Machined foot with T-slots - Feed device - R- L- Barrel - Tapping device - Emergency stop push button -Chuck -Vice - Machine wedge shoes - Swivel machine table - Dice table - Base plate with T-slots - Machine lamp

sheet width: 3060 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: 20 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° Control: DAC 310 total power requirement: 11.0 kW weight: 5450 kg range L-W-H: 3800 x 1940 x 1560 mm Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model DAC 310” Travel distance back gauge X = 750 mm Backlash-free ball screw for back gauge Speed 100 mm/sec - electrical cutting length limitation Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - ...

Specifications: Sawing area 90° round / flat / quad: 265 / 300 x 150 / 200 x 200 mm 75° left/right round / flat / quad.: 265 / 280 x 150 / 200 x 200 mm 60° left/right round / flat / quad.: 250 / 250 x 150 / 200 x 200 mm 45° left/right round / flat / quad: 200 / 200 x 100 / 180 x 180 mm 30° li round / flat / quad: 130 / 130 x 100 / 125 x 125 mm Cutting speed: 17 - 100 m/min Band saw dimensions: 3280 x 27 x 0.9 mm Working height: 950 mm Drive power: 2.0 kW Connection: 400 V Weight, approx.: 390 kg Dimensions, (LxWxH), approx.: 1580 x 930 x 1400 mm Equipment: - Can be swivelled left and right - Highly stable saw frame - Easy to use - Emergency stop push button -CE

Kemper Spiral Kneader Type: SP 125 A Specifications: 2 automatic timer switch-on and switch-off 2 speeds slow and fast with 3 stainless steel boilers Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All straps new New friction wheel Wear parts all new Engine mounts all new Push button new Rollis new Hydraulic oil new completely repainted

Palletizer | Pallet Wrapper FMT • Year: 2015 • Speed: 20.000 Bph • Model: ANTARES • Push system • Interlayer system • Pallet storage • Pallet Wrapper ATLANTA • Model: MYTHO A • Type: Rotary table • Workable formats: Pallet 1.200x1.000 and half pallets • Safety protections

Specifications: Tool holder: SK 40 Travel X/Y/Z: 700 / 500 / 500 mm Speed range: 63 - 3150 1/min Spindle stroke: 100 mm Feeds: X,Y axis 16 - 800 mm/rev; Z-axis 8 - 400 mm/rev Rapid traverse: X,Y axis 3000 mm/rev; Z-axis 1500 mm/rev Angle table size: 900 x 500 mm Motor power: 12 kVA Connection: 400 V Weight, approx.: 2550 kg Dimensions (WxDxH), approx.: 1770 x 1880 x 2158 mm Equipment: - 3-axis digital display, Fagor - Rigid angle table - Machine lamp - Emergency stop push button - Operating tool - Machine shoes

Specifications: Tool holder: SK 40 Travel (X/Y/Z): 500 / 350 / 380 mm Speed range: 63 - 3700 1/min Feeds (X/Y/Z): 0.2 - 2.8 / 0.1 - 1.9 / 0.1 - 1.9 mm/rev Motor power: 8 kVA Dimensions (WxDxH), approx.: 1400 x 2000 x 1850 mm Equipment: - 3-axis digital display Heidenhain - Spindle protection - Hydr. Clamping device - Chip pan - Emergency stop push button

Specifications: Tool holder: SK 40 Travel X/Y/Z: 500 / 350 / 380 mm Speed range: 63 - 3700 1/min Spindle stroke: 100 mm Feeds X/Y/Z: 0.2 - 3.8 / 0.1 - 1.9 / 0.1 - 1.9 mm/rev Table size: 800 x 360 mm Motor power: 8 kVA Dimensions (WxDxH), approx.: 1370 x 1900 x 1860 mm Equipment: - 3-axis digital display Heidenhain - Spindle protection - Chip pan - Coolant device - Emergency stop push button

Specifications: Tool holder: MK 4 Drilling capacity: 40 mm Speed range: 56 - 1250 1/min Spindle stroke: 240 mm Feeds: 0.06 - 0.84 mm/rev Table size: 1040 x 380 mm Projection: 360 mm Column diameter: 240 mm Motor power: 6.5 kW Connection: 400 V Weight, approx.: 2300 kg Dimensions (WxDxH), approx.: 1260 x 1806 x 2820 mm Equipment: - Feed device - Drilling depth stop - Coolant foot - Emergency stop push button

Used Bottle Inspector GF HAWK 24 000 BPH Characteristics of the machine and of the products handled It is made through traditional commands push button panel PC hardware video keyboard and mouse Traditional commands In order to allow quick and safe intervention by the operator the controls have been provided of a traditional type for example machine stop machine running etc PC hardware The machine is equipped with the main hardware elements of the PC such as video keyboard mouse Ambient temperature In order not to jeopardize the safety and optimal operation of the machine follow the values indicated storage temperature from 10 to 60 C ambient operating temperature from 10 to 45 C temperature inside panels Power electrical cabinet electrical power cabinet temperature t MAX 45 C obtained with a ventilated cabinet Vibrations The machine was designed and built in compliance with the directiv ...

Used Filling Monoblock for Wine Bertolaso 15000 BPH 2001 Rinser Automatic CALIPSO 63mm 2 450mm rotary rinser with 63 spray nozzles that penetrate 90mm deep into the bottle 2 channel rinser for steam sterilisation Support structure completely covered with AISI 304 stainless steel sheets AISI 316 stainless steel gripper elements with jaws made of food grade material AISI 316 stainless steel spray nozzles and spray valves Stainless steel drip tray with drain line pressure reducer for rinsing agent total treatment time at 15 000 bph 12 seconds Filler Low vacuum filling machine model ENOICA 72 2800 mm with 72 filling valves Ring bowl completely made of stainless steel AISI 304 bowl bottom with slope filling valves completely made of stainless steel AISI 316 Electric filling bowl height adjustment by push buttons on the control panel of the machine Electronic filling level probe Endress Hauser ...

Used Dairy Complete Line PET for water and Milk 9000 BPH 2010 Milk bottling line FRESH Milk bottling line Blower unit Blow Molding Machine SMIFORM SR6 Cavity rotary type This Milk bottling line has a neck of 38 plastic cups and is complete with all the auxiliary equipment for production like tilting lifting orienting preform and a chiller unit for cooling the mold section of the blower This Milk bottling line was used really little time only one shift two days a week and regular maintenance from skilled technicians Filling unit of the Milk bottling line With this blower unit in this Used Dairy Complete Line PET we have Triblock Metalnova making PET GLASS with double capping Plastic screw as part of the Monoblock and also Capper Twist Off stand alone for this Milk bottling line That allows the buyer to work both with Used Dairy Complete Line PET ultraclean solution in this Milk bottling l ...